visdude
Legendary
 Offline
Activity: 1081
Merit: 1001
|
 |
February 27, 2014, 10:36:04 PM |
|
I run these overclocked to 2 ghs (clock=x0981). Do these run stable at higher overclock to 2.2?
no 2.0 is easy . 2.2 is meh lots of errors only some do it. overheat easy . they want a voltage boost to go above 2.0 . so bigger heat sink different resistor more power needed. the chips are in a s-1 64 chips do 180th. that is 2.8125 gh . with fans and all other parts an s-1 will do 180gh at 360 watts . that is about 5.6 watts a chip . at the k watt meter. when I over clock u-1's to 2 gh I pull about 3.2 watts at the k watt meter. you would need a really good hub . I believe the 19 port hubs give close to 3.75 watts at the port which may be 4.7 watts at the k meter. translation even a really good hub may only let you go to 2.4gh on the new stick I have exactly the same figure with my benchmark on the U1s -- 3.2W at the wall @ 2 GH/s. I have 38A on the 5V rail of the PSUs that I use to power the 49-port hubs so I can pretty much load them up to the gills...so to speak...with room to spare. My S1 draws 382W at the wall with the PSU (Corsair CX500) at around 85% efficiency (71% load on the 12V rail). |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4144
Merit: 7952
'The right to privacy matters'
|
|
February 28, 2014, 12:39:02 AM |
|
I run these overclocked to 2 ghs (clock=x0981). Do these run stable at higher overclock to 2.2?
no 2.0 is easy . 2.2 is meh lots of errors only some do it. overheat easy . they want a voltage boost to go above 2.0 . so bigger heat sink different resistor more power needed. the chips are in a s-1 64 chips do 180th. that is 2.8125 gh . with fans and all other parts an s-1 will do 180gh at 360 watts . that is about 5.6 watts a chip . at the k watt meter. when I over clock u-1's to 2 gh I pull about 3.2 watts at the k watt meter. you would need a really good hub . I believe the 19 port hubs give close to 3.75 watts at the port which may be 4.7 watts at the k meter. translation even a really good hub may only let you go to 2.4gh on the new stick I have exactly the same figure with my benchmark on the U1s -- 3.2W at the wall @ 2 GH/s. I have 38A on the 5V rail of the PSUs that I use to power the 49-port hubs so I can pretty much load them up to the gills...so to speak...with room to spare. My S1 draws 382W at the wall with the PSU (Corsair CX500) at around 85% efficiency (71% load on the 12V rail). yeah I have a better psu for the s-1's 2 draw 720 watts and hash 360 gh it is the fractal design platinum 1000 watt model |
|
|
|
iluvpcs (OP)
Sr. Member
Offline
Activity: 314
Merit: 250
:)
|
|
February 28, 2014, 01:17:52 AM |
|
OK - got my glitch fixed around 3 pm today (took me 4-6 hours to find a replacement PC with two NIC's to rebuild my Router that does Firewall, Spam Filter, Ad Blocker, Web Filter, reporting etc). Between that and my day job it was busy.
31 Packages shipped today around 6:30 pm (2 orders did not - 1 person PM'd and other person I have to PM yet tonight). I'll go through and PM the 3-4 people without emails, the rest should have gotten tracking #'s already.
I do have about 50 left, and I will follow up with 2-3 people who PM'd me those requests.
Towards the 500 next batch, I would assume they are the bigger heatsync, which means shipping box and quantity might change a bit due to design of box etc.
|
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 28, 2014, 01:29:43 AM |
|
Thanks for the fast turn around especially with everything going on. I was a bit surprised to see the U2's were the same speed. I was hoping they would be faster or maybe a dual chip like the BiFury device's. I hope they work on something like that next. OK - got my glitch fixed around 3 pm today (took me 4-6 hours to find a replacement PC with two NIC's to rebuild my Router that does Firewall, Spam Filter, Ad Blocker, Web Filter, reporting etc). Between that and my day job it was busy.
31 Packages shipped today around 6:30 pm (2 orders did not - 1 person PM'd and other person I have to PM yet tonight). I'll go through and PM the 3-4 people without emails, the rest should have gotten tracking #'s already.
I do have about 50 left, and I will follow up with 2-3 people who PM'd me those requests.
