awais3344 (OP)
|
|
January 02, 2014, 10:33:30 AM |
|
I have asus 7950 with windows 7, and r9 280x with windows 8. R9 280x works fine with solo mining. But this 7950 with windows 7. It never fucking works. I tried blakecoin, monacoin, onlinegamingcoin and other so many coins with simple configs like listen=1 gen=0 rpcallowip=127.0.0.1 rpcuser=aaa rpcpassword=abc rpcport=8772 server=1 daemon=1 addnode=162.243.133.80 addnode=162.243.14.130 addnode=146.185.135.24 addnode=184.171.247.23 No matter what. This same file will work on my windows 8. Same fucking file wont work with windows 7. Client is running and has fully synced. I am able to pool mine. There is no typo and no errors. BUT IT WONT WORK Someone help me out Example onlinegamingcoin.conf file rpcuser=abb rpcpassword=abdc rpcport=52686 rpcallowip=127.0.0.1 daemon=1 server=1 gen=0 testnet=0 listen=1 addnode=62.4.12.38 cgminer. cgminer --scrypt -o http://127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192 It is stuck on "started cgminer 3.7 bla bla" for 2-3 minutes, then shows a few lines of errors probably some pool not found and then closes immediately.
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
Buratino
Legendary
Offline
Activity: 1151
Merit: 1003
|
|
January 02, 2014, 10:55:07 AM |
|
Where is your .conf file located in your Windows 7? It should be in <YourSystemDisk>\Users\<YourProfile>\AppData\Roaming\<YourMiningCoin>\.conf Try cgminer with less version number, e.g. 3.3.x Create run_mining.bat file in cgminer directory, add these lines into file: cgminer --scrypt -o http://127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192 pause Then cgminer window doesn't close immediately. Are you using separate wallet instance for every PC? If not, you should add rpcallowip=192.168.1.* in .conf, e.g. home network mask.
|
|
|
|
lonesoul
|
|
January 02, 2014, 10:57:08 AM |
|
Where is your .conf file located in your Windows 7? It should be in <YourSystemDisk>\Users\<YourProfile>\AppData\Roaming\<YourMiningCoin>\.conf Try cgminer with less version number, e.g. 3.3.x Create run_mining.bat file in cgminer directory, add these lines into file: cgminer --scrypt -o http://127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192 pause Then cgminer window doesn't close immediately. I think you might want to change the ip to have the port number of your actual config instead of the sample on you mentioned. 8772 otherwise it might just confuse matters ;-)
|
Please click this link-> https://mcxnow.com/?r=Stuartnorth (The link is a referral link, it costs you nothing, but provides a little bonus for me if you click through to the site. Please help feed my baby. Thanks :-) )
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:01:43 AM |
|
Where is your .conf file located in your Windows 7? It should be in <YourSystemDisk>\Users\<YourProfile>\AppData\Roaming\<YourMiningCoin>\.conf Try cgminer with less version number, e.g. 3.3.x Create run_mining.bat file in cgminer directory, add these lines into file: cgminer --scrypt -o http://127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192 pause Then cgminer window doesn't close immediately. hi, thanks for the reply. Yes. xxxcoin.conf is located in the correct xxxcoin folder in Appdata. I used cgminer 3.1.1 as well. Can you give me 3.3.x's download link and I will try that out that might work? Even though I doubt it will because same files and settings work on my windows 8.
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:03:32 AM |
|
Where is your .conf file located in your Windows 7? It should be in <YourSystemDisk>\Users\<YourProfile>\AppData\Roaming\<YourMiningCoin>\.conf Try cgminer with less version number, e.g. 3.3.x Create run_mining.bat file in cgminer directory, add these lines into file: cgminer --scrypt -o http://127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192 pause Then cgminer window doesn't close immediately. I think you might want to change the ip to have the port number of your actual config instead of the sample on you mentioned. 8772 otherwise it might just confuse matters ;-) I tried to use that port with correct coin
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:07:23 AM |
|
THIS.
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
|
Honourablequest
|
|
January 02, 2014, 11:13:22 AM |
|
I know how frustrated you must feel ... onlinegaming Use: rpcuser=xxx rpcpassword=x rpcallowip=127.0.0.1 rpcport=7998 daemon=1 server=1 gen=0 testnet=0 listen=0 addnode=62.4.12.38 addnode=62.4.13.198 addnode=219.153.36.203 addnode=93.89.117.211 addnode=141.0.117.16:52687 addnode=24.49.48.205 cgminer.exe --scrypt -o 127.0.0.1:7998 -u xxx -p x Note: The port changes - do exactly like this. PS: Ensure firewall open on this port. OGC: oQapgNmPa4kZtUEWB3gCaSbcQZygnEJ3DB
|
|
|
|
johnngbluntzky
|
|
January 02, 2014, 11:20:02 AM Last edit: February 04, 2014, 11:05:59 AM by johnngbluntzky |
|
don't know if this will help but i'll post it anyway, sent it to someone earlier who asked me how to do it;
goes like this, cuz i'm not sure what parts of the process you may or not be familiar with.
