[POT]PotCoin - Banking for the Legal Cannabis Industry ✦ ✦ ✦Grow With Us ✦ ✦ ✦

[fixmod]

mining : )
POT PW2JCgU11F7VBq31LcHizYySj8AZkZPipD

[Maverick69]

WTS 12000 POT for 40 LTC

Paper and water pipe not included 



Increments, you send first.

[rznag]

Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?

I bet they`re orphaned. And it`s not a problem with your config.
Enter listtransactions in debug console, there you`ll see if they`re orphans.

[mycointr]

can't see sample config to solomine with wallet, is there any?

It`s the same as for every other coin.

yes but still need rpcport

You can set it to whatever you want.
As long as you set the same port in your miner config.

are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened

yes, i`m sure. Try it. Enter any valid rpcport for the coin-qt, set the same port in your miner config and you`re able to mine solo or access your clients through json-rpc.
If you want to run multiple clients just let them run on different ports.
for example....let potcoin run on 4242, bitcoin on 8332, litecoin on 8080...now set this ports in your json rpc connection and you can talk to all clients.
Using the same port on more than one client doesn`t make sense. First client started on this port will listen on that port. So if you start potcoin on 4242 and then litecoin on the same port you`ll always reach potcoin on 4242.
But i don`t know if litecoin isn`t reachable per rpc then or if it would set itself to defaultport.
These coins are just examples. It`s the same for all coins.

if i understand correctly, i learn something new...

so i don't need to change rpc for every coin...
just making a config file with a random rpc port number and renaming it will be enough for every coin?
(only will add nodes if wallet don't sync)

[a3tje]

From the Netherlands, so must support  haha

Anyway slowly mining don't have such good hardward so all donations welcome !
PP91r191JegtAHttDovg5Mh49fFg43eGDw

[arandy]

Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?

I bet they`re orphaned. And it`s not a problem with your config.
Enter listtransactions in debug console, there you`ll see if they`re orphans.

Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.

[rznag]

can't see sample config to solomine with wallet, is there any?

It`s the same as for every other coin.

yes but still need rpcport

You can set it to whatever you want.
As long as you set the same port in your miner config.

are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened

yes, i`m sure. Try it. Enter any valid rpcport for the coin-qt, set the same port in your miner config and you`re able to mine solo or access your clients through json-rpc.
If you want to run multiple clients just let them run on different ports.
for example....let potcoin run on 4242, bitcoin on 8332, litecoin on 8080...now set this ports in your json rpc connection and you can talk to all clients.
Using the same port on more than one client doesn`t make sense. First client started on this port will listen on that port. So if you start potcoin on 4242 and then litecoin on the same port you`ll always reach potcoin on 4242.
But i don`t know if litecoin isn`t reachable per rpc then or if it would set itself to defaultport.
These coins are just examples. It`s the same for all coins.

if i understand correctly, i learn something new...

so i don't need to change rpc for every coin...
just making a config file with a random rpc port number and renaming it will be enough for every coin?
(only will add nodes if wallet don't sync)

Yes, that`s how i do it and it works fine. Tested with around 25 different coins
They all have the same config except for the filename itself. And all run with the same cgminer config line.
But if you solomine you should have only one client running.

[rznag]

Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?

I bet they`re orphaned. And it`s not a problem with your config.
Enter listtransactions in debug console, there you`ll see if they`re orphans.

Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.

Remove those nodes. They will not work with this coin. Nodes are coin specific.
You don`t have to add nodes in config file unless your client doesn`t synch anymore.

[arandy]

Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?

I bet they`re orphaned. And it`s not a problem with your config.
Enter listtransactions in debug console, there you`ll see if they`re orphans.

Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.

Remove those nodes. They will not work with this coin. Nodes are coin specific.
You don`t have to add nodes in config file unless your client doesn`t synch anymore.

Tnx I removed them, keep learning everyday here 

[arandy]

Still rejecting 75% of the blocks I find. Seems a bit much to me

[sevoque]

Still rejecting 75% of the blocks I find. Seems a bit much to me

mine at a pool

[miau]

hi, nice new coin

Ive been trying to mine solo but cant figure it out.anyone cares to share a link on "how to solo mine POT"? thanks


pleae add some POT:
PLh2HD8ULLzMotDKowXFHhjtJaeWfLkRxh

[arandy]

Still rejecting 75% of the blocks I find. Seems a bit much to me

mine at a pool

The pools probably have the same problem. I mined pool for an hour to compare results but still finding more blocks confirmed solo.

[rznag]

Still rejecting 75% of the blocks I find. Seems a bit much to me

mine at a pool

The pools probably have the same problem. I mined pool for an hour to compare results but still finding more blocks confirmed solo.

How much hash (kh/s) do you have ?

[arandy]

Still rejecting 75% of the blocks I find. Seems a bit much to me

mine at a pool

The pools probably have the same problem. I mined pool for an hour to compare results but still finding more blocks confirmed solo.

How much hash (kh/s) do you have ?

Around 2550

[sevoque]

net hashrate increasing...

get on the POT bitches

[calligrapher]

just mining under radar. this thing can do something.

well done guys, this is a good concept.

[SCryptoMiners]

SCryptoMiners PotCoin Pool
http://pot.scryptominers.com

Features

• PPLNS (Pay Per Last N Shares) reward system
• Vardiff
• Reliable system with load balanced stratum / database servers.
• Payouts processed within 60 seconds of withdrawal request or when auto payout threshold has been reached.
• 1% pool fee

Minimum Payout: 1 PotCoin

Confirmations needed: 40

545+ blocks mined.

[calligrapher]

SCryptoMiners PotCoin Pool
http://pot.scryptominers.com

Features

• PPLNS (Pay Per Last N Shares) reward system
• Vardiff
• Reliable system with load balanced stratum / database servers.
• Payouts processed within 60 seconds of withdrawal request or when auto payout threshold has been reached.
• 1% pool fee

Minimum Payout: 1 PotCoin

Confirmations needed: 40

545+ blocks mined.

why we can't see pool's hashrate?

[SCryptoMiners]

SCryptoMiners PotCoin Pool
http://pot.scryptominers.com

Features

• PPLNS (Pay Per Last N Shares) reward system
• Vardiff
• Reliable system with load balanced stratum / database servers.
• Payouts processed within 60 seconds of withdrawal request or when auto payout threshold has been reached.
• 1% pool fee

Minimum Payout: 1 PotCoin

Confirmations needed: 40

545+ blocks mined.

why we can't see pool's hashrate?

Was just working on that, it's fixed now!