Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 03, 2018, 11:13:38 AM Last edit: October 30, 2018, 06:45:20 PM by Ryzen2700x Merited by CjMapope (5), nsummy (1) |
|
Dear Miners :-),I would like to share with you my modified version of ccminer 2.2.6 with improved lyra2z kernels, I see that there is many new coins for this algo and since the hot summer is near there is no better "Eco" algo like lyra2z. So I called it the -"coolMiner" :-). This miner should have all ccminer options and you can use it on any pool or lyra2z coin u like - no limits!.Please use the latest nVidia drivers to get the full speed from the miner! Thanks for @zcoinofficial for recommending on coolMiner- You Are Cool! (+Thanks for the great Eco algo!)Update: coolMiner-v1.7!Release notes and download link:https://bitcointalk.org/index.php?topic=4412370.msg47366847#msg47366847.bat file for reference:coolMiner-x64 -a lyra2z -o stratum+tcp://<PoolURL>:<PORT> -u <WALLET_ADDRESS> -p <OPTIONS> -i 19 --hide-diff -q *supports "-p stats" to submit your results to yiimp pools :-) :coolMiner V1.7 Specs:- Compiled with Cuda10, 64-bit.
- Compiled for nVidia Gpu's with SM_52/SM_61/SM_70/SM_75 (Maxwell-Pascal-Volta-RTX).
- Max-GPU support increased to 20!.
- Stale share bug fixed.
- Lyra2z miner only.
Benchmark resaults:1080Ti - 3,750KH/s @2075Mhz core. 1070TI - 2,400KH/s @1987Mhz core (2,500 KH/s+ should be no problem with better OC). 1070 - 1,950KH/s @2025Mhz core (2,000 KH/s+ should be no problem with better OC). I only got those cards, I would like you to share your results on other cards too :-).Cool Tip to save power!:You can Limit the max Core voltage of the GPU with MSI afterburner by pressing: "ctrl+f" and then you will see new window with your cards Frequency/Voltage graph: Then you can click on the graph on the desired voltage and click "ctrl-l" and then the apply button on the MSI afterburner: Then you will see the Core voltage drops and this way you can drop the power usage: You can play with it and adjust the core clock and achieve the max clock/voltage for better efficiency- do it with small steps so you will not crash the display driver :-) I hope you will support and accept the 1% dev fee- let's call it "dude fee" , I prefer to support the community and not just sell it to "Big-Farms" ;-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, but full nodes are more resource-heavy, and they must do a lengthy initial syncing process. As a result, lightweight clients with somewhat less security are commonly used.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
madnessteat
Legendary
Offline
Activity: 2240
Merit: 2005
|
|
June 03, 2018, 12:00:57 PM |
|
Thanks for miner. My tests give 1070ti - 2250 KH/s 1070 - 1830 KH/s. I think I will achieve more, haven't experimented with overclocking.
|
| . .Duelbits. | │ | | │ | ▄▄█▄▄░░▄▄█▄▄░░▄▄█▄▄ ███░░░░███░░░░███ ▀░░░▀░░▀░░░▀░░▀░░░▀ ▄░░░░░░░░░░░░ ▀██████████ ░░░░░███░░░░▀ ░░█░░░███▄█░░░█ ░░██▌░░███░▀░░██▌ ░█░██░░███░░░█░██ ░█▀▀▀█▌░███░░█▀▀▀█▌ ▄█▄░░░██▄███▄█▄░░▄██▄ ▄███▄ ░░░░▀██▄▀ | . REGIONAL SPONSOR | | ███▀██▀███▀█▀▀▀▀██▀▀▀██ ██░▀░██░█░███░▀██░███▄█ █▄███▄██▄████▄████▄▄▄██ ██▀ ▀███▀▀░▀██▀▀▀██████ ███▄███░▄▀██████▀█▀█▀▀█ ████▀▀██▄▀█████▄█▀███▄█ ███▄▄▄████████▄█▄▀█████ ███▀▀▀████████████▄▀███ ███▄░▄█▀▀▀██████▀▀▀▄███ ███████▄██▄▌████▀▀█████ ▀██▄███▀██▄█▄▄▄██▄████▀ ▀▀██████████▄▄███▀▀ ▀▀▀▀█▀▀▀▀ | . EUROPEAN BETTING PARTNER | |
|
|
|
mySmile
Jr. Member
Offline
Activity: 462
Merit: 1
|
|
June 03, 2018, 12:36:20 PM |
|
This is a good result. Thanks.
|
|
|
|
MATPOC
Newbie
Offline
Activity: 155
Merit: 0
|
|
June 03, 2018, 03:40:41 PM |
|
Hi!
what about linux version?
if you need help - I can help you to compile it.
thank you.
|
|
|
|
|
Hyperder
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 03, 2018, 03:57:19 PM |
|
Interesting! ...
|
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
June 03, 2018, 04:34:01 PM |
|
testing this today, well let you know results 3.75 @ around 2100 eh? pretty high core for most there.... also: imo, use 16.04, you will have less compatibility issues
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
June 03, 2018, 04:49:59 PM |
|
You have source up on github?
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
sabercrypto
Member
Offline
Activity: 181
Merit: 10
|
|
June 03, 2018, 04:56:25 PM |
|
thanks for this. so far it is stable. so promising lyra2z miner
|
|
|
|
Pdoleycibey
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 03, 2018, 05:43:02 PM |
|
|
|
|
|
Pdoleycibey
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 03, 2018, 05:44:46 PM |
|
what are the algo it supports only lyra2z or others too
|
|
|
|
JeffJohnsonTheNameYouKnow
Jr. Member
Offline
Activity: 41
Merit: 2
|
|
June 03, 2018, 06:01:18 PM |
|
Are you at Power Level 0?
Would you mind posting what you have PL, Core, Mem set to?
Thanks
|
|
|
|
ivakar
|
|
June 03, 2018, 06:07:49 PM |
|
well, the speed is good, yes, but, unfortunately not the best..) there is a miner which can deliver greater performance. gtx1080ti with that miner delivers about 4080-4100 kh/s it is really not much faster then yours miner can do, but the lead is still the lead, right?
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 03, 2018, 06:11:03 PM |
|
Since this is ccminer.. Source? on Github? I have multiple Lyra2z coins available on http://www.Powermining.pw - feel free to join ;-)
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
June 03, 2018, 06:14:13 PM |
|
well, the speed is good, yes, but, unfortunately not the best..) there is a miner which can deliver greater performance. gtx1080ti with that miner delivers about 4080-4100 kh/s it is really not much faster then yours miner can do, but the lead is still the lead, right?
What is it? BSOD doesn't show any unknown miners.
|
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
June 03, 2018, 06:19:24 PM |
|
3650kh/s @ 2050 core & 140 watts on 1080ti no noticed suspicious activity from Wireshark/ESET i believe will be using this miner, tyty good sir worthy of it's 1% so far
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
somaton
Jr. Member
Offline
Activity: 204
Merit: 5
|
|
June 03, 2018, 06:22:34 PM |
|
Please compile CUDA 9.1 version.
|
|
|
|
cmexonat
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 03, 2018, 06:26:27 PM |
|
So far so good, after upgraded to latest nvidia driver for cuda 9.2 requirement. As for hashrate for my test cards: 1080ti - 3700kH/s (was 3300) PL 90% core +150 memory 0 1050ti - 800kH/s (was 700) PL 90% core +150 memory 0
|
|
|
|
|
farfui
Newbie
Offline
Activity: 26
Merit: 0
|
|
June 03, 2018, 08:37:15 PM |
|
do you ting to remove fee tax for using for solo mining or in this command --coinbase-addr=
|
|
|
|
pileto3
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 04, 2018, 05:38:01 AM |
|
Great! I will try it. What is the dev fee?
|
|
|
|
abanamat
Jr. Member
Offline
Activity: 274
Merit: 1
|
|
June 04, 2018, 06:13:23 AM |
|
Can't download from files.fm
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 06:15:41 AM |
|
Why? I just checked and I could download both versions.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 04, 2018, 07:42:20 AM |
|
Can't download from files.fm The same thing... can't dowload from files.fm Can you upload to other place?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 08:05:31 AM Last edit: June 05, 2018, 06:20:38 AM by Ryzen2700x |
|
I have uploaded to https://nofile.io -Can you try now? Download:
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
cryptovipin
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 04, 2018, 08:06:13 AM |
|
Thanks for miner. My tests give 1070ti - 2250 KH/s 1070 - 1830 KH/s. this is a fentestic project. i like it.
|
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 04, 2018, 08:11:56 AM |
|
Dowload it from nofile.io - everything good Thanx bro!) Now I will start testing miner
|
|
|
|
bigassboy
|
|
June 04, 2018, 08:40:56 AM |
|
I’m getting 1980-2020KH/s on my 1070, an increase of around 4%. Good job!
|
|
|
|
abanamat
Jr. Member
Offline
Activity: 274
Merit: 1
|
|
June 04, 2018, 08:45:01 AM |
|
Thank you, will try it soon! Any dev fee included?
|
|
|
|
pileto3
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 04, 2018, 08:56:31 AM |
|
Hi didn't see it from the phone, it is 1% Dev Fee... It is OK. Mine 1070TI gives me 2131-2476 kH/s. 1785-2088 Mhz. This is from miner console, from the pool side it is around 15 MH/s , Will see...
|
|
|
|
pileto3
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 04, 2018, 09:02:41 AM |
|
well, the speed is good, yes, but, unfortunately not the best..) there is a miner which can deliver greater performance. gtx1080ti with that miner delivers about 4080-4100 kh/s it is really not much faster then yours miner can do, but the lead is still the lead, right?
And the miner is?
|
|
|
|
abanamat
Jr. Member
Offline
Activity: 274
Merit: 1
|
|
June 04, 2018, 09:14:10 AM |
|
well, the speed is good, yes, but, unfortunately not the best..) there is a miner which can deliver greater performance. gtx1080ti with that miner delivers about 4080-4100 kh/s it is really not much faster then yours miner can do, but the lead is still the lead, right?
