Bit-Tech (OP)
Member
Offline
Activity: 226
Merit: 10
|
|
April 12, 2014, 04:47:20 AM |
|
I had another SD card. I was able to get pcfli's image and put it on the card. From there boot back up and search for the IP using Angry IP. Then I was able to access the setup panel and get it all set. I had help from HolyScott as well. He had done this before. Now it is working well. I would like an image from Bit-Tech so I can have the original setup to test it with. An Update. I have it mining and it is doing well. It took a while. Bit-Tech do you have copies of the original image? The miner showed up today and I cannot get it to mine. The image on the card it came with does not even allow it to get an IP address. I tried a 2nd card with the generic pcfli image and I can now access the web interface and add my pool and worker info. It will not mine though. I have setup a ton of miners and this one just will not work. Any help would be great. Thanks
What did you have to do? Hi im sorry for the bad support, we promise to improve in this aspect. Minepeon works fine, you need to set default miner as CGMINER and it should work. minepeon.com
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 12, 2014, 04:56:35 AM |
|
Thanks for the information I appreciate that. I also appreciate you getting back to me so quickly as well as others here when we have questions. I will try out Minepeon tomorrow. I want to just let it run for now. Thanks also for the great blue case. I love blue that was a nice surprise. I had another SD card. I was able to get pcfli's image and put it on the card. From there boot back up and search for the IP using Angry IP. Then I was able to access the setup panel and get it all set. I had help from HolyScott as well. He had done this before. Now it is working well. I would like an image from Bit-Tech so I can have the original setup to test it with. An Update. I have it mining and it is doing well. It took a while. Bit-Tech do you have copies of the original image? The miner showed up today and I cannot get it to mine. The image on the card it came with does not even allow it to get an IP address. I tried a 2nd card with the generic pcfli image and I can now access the web interface and add my pool and worker info. It will not mine though. I have setup a ton of miners and this one just will not work. Any help would be great. Thanks
What did you have to do? Hi im sorry for the bad support, we promise to improve in this aspect. Minepeon works fine, you need to set default miner as CGMINER and it should work. minepeon.com
|
|
|
|
rezilient
|
|
April 12, 2014, 02:11:54 PM |
|
Thanks Mane, so to copy the new image do you just copy the files over using Windows? Or is there some software to burn the image file? I had another SD card. I was able to get pcfli's image and put it on the card. From there boot back up and search for the IP using Angry IP. Then I was able to access the setup panel and get it all set. I had help from HolyScott as well. He had done this before. Now it is working well. I would like an image from Bit-Tech so I can have the original setup to test it with. An Update. I have it mining and it is doing well. It took a while. Bit-Tech do you have copies of the original image? The miner showed up today and I cannot get it to mine. The image on the card it came with does not even allow it to get an IP address. I tried a 2nd card with the generic pcfli image and I can now access the web interface and add my pool and worker info. It will not mine though. I have setup a ton of miners and this one just will not work. Any help would be great. Thanks
What did you have to do?
|
You don't pay enough.
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 12, 2014, 05:50:52 PM |
|
Here are the links to the image and the software to build the image on the SD card. This is the 4 blade version of the image. I am not sure how it works on others but it did detect the blades indiviually so it should work for all of them. The IP it gave me was 192.168.1.163 https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z (7.9Gb image compressed to 570Mb) Once you unzip the image you need to use this program to mount it on the SD card. It can be restored/written to 8GB sd card with Win32DiskImager downloaded from here: http://sourceforge.net/projects/win32diskimager/I also recommend you create a backup card so if your main one fails you can just pop in the new one and mine right away. Once I play around with minepeon I will give you all and update and let you know how it goes. I hope this helps you. Happy Mining Thanks Mane, so to copy the new image do you just copy the files over using Windows? Or is there some software to burn the image file? I had another SD card. I was able to get pcfli's image and put it on the card. From there boot back up and search for the IP using Angry IP. Then I was able to access the setup panel and get it all set. I had help from HolyScott as well. He had done this before. Now it is working well. I would like an image from Bit-Tech so I can have the original setup to test it with. An Update. I have it mining and it is doing well. It took a while. Bit-Tech do you have copies of the original image? The miner showed up today and I cannot get it to mine. The image on the card it came with does not even allow it to get an IP address. I tried a 2nd card with the generic pcfli image and I can now access the web interface and add my pool and worker info. It will not mine though. I have setup a ton of miners and this one just will not work. Any help would be great. Thanks
What did you have to do?
|
|
|
|
dani
|
|
April 12, 2014, 09:30:47 PM |
|
Hi, you seem to have a legit business as I read replies with people receiving their units. How come you can afford to be a lot cheaper than anyone else? Others are charging 3600$ abd 3400$ in bulk AT BEST. Please enlighten me
|
Hai
|
|
|
albela83
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 12, 2014, 09:55:36 PM |
|
When is the shipping date and which address should I use for paypal. Looking for 2 units. thanks
|
|
|
|
Bit-Tech (OP)
Member
Offline
Activity: 226
Merit: 10
|
|
April 13, 2014, 05:10:10 AM |
|
When is the shipping date and which address should I use for paypal. Looking for 2 units. thanks
Hi we dont accept paypal fortunately anymore , they have been screwing around with us too much, besides we prefer BTC because we believe in BTC and we want to help the network effect , the mining industry is huge it should at least transact in business in BTC for the sake of Bitcoin stability.