Towards the 500 next batch, I would assume they are the bigger heatsync, which means shipping box and quantity might change a bit due to design of box etc.
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
February 28, 2014, 03:09:40 AM |
|
I run these overclocked to 2 ghs (clock=x0981). Do these run stable at higher overclock to 2.2?
no 2.0 is easy . 2.2 is meh lots of errors only some do it. overheat easy . they want a voltage boost to go above 2.0 . so bigger heat sink different resistor more power needed. the chips are in a s-1 64 chips do 180th. that is 2.8125 gh . with fans and all other parts an s-1 will do 180gh at 360 watts . that is about 5.6 watts a chip . at the k watt meter. when I over clock u-1's to 2 gh I pull about 3.2 watts at the k watt meter. you would need a really good hub . I believe the 19 port hubs give close to 3.75 watts at the port which may be 4.7 watts at the k meter. translation even a really good hub may only let you go to 2.4gh on the new stick I have exactly the same figure with my benchmark on the U1s -- 3.2W at the wall @ 2 GH/s. I have 38A on the 5V rail of the PSUs that I use to power the 49-port hubs so I can pretty much load them up to the gills...so to speak...with room to spare. My S1 draws 382W at the wall with the PSU (Corsair CX500) at around 85% efficiency (71% load on the 12V rail). yeah I have a better psu for the s-1's 2 draw 720 watts and hash 360 gh it is the fractal design platinum 1000 watt model The CX500 is only 80 Plus Bronze rated but it is the only one I could manage to get for free. It actually cost me -$10 with a couple of Corsair gift cards combined with an instant discount at the Egg and have another rebate due for the current PSU. I make it a point to have a dedicated PSU for each miner for obvious reasons and besides, I am also now hosting them in different households so the flexibility of having a PSU for each miner is convenient and necessary. |
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
February 28, 2014, 03:16:03 AM |
|
OK - got my glitch fixed around 3 pm today (took me 4-6 hours to find a replacement PC with two NIC's to rebuild my Router that does Firewall, Spam Filter, Ad Blocker, Web Filter, reporting etc). Between that and my day job it was busy.
31 Packages shipped today around 6:30 pm (2 orders did not - 1 person PM'd and other person I have to PM yet tonight). I'll go through and PM the 3-4 people without emails, the rest should have gotten tracking #'s already.
I do have about 50 left, and I will follow up with 2-3 people who PM'd me those requests.
Towards the 500 next batch, I would assume they are the bigger heatsync, which means shipping box and quantity might change a bit due to design of box etc.
Thanks for the hard work and for making it happen. |
|
|
|
|
alh
Legendary
Offline
Activity: 1843
Merit: 1050
|
|
February 28, 2014, 06:23:34 AM |
|
Thanks for your quick shipping. I received my tracking info tonight. I think I can expect them on Monday or Tuesday. I guess I could hope them sooner, but that's just greedy.....  |
|
|
|
|
|
freddyfarnsworth
|
|
February 28, 2014, 09:03:27 AM |
|
Tracking received, Thank You.
|
BTC: 1F1X9dN2PRortYaDkq89YJDbQ72i3F5N3h MEOW: KAbvy9jrrajvN5WLo7RWBsYqYfJKyN9WLf DOGE: DAyKSrTiVeRZaReTu1Cyf5Je6qPdKTuKKE
|
|
|
|
TracerX
|
|
February 28, 2014, 02:30:00 PM |
|
I received my tracking number as well--cheers for the hard work!
|
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
February 28, 2014, 06:24:05 PM |
|
@ iluvpcs, my order was one of the early ones placed on Feb. 26th right after you confirmed that the units were in hand. To date, I haven't received a confirmation nor a tracking number from you. A peep from you regarding the status of my order would be nice as I'd like to know whether I should stay home either today or tomorrow to receive the package.
|
|
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
|
February 28, 2014, 06:29:39 PM |
|
I run these overclocked to 2 ghs (clock=x0981). Do these run stable at higher overclock to 2.2?