And the miner is? Looks like big intrigue
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 09:37:13 AM |
|
Could you explain how you caculated it? I have set it on 1% and after testing I saw it was switching to dev pool every 50~60 min for 30~40 seconds: [2018-06-03 03:34:24] accepted: 3036/3036 (100.00%, ping 117 ms), 35.80 MH/s Cool! [2018-06-03 03:34:41] GPU #0: 1797 MHz 28.48 kH/W 113W 55C FAN 46% [2018-06-03 03:34:42] accepted: 3037/3037 (100.00%, ping 97 ms), 35.80 MH/s Cool! [2018-06-03 03:34:52] lyra2z.eu.nicehash.com:3365 lyra2z block 63009 [2018-06-03 03:34:54] Stratum difficulty set to 2 [2018-06-03 03:34:55] accepted: 3038/3038 (100.00%, ping 108 ms), 35.80 MH/s Cool! [2018-06-03 03:34:56] accepted: 3039/3039 (100.00%, ping 117 ms), 35.80 MH/s Cool! [2018-06-03 03:34:57] accepted: 3040/3040 (100.00%, ping 89 ms), 35.80 MH/s Cool! [2018-06-03 03:34:57] accepted: 3041/3041 (100.00%, ping 120 ms), 35.80 MH/s Cool! [2018-06-03 03:34:58] accepted: 3042/3042 (100.00%, ping 97 ms), 35.80 MH/s Cool! [2018-06-03 03:34:59] accepted: 3043/3043 (100.00%, ping 107 ms), 35.80 MH/s Cool! [2018-06-03 03:34:59] accepted: 3044/3044 (100.00%, ping 100 ms), 35.80 MH/s Cool! [2018-06-03 03:35:00] accepted: 3045/3045 (100.00%, ping 106 ms), 35.80 MH/s Cool! [2018-06-03 03:35:00] dev pool lyra2z block 105089 [2018-06-03 03:35:05] accepted: 3046/3046 (100.00%, ping 105 ms), 35.80 MH/s Cool! [2018-06-03 03:35:06] accepted: 3047/3047 (100.00%, ping 127 ms), 35.80 MH/s Cool! [2018-06-03 03:35:07] accepted: 3048/3048 (100.00%, ping 113 ms), 35.80 MH/s Cool! [2018-06-03 03:35:08] accepted: 3049/3049 (100.00%, ping 108 ms), 35.80 MH/s Cool! [2018-06-03 03:35:08] accepted: 3050/3050 (100.00%, ping 102 ms), 35.80 MH/s Cool! [2018-06-03 03:35:09] accepted: 3051/3051 (100.00%, ping 106 ms), 35.80 MH/s Cool! [2018-06-03 03:35:09] accepted: 3052/3052 (100.00%, ping 100 ms), 35.80 MH/s Cool! [2018-06-03 03:35:09] accepted: 3053/3053 (100.00%, ping 103 ms), 35.80 MH/s Cool! [2018-06-03 03:35:10] accepted: 3054/3054 (100.00%, ping 105 ms), 35.80 MH/s Cool! [2018-06-03 03:35:11] accepted: 3055/3055 (100.00%, ping 110 ms), 35.80 MH/s Cool! [2018-06-03 03:35:12] accepted: 3056/3056 (100.00%, ping 97 ms), 35.80 MH/s Cool! [2018-06-03 03:35:12] accepted: 3057/3057 (100.00%, ping 96 ms), 35.80 MH/s Cool! [2018-06-03 03:35:13] accepted: 3058/3058 (100.00%, ping 117 ms), 35.80 MH/s Cool! [2018-06-03 03:35:14] accepted: 3059/3059 (100.00%, ping 104 ms), 35.80 MH/s Cool! [2018-06-03 03:35:16] accepted: 3060/3060 (100.00%, ping 111 ms), 35.80 MH/s Cool! [2018-06-03 03:35:16] accepted: 3061/3061 (100.00%, ping 103 ms), 35.80 MH/s Cool! [2018-06-03 03:35:16] accepted: 3062/3062 (100.00%, ping 101 ms), 35.80 MH/s Cool! [2018-06-03 03:35:17] accepted: 3063/3063 (100.00%, ping 103 ms), 35.80 MH/s Cool! [2018-06-03 03:35:18] accepted: 3064/3064 (100.00%, ping 125 ms), 35.80 MH/s Cool! [2018-06-03 03:35:20] accepted: 3065/3065 (100.00%, ping 111 ms), 35.80 MH/s Cool! [2018-06-03 03:35:22] accepted: 3066/3066 (100.00%, ping 102 ms), 35.80 MH/s Cool! [2018-06-03 03:35:24] lyra2z.eu.nicehash.com:3365 lyra2z block 63009 [2018-06-03 03:35:26] accepted: 3067/3067 (100.00%, ping 127 ms), 35.80 MH/s Cool! [2018-06-03 03:35:28] accepted: 3068/3068 (100.00%, ping 110 ms), 35.80 MH/s Cool! [2018-06-03 03:35:28] accepted: 3069/3069 (100.00%, ping 20 ms), 35.80 MH/s Cool! [2018-06-03 03:35:28] accepted: 3070/3070 (100.00%, ping 91 ms), 35.80 MH/s Cool! [2018-06-03 03:35:29] accepted: 3071/3071 (100.00%, ping 115 ms), 35.80 MH/s Cool!
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ARTRN
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 04, 2018, 09:50:37 AM |
|
Pros : This is highest performing miner for Lyra2z while maintaining L2Z characteristics ie. low power consumption etc. Gaining +/-3% more hash (depend on system;OC etc.)
Cons : Devfee 1% is a bit sketchy. Your hashrate on yiimp based pool would disappear every or so hour for few seconds to minutes. I'd bet 10 bucks fee is more than 1% as advertised by dev.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 10:07:42 AM |
|
Thanks :-),
Regarding "Your hashrate on yiimp based pool would disappear every or so hour for few seconds to minutes. " if it's more then few sec please check the stratum diff the miner is on, maybe it's working on high diff for few min or while working on high diff for few min the dev time comes and it's switches to dev pool and so you get the miner disappear for few min.
Hope it explains it :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
abanamat
Jr. Member
Offline
Activity: 274
Merit: 1
|
|
June 04, 2018, 10:08:35 AM |
|
Pros : This is highest performing miner for Lyra2z while maintaining L2Z characteristics ie. low power consumption etc. Gaining +/-3% more hash (depend on system;OC etc.)
Cons : Devfee 1% is a bit sketchy. Your hashrate on yiimp based pool would disappear every or so hour for few seconds to minutes. I'd bet 10 bucks fee is more than 1% as advertised by dev.
That's what I mean. More to say, switching to fee and back takes time too. Also speed is going down after few minutes. Pool says same +- hashrate with 2.2.5
|
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 04, 2018, 10:27:09 AM |
|
Thanks :-),
Regarding "Your hashrate on yiimp based pool would disappear every or so hour for few seconds to minutes. " if it's more then few sec please check the stratum diff the miner is on, maybe it's working on high diff for few min or while working on high diff for few min the dev time comes and it's switches to dev pool and so you get the miner disappear for few min.
Hope it explains it :-).
Hi. If every hour will switch and work for 2.5 minutes, it's 1 hour of work in the empty. Perhaps you need to reduce% for dev? "your hashrat on a yiimp-based pool will disappear every few seconds to a few minutes," - I think it's better to do this 10 minutes every 24 hours. Or there is no point in this miner.
|
|
|
|
teknohog
|
|
June 04, 2018, 10:32:35 AM |
|
Since this is ccminer.. Source? on Github?
Came to ask the same thing. If you're distributing a modified version of a GPL project, and not providing the source, you're committing license violation. Closed source is bad enough by itself for a lot of reasons. Especially in cryptocurrencies which are open community efforts. It's even worse if you're admitting you're leeching off community code. I'm assuming you don't feel like releasing the source because of the donation/fee percentage. Frankly, I don't have a good answer for that -- I've released some opensource code myself, and I sometimes feel I've been cheated by some Chinese knockoff projects that use my code without crediting me. But I guess imitation is the sincerest form of flattery Meaning that there are ways to make an honest living with opensource code. For starters, respect the licenses and maybe people will also respect your coding skills.
|
|
|
|
ARTRN
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 04, 2018, 10:33:35 AM |
|
Thanks :-),
Regarding "Your hashrate on yiimp based pool would disappear every or so hour for few seconds to minutes. " if it's more then few sec please check the stratum diff the miner is on, maybe it's working on high diff for few min or while working on high diff for few min the dev time comes and it's switches to dev pool and so you get the miner disappear for few min.
Hope it explains it :-).
I'm on fixed difficulty and it never happened on other 'free no devfee' miner. Thank you.
|
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 04, 2018, 11:02:27 AM |
|
I propose to remove the devfee from one hour to once a day or set a fixed price for the miner, BUT, the hash of 1080ti should be about 4000kh/s. How do you look at this?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
June 04, 2018, 12:23:29 PM |
|
not working on linux
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 01:56:37 PM Last edit: June 04, 2018, 02:19:27 PM by Ryzen2700x |
|
I have tried again with the instruction written in the Install file: ** How to compile on Ubuntu (16.04 LTS)
First, install Cuda toolkit and nVidia Driver, and type `nvidia-smi` to check if your card is detected.
Install dependencies ```sudo apt-get install libcurl4-openssl-dev libssl-dev libjansson-dev automake autotools-dev build-essential```
Ubuntu is now shipped with gcc 6 or 7 so please install gcc/g++ 5 and make it the default (required by the cuda toolkit) ``` sudo apt-get install gcc-5 g++-5 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 1 ```
Then use the helper ./build.sh in ccminer source folder, edit configure.sh and the Makefile.am if required. ``` ./build.sh ./ccminer --version ``` Download: https://nofile.io/f/VvDfyzrk8mk/coolMiner-x64L2.tar.gzHope it works now, P.S: why on Linux the miner looks working on "high priority" and it's effecting the system performance?(using browser while mining... etc'). P.S.2:OMG Look at that!! https://www.anandtech.com/show/12861/computex-2018-nvidia-live-blog-1pm-tw-5am-utc
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
somaton
Jr. Member
Offline
Activity: 204
Merit: 5
|
|
June 04, 2018, 02:44:25 PM |
|
What about CUDA 9.1 version? Any hope?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 02:57:40 PM Last edit: June 04, 2018, 03:17:59 PM by Ryzen2700x |
|
What about CUDA 9.1 version? Any hope?
Compiling now :-). Edit: testing now and it seems slower and I see no point adding it, sry.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 04, 2018, 05:39:22 PM |
|
1080ti ... 3550Kh/s @ 2025MHz on core
Nice step .. but we'd need more to keep competing with amd and lyra2z
Thanks for your job! Marco
|
|
|
|
MCat$
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 04, 2018, 06:05:40 PM |
|
So far so good, after upgraded to latest nvidia driver for cuda 9.2 requirement. As for hashrate for my test cards: 1080ti - 3700kH/s (was 3300) PL 90% core +150 memory 0 1050ti - 800kH/s (was 700) PL 90% core +150 memory 0
TDP 60 Core 54 Mem -502 GPU #$: Gigabyte GTX 1080 Ti, 3714.01 kH/s
|
|
|
|
MCat$
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 04, 2018, 06:14:37 PM |
|
Dear Miners :-),I would like to share with you my modified version of ccminer 2.2.5 with improved lyra2z kernels, I see that there is many new coins for this algo and since the hot summer is near there is no better "Eco" algo like lyra2z. So I called it the -"coolMiner" :-). This miner should have all ccminer options and you can use it on any pool or lyra2z coin u like - no limits!.coolMiner Specs:- Compiled with Cuda9.2, 64-bit.
