[ANN][MOON] Mooncoin: You know where it's headed! KGW exploit FIXED 4/3/2014

[eddied316]

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

yep. You can also use 127.0.0.1 instead of local host. both work though.

Make sure you set the rpcport in the conf file and the cgminer bat file.

[svennand]

So i just use this on multipool

stratum+tcp://pool1.eu.multipool.us:3358  ?

Is that right?

Cheers

that's what I have too

Is it confirmed that multipool moon EU server will work at launch?

Even if it doesnt set it up as your mail pool if thats the nearest. and fallback to US

Is this confirmed to be the right port and node address?

[IainKay]

A message to all users of HashAddicts.net:

Support is available from #HashAddicts on FreeNode.

If you cannot login to the website then please contact us on IRC and we'll get you sorted. We're also ensuring that any locked accounts are automatically, regularly, unlocked before the launch. If you cannot login then contact us, or try again in a little while.

Also, if you have visited both moon.hashaddicts.net and hashaddicts.net ltc pool, and logged into both, then clear all cookies before attempting to login to the moon pool again. If this doesn't work, contact support.

[singula]

How the heck pools know what kind of scrypt miner is gonna be used?

They'll know once they get and compile the source and plug it in their mining pools (so it may take a minute or two after the release for the pools to start functioning). But the devs have said in the first post "Algorithm: scrypt". So the algo is known in advance

If they'll put in some nasty surprise (like using scrypt-jane with some obscure parameters), then I'll guess the rocket won't make it to the moon and will just explode on the launch pad in a huge ball of fire.

[lucoia]

I present to you: Scryptminer.nl

• 1% fee, 0% for the first 20 miners ( claim in the support section ).
• VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
• 8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

Already set 5 people's fee to 0%, join fast and request your 0% fee in the support section!

ID 16, thanks

id 34 thanks!

id 48 registered and 2 miners already ready for the liftoff

[atp1916]

wow difficulty is already at 4.5.  Thank god I started when it was 0.02

What?

[bakedraccoon]

I present to you: Scryptminer.nl

• 1% fee, 0% for the first 20 miners ( claim in the support section ).
• VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
• 8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

We opened up extra spots for 0% fee, register now and claim your 0% fee through the support section.

[singula]

wow difficulty is already at 4.5.  Thank god I started when it was 0.02

What? It is already online? It started EARLY?

[svennand]

wow difficulty is already at 4.5.  Thank god I started when it was 0.02

What?

Lol someone is trolling

[killver]

wow difficulty is already at 4.5.  Thank god I started when it was 0.02

What?

troll

[LitecoinRates]

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

I wrote a solo-mining setup guide for QQcoin here: solo mining guide

It will basically be the same just change the ports (when confirmed), your UN and password (can be anything) and add node addresses.

[anoncoinpoolnet]

First 30 Users NO Fee



Stratum + VarDiff Mooncoin Pool | 0% Fee - http://weminemoon.com - Registration are opened!

setup your miners to: stratum+tcp://nl.weminemoon.com:3333


Server Info:

DDoS Protected Server
1Gbps Download/Upload
Intel Xeon E3-1240 | 8 x 3.7 Ghz
8,192 MB RAM
SSD Drive
99.9% Uptime
Since: 17th December 2013
Powereded By Linux - Debian


Stratum Servers:
Europe, Netherlands: stratum+tcp://nl.weminemoon.com:3333
USA, Los Angeles: stratum+tcp://la.weminemoon.com:3333


Why Us?
0% Fee Accepting only donations!
NO ADS
SSL Secured Website
DDoS Protected Server
Constantly improving and adding more features
Reward type: Proportional - When a block is found, the reward is distributed among all workers proportionally to how many shares each of them has found.

[customxyz]

I present to you: Scryptminer.nl

• 1% fee, 0% for the first 20 miners ( claim in the support section ).
• VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
• 8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

We opened up extra spots for 0% fee, register now and claim your 0% fee through the support section.

registered, claimed through the support section, messaged you, id = 50

[Cyriaque5962]

Sorry to ask again, will we need a .conf to mine this coin ?

[cointoss]

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

I wrote a solo-mining setup guide for QQcoin here: solo mining guide

It will basically be the same just change the ports (when confirmed), your UN and password (can be anything) and add node addresses.

Are you sure it's Scrypt Jane?

[eddied316]

I present to you: Scryptminer.nl

• 1% fee, 0% for the first 20 miners ( claim in the support section ).
• VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
• 8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

We opened up extra spots for 0% fee, register now and claim your 0% fee through the support section.

User ID 56. Thanks for 0%

[BC-Trader]

honestly what happened to the days a coin could come out and a pool would only show up hours later....now there are 20 pools ready to jump on this coin the second it's released....

probably will be forked to hell and back 

[bakedraccoon]

I present to you: Scryptminer.nl

• 1% fee, 0% for the first 20 miners ( claim in the support section ).
• VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
• 8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

Already set 5 people's fee to 0%, join fast and request your 0% fee in the support section!

ID 16, thanks

id 34 thanks!

id 48 registered and 2 miners already ready for the liftoff

ALL SET TO 0% ENJOY

[kcminer]

Which pool should we prefer?

Mooncoinpool.com

* 0% fee, PROP system (to help reduce server load on launch, and ensure its better than PPLNS)
* Close to 50Mh/s on launch (at least)!
* Vardiff for the big guns!
* High performance servers tuned to handle a coin launch.
* 2 professional nerds and 1 dipshit (me) available in IRC (@mooncoinpool or webchat) for any issues.
* Launching as soon as source is available, downloaded, and compiled.

Sign up and get ready now at Mooncoinpool.com.

Its time for BLASTOFF!!!

[TotalPanda]

1h