DOWNLOAD xxxcoin wallet.zip/rar -> EXTRACT-> open xxxcoinwallet-qt.exe -> let it FULLY SYNC *** if it does not detect a block chain source within 10 minutes, delete the extracted wallet folder, delete the appdata/xxxcoin folder, empty trash, and extract and run the xxxcoinwallet .exe again. it should sync eventually.
from there, once your wallet has FULLY SYNCED,
CLOSE WALLET -> BROWSE to user/appdata/roaming/xxxcoin
CREATE a text file in notepad inside of this folder, RENAME it to xxxcoin.conf (MAKE SURE file extensions -ARE- shown, this can be disabled/enabled in control panel-folder options)
ENTER TEXT into xxxcoin.conf; these details;
daemon=1 server=1 gen=0 rpcuser=USERNAME <<<--- SAME USERNAME AS WHAT IS ENTERED INTO CGMINER SCRIPT rpcpassword=PASSWORD <<<----- SAME PASSWORD AS WHAT IS ENTERED INTO CGMINER SCRIPT rpcallowip=127.0.0.1 port= WHATEVER YOU WANT.. i think (i always set it one number lower than RPCPORT) rpcport=XXXXXX <<<--- SPECIFIC TO EACH COIN, CHECK ORIGINAL POST OF XXXCOIN FOR THESE DETAILS addnode=XXXXXX <<<--- SPECIFIC TO EACH COIN, MAY OR MAY NOT BE NECESSARY, CHECK ORIGINAL POST
SAVE AS xxxcoin.conf in YOURPCNAME/APPDATA/ROAMING/XXXCOIN
NOW, BROWSE to xxxcoin wallet folder, containing xxxcoin-qt.exe CREATE a text file, NAME it start.bat RIGHT CLICK, EDIT FILE, INPUT; xxxcoin-qt.exe -server SAVE as start.bat (must be .bat, not .txt, make sure extensions are allowed to be shown)
RUN start.bat, you should see a CMD WINDOW pop up, and then the wallet will load and SYNC. Once the wallet is FULLY SYNCED RUN YOUR CGMINER SOLO SCRIPT, IT SHOULD LOOK LIKE THIS;
cgminer --scrypt -o 127.0.0.1:XXXXX -u USERNAME -p PASSWORD -I 12 -w 128
I also use these flags for my 3 R9 290X's
-I 20,18,20 -w 128 --thread-concurrency=32764 --temp-cutoff 96 --temp-overheat 94 --temp-target 80 --gpu-fan 40-100 --auto-fan --gpu-engine 1000,917,917 --gpu-memclock 1500 --gpu-powertune 20 -g 1 --lookup-gap 2 --no-submit-stale
so in the end xxxcoinsolo.bat file looks like cgminer --scrypt -o 127.0.0.1:XXXXX -u USERNAME -p PASSWORD -I 12 -w 128 -I 20,18,20 -w 128 --thread-concurrency=32764 --temp-cutoff 96 --temp-overheat 94 --temp-target 80 --gpu-fan 40-100 --auto-fan --gpu-engine 1000,917,917 --gpu-memclock 1500 --gpu-powertune 20 -g 1 --lookup-gap 2 --no-submit-stale
XXXXx (RPCport #), and username and password have to match the xxxcoin.conf file
run cgminer script, should say something about NO LONGPOLL FOUND, watch for block detection.. whether they are rejected or accepted, you are successfully solo mining. You can also use whatever extra cgminer flags in the script after the example.
|
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:22:31 AM |
|
I know how frustrated you must feel ... onlinegaming Use: rpcuser=xxx rpcpassword=x rpcallowip=127.0.0.1 rpcport=7998 daemon=1 server=1 gen=0 testnet=0 listen=0 addnode=62.4.12.38 addnode=62.4.13.198 addnode=219.153.36.203 addnode=93.89.117.211 addnode=141.0.117.16:52687 addnode=24.49.48.205 cgminer.exe --scrypt -o 127.0.0.1:7998 -u xxx -p x Note: The port changes - do exactly like this. PS: Ensure firewall open on this port. OGC: oQapgNmPa4kZtUEWB3gCaSbcQZygnEJ3DB Nothing worked I tried with other coins as well. Wonder how they work fine on my home pc. I completely disabled the firewall and my avast antivirus and still not working
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:25:07 AM |
|
don't know if this will help but i'll post it anyway, sent it to someone earlier who asked me how to do it;
goes like this, cuz i'm not sure what parts of the process you may or not be familiar with.