- Compiled for nVidia Gpu's with SM_52/SM_61/SM_70 (Maxwell-Pascal-Volta).
- Max-GPU support increased to 20!.
- Stale share bug fixed.
- Lyra2z miner only.
Benchmark resaults:1080Ti - 3,750KH/s @2075Mhz core. 1070TI - 2,400KH/s @1987Mhz core (2,500 KH/s+ should be no problem with better OC). 1070 - 1,950KH/s @2025Mhz core (2,000 KH/s+ should be no problem with better OC). ScreenShots:1080Ti: https://s15.postimg.cc/qaucpnlcb/cool_MIner-1080_Ti.jpg1070 and 1070Ti: https://s15.postimg.cc/brn7o8521/cool_MIner-1070_1070_Ti.jpg I only got those cards, I would like you to share your resaults on other cards too :-).Cool Tip to save power!:You can Limit the max Core voltage of the GPU with MSI afterburner by pressing: "ctrl+f" and then you will see new window with your cards Frequency/Voltage graph: https://s15.postimg.cc/d6osd2vwb/MSIAB_ctrl-f.jpgThen you can click on the graph on the desired voltage and click "ctrl-l" and then the apply button on the MSI afterburner: https://s15.postimg.cc/s2nbkof0r/MSIAB_ctrl-_L.jpgThen you will see the Core voltage drops and this way you can drop the power usage: https://s15.postimg.cc/nymcrxizv/MSIAB_ctrl-_L-950m_V.jpgYou can play with it and adjust the core clock and achieve the max clock/voltage for better efficiency- do it with small steps so you will not crash the display driver :-) I hope you will support and accept the 1% dev fee, I prefer to support the community and not just sell it to "Big-Farms" ;-).Download: Windowds 64bit:https://file.fm/f/7tazmdx5https://nofile.io/f/Dt9PFUV97Px/coolMiner-x64.zipLinux:https://file.fm/f/t64hfppwhttps://nofile.io/f/dAkG1na87Cv/coolMiner-x64L.tar.gzThe Linux build made by installing fresh ubuntu :http://releases.ubuntu.com/16.04/Folowing this tutorial: https://www.youtube.com/watch?v=XdWr9pB5p_QAnd using those dependencies: https://github.com/KlausT/ccminer/wiki/How-to-create-binaries-under-Ubuntu-LinuxI have tested it on single 1080Ti and it worked, so please test it and confirm that it works for you too(I am new to Linux sry). Hi! Dev masternode-pow payment work in solo? Do you understand me ? "bad cb-payee"
|
|
|
|
Dalba
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 04, 2018, 07:19:25 PM |
|
Since this is ccminer.. Source? on Github?
Came to ask the same thing. If you're distributing a modified version of a GPL project, and not providing the source, you're committing license violation. Closed source is bad enough by itself for a lot of reasons. Especially in cryptocurrencies which are open community efforts. It's even worse if you're admitting you're leeching off community code. I'm assuming you don't feel like releasing the source because of the donation/fee percentage. Frankly, I don't have a good answer for that -- I've released some opensource code myself, and I sometimes feel I've been cheated by some Chinese knockoff projects that use my code without crediting me. But I guess imitation is the sincerest form of flattery Meaning that there are ways to make an honest living with opensource code. For starters, respect the licenses and maybe people will also respect your coding skills. Hello, I quote the message above as i also want to have a clear answer from dev. I don't care about having a dev fee, but I really care about transparency...
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
June 04, 2018, 07:27:19 PM |
|
Since this is ccminer.. Source? on Github?
Came to ask the same thing. If you're distributing a modified version of a GPL project, and not providing the source, you're committing license violation. Closed source is bad enough by itself for a lot of reasons. Especially in cryptocurrencies which are open community efforts. It's even worse if you're admitting you're leeching off community code. I'm assuming you don't feel like releasing the source because of the donation/fee percentage. Frankly, I don't have a good answer for that -- I've released some opensource code myself, and I sometimes feel I've been cheated by some Chinese knockoff projects that use my code without crediting me. But I guess imitation is the sincerest form of flattery Meaning that there are ways to make an honest living with opensource code. For starters, respect the licenses and maybe people will also respect your coding skills. Hello, I quote the message above as i also want to have a clear answer from dev. I don't care about having a dev fee, but I really care about transparency... Lol. Whenever you get the sources from SP_, then you'll get the sources from small time developers.
|
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 04, 2018, 07:58:51 PM |
|
correct...same problem for me.
|
|
|
|
crypt0ensio
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 04, 2018, 08:09:00 PM |
|
Yeah, here too.
Does it recover? Have anyone let it run in retry-mode?
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 04, 2018, 08:49:48 PM |
|
Yeah, here too.
Does it recover? Have anyone let it run in retry-mode?
In 1 location I have the same problem but in 2 location all was working good. because I think it is problem with resolving devfee pool by DNS.
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 04, 2018, 08:51:33 PM |
|
Yeah, here too.
Does it recover? Have anyone let it run in retry-mode?
In 1 location I have the same problem but in 2 location all was working good. same country for all the location? I think is a url problem from our countries. I'm from italy and all my miner has the same problem
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 04, 2018, 08:55:34 PM |
|
I'm in the USA and have that problem
|
|
|
|
qlol
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 04, 2018, 08:56:54 PM |
|
Yes, same issue for me! 3 rigs, two different ISP, in Italy
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 08:58:12 PM |
|
I have tried to mine when you have posted it and also got error for few sec and then when tried again all good, maybe it was NH problem for few min(it mines on NH EU server)? Please tell me if this continues, also it should get back to your pool after the dev time over- right?. I am also running the miner to check the log later to see if got same error. Also why the ping is so High? can you give some info? sry for the trouble.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 04, 2018, 09:00:05 PM |
|
Yeah, here too.
Does it recover? Have anyone let it run in retry-mode?
In 1 location I have the same problem but in 2 location all was working good. same country for all the location? I think is a url problem from our countries. I'm from italy and all my miner has the same problem Yes, the same country but different ISP
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 04, 2018, 09:01:39 PM |
|
same problem for me.. ping is high and it doesn't recover to the pool. It just stays in the error.
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 04, 2018, 09:08:07 PM |
|
Also why the ping is so High? can you give some info?
sry for the trouble.
Give us pool url. All my rigs are mining on Angrypool now. EDIT Past 4 min coolminer can not reconnect to my pool
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 04, 2018, 09:23:21 PM |
|
tried again but no luck... after a few minutes when it tries to get on NH drops the connection and cannot switch back to my pool
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 09:27:20 PM Last edit: June 04, 2018, 09:37:46 PM by Ryzen2700x |
|
Update: it looks nicehash problem, my rig also give same error on stratum+tcp://lyra2z.eu.nicehash.com:3365. OMG, I have no Luck mining lyra2z :-(. for now I don't have a solution, I suggest you change back to ccminer until NH will fix their EU stratum , plus I will try to see if the Fee mechanism can be improved so it will force to switch back to main pool even if the dev pool not connecting.
Sry :-(.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
crypt0ensio
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 04, 2018, 09:28:26 PM |
|
Please tell me if this continues, also it should get back to your pool after the dev time over- right?.
I had it run on dev-time, (retrying) it ran for like 30mins, but didn't switch back. all my rigs with the same issue.
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 04, 2018, 09:40:29 PM |
|
Update: it looks nicehash problem, my rig also give same error on stratum+tcp://lyra2z.eu.nicehash.com:3365. OMG, I have no Luck mining lyra2z :-(.
please fix this error so i don't have to keep manually restart my rigs every 15-30 min try a different location Also if it helps i'm mining CRS and it does NOT switch back to the original Pool stratum+tcp://lyra2z.LOCATION.nicehash.com:3365 LOCATION: eu, usa, hk, jp, in, br
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 04, 2018, 09:51:09 PM |
|
Update: it looks nicehash problem, my rig also give same error on stratum+tcp://lyra2z.eu.nicehash.com:3365. OMG, I have no Luck mining lyra2z :-(.
please fix this error so i don't have to keep manually restart my rigs every 15-30 min try a different location Also if it helps i'm mining CRS and it does NOT switch back to the original Pool stratum+tcp://lyra2z.LOCATION.nicehash.com:3365 LOCATION: eu, usa, hk, jp, in, br two solutions Solution Dev, OPEN SOURCE THE CODE! or don't use nicehash pool
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 04, 2018, 09:54:05 PM |
|
Update: it looks nicehash problem, my rig also give same error on stratum+tcp://lyra2z.eu.nicehash.com:3365. OMG, I have no Luck mining lyra2z :-(. for now I don't have a solution, I suggest you change back to ccminer until NH will fix their EU stratum , plus I will try to see if the Fee mechanism can be improved so it will force to switch back to main pool even if the dev pool not connecting.
Sry :-(.
Hmm... maybe but whay it works in one location and on second not? Maybe You will to change fee strategy and/or devfee pool? Yours miner is good and would be a pity not to use it because of some NH errors only.
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 04, 2018, 09:57:52 PM |
|
Update: it looks nicehash problem, my rig also give same error on stratum+tcp://lyra2z.eu.nicehash.com:3365. OMG, I have no Luck mining lyra2z :-(. for now I don't have a solution, I suggest you change back to ccminer until NH will fix their EU stratum , plus I will try to see if the Fee mechanism can be improved so it will force to switch back to main pool even if the dev pool not connecting.
Sry :-(.
we happen to have a lot of people on our discord for pickaxe.pro mining pool that my be able to help you here is the link https://discord.gg/trkvyQ9
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 04, 2018, 09:58:07 PM |
|
I got error even when trying to mine directly, only on EU, maybe it same Intel security patching on EU servers?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Johnjay06
Newbie
Offline
Activity: 93
Merit: 0
|
|
June 04, 2018, 10:04:31 PM |
|
Is this open or closed source?
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 04, 2018, 10:07:01 PM |
|
I got error even when trying to mine directly, only on EU, maybe it same Intel security patching on EU servers?
As I was writen above, in one location (EU) coolminer works perfect on 14 of my rigs (14x8GPU) then I think it is not thats problem.
|
|
|
|
buykeyvn
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 04, 2018, 10:24:37 PM |
|
Hi, How to config .bat file?
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 04, 2018, 10:35:24 PM |
|
I got error even when trying to mine directly, only on EU, maybe it same Intel security patching on EU servers?
