[ANN] microCoin MRC - alcurEX - Scrypt-Jane - nFactor

[tygarbyte]

https://bitcointalk.org/index.php?topic=475569.0

microcoin compatible miner, should be able to get a 10% increase with this - but i cant figure out how to tweak it for R9 290 

Can you please post your command line? I can't figure out how to get it to work...

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe -o stratum+tcp://mrceu.nut2pools.com:6000 -u user.2 -p 2 --scrypt-chacha --starttime 1389028879 -d 0,1 -w 256 -g 1 --rawintensity 20480 --buffer-size 2800 --thread-concurrency 48460,48460 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0 --gpu-threads 1


this is what i have but its worse then the current microcoin miner. i dont understand too much about the parameters - below is settings from another microcoiner

"Here are the relevant settings I am using for my MSI R9-270 2GB to obtain 90-93khash/s on microCoin.  Hope it is useful.

--gpu-engine 1100,1100 --gpu-memclock 1200,1200 --rawintensity 5120 --buffer-size 1400 -g 1 -w 256 --lookup-gap 2
"

[halibit]

https://bitcointalk.org/index.php?topic=475569.0

microcoin compatible miner, should be able to get a 10% increase with this - but i cant figure out how to tweak it for R9 290 

Can you please post your command line? I can't figure out how to get it to work...

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe -o stratum+tcp://mrceu.nut2pools.com:6000 -u user.2 -p 2 --scrypt-chacha --starttime 1389028879 -d 0,1 -w 256 -g 1 --rawintensity 20480 --buffer-size 2800 --thread-concurrency 48460,48460 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0 --gpu-threads 1


this is what i have but its worse then the current microcoin miner. i dont understand too much about the parameters - below is settings from another microcoiner

"Here are the relevant settings I am using for my MSI R9-270 2GB to obtain 90-93khash/s on microCoin.  Hope it is useful.

--gpu-engine 1100,1100 --gpu-memclock 1200,1200 --rawintensity 5120 --buffer-size 1400 -g 1 -w 256 --lookup-gap 2
"

Me too.
Can't get better result than microcoin miner.

[DMacleod]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

[halibit]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

[DMacleod]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

You probably get HW errors don't you?

[halibit]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

You probably get HW errors don't you?

I dont see any. How I can check have I any?

Code:

 ybcminer version 3.3.1-yac2 - Started: [2014-03-15 14:29:54]
------------------------------------------------------------------
 (5s):255.5K (avg):250.5Kh/s | A:270  R:9  HW:231  U:7.0/m  WU:209
 ST: 1  SS: 0  NB: 95  LW: 1845  GF: 0  RF: 0
 Connected to mrceu.nut2pools.com diff 16 with stratum as user hal
 Block: a4dd9d7d9aa05a24...  Diff:75.8K  Started: [15:08:19]  Best
------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [
 GPU 0:  62.0C 3433RPM | 123.5K/123.0Kh/s | A:122 R:5 HW:118 U: 3.
 GPU 1:  97.0C 2811RPM | 128.4K/127.6Kh/s | A:148 R:4 HW:113 U: 3.

------------------------------------------------------------------

 [2014-03-15 15:07:22] Accepted f3fb76fb Diff 89/16 GPU 1 pool 0
 [2014-03-15 15:07:27] Network diff set to 75.8K
 [2014-03-15 15:07:27] Stratum from pool 0 detected new block
 [2014-03-15 15:07:51] Accepted ae42a722 Diff 36/16 GPU 1 pool 0
 [2014-03-15 15:07:53] Accepted 49a7b50e Diff 44/16 GPU 0 pool 0
 [2014-03-15 15:07:58] Accepted c7a291ce Diff 41/16 GPU 0 pool 0
 [2014-03-15 15:08:08] Pool 0 stale share detected, submitting as

 [2014-03-15 15:08:08] Accepted 39f683bf Diff 17/16 GPU 1 pool 0
 [2014-03-15 15:08:19] Network diff set to 75.8K
 [2014-03-15 15:08:19] Stratum from pool 0 detected new block

uups. Looks like my one GPU is melting ..
Well, good I have full warranty for that

Fixed. need to manually put max fan. For some reason auto fan not work for that gpu.

[DMacleod]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

You probably get HW errors don't you?

I dont see any. How I can check have I any?

Code:

 ybcminer version 3.3.1-yac2 - Started: [2014-03-15 14:29:54]
------------------------------------------------------------------
 (5s):255.5K (avg):250.5Kh/s | A:270  R:9  HW:231  U:7.0/m  WU:209
 ST: 1  SS: 0  NB: 95  LW: 1845  GF: 0  RF: 0
 Connected to mrceu.nut2pools.com diff 16 with stratum as user hal
 Block: a4dd9d7d9aa05a24...  Diff:75.8K  Started: [15:08:19]  Best
------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [
 GPU 0:  62.0C 3433RPM | 123.5K/123.0Kh/s | A:122 R:5 HW:118 U: 3.
 GPU 1:  97.0C 2811RPM | 128.4K/127.6Kh/s | A:148 R:4 HW:113 U: 3.