DOWNLOAD xxxcoin wallet.zip/rar -> EXTRACT-> open xxxcoinwallet-qt.exe -> let it FULLY SYNC *** if it does not detect a block chain source within 10 minutes, delete the extracted wallet folder, delete the appdata/xxxcoin folder, empty trash, and extract and run the xxxcoinwallet .exe again. it should sync eventually.
from there, once your wallet has FULLY SYNCED,
CLOSE WALLET -> BROWSE to user/appdata/roaming/xxxcoin
CREATE a text file in notepad inside of this folder, RENAME it to xxxcoin.conf (MAKE SURE file extensions -ARE- shown, this can be disabled/enabled in control panel-folder options)
ENTER TEXT into xxxcoin.conf; these details;
daemon=1 server=1 gen=0 rpcuser=USERNAME <<<--- SAME USERNAME AS WHAT IS ENTERED INTO CGMINER SCRIPT rpcpassword=PASSWORD <<<----- SAME PASSWORD AS WHAT IS ENTERED INTO CGMINER SCRIPT rpcallowip=127.0.0.1 port= WHATEVER YOU WANT.. i think (i always set it one number lower than RPCPORT) rpcport=XXXXXX <<<--- SPECIFIC TO EACH COIN, CHECK ORIGINAL POST OF XXXCOIN FOR THESE DETAILS addnode=XXXXXX <<<--- SPECIFIC TO EACH COIN, MAY OR MAY NOT BE NECESSARY, CHECK ORIGINAL POST
SAVE AS xxxcoin.conf in YOURPCNAME/APPDATA/ROAMING/XXXCOIN
NOW, BROWSE to xxxcoin wallet folder, containing xxxcoin-qt.exe CREATE a text file, NAME it start.bat RIGHT CLICK, EDIT FILE, INPUT; xxxcoin-qt.exe -server SAVE as start.bat
RUN start.bat, you should see a CMD WINDOW pop up, and then the wallet will load and SYNC. Once the wallet is FULLY SYNCED RUN YOUR CGMINER SOLO SCRIPT, IT SHOULD LOOK LIKE THIS;
cgminer --scrypt -o 127.0.0.1:XXXXX -u USERNAME -p PASSWORD -I 12 -w 512
XXXXx (RPCport #), and username and password have to match the xxxcoin.conf file
run cgminer script, should say something about NO LONGPOLL FOUND, watch for block detection.. whether they are rejected or accepted, you are successfully solo mining. You can also use whatever extra cgminer flags in the script after the example.
been doing that :p well this shit has cost me so much. I'd made more coins by solo. its way better for me. I know all the steps and done everything already. Works on windows 8 pc just fine
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:25:42 AM |
|
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
alphateam
|
|
January 02, 2014, 11:28:53 AM |
|
Try this
cgminer -a scrypt -o 127.0.0.1:52686 -u abb -p abdc -I 13 -g2 --thread-concurrency 8192
|
|
|
|
sserge009
|
|
January 02, 2014, 11:32:04 AM |
|
usially the most simple things are wrong. please check your rpcuser and rpcpassword in .conf file and in .bat file. are they the same?
|
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 11:36:04 AM |
|
usially the most simple things are wrong. please check your rpcuser and rpcpassword in .conf file and in .bat file. are they the same? yes, copied the same files to home, they work there. Problem is not in the files, I tried every coin out there. Problem is with something else on windows, which i cant figure thought someone here might know. well.
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
Buratino
Legendary
Offline
Activity: 1151
Merit: 1003
|
|
January 02, 2014, 11:46:58 AM |
|
Check running windows network services in Admin panel.
|
|
|
|
Honourablequest
|
|
January 02, 2014, 11:48:30 AM |
|
All very good advice given here The problem is thus not with your conf or bat files. It could be your wallet is not open in server mode - open before running the bat file.
|
|
|
|
Buratino
Legendary
Offline
Activity: 1151
Merit: 1003
|
|
January 02, 2014, 11:51:36 AM |
|
All very good advice given here The problem is thus not with your conf or bat files. It could be your wallet is not open in server mode - open before running the bat file. These parameters daemon=1 server=1 in .conf activate server mode.
|
|
|
|
awais3344 (OP)
|
|
January 02, 2014, 01:15:54 PM |
|
Check running windows network services in Admin panel.
what to look for exactly? could you explain a bit?
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ NEOSCOIN +POD Developers +Active Community - V2 Coming Soon! Live In-App Trading, Live Pool Stats - IRC - Arbitrush Anonymous System soon!! NEOSCOIN ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
|
|