I tried mining directly on Nicehash with your miner and it works great till it tries and switches to your dev fee i believe you have it configured wrong somewhere in your script do you have a BTC address correctly inputted?
|
|
|
|
EdgeOfSanity
Jr. Member
Offline
Activity: 33
Merit: 2
|
|
June 04, 2018, 11:07:48 PM |
|
miner is bugged, its not a nicehash problem. Had issues with it on all my rigs and i'm not using nicehash. Dev will need to fix it if he wants that fee income.
also, don't use nicehash you dumbasses. Find coins to mine directly and make a lot more money. Nicehash is cancer.
|
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 04, 2018, 11:29:46 PM |
|
I found that in same building 2 different internet providers, 1 working perfect and other have connection problem, so it’s nicehash isp or dns problem, not the miners problem... You can open same .bat file with any other miner like ccminer and it would be same problem, Last 4 hours the eu stratum not working with all internet providers, test it like I wrote and you will get same result....
Other than eu stratums works for both location but it seems that devs fee goes to eu stratum.... For now for 1 my location i have started to mine with coolminer on nicehash, it’s working perfect... Max
|
|
|
|
EdgeOfSanity
Jr. Member
Offline
Activity: 33
Merit: 2
|
|
June 04, 2018, 11:54:57 PM |
|
0 issues with ccminer 2.2.5 on the same lyra2z coin on the same pool server. Its the miner, not a dns issue.
|
|
|
|
CryptoCoinMinerPaul
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 05, 2018, 12:01:28 AM |
|
I found that in same building 2 different internet providers, 1 working perfect and other have connection problem, so it’s nicehash isp or dns problem, not the miners problem... You can open same .bat file with any other miner like ccminer and it would be same problem, Last 4 hours the eu stratum not working with all internet providers, test it like I wrote and you will get same result....
Other than eu stratums works for both location but it seems that devs fee goes to eu stratum.... For now for 1 my location i have started to mine with coolminer on nicehash, it’s working perfect... Max
It is a miner program problem it runs fine till it tries and switches to collect the DEV fee even the DEV said he has the same problem with it on Nicehash!!! Nicehash sucks anyway to much in fees and way to high for payouts take me a month to mine on nicehash to get paid and thats with 18 gpus I also believe you didn't run the program long enough to get to where it switches to the dev fee try running it for 1 hr
|
|
|
|
buykeyvn
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 05, 2018, 12:43:18 AM |
|
Hello Dev, How to config it? It's only coolMiner-x64.exe file. Please help me!
|
|
|
|
dkbit98
Legendary
Offline
Activity: 2226
Merit: 7147
|
|
June 05, 2018, 12:44:58 AM |
|
This is interesting... I like Lyra2z algo and always looking for better miner software- but you should leave people options to reduce or remove fee.
Also I don't see any reaction about issues that people have.
|
. .HUGE. | | | | | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . CASINO & SPORTSBOOK ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | |
|
|
|
nsummy
|
|
June 05, 2018, 01:51:58 AM |
|
This is interesting... I like Lyra2z algo and always looking for better miner software- but you should leave people options to reduce or remove fee.
Also I don't see any reaction about issues that people have.
He posted 5 hours ago that the issue with with the EU Nicehash server and until they fix it or he can improve the mechanism, that he recommends using CCminer. As for the fee, why give the option? If this lowers heat output I think that is well worth 1%. And as a matter of fact, I think 1% for any mining software is fair.
|
|
|
|
spatialiste
Full Member
Offline
Activity: 1540
Merit: 121
Callisto Network - Security Audits & Cold Staking
|
|
June 05, 2018, 02:07:30 AM |
|
Great project! I would just like to know if with my config I would have a benefit to use this miner, I have gtx 1060 6go, and I read you use 1070s and 1080s.
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 05, 2018, 05:05:49 AM |
|
greed dev
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 05:27:43 AM Last edit: June 05, 2018, 06:03:06 AM by Ryzen2700x |
|
I am just an human, I had to get some sleep :-), I am not a Dev, not every one that plays with the code should be called "Dev", we all know the real Dev's , I am just simple dude (Avengers:Infinity War?). I am more like an Overclocker who improved the performance of the Hardware, and not a Developer because I did not developed the Hardware, I see many new closed source miners are comming out that some of them not crediting the source ccminer Devs, and you can tell in a sec on which ccminer they are built on, So let's call "Dev's" only to the real Dev's behind the great ccminer forks that we are using :-). Sry all , I had bad week with all the MPH Zcoin drama, and now after switching to Nicehash lyra2z the bad luck is following me and I have problems using the EU stratum . I am happy to hear your suggestions - what lyra2z coin and Pool should I point the the miner to when switching to the Fee time? I don't have experience with angrypool/bsod/arcpool/gos pools, which one should be more stable/reliable ? And like I sad - if you have problems with the miner- please switch to ccminer until I compile new version without nicehash Since this is ccminer.. Source? on Github?
... ... Hello, I quote the message above as i also want to have a clear answer from dev. I don't care about having a dev fee, but I really care about transparency... Lol. Whenever you get the sources from SP_, then you'll get the sources from small time developers. ROFL, you made me spill my drink LOL, this is a masterpiece for signature for "Mining (Altcoins)" subforum .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
preda
|
|
June 05, 2018, 06:17:00 AM |
|
We can't mine in Europe... Coolminer lose connection
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 05, 2018, 06:34:54 AM |
|
I am happy to hear your suggestions - what lyra2z coin and Pool should I point the the miner to when switching to the Fee time? I don't have experience with angrypool/bsod/arcpool/gos pools, which one should be more stable/reliable ?
Maybe GINcoin on angrypool.com? They have large hashrate in this network and are prety stable. (for me)
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 06:49:11 AM |
|
OK, working on it.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
majonezas
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 05, 2018, 07:57:28 AM |
|
We can't mine in Europe... Coolminer lose connection
same here, loosing connection with f2pool in like 10 minutes, but same thing happens with ccminer , probably a pool issue
|
|
|
|
W.T.R.
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 05, 2018, 07:58:34 AM |
|
Still no workaround?
|
|
|
|
Ragnarokt
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 05, 2018, 09:04:45 AM |
|
I have tried again with the instruction written in the Install file: ** How to compile on Ubuntu (16.04 LTS)
First, install Cuda toolkit and nVidia Driver, and type `nvidia-smi` to check if your card is detected.
Install dependencies ```sudo apt-get install libcurl4-openssl-dev libssl-dev libjansson-dev automake autotools-dev build-essential```
Ubuntu is now shipped with gcc 6 or 7 so please install gcc/g++ 5 and make it the default (required by the cuda toolkit) ``` sudo apt-get install gcc-5 g++-5 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 1 ```
Then use the helper ./build.sh in ccminer source folder, edit configure.sh and the Makefile.am if required. ``` ./build.sh ./ccminer --version ``` Download: https://nofile.io/f/VvDfyzrk8mk/coolMiner-x64L2.tar.gzHope it works now, P.S: why on Linux the miner looks working on "high priority" and it's effecting the system performance?(using browser while mining... etc'). P.S.2:OMG Look at that!! https://images.anandtech.com/doci/12861/15280895087641574692760_575px.jpghttps://www.anandtech.com/show/12861/computex-2018-nvidia-live-blog-1pm-tw-5am-utcThis file https://nofile.io/f/VvDfyzrk8mk/coolMiner-x64L2.tar.gz needs to be compiled or just replace ccminer file in Ubuntu? I used HiveOS mining system based on Ubuntu 16.04 If I replace the file miner dislayed - "ccminer exited, cooldown a bit"
|
|
|
|
ekze
Jr. Member
Offline
Activity: 210
Merit: 6
|
|
June 05, 2018, 09:30:32 AM |
|
I am just an human, I had to get some sleep :-),
I am not a Dev, not every one that plays with the code should be called "Dev", we all know the real Dev's , I am just simple dude (Avengers:Infinity War?).
Maybe open your code then?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 10:04:26 AM Last edit: June 05, 2018, 10:18:16 AM by Ryzen2700x |
|
Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds". The new v1.1 version will mine on Angrypool when switching to Dev Pool Dudes pool on the Fee time. Also the CYCLE_TIME between pool changes increase like you asked. Please let me know if there is any more problems. Download:New Version V1.1: https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zipAbout Linux:I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks! P.S- now the NH EU stratum seems fixed on my side and I can connect .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 05, 2018, 10:28:21 AM |
|
Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds". The new v1.1 version will mine on Angrypool when switching to Dev Pool Dudes pool on the Fee time. Also the CYCLE_TIME between pool changes increase like you asked. Please let me know if there is any more problems. Download:New Version V1.1: https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zipAbout Linux:I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks! P.S- now the NH EU stratum seems fixed on my side and I can connect . Coolminer ver1 works now greate for both my 2 locations, no more connection problems, Like i wrote before it was nicehash eu connection problem and seems they fixed it.... Max
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 05, 2018, 10:36:17 AM |
|
Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds". The new v1.1 version will mine on Angrypool when switching to Dev Pool Dudes pool on the Fee time. Also the CYCLE_TIME between pool changes increase like you asked. Please let me know if there is any more problems. Download:New Version V1.1: https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zipAbout Linux:I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks! P.S- now the NH EU stratum seems fixed on my side and I can connect . trying right now two rigs with v1.1 ... I'll let you know in an hour
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 05, 2018, 10:52:28 AM |
|
the miner works correctly with one card. If there are more cards then problems arise
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
abanamat
Jr. Member
Offline
Activity: 274
Merit: 1
|
|
June 05, 2018, 10:55:29 AM |
|
Really funny - people still use that shit calling Nicehash
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 05, 2018, 11:20:03 AM |
|
40 min no problem.... 1080ti @2025 ... 3650 kh/s
Marco
|
|
|
|
Ragnarokt
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 05, 2018, 11:22:47 AM |
|
I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
I'm not an advanced Linux user . Unfortunately couldn't help. Write to HiveOS dev team https://forum.hiveos.farm/discussion/55/ccminer-forks, they could help. This miner for HiveOS will have perspective
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 11:27:18 AM |
|
What should I do to make "-p stats" working on the pools bench? if I change the name to "ccminer/coolMiner-v.1.1" it will be supported? Just for fun so we can compete for top of the leader-board :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 05, 2018, 11:42:53 AM |
|
What should I do to make "-p stats" working on the pools bench? if I change the name to "ccminer/coolMiner-v.1.1" it will be supported? Just for fun so we can compete for top of the leader-board :-).
You should ask mods/admin of pool on discord
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 11:46:36 AM |
|
Made it work :-), Compiling again now and will update the download link :-). I love to bench LOL.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
LexBul
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 05, 2018, 11:50:27 AM |
|
Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds". The new v1.1 version will mine on Angrypool when switching to Dev Pool Dudes pool on the Fee time. Also the CYCLE_TIME between pool changes increase like you asked. Please let me know if there is any more problems. Download:New Version V1.1: https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zipAbout Linux:I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks! P.S- now the NH EU stratum seems fixed on my side and I can connect . http://prntscr.com/jr3jkt
|
|
|
|
teknohog
|
|
June 05, 2018, 11:51:07 AM |
|
About Linux: I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
Give us the source (like you're supposed to do anyway) and some of us will compile it for you. That's one of the benefits of open source.
|
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 05, 2018, 11:57:42 AM |
|
Also the CYCLE_TIME between pool changes increase like you asked.