------------------------------------------------------------------

 [2014-03-15 15:07:22] Accepted f3fb76fb Diff 89/16 GPU 1 pool 0
 [2014-03-15 15:07:27] Network diff set to 75.8K
 [2014-03-15 15:07:27] Stratum from pool 0 detected new block
 [2014-03-15 15:07:51] Accepted ae42a722 Diff 36/16 GPU 1 pool 0
 [2014-03-15 15:07:53] Accepted 49a7b50e Diff 44/16 GPU 0 pool 0
 [2014-03-15 15:07:58] Accepted c7a291ce Diff 41/16 GPU 0 pool 0
 [2014-03-15 15:08:08] Pool 0 stale share detected, submitting as

 [2014-03-15 15:08:08] Accepted 39f683bf Diff 17/16 GPU 1 pool 0
 [2014-03-15 15:08:19] Network diff set to 75.8K
 [2014-03-15 15:08:19] Stratum from pool 0 detected new block

uups. Looks like my one GPU is melting ..
Well, good I have full warranty for that

Fixed. need to manually put max fan. For some reason auto fan not work for that gpu.

HW: 231

[halibit]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

You probably get HW errors don't you?

I dont see any. How I can check have I any?

Code:

 ybcminer version 3.3.1-yac2 - Started: [2014-03-15 14:29:54]
------------------------------------------------------------------
 (5s):255.5K (avg):250.5Kh/s | A:270  R:9  HW:231  U:7.0/m  WU:209
 ST: 1  SS: 0  NB: 95  LW: 1845  GF: 0  RF: 0
 Connected to mrceu.nut2pools.com diff 16 with stratum as user hal
 Block: a4dd9d7d9aa05a24...  Diff:75.8K  Started: [15:08:19]  Best
------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [
 GPU 0:  62.0C 3433RPM | 123.5K/123.0Kh/s | A:122 R:5 HW:118 U: 3.
 GPU 1:  97.0C 2811RPM | 128.4K/127.6Kh/s | A:148 R:4 HW:113 U: 3.

------------------------------------------------------------------

 [2014-03-15 15:07:22] Accepted f3fb76fb Diff 89/16 GPU 1 pool 0
 [2014-03-15 15:07:27] Network diff set to 75.8K
 [2014-03-15 15:07:27] Stratum from pool 0 detected new block
 [2014-03-15 15:07:51] Accepted ae42a722 Diff 36/16 GPU 1 pool 0
 [2014-03-15 15:07:53] Accepted 49a7b50e Diff 44/16 GPU 0 pool 0
 [2014-03-15 15:07:58] Accepted c7a291ce Diff 41/16 GPU 0 pool 0
 [2014-03-15 15:08:08] Pool 0 stale share detected, submitting as

 [2014-03-15 15:08:08] Accepted 39f683bf Diff 17/16 GPU 1 pool 0
 [2014-03-15 15:08:19] Network diff set to 75.8K
 [2014-03-15 15:08:19] Stratum from pool 0 detected new block

uups. Looks like my one GPU is melting ..
Well, good I have full warranty for that

Fixed. need to manually put max fan. For some reason auto fan not work for that gpu.

HW: 231

What settings you suppose

[zerxus]

What are the settings for Radeon HD 7950?
Seems I get HW errors with the recommended settings in the first post.

I use similar like that:
microCoinminer.exe -o    stratum+tcp://mrceu.nut2pools.com:6000 -u xxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 17

You probably get HW errors don't you?

I dont see any. How I can check have I any?

Code:

 ybcminer version 3.3.1-yac2 - Started: [2014-03-15 14:29:54]
------------------------------------------------------------------
 (5s):255.5K (avg):250.5Kh/s | A:270  R:9  HW:231  U:7.0/m  WU:209
 ST: 1  SS: 0  NB: 95  LW: 1845  GF: 0  RF: 0
 Connected to mrceu.nut2pools.com diff 16 with stratum as user hal
 Block: a4dd9d7d9aa05a24...  Diff:75.8K  Started: [15:08:19]  Best
------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [
 GPU 0:  62.0C 3433RPM | 123.5K/123.0Kh/s | A:122 R:5 HW:118 U: 3.
 GPU 1:  97.0C 2811RPM | 128.4K/127.6Kh/s | A:148 R:4 HW:113 U: 3.