no 2.0 is easy . 2.2 is meh lots of errors only some do it. overheat easy . they want a voltage boost to go above 2.0 . so bigger heat sink different resistor more power needed. the chips are in a s-1 64 chips do 180th. that is 2.8125 gh . with fans and all other parts an s-1 will do 180gh at 360 watts . that is about 5.6 watts a chip . at the k watt meter. when I over clock u-1's to 2 gh I pull about 3.2 watts at the k watt meter. you would need a really good hub . I believe the 19 port hubs give close to 3.75 watts at the port which may be 4.7 watts at the k meter. translation even a really good hub may only let you go to 2.4gh on the new stick I have exactly the same figure with my benchmark on the U1s -- 3.2W at the wall @ 2 GH/s. I have 38A on the 5V rail of the PSUs that I use to power the 49-port hubs so I can pretty much load them up to the gills...so to speak...with room to spare. My S1 draws 382W at the wall with the PSU (Corsair CX500) at around 85% efficiency (71% load on the 12V rail). yeah I have a better psu for the s-1's 2 draw 720 watts and hash 360 gh it is the fractal design platinum 1000 watt model The CX500 is only 80 Plus Bronze rated but it is the only one I could manage to get for free. It actually cost me -$10 with a couple of Corsair gift cards combined with an instant discount at the Egg and have another rebate due for the current PSU. I make it a point to have a dedicated PSU for each miner for obvious reasons and besides, I am also now hosting them in different households so the flexibility of having a PSU for each miner is convenient and necessary. I am using this cheap PSU to power close to 75% of my 49-port capacity. Loaded with dualminers & antminers. http://www.newegg.com/Product/Product.aspx?Item=N82E16817339012You guys think this can take the full 49 ports with, say, 30 antminers and 19 dualminers ! If not, any cheap and reliable PSU you guys recommend? I remember philip sent me some details about using PSU for the 49-port hub. I will dig into that too. |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4144
Merit: 7952
'The right to privacy matters'
|
|
February 28, 2014, 06:49:41 PM |
|
stex2009 it is
very hard to get all 49 ports to work. I have a psu that does 42 with ease. I even have another 49 port hub not needed.
say the word and I can mail the hub and the psu. this hub has 39 -41 good ports with the psu.
I have 4 ant miner s-1's and some very good 19 port hubs that I am keeping.
pm me if you want the gear at a good price. I can ship the hub and the psu on sat .
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 28, 2014, 06:57:57 PM |
|
Thanks I had received my tracking info a night or two ago.
You really are fast even with all the havok you had that day. Much appreciated.
|
|
|
|
|
TracerX
|
|
February 28, 2014, 07:15:14 PM |
|
Thanks I had received my tracking info a night or two ago.
You really are fast even with all the havok you had that day. Much appreciated.
Mine arrived this afternoon, which is some sort of shipping miracle. Kudos to the man for being such a boss. |
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 28, 2014, 07:27:03 PM |
|
That is super fast! You cannot beat that kind of service. He would make a killing if he started selling the Ant S1's with that kind of shipping speed. Thanks I had received my tracking info a night or two ago.
You really are fast even with all the havok you had that day. Much appreciated.
Mine arrived this afternoon, which is some sort of shipping miracle. Kudos to the man for being such a boss. |
|
|
|
|
btcshiner
|
|
February 28, 2014, 08:28:07 PM |
|
Tracking number received. PM and payment sent for additional 10. Thanks!!
|
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
February 28, 2014, 08:38:23 PM |
|
Hello, I sent payment and required information on the 26th in PM for qty 2, can you verified information received and correct
Thanks
|
|
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
|
February 28, 2014, 09:02:33 PM |
|
Thanks I had received my tracking info a night or two ago.
You really are fast even with all the havok you had that day. Much appreciated.
Mine arrived this afternoon, which is some sort of shipping miracle. Kudos to the man for being such a boss. Thats fast! where u located? mine should arrive tomorrow it seems. |
|
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
|
February 28, 2014, 10:22:18 PM
Last edit: March 01, 2014, 05:54:15 AM by stex2009 |
|
|
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
March 01, 2014, 07:00:45 AM |
|
@ iluvpcs, is there a problem with my order which I place on the 26th (one of the early one's right after Phillip Ma's order). As I've stated earlier, you haven't acknowledge it nor have sent me a tracking number. So, what's the deal? Why the silent treatment? Do you normally do this to all your customers or just me and why?
|
|
|
|
|
|