Please write what exactly has changed?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 12:23:17 PM |
|
RIF86 - I have increased the CYCLE_TIME by 20%, so now instead switching pool every 40~50 min its should be hr~. Update: Download:New Version V1.1 - Now supports "-p stats" to submit your results to yiimp pools :-) : https://nofile.io/f/wFpqPs0MB9v/coolMiner-x64-v1-1.zip
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
|
crypt0ensio
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 05, 2018, 02:16:15 PM |
|
Mr. Ryzen, please answer:
Did you do something else than recompile the ccminer with cuda 9.2?
I mean, any optimizations, not changing placeholders like yes! to Cool! or dev pool to yours?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 02:29:31 PM |
|
It's easy to test, you can compile the ccminer with Cuda 9.2 and check yourself :-). Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS . P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18. https://angrypool.com/bench
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ShufStiX
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 05, 2018, 02:36:34 PM |
|
It's easy to test, you can compile the ccminer with Cuda 9.2 and check yourself :-). Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS . P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18. https://angrypool.com/benchRunning myself with intensity 20, getting 2000kh/s with 1070 and 2665kh/s pro 1080
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 05, 2018, 05:28:19 PM |
|
1080ti running smooth with intensity 21 ... with this miner I had to low a little the gpu freq of my 80ti's
Marco
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 05:38:11 PM |
|
Thanks,
I was wondering about the Intensity and I thought to ask you all, What do you think is better: Highest intensity stable or the lowest intensity that does not decrease the hash-rate?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 05, 2018, 05:39:10 PM |
|
I was wondering about the Intensity and I thought to ask you all, What do you think is better: Highest intensity stable or the lowest intensity that does not decrease the hash-rate?
I think that the best is highest intensity.
|
|
|
|
dkbit98
Legendary
Offline
Activity: 2226
Merit: 7147
|
|
June 05, 2018, 08:30:02 PM |
|
I tried with my edited BAT file, but it is not working, and mining window is closing.
Anyone have the .bat template or instructions ?
|
. .HUGE. | | | | | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . CASINO & SPORTSBOOK ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | |
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 08:44:29 PM |
|
coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com:<PORT> -u <WALLET_ADDRESS> -p <OPTIONS> -i 19 --hide-diff
Set the Intensity (-i 19) accordingly to what u like.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 05, 2018, 08:46:53 PM |
|
Why on two identical rigs, after a while,on one Riga falls the hash from 13 to 3 on the pool, although in the miner shows 13. and temperature the map is smaller,decreases the power consumption on this Riga. coolMiner 1.1
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 05, 2018, 08:48:58 PM |
|
I tried with my edited BAT file, but it is not working, and mining window is closing.
Anyone have the .bat template or instructions ?
You may type: coolminer-x64.exe -h in DOS window.
|
|
|
|
Sikkan666
Member
Offline
Activity: 239
Merit: 11
|
|
June 05, 2018, 08:55:14 PM |
|
excelent miner! fastest out there today! tomorrow when the speeds have settled I will post some speeds
|
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 05, 2018, 09:22:55 PM |
|
Why in the miner is written the speed of video cards 13 m / h, but at some point the load on the cards becomes less,they become 5 degrees colder and their power consumption drops. Although the miner still shows the speed of 13, but on the pool the speed drops to 3 m/h. The reason? miner coolMiner v 1.1,before it stood a normal miner and a speed of 11 m/h was constant in the miner and on the pool
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 09:26:43 PM |
|
I think there is some stability issue, can you share your clock speeds and intensity used?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 05, 2018, 09:30:43 PM |
|
1080ti evgs PL 85, core 100, memory 0, 1847 Mhz -i 21
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 05, 2018, 09:34:56 PM |
|
Lets start by lowering the intensity to 19.75, I have the best experience with that.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 05, 2018, 09:39:17 PM |
|
okay, I'll try
|
|
|
|
boomboommin
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 05, 2018, 10:00:24 PM |
|
gtx 1080 on ccminer 2.2.4-2.2.5 from github does 2550Kh+-50Kh
this miner 2700 Kh+-50Kh
150Kh x 25 cards = 3750 Kh =~2 1070 cards. It`s good.
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 05, 2018, 10:41:32 PM |
|
gtx1080, depending on the manufacturer, coolminer shows 2600-2650kh/s. (-i 21) I think, it is good even after subtracting fee.
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 05:42:45 AM |
|
I had to stop using it, after a few hours the miner crash or just stop working. My rigs are stable because they are working since january 24/7 no stop and I've used a lot of algos.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 05:54:23 AM |
|
Sry to hear that, have you considered lowering the intensity? 21 is high and gives no real speed gain even over 19, and only can increase the latency from the point if find nonce until it need to completes hashing (-i 21 =2097152) , this is why I asked about it, I think that the lowest intensity possible without impacting the hash-rate should be the best option, correct me if I am wrong.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 05:59:25 AM |
|
Sry to hear that, have you considered lowering the intensity? 21 is high and gives no real speed gain even over 19, and only can increase the latency from the point if find nonce until it need to completes hashing (-i 21 =2097152) , this is why I asked about it, I think that the lowest intensity possible without impacting the hash-rate should be the best option, correct me if I am wrong.
I'll give it a try for today at -i 19 Marco
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 06:14:17 AM Last edit: June 06, 2018, 06:28:16 AM by Ryzen2700x |
|
Thanks, I will also keep monitoring to find out if it crashes and what could cause it, also I even tried -i 18 on 1080Ti and got same hash-rate like on -i 21, so there is no real advantage using such high intensity on this miner. This is because the changes that I made regarding lyra2Z_cpu_hash_32 and blake256_cpu_hash_80 launches, on ccminer you loose about 1.5%-2% on 21 vs 18 intensity, on coolMiner the hash-rate stays the ~same.
Edit:I have tested it: -i 16 vs -i 21: ccminer ~8% penalty vs coolMiner ~3% penalty . -i 17 vs -i 21: ccminer ~4% penalty vs coolMiner ~1.5% penalty . You can test it yourself.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 06, 2018, 07:39:32 AM |
|
How many minutes does the devfee function each hour?
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 06, 2018, 08:22:49 AM |
|
for me it is about 1 minute for one hour
|
|
|
|
Sikkan666
Member
Offline
Activity: 239
Merit: 11
|
|
June 06, 2018, 09:20:24 AM |
|
so, my 1060 3 gb at 65% tdp and 145 mhz core overclock they are doing around 1185 khs! very good 1080 @ 70% tdp is running at 2730 per sec 1070ti @ 65% tdp is running at 2430 per sec! impressive numbers
|
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 06, 2018, 09:35:33 AM |
|
The rate of hashes is one thing. Devfee - completely different. We need a balance between this. If the profit from the miner is from 5%, then it makes sense to use it.
|
|
|
|
ruplikminer
Jr. Member
Offline
Activity: 504
Merit: 3
|
|
June 06, 2018, 09:42:09 AM |
|
Speed with this miner is very good!
But I wonder if you can reach the speed of teh Z FAST MINER? I get 2900 with ZFASTMINER and my 1070ti.
Just ZFAST MINER sucks cause you can ONLY mine on miningpoolhub with that miner...
|
|
|
|
qlol
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 06, 2018, 11:42:04 AM |
|
Connection issues again, need restart miner again
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 12:00:26 PM |
|
I had to go back to zfastminer, even with intensity at 19 after a few hours it disconnects/crash. Don't really know why.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
June 06, 2018, 12:36:48 PM |
|
out of curiosity... anyone tried to compile the open source ccminer with cuda 9.2 and see the difference with this miner ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 06, 2018, 12:37:09 PM Last edit: June 06, 2018, 12:50:09 PM by _Dr2 |
|
I had to go back to zfastminer, even with intensity at 19 after a few hours it disconnects/crash. Don't really know why.
If You are used coolminer on MPH then ZFastminer is a lot of better but in other pools coolminer works for me fine. Maybe You have some issue with which you have not met up til to use coolminer. What's Your config of GPU, swap memory etc.? With me, the coolminer works on 96 GTX1080 and have no problem. All this works on ~2050MHz core and ~5005 MHz memory. EDIT out of curiosity... anyone tried to compile the open source ccminer with cuda 9.2 and see the difference with this miner ? Some day ago I was asking @Sp_ about it and @Sp_ wrote that was trayng and practicly it has no difference in hashrate But this is Sp_ and sometimes he only writes what he wants.
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 12:40:01 PM |
|
I had to go back to zfastminer, even with intensity at 19 after a few hours it disconnects/crash. Don't really know why.
If You are used coolminer on MPH then ZFastminer is a lot of better but in other pools coolminer works for me fine. Maybe You have some issue with which you have not met up til to use coolminer. What's Your config of GPU, swap memory etc.? With me, the coolminer works on 96 GTX1080 and have no problem. All this works on ~2050MHz core and ~5005 MHz memory. Well, till now I've used a lot of miner with the same configuration with no problem at all. This is the first and only miner that crashes. I don't think is a problem of my rigs since they are with the same configuration since january and they are working great 24/7 with any other miner. Even equihash that is mor power consuming works great. Actually I'm working with 2025Mhz gpu and -500mhz on ddr, temperatures are below 55°C Marco
|
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 06, 2018, 12:57:01 PM |
|
After 3-4 min on nicehash pool it loses connection and cannot reconnect.
|
|
|
|
valentoz
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 06, 2018, 01:55:11 PM |
|
Oтличный мaйнep!!! Пpиpocт peaльнo зaмeтeн!!! Удaчи тeбe дopoгoй дpyг, ты дeлaeшь xopoшyю пpoгy!!!
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 02:05:18 PM |
|
Thanks :-). Connection issues again, need restart miner again
After 3-4 min on nicehash pool it loses connection and cannot reconnect.
Are you on ccminer/coolMiner-v1.1? Are you mining on NiceHash? if so the connection problems are back on my rig too, and this on version without fee, so it should not be fee time problem. Also what is "XnSub" for? can it cause problems or solve problems? I had to go back to zfastminer, even with intensity at 19 after a few hours it disconnects/crash. Don't really know why.