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
April 13, 2014, 05:28:27 AM |
|
Am I reading this right ? 1tH/s @ 1kW rigs available for $2500 USD, shipping next day ?!
|
|
|
|
Powell
Sr. Member
Offline
Activity: 486
Merit: 262
rm -rf stupidity
|
|
April 13, 2014, 07:12:45 AM |
|
Sent you all an email earlier. Let me know.
|
|
|
|
Bit-Tech (OP)
Member
Offline
Activity: 226
Merit: 10
|
|
April 13, 2014, 11:58:26 AM |
|
Am I reading this right ? 1tH/s @ 1kW rigs available for $2500 USD, shipping next day ?!
correct we have 35 in stock left, and producing more as we speak.
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
April 13, 2014, 05:32:11 PM |
|
Am I reading this right ? 1tH/s @ 1kW rigs available for $2500 USD, shipping next day ?!
correct we have 35 in stock left, and producing more as we speak. Alright, I'll bite. Email sent.
|
|
|
|
jimrome
|
|
April 13, 2014, 06:22:30 PM |
|
Will bit-tech rigs be unlocked for overclocking? Will the cgminer source code driver/mods be released with your rigs?
If not I have zero interest.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 13, 2014, 06:32:36 PM |
|
I will have a full review up by wensday bug I can give you a few prelim findings. It is pulling 1028 watts and maintaining 1.1 th/s on the unit and 986 gh/s at the pool. It runs very well so far. He shipped it very safe and secure as well. Am I reading this right ? 1tH/s @ 1kW rigs available for $2500 USD, shipping next day ?!
correct we have 35 in stock left, and producing more as we speak. Alright, I'll bite. Email sent.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 13, 2014, 06:33:44 PM |
|
Minepeon will give you access to those setting. If you have a 4 or 5 blade rig overclocking should be easy. I have not done so yet as it runs so stable right now with next to no errors at this speed. Will bit-tech rigs be unlocked for overclocking? Will the cgminer source code driver/mods be released with your rigs?
If not I have zero interest.
|
|
|
|
PurpleDino
Newbie
Offline
Activity: 32
Merit: 0
|
|
April 13, 2014, 06:36:33 PM |
|
Got miner today but no screen with ip address. IP is 192.168.0.xx working ok so far
No screen for IP address, or as is not working? The pictures on the homepage seem to show a small screen, is this an from a different batch?
|
|
|
|
bradleyb5155
Newbie
Offline
Activity: 59
Merit: 0
|
|
April 13, 2014, 07:36:25 PM |
|
please let me know how to set up a payment I am interested in the product
|
|
|
|
tzortz
|
|
April 13, 2014, 09:37:23 PM |
|
Pm sent. Please check.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
jimrome
|
|
April 13, 2014, 09:50:01 PM |
|
Minepeon will give you access to those setting. If you have a 4 or 5 blade rig overclocking should be easy. I have not done so yet as it runs so stable right now with next to no errors at this speed. Will bit-tech rigs be unlocked for overclocking? Will the cgminer source code driver/mods be released with your rigs?
If not I have zero interest.
Um, no qiangminer claims they will not release cgminer source code despite in doing so being violation of the GPLV3 license agreement. So essentially they are shitting on the open source concept of cgminer. How much longer will unpaid devs (like lukejr, ckolivas, slush, kano etc) continue to develop and maintain software for the community for FREE when they know jerkoffs are just going to lock it down and sell it themselves? This has little to nothing to do with minepeon aside from the inability for customers to upgrade to new versions of cgminer. they also claim now that they cannot overclock, which is contrary to what was said only two days ago
|
|
|
|
tzortz
|
|
April 13, 2014, 09:53:36 PM |
|
Minepeon will give you access to those setting. If you have a 4 or 5 blade rig overclocking should be easy. I have not done so yet as it runs so stable right now with next to no errors at this speed. Will bit-tech rigs be unlocked for overclocking? Will the cgminer source code driver/mods be released with your rigs?
If not I have zero interest.
Um, no qiangminer claims they will not release cgminer source code despite it being in violation of the GPLV3 license agreement. This has little to nothing to do with minepeon aside from the inability for customers to upgrade to new versions of cgminer. they also claim now that they cannot overclock, which is contrary to what was said only two days ago Thank you for sharing that.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 13, 2014, 10:13:55 PM |
|
I knew about them not releasing the source code as required but I did not think they were going to get this bad with it. I still cannot get a factory image to restore and test with as mine arrived corrupt. I am on the generic image for now until I finish a minepeon build. I think that Bit-Tech will get us all sorted out though I know he is working hard. Minepeon will give you access to those setting. If you have a 4 or 5 blade rig overclocking should be easy. I have not done so yet as it runs so stable right now with next to no errors at this speed. Will bit-tech rigs be unlocked for overclocking? Will the cgminer source code driver/mods be released with your rigs?
If not I have zero interest.
Um, no qiangminer claims they will not release cgminer source code despite in doing so being violation of the GPLV3 license agreement. So essentially they are shitting on the open source concept of cgminer. How much longer will unpaid devs (like lukejr, ckolivas, slush, kano etc) continue to develop and maintain software for the community for FREE when they know jerkoffs are just going to lock it down and sell it themselves? This has little to nothing to do with minepeon aside from the inability for customers to upgrade to new versions of cgminer. they also claim now that they cannot overclock, which is contrary to what was said only two days ago
|
|
|
|
|