[ANN] coolMiner - Lyra2z Miner for nVidia [Maxwell\Pascal\Volta\RTX]

[principino1984]

Tried different intensity, even the default set, still after 4 hours the cards stop dripping, three of the four in Rig fall off, I had to go back to the previous miner 0.0.2-djm34. it is stable

that is exactly what happens to me. Keep working mate, you're doing a goot job but you need to fix this problems and you'll have a lot of people using it.

Marco

[1715168580]

1715168580

[1715168580]

1715168580

[Ryzen2700x]

Already working on it :-)
What you are describing is very similar to this so I have downloaded the  V2.0 as suggested and editing it, I think in 1~3 hours it will be ready and I will update the thread- sry for the trouble.

Hashrate gets down 55% after switching to Dev-pool #12

https://github.com/brian112358/nevermore-miner/issues/12

[principino1984]

Already working on it :-)
What you are describing is very similar to this so I have downloaded the  V2.0 as suggested and editing it, I think in 1~3 hours it will be ready and I will update the thread- sry for the trouble.

Hashrate gets down 55% after switching to Dev-pool #12

https://github.com/brian112358/nevermore-miner/issues/12

you're starting from nevermore miner then?

Ok...as soon as you'll update I will give it a try
Marco

[Earl_Vadim]

RX580 on Lyra2z = 3.5-3.6 MHs  
Vega - 6-7MHs  

 

[cirlama]

RX580 on Lyra2z = 3.5-3.6 MHs  
Vega - 6-7MHs  

 

which miner are you using for RX580, the one I tried were much lower than that...

[hogwash.89m]

In mixed nvidia rig 6 cards = 1 x 1080ti + 5 x 1080
1080ti
PL 90
CC +110
MEM -400

1080
PL 90
CC +120
MEM -400

Gains are almost 1 Mh/s after about hour of mining, but strange is that both miners will sometimes slow down and after some time speed up, it is in magnitued about ~2 Mh/s for ccminer
and ~1Mh/s for coolminer. I dont know what is culprit, rig is table other algos (Equihahs) don't have such large variations.

ccminer 2.2.5
~ 15.15 - 15.17 Mh/s
https://i.imgur.com/J4J0COo.png

coolMiner 1.1
~ 15.96 - 15.97 Mh/s
https://i.imgur.com/o7kNnxh.png

This is while mining GINcoin on eu.bsod.pw , with ping to stratum ~40ms.
Keep the good work!

[artsun]

tell me what speed is at 1066 does this coolMiner?

[nitrobg]

Are there any 1.1 binaries for linux?

[_Dr2]

wow,
Coolminer was added to MindMiner switcher 

Very fast reaction.

https://github.com/Quake4/MindMiner/releases

[Ryzen2700x]

I tried and now I see that some one manage to use it:
https://arcpool.com/site/miners
coolMiner/1.0 = Linux version
coolMiner/v.1.0 = Win

Should I have to include other files with the compiled ccminer so all can use it? or only the ccminer binary? because its work on my pc.

I have decided to use clean  latest ccminer 2.2.6 by tpruvot@github and modify it instead of brian112358@github fork, it was much more work and now it ready and I am testing it,also I have set the Max opt_retries to 5 and opt_fail_pause = 5 so it will not stuck if there is connection problem, you can also modify it in the bat file.

Hope this will fix the problems, I will update soon.

Edit:

wow,
Coolminer was added to MindMiner switcher 

Very fast reaction.

https://github.com/Quake4/MindMiner/releases

Wow , thank you all :-).

[_Dr2]

I have decided to use clean  latest ccminer 2.2.6 by tpruvot@github and modify it instead of brian112358@github fork,

OK, only from where you have the source of tpruvot ccminer 2.2.6?

[Ryzen2700x]

https://github.com/tpruvot/ccminer/tree/linux

[_Dr2]

https://github.com/tpruvot/ccminer/tree/linux

Ok, your choice.
I think ver 2.2.5 will be better.
2.2.6 is under dwveloptment and noone knows what issues it has.
Ver 2.2.5 IMO is stable.

[maxgam]

Been testing this miner for 24 hours.
Rig with 6x 1080 TI GPUs:
ccminer 2.2.5 - 20 Mh
This miner - 21 Mh
Also, after dev pool job -it just got stuck forever. And dev fee...
I think it does not worse it. hash gain does not cover dev fee.

[Multipulty2018]

Been testing this miner for 24 hours.
Rig with 6x 1080 TI GPUs:
ccminer 2.2.5 - 20 Mh
This miner - 21 Mh
Also, after dev pool job -it just got stuck forever. And dev fee...
I think it does not worse it. hash gain does not cover dev fee.

I stay on ccminer 2.2.5

[Ryzen2700x]

Important Update: Please Update to coolMiner-v1.2!
Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue.
Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead.
Download:
https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.zip
https://file.fm/f/meham7f6

[_Dr2]

Important Update: Please Update to coolMiner-v1.2!
Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue.
Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead.
Download:
https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.zip
https://file.fm/f/meham7f6

Ok, I'm testing

[Multipulty2018]

Important Update: Please Update to coolMiner-v1.2!
Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue.
Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead.
Download:
https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.zip
https://file.fm/f/meham7f6

not bad yet

[maxgam]

No difference, still very close to cc 2.2.5

[DonMaxim]

Important Update: Please Update to coolMiner-v1.2!
Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue.
Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead.
Download:
https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.zip
https://file.fm/f/meham7f6

Excellent job!!!
I got 3.71 mh with my 1080 ti...
I am switching back to this last coolminer-v1.2...
Thanks for good job...
Max

Edit:
I don’t know why but angrypool benchs not saving all my benchmarks, or someone is removing it...