If You are used coolminer on MPH then ZFastminer is a lot of better but in other pools coolminer works for me fine. Maybe You have some issue with which you have not met up til to use coolminer. What's Your config of GPU, swap memory etc.? With me, the coolminer works on 96 GTX1080 and have no problem. All this works on ~2050MHz core and ~5005 MHz memory. Well, till now I've used a lot of miner with the same configuration with no problem at all. This is the first and only miner that crashes. I don't think is a problem of my rigs since they are with the same configuration since january and they are working great 24/7 with any other miner. Even equihash that is mor power consuming works great. Actually I'm working with 2025Mhz gpu and -500mhz on ddr, temperatures are below 55°C Marco Edit: I see others have problems like you have described(I use his fork).https://github.com/brian112358/nevermore-miner/issues/12I will try to check his code and try the use older verssion
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 06, 2018, 02:55:28 PM |
|
Tried different intensity, even the default set, still after 4 hours the cards stop dripping, three of the four in Rig fall off, I had to go back to the previous miner 0.0.2-djm34. it is stable
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 03:28:08 PM |
|
Tried different intensity, even the default set, still after 4 hours the cards stop dripping, three of the four in Rig fall off, I had to go back to the previous miner 0.0.2-djm34. it is stable
that is exactly what happens to me. Keep working mate, you're doing a goot job but you need to fix this problems and you'll have a lot of people using it. Marco
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 03:32:53 PM |
|
Already working on it :-) What you are describing is very similar to this so I have downloaded the V2.0 as suggested and editing it, I think in 1~3 hours it will be ready and I will update the thread- sry for the trouble. Hashrate gets down 55% after switching to Dev-pool #12 https://github.com/brian112358/nevermore-miner/issues/12
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 06, 2018, 03:39:41 PM |
|
Already working on it :-) What you are describing is very similar to this so I have downloaded the V2.0 as suggested and editing it, I think in 1~3 hours it will be ready and I will update the thread- sry for the trouble. Hashrate gets down 55% after switching to Dev-pool #12 https://github.com/brian112358/nevermore-miner/issues/12you're starting from nevermore miner then? Ok...as soon as you'll update I will give it a try Marco
|
|
|
|
Earl_Vadim
Jr. Member
Offline
Activity: 125
Merit: 2
|
|
June 06, 2018, 04:33:29 PM |
|
RX580 on Lyra2z = 3.5-3.6 MHs Vega - 6-7MHs
|
|
|
|
cirlama
Jr. Member
Offline
Activity: 156
Merit: 1
|
|
June 06, 2018, 06:07:03 PM |
|
RX580 on Lyra2z = 3.5-3.6 MHs Vega - 6-7MHs which miner are you using for RX580, the one I tried were much lower than that...
|
|
|
|
hogwash.89m
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 06, 2018, 07:11:05 PM |
|
In mixed nvidia rig 6 cards = 1 x 1080ti + 5 x 1080 1080ti PL 90 CC +110 MEM -400 1080 PL 90 CC +120 MEM -400 Gains are almost 1 Mh/s after about hour of mining, but strange is that both miners will sometimes slow down and after some time speed up, it is in magnitued about ~2 Mh/s for ccminer and ~1Mh/s for coolminer. I dont know what is culprit, rig is table other algos (Equihahs) don't have such large variations. ccminer 2.2.5 ~ 15.15 - 15.17 Mh/s https://i.imgur.com/J4J0COo.pngcoolMiner 1.1 ~ 15.96 - 15.97 Mh/s https://i.imgur.com/o7kNnxh.pngThis is while mining GINcoin on eu.bsod.pw , with ping to stratum ~40ms. Keep the good work!
|
|
|
|
artsun
Jr. Member
Offline
Activity: 166
Merit: 1
|
|
June 06, 2018, 07:44:21 PM |
|
tell me what speed is at 1066 does this coolMiner?
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
June 06, 2018, 08:38:29 PM |
|
Are there any 1.1 binaries for linux?
|
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 08:55:26 PM |
|
I tried and now I see that some one manage to use it: https://arcpool.com/site/minerscoolMiner/1.0 = Linux version coolMiner/v.1.0 = Win Should I have to include other files with the compiled ccminer so all can use it? or only the ccminer binary? because its work on my pc. I have decided to use clean latest ccminer 2.2.6 by tpruvot@github and modify it instead of brian112358@github fork, it was much more work and now it ready and I am testing it,also I have set the Max opt_retries to 5 and opt_fail_pause = 5 so it will not stuck if there is connection problem, you can also modify it in the bat file. Hope this will fix the problems, I will update soon. Edit: Wow , thank you all :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 06, 2018, 09:25:25 PM |
|
I have decided to use clean latest ccminer 2.2.6 by tpruvot@github and modify it instead of brian112358@github fork,
OK, only from where you have the source of tpruvot ccminer 2.2.6?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 06, 2018, 09:34:34 PM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 06, 2018, 10:23:38 PM |
|
Ok, your choice. I think ver 2.2.5 will be better. 2.2.6 is under dwveloptment and noone knows what issues it has. Ver 2.2.5 IMO is stable.
|
|
|
|
maxgam
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 07, 2018, 03:45:39 AM |
|
Been testing this miner for 24 hours. Rig with 6x 1080 TI GPUs: ccminer 2.2.5 - 20 Mh This miner - 21 Mh Also, after dev pool job -it just got stuck forever. And dev fee... I think it does not worse it. hash gain does not cover dev fee.
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 07, 2018, 06:02:00 AM |
|
Been testing this miner for 24 hours. Rig with 6x 1080 TI GPUs: ccminer 2.2.5 - 20 Mh This miner - 21 Mh Also, after dev pool job -it just got stuck forever. And dev fee... I think it does not worse it. hash gain does not cover dev fee.
I stay on ccminer 2.2.5
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 07:55:53 AM |
|
Important Update: Please Update to coolMiner-v1.2!Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue. Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead. Download:https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.ziphttps://file.fm/f/meham7f6
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 07, 2018, 08:27:52 AM |
|
Ok, I'm testing
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 07, 2018, 09:04:15 AM |
|
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
maxgam
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 07, 2018, 09:33:20 AM |
|
No difference, still very close to cc 2.2.5
|
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 07, 2018, 09:42:42 AM Last edit: June 07, 2018, 10:27:08 AM by DonMaxim |
|
Excellent job!!! I got 3.71 mh with my 1080 ti... I am switching back to this last coolminer-v1.2... Thanks for good job... Max Edit: I don’t know why but angrypool benchs not saving all my benchmarks, or someone is removing it...
|
|
|
|
ShowMeCoins
Member
Offline
Activity: 129
Merit: 11
|
|
June 07, 2018, 09:47:28 AM |
|
.. coolMiner/1.0 = Linux version ...
Yup, that's me . 12x1080ti running without problems.
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 07, 2018, 09:48:41 AM |
|
After 1h looks good. There are no problems with connection to NH eu and Angrypool. Hashrate is similar to ver. 1.1
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 09:56:17 AM |
|
_Dr2 -thanks 4 update!. .. coolMiner/1.0 = Linux version ...
Yup, that's me . 12x1080ti running without problems. Nice to meet you :-), What did you do to run it? because djm34 sad it's not working and I see that only you were able to, thanks in advance! not working on linux
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ShowMeCoins
Member
Offline
Activity: 129
Merit: 11
|
|
June 07, 2018, 10:11:03 AM |
|
If you mean that tpruvot version 2.2.6 is not working.....could be. I've compiled it once (gcc-6, cuda 9.2), it failed, I switched back to 2.2.5. Then you came with CoolMiner (you've only released 1 linux version) and that gave me a 10-15% increase in output. I never changed the miner syntax and already used the '-p c=COIN,stats'-switch in place.
EDIT It's not the compiling that failed, it's the Lyra2z that failed /EDIT
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 10:20:08 AM Last edit: June 07, 2018, 11:16:20 AM by Ryzen2700x |
|
So you could run my Linux binary without problem? I am wondering if its using shared files on destination PC and some users don't have this files and so they can't run my Linux binary, I use the autogen.sh and then build.sh like in the tutorials and compressed the binary and upload it here, should I have another files with it? (from Solidworks world I'm referring to "pack and go" ). Thanks in advance!. Edit: Congrats to this miner with a record for 1070Ti! You crashed my score with Zotac 1070Ti mini @2.5MHs , now lets see who is going to crash my score with 1080Ti@3.81Mhs on Zotac Amp Extreme :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ShowMeCoins
Member
Offline
Activity: 129
Merit: 11
|
|
June 07, 2018, 11:17:15 AM Last edit: June 07, 2018, 11:33:29 AM by ShowMeCoins |
|
So you could run my Linux binary without problem? I am wondering if its using shared files on destination PC and some users don't have this files and so they can't run my Linux binary, I use the autogen.sh and then build.sh like in the tutorials and compressed the binary and upload it here, should I have another files with it? (from Solidworks world I'm referring to "pack and go" ). Thanks in advance!.
PM'ed you a list of libraries in use by CoolMiner. I think the biggest hurdle must be the reference to the Cuda 9.2 'libcudart.so.9.2'. Which means they should install the latest CUDA. ..now lets see who is going to crash my score with 1080Ti@3.81Mhs on Zotac Amp Extreme Not fair, looks like my stats never show up in the benchmarks.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 12:37:47 PM |
|
Only coolMiner-v1.1 and up support sending stats to pool, I made coolMiner-v1.2L binary for you so you can try: https://nofile.io/f/rJCB6DFnwR6/coolMiner-Linux-v1-2L.tar.gzDo you know the command line to force including libcudart.so.9.2 in the binary file like on the windows binary? (on visual studio I have :""Static CUDA runtime library (-cudart static)").
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 07, 2018, 12:55:48 PM |
|
Can you please add the bug fix SP added for multi-GPU rigs to get to 100% utilization at launch? Wen starting the miner, on my 12 GPU rigs it takes anywhere from 7 to over 15 minutes for all GPUs to get to 100% utilization and hashing at their full potential. During the first few minutes, many of the GPUs are completely idle. Please see: https://github.com/sp-hash/suprminerspecifically: https://github.com/sp-hash/suprminer/commit/265ab574ed56fddd164023dae9d34e8fe0504202with the Suprminer/SP-Hash miner the GPUs go to 100% utilization on Lyra2z within the first minute or two.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 07, 2018, 01:05:49 PM |
|
After ~5h coolminer works as it should on 96 GPU.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 01:49:43 PM |
|
Will check it, thank you for the Tip :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 02:34:42 PM Last edit: June 07, 2018, 03:59:18 PM by Ryzen2700x |
|
Update: coolMiner-v1.3 !Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs". Download-New Link:https://nofile.io/f/cxRVoY5kRT3/coolMiner-x64-v1-3.zip
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 07, 2018, 03:24:36 PM |
|
awesome.. downloading in a few mins
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
boomboommin
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 07, 2018, 03:40:29 PM |
|
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 04:00:28 PM |
|
Try now: I think those Intel security patches aren't over yet... Update: coolMiner-v1.3 !Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs". Download-New Link:https://nofile.io/f/cxRVoY5kRT3/coolMiner-x64-v1-3.zip
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 07, 2018, 06:24:11 PM |
|
Been running 1.2 on my 1080ti's for the past 6 or 7 hrs and it's running wonderfully...Ran 1.1 overnight without issues. setting all of my 1080ti's to run -i 20 with 2012 core TDP 100 and getting approx 3.615. About a 6% bump from 2.2.5. Great job.
|
|
|
|
2stout
|
|
June 07, 2018, 06:50:42 PM |
|
I can say after trying this, a definite performance improvement worth the dev fee; a win-win scenario for both miners and dev, Thx Again!
|
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 07, 2018, 07:29:33 PM |
|
After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)
overall gain from 2.2.5 was 3%
going to take 1.3 for a spin and coming back with feedback
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 07, 2018, 07:32:53 PM |
|
Tried 1.3 stable for me with 2x1070+1x1080+3x1080Ti overall @17MH/s
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 07, 2018, 07:33:26 PM |
|
After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)
overall gain from 2.2.5 was 3%
going to take 1.3 for a spin and coming back with feedback
What card?