------------------------------------------------------------------

 [2014-03-15 15:07:22] Accepted f3fb76fb Diff 89/16 GPU 1 pool 0
 [2014-03-15 15:07:27] Network diff set to 75.8K
 [2014-03-15 15:07:27] Stratum from pool 0 detected new block
 [2014-03-15 15:07:51] Accepted ae42a722 Diff 36/16 GPU 1 pool 0
 [2014-03-15 15:07:53] Accepted 49a7b50e Diff 44/16 GPU 0 pool 0
 [2014-03-15 15:07:58] Accepted c7a291ce Diff 41/16 GPU 0 pool 0
 [2014-03-15 15:08:08] Pool 0 stale share detected, submitting as

 [2014-03-15 15:08:08] Accepted 39f683bf Diff 17/16 GPU 1 pool 0
 [2014-03-15 15:08:19] Network diff set to 75.8K
 [2014-03-15 15:08:19] Stratum from pool 0 detected new block

uups. Looks like my one GPU is melting ..
Well, good I have full warranty for that

Fixed. need to manually put max fan. For some reason auto fan not work for that gpu.

HW: 231

My 7950 gives better results and no HW errors with -g 2 -i 12

[halibit]

You right -i 12 is limit for my gpu too 
Thank you 

[Bansheroom]

My settings:

R9 290 4 GB
microCoinMiner -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0

R9270X
microCoinMiner -w 256 -g 1 -I 16 --thread-concurrency 21568 --no-submit-stale --expiry 10 --gpu-memclock 1500 --gpu-engine 1100 --scan-time 1 --queue 0

0 HW errors with current n-factor

edit: Halibit, -i 12 is limit for me too, except with parameters above

[halibit]

My settings:

R9 290 4 GB
microCoinMiner -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0

R9270X
microCoinMiner -w 256 -g 1 -I 16 --thread-concurrency 21568 --no-submit-stale --expiry 10 --gpu-memclock 1500 --gpu-engine 1100 --scan-time 1 --queue 0

0 HW errors with current n-factor

edit: Halibit, -i 12 is limit for me too, except with parameters above

I see.
I have all GPUs 7950 model.
Looks like some one gives little more with -w 64 -g 1, but I 12 is still max for me.

Any way all that was good conversation. I spent 30% for my el bill without hw errors.

[Palaxidon]

Whats wrong with the mining'?? I only get rejected and '0' accepted shares

[Bansheroom]

Whats wrong with the mining'?? I only get rejected and '0' accepted shares

You must use the miner from the op, cgminer does not work with this coin.

[NoUseForACoin]

I am buying MRC.. if EXE can compare to VTC, certainly MRC compares well to EXE. (32 seconds instead of 45, ASIC resistant)

The doge like units also make it more psychologically practical to spend, and the design ensures more rarity at around the same time public interest gathers. The POS element in the wallet also indicates very positive changes in the future. Been buying and hoarding MRC for some time now. Way undervalued.

https://plus.google.com/+JamesClayton/posts/36G7H3QDfV2

Same here, glad I got some extra at 2 sat. MRC has to be the most undervalued coin at the moment.

I really think people with >10 mio mrc on mintpal should transfer some to poloniex to diversify and create a better environment at mintpal. It would be healthier for the coin to be on more exchanges. This giant btc-sellwalls look scary to investors.

http://imgur.com/RcrSM7s

This could be the time mrc finally gains some momentum, but if everybody cashes (visibly) out like that it may end as quickly. We've had a few of this pumps the last months, with no support they tend to decline fast.

got 14M and took down my sell wall down today.. hope that helps! This is indeed a very undervalued coin! We should follow MINT.

At least MRC scores high with 24hr volume changes in the coinmarketcap, so that may attract buyers

[bitcoin carpenter]

It will still take another 50k blocks or so before microcoin is dilluted over enough users to create the conditions where microcoin, and alcurex will blast off, maybe a bit earlier as speculators and whales see the pressure rise.

just mine and hold, mrc will have its day at 50+  soon enough.
and be careful if your playing the double up game in the low satoshis to increase your holdings, there are whales watching the number and preparing to eat you up before they move this coin up.

[zerxus]

We still need more votes at CoinedUp. Please add a comment.

EXEcoin was launched two weeks ago and it's already at CoinedUp.
Why are we so slow?

http://www.reddit.com/r/CoinedUp/comments/1xbqp0/please_add_mrc_to_your_exchange/?sort=new

[alexit873]

Good Microcoin to all of you!!!

Could someone that is good with microcoin script could tell me how much kh is getting with a 7950 and what settings is using(core clock, memory clock,voltage), thanks a lot!!!
I'm getting at the moment 95kh at 889 on core ,1287 memory and 0.987 voltage using aprox. 120w on a card.
Also i'm getting like 100W consumption on a h81 pro btc+celeron1820+ssd, isn't that to much?
How could a reduce the wattage on the idle system ?

^{--scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 --thread-concurrency 16384 --intensity 12 --worksize 256 -g 2 --gpu-engine 889,889 --gpu-memclock 1287,1287}


There are many questions but waiting for alcurex i think we could help each other to get better consumption and hash.

go go go Microcoin!!

[zerxus]

Who is removing messages from this chain?

At least 3-5 messages have been deleted during last 15 hours.

[halibit]

Who is removing messages from this chain?

At least 3-5 messages have been deleted during last 15 hours.

Do you remember what they wrote?