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 07, 2018, 07:44:56 PM |
|
@Ryzen2700x
huge improvement with 1.3 as far as getting the GPU's up to speed and working.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 07, 2018, 07:52:49 PM |
|
After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)
overall gain from 2.2.5 was 3%
going to take 1.3 for a spin and coming back with feedback
What card? 1080ti
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 07, 2018, 08:11:05 PM |
|
After 7h:42m of running 1.2, 2 out of 4 rigs crashed when the stratum was changed for dev's fee (Illegal memory access..)
overall gain from 2.2.5 was 3%
going to take 1.3 for a spin and coming back with feedback
What card? 1080ti Strange...I'm seeing 5-6% boost from 2.2.5 with the settings I posted earlier with my 3 rigs of 1080ti's EVGA and Gigabyte. No crashes yet...What is your core at? Do you keep it consistent through all the cards? I do see the stratum change to 2, I'm assuming that's when the devfee goes in. Seems it should be possible to not have it shift the stratum when switching to dev fee...? Maybe 1.3? Haven't tried yet...I use a set stratum.
|
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 07, 2018, 08:27:08 PM Last edit: June 07, 2018, 08:39:08 PM by thebd |
|
the 7h average hashrate was 28.7mh/s for 8*1080ti and i was doing 27.8mh/s before with 2.2.5, so overall real increase is 3%
the time needed to reach full speed back from stratum switch is affecting overall performace
i suggest a discord channel to compile some direct feedback... @Ryzen
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 08:41:25 PM Last edit: June 07, 2018, 09:10:35 PM by Ryzen2700x |
|
"(Illegal memory access..)" can be caused by many reasons, many cases found when searching ccminer +Illegal memory access, most of the time is stebility issu with OC/power/Drivers etc, maybe you are on the edge of the stability and then the pool switch come and I see this codes are before/after :""// reset default mem offset before idle.." " // reapply mem offset if needed ", I don't know if this related, you should start isolating the problem maybe 1 GPU makes all the trouble. Also- what did you mean by that: the 7h average hashrate was 28.7mh/s for 8*1080ti and i was doing 27.8mh/s before with 2.2.5, so overall real increase is 3% You mean the speed you saw on 7th excepted share? if so it's not accurate, min is 30. and I recommend testing it on version coolMiner-v1.3 since it's start @full load much faster. Also l think that on lyra2z coins that the block/hour is high, it's better to use lower intensity (~19) versus 20~21 because it increases the chance that new bock found and the nonce you find after get discarded (hashing takes too long). and coolMiner has lower penalty when lowering the intensity versus ccminer 2.2.5. (i have posted bench results few page back). Edit- found it:https://bitcointalk.org/index.php?topic=498930.msg5492268#msg5492268GPU operate in a "batch" mode. They start hashing and attempt so many hashes before stopping to return results. The higher the intensity the more hashes the card attempts in one batch but also the longer the batch takes. The card only returns results at the end of the batch. The higher the intensity (and longer the batch) the more shares which are computed but never "delivered" before the block changes and they become stale. On the other hand the lower the intensity the more of the GPU time spent setting up and taking down batches which means a lower raw hashrate
You get paid for shares (or work) accepted so that is what you should be looking to maximize. It is possible the accepted rate is still higher even with a higher rejected rate because the gross (raw) hashrate is higher.
Simplified example 100 shares gross w/ 1% rejected = 99 shares accepted 120 shares gross w/ 10% rejected = 102 shares accepted.
The later is more profitable. Since you get "paid" for shares accepted that is the number you want to maximize.
This is what I have wrote few pages back:Edit:I have tested it: -i 16 vs -i 21: ccminer ~8% penalty vs coolMiner ~3% penalty . -i 17 vs -i 21: ccminer ~4% penalty vs coolMiner ~1.5% penalty . You can test it yourself.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 07, 2018, 08:51:03 PM |
|
1.3 is in the grinder right now, will post progress at 12-24-36h
|
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
|
June 07, 2018, 08:54:37 PM |
|
Thanks for your efforts on releasing this new miner. It looks like it an competitive alternative to existing Lyra2z miners. I’m working on including it my software, Hash Auger, but I was disappointed to see that it requires Cuda SDK 9.2. Considering all the issues surrounding the new Nvidia drivers on Windows, many people are still reluctant to update from 391.35. For example, 398.11 has a known issue with multiple GPUs and certain motherboard chipsets. Any plans to release a version of CoolMiner compatible with 9.1 or does it depend on features in the new SDK? Also, since most devs of mining software recommend 32-bit versions, is there any particular reason why CoolMiner is 64-bit?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 07, 2018, 09:08:18 PM |
|
Thank you, I was asked if I could recompile with cuda 9.1 and I did try but I saw that the some of the performance gains that I had with my mods got lost and the end results wasn't justifying the added fee so there is no benefit for the miners to use it, so it's only cuda9.2. Regarding 64bit vs 32bit, I know that before cuda 9 the 32bit had better performance but since then 64bit is better or equal, if there is a demand for it I can try to compile 32 bit and test it if the speed is same.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
|
June 07, 2018, 09:49:32 PM Last edit: June 07, 2018, 10:15:50 PM by HashAuger |
|
Thank you, I was asked if I could recompile with cuda 9.1 and I did try but I saw that the some of the performance gains that I had with my mods got lost and the end results wasn't justifying the added fee so there is no benefit for the miners to use it, so it's only cuda9.2. Regarding 64bit vs 32bit, I know that before cuda 9 the 32bit had better performance but since then 64bit is better or equal, if there is a demand for it I can try to compile 32 bit and test it if the speed is same.
Thank you for the prompt reply. Based on what I have read about Cuda 9.2, there are some optimizations not found in 9.1, so it is understandable that it may not run as fast with the earlier SDK. Unfortunately it is a bit late in my own development cycle to upgrade my device drivers to support 9.2, but after my next release I will do so to test integrating your software into Hash Auger. Regarding 64-bit vs 32-bit, I am not sure if Lyra2z benefits from the extra CPU precision that the 64-bit code provides. If not, the smaller memory footprint and file size of a 32-bit version may benefit those users with limited RAM.
|
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
June 07, 2018, 10:38:48 PM Last edit: June 08, 2018, 12:01:56 AM by CryptoSifus |
|
Trying on 398.11 and I have one of 6 GPU losing power about once every 7-8hrs. Not the same one and doesn't happen on 2.2.5
Also w/ v1.3 the load time to take it to max hash is still about 30-40mins. That's a long time to recover if the miner disconnects or resets.
What times are you guys seeing to get to top avg hash?
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 07, 2018, 10:59:40 PM |
|
Im using the 397.31, stable whit this after 7 hours.
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
June 07, 2018, 11:01:50 PM |
|
What is the most profitable coin for this algo?
Thanks
|
|
|
|
soggyminer
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 07, 2018, 11:04:36 PM |
|
What driver supports this.
Getting a "your system does not support cuda 9.2 api" error when launching the miner. I downloaded and installed everything but the driver directly from nvidia. Currently running nvidia 390.77
For some reason my rig crashes when I install the latest drivers. Won't accept more than one GPU when I run them. Help!
I've been running 398.11 since yesterday without any issues (on multiple multi-gpu rigs). I believe 396.xx is the minimum for CUDA 9.2 support. As HashAuger stated earlier, some people have reported issues with 398.11 and multiple GPUs. You could always try running DDU before installing the new drivers if nothing else is working: http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
|
|
|
|
dkbit98
Legendary
Offline
Activity: 2226
Merit: 7147
|
|
June 07, 2018, 11:20:25 PM |
|
I tried with my edited BAT file, but it is not working, and mining window is closing.
Anyone have the .bat template or instructions ?
Thank you ! There are many now many coins with Lyra2z algo, but just few of them are profitable to mine. Miners can only hope for future price rise
|
. .HUGE. | | | | | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . CASINO & SPORTSBOOK ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | |
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
June 08, 2018, 12:04:33 AM |
|
What driver supports this.
Getting a "your system does not support cuda 9.2 api" error when launching the miner. I downloaded and installed everything but the driver directly from nvidia. Currently running nvidia 390.77
For some reason my rig crashes when I install the latest drivers. Won't accept more than one GPU when I run them. Help!
I've been running 398.11 since yesterday without any issues (on multiple multi-gpu rigs). I believe 396.xx is the minimum for CUDA 9.2 support. As HashAuger stated earlier, some people have reported issues with 398.11 and multiple GPUs. You could always try running DDU before installing the new drivers if nothing else is working: http://www.guru3d.com/files-details/display-driver-uninstaller-download.htmlThanks for reply, I did try for a fresh install but I can't get the driver to complete install on a 4 card rig. Crashes 3/4 of the way through and puts the computer into startup repair mode. If I disconnect 3/4 cards I can get it to load again, but if I add new ones it does the same thing. Crash, reboot, startup repair mode...
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
z0mb13m4n
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 08, 2018, 02:30:00 AM Last edit: June 08, 2018, 04:10:23 AM by z0mb13m4n |
|
I'm getting 3.5 at most on 1080 ti's using the OC shown. At 1050mv i can get 3.5mh/s on every 1080ti, hence the one card in the picture showing ~3.45mh/s. All the others are locked at 950. Other cards seem to improve slightly too. This was after running it for over an hour. No clocks over 1975 mhz for core. Mem untouched. P0 state on all cards. https://pasteboard.co/HoSijoA.jpgEdit: Was able to get 3.56mh/s on all 4 1080 ti's with clocks pushed to 2050mhz core at 1075mv or lower. 1080 up to 2.5mh/s with 1050mv and 2050mhz core. 1060 to almost 1.3mh/s same settings. 2k on 1070 with core upped to 2150mhz at 1050mv. Was on -i 17
|
|
|
|
soggyminer
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 08, 2018, 03:44:25 AM |
|
I'll go ahead and throw up my numbers as I have been running this since yesterday:
EVGA FTW3 1080 ti - 3760 kH, +115 core (2088) EVGA FTW 1070 ti - 2448 kH, +150 core (2012) EVGA SC2 1070 - 1985 KH, +150 core (2062) EVGA FTW 1060 3GB - 1160 kH , +115 core (2025)
Edit: -i 19
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 08, 2018, 03:48:24 AM |
|
Edit: Was able to get 3.56mh/s on all 4 1080 ti's with clocks pushed to 2050mhz core at 1075mv or lower. 1080 up to 2.5mh/s with 1050mv and 2050mhz core. 1060 to almost 1.3mh/s same settings. 2k on 1070 with core upped to 2150mhz at 1050mv.
Update your nvidia driver. -i 20 2012 mhz @ 1050 mv will get you over 3.6 on a 1080ti
|
|
|
|
soggyminer
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 08, 2018, 03:58:15 AM |
|
What driver supports this.
Getting a "your system does not support cuda 9.2 api" error when launching the miner. I downloaded and installed everything but the driver directly from nvidia. Currently running nvidia 390.77
For some reason my rig crashes when I install the latest drivers. Won't accept more than one GPU when I run them. Help!
I've been running 398.11 since yesterday without any issues (on multiple multi-gpu rigs). I believe 396.xx is the minimum for CUDA 9.2 support. As HashAuger stated earlier, some people have reported issues with 398.11 and multiple GPUs. You could always try running DDU before installing the new drivers if nothing else is working: http://www.guru3d.com/files-details/display-driver-uninstaller-download.htmlThanks for reply, I did try for a fresh install but I can't get the driver to complete install on a 4 card rig. Crashes 3/4 of the way through and puts the computer into startup repair mode. If I disconnect 3/4 cards I can get it to load again, but if I add new ones it does the same thing. Crash, reboot, startup repair mode... Have you tried switching pci-e slots for your risers? I have 1 weird rig that won't boot period if certain pci-e slots are used (1,2,4,6....if i use 3 or 5 the rig doesn't boot)
|
|
|
|
z0mb13m4n
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 08, 2018, 04:10:38 AM |
|
Thanks jebidia
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 08, 2018, 04:24:19 AM |
|
Thanks jebidia
No worries,. That help?
|
|
|
|
|
boomboommin
Newbie
Offline
Activity: 92
Merit: 0
|
|
June 08, 2018, 07:18:39 AM |
|
v 1.3 is more stable. speed same v 1.1
|
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 08, 2018, 07:36:23 AM |
|
Can't download it from nofile.io
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 08, 2018, 07:45:53 AM |
|
Added file.fm link: coolMiner-v1.3:https://file.fm/f/q7fkdz3z
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 08, 2018, 08:03:01 AM |
|
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 08, 2018, 08:14:17 AM |
|
All works on my side- seems like connection problems like with NiceHash EU. Try this:coolMiner-v1.3: Download Link: http://www.sendfiles.net/?uid=b7b1-73a3a1b5Password: yTYvRzaI
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 08, 2018, 08:18:31 AM |
|
This nice one) dowload ok Thanx!
|
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 08, 2018, 08:26:37 AM |
|
My results
My rig on 4 GPU runs on coolMiner v. 1.1 almost 2 days stabilyty with no crashes GPU # 1: EVGA GTX 1080 Ti - 3575 kH/s GPU # 2: ASUS GTX 1080 Ti - 3581 kH/s GPU # 3: ASUS GTX 1080 Ti - 3595 kH/s GPU # 4: ASUS GTX 1080 Ti - 3601 kH/s All GPUs run on 1999 MHz, -i=19.75
Good JOB! and thanks to Ryzen2700x
|
|
|
|
valentoz
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 08, 2018, 03:22:12 PM |
|
Cкaчaл нoвyю вepcию 1.3 вcё paбoтaeт cтaбильнo бeз нapeкaний, в пpoчeм и нa пpeдыдyщиx вepcияx пpoблeм никaкиx нe былo. C 6 штyк Palit 1070ti выдaeт 15mh/s!!! Этo нo 1,5 mh бoльшe чeм нa ccminer 2.2.5! Блaгoдapю зa кaчecтвeнный мaйнep!
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 08, 2018, 06:33:25 PM Last edit: June 08, 2018, 06:44:54 PM by m1hyka |
|
Version 1.3 after 24 Hours still working stable. Config: plimit 50 all cards, GPU+0mhz, mem +0 mhz , i=19 Geforce Driver: 398.11 fresh one 2x MSI Armor GTX 1070 @~1870khash/s 1x Gigabyte GTX 1080 @ ~2560khash/s 3x Inno3d Ichill x4 1080Ti @~3440khash/s Overall ~16,5Mhash/s and still stable, power consumption the whole machine: 717W at the wall. With CCminer 2.2.5 overall i had ~14,3Mhash and 700W power consumption. So i think overall i have 13%+ mining power, good job Ryzen2700x . Testing an MSI Gaming X 1008Ti with Plimit 50, i=21 , GPU+100mhz @2Ghz, and Mem-500 and the result is: Driver the same as the 6 card rig. [2018-06-08 20:37:56] GPU #0: 1998 MHz 27.76 kH/W 127W 62C FAN 35% [2018-06-08 20:38:39] GPU #0: MSI GTX 1080 Ti, 3538.46 kH/s
|
|
|
|
qlol
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 08, 2018, 07:16:07 PM |
|
when linux build?
|
|
|
|
mtx_demon
|
|
June 09, 2018, 12:34:19 AM |
|
linux build??
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
June 09, 2018, 03:37:49 AM |
|
Thanks! Could you compile a CUDA 9.1 version? The lastest drivers are buggy with Afterburner/Xtreme Tuner (freezes at applying overclock) and requires lastest Windows version.
|
|
|
|
Walker0118
Full Member
Offline
Activity: 347
Merit: 100
😶😶😶😶😶
|
|
June 09, 2018, 10:35:08 AM |
|
When the dev fee kicks in the Miner says " retry in 5 sec. " but then doesnt go back. So the mining is down every hour and i have to reset i manualy. Anyone with the same issue ?
|
|
|
|
_Dr2
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 09, 2018, 11:04:05 AM |
|
When the dev fee kicks in the Miner says " retry in 5 sec. " but then doesnt go back. So the mining is down every hour and i have to reset i manualy. Anyone with the same issue ?
Which version you use?
|
|
|
|
botinok054
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 09, 2018, 11:15:50 AM |
|
Explain pliz from the beginning as to download and force to work. Thanks for earlier!
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 12:41:18 PM Last edit: June 10, 2018, 11:43:15 AM by JackIT |
|
Head to Head test of CoolMiner 1.3 Vs ccminer 2.2.5
Hash rate numbers are vanity metrics and can be gamed. The only thing I care about is " which miner puts more coins in my wallet?" I've done dozens of Head to Head tests in the past see: https://bitcointalk.org/index.php?topic=3385643.0I've decided to test CoolMiner 1.3 Vs ccminer 2.2.5 to see which one mines more coins. The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Test 1 Results: CoolMiner 1.3 wins by 7.72%Duration: 360 minutes Default intensity: 16; pool set variable diff - I stopped the test early, because I wanted to see both miners running a static pool diff and 20 intensity
Test 2 Results: CoolMiner 1.3 wins by 2.51%Duration: 855 minutes -i 20; pool diff = 10 This test was very close from the outset, much closer than Test 1.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 12:47:10 PM |
|
Head to Head test of CoolMiner 1.3 Vs ccminer 2.2.5
Hash rate numbers are vanity metrics and can be gamed. The only thing I care about is " which miner puts more coins in my wallet?" I've done dozens of Head to Head tests in the past see: https://bitcointalk.org/index.php?topic=3385643.0I've decided to test CoolMiner 1.3 Vs ccminer 2.2.5 to see which one mines more coins. The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Intensity: miner default (CoolMiner: 16, ccminer: 22) Drivers: Nvidia 397.93 Results: IN PROGRESSThanks :-), But why you are testing @ Intensity =16 on my miner? LOL, the Intensity calc is same on ccminer and coolMiner so use the same on both if you like the compression to be accurate. If you compare both miners @ Intensity =16(cuda threads =65536) then then it will be more interesting :-), Waiting for the results, it's like a race :-). P.S: please update the drivers to get the full speed from my minre: https://bitcointalk.org/index.php?topic=4412370.msg39621361#msg39621361Thanks for your effort :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 12:56:09 PM |
|
Thanks :-), But why you are testing @ Intensity =16 on my miner?
It's your fault. 1st test I run, uses default settings. You set the default at 16, not me.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 01:03:45 PM |
|
cuda_get_arch(thr_id); int intensity = (device_sm[dev_id] > 500 && !is_windows()) ? 17 : 16; if (device_sm[dev_id] <= 500) intensity = 15; throughput = cuda_default_throughput(thr_id, 1U << intensity); // 18=256*256*4; if (init[thr_id]) throughput = min(throughput, max_nonce - first_nonce); It should be 16 on ccminer too, where did you get 22 as default? Also- even so- coolMiner already has a lead on your Balance and this is with 3% speed penalty for running at -i 16 vs ccminer @ 22 :-) -i 16 vs -i 21: ccminer ~8% penalty vs coolMiner ~3% penalty . -i 17 vs -i 21: ccminer ~4% penalty vs coolMiner ~1.5% penalty . Time to grab a Popcorn :-), Let the Race begin!
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
qlol
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 09, 2018, 01:16:30 PM |
|
linux build??
linux version, especially for HiVeOS
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 01:18:33 PM |
|
It should be 16 on ccminer too, where did you get 22 as default?
crap you. you're right. I'm using Awesome Miner to manage my rigs (doesn't use bat files).. and had ccminer 2.2.5 configured to run -i 22 on Lyra2z. Let me restart the test with new addresses/
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 01:29:13 PM |
|
OK, test restarted, with new addresses, updated in original post.
sorry about that, completely forgot about the Awesome Miner configs
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 01:30:14 PM Last edit: June 09, 2018, 03:21:11 PM by Ryzen2700x |
|
NP, thing is that I was playing with the code for months so I remember how it works . Thank you very much for your time, its real fun to watch the competition . Edit: it's interesting, on first run my miner@16 intensity had clear lead on ccminer @ 22 intensity but now it's like ccminer works better at 16 intensity, (unless we have troll here who tries to send shared to same address lol). Moreover- this pool stratum is't very smart and wastes your hashing power, coolMiner is stuck @ diff 18 while ccminer @ 12, this is very bad since I see blocks comes to pool every 30~60 sec and that means that card are stuck in loop for finding too high diff share and every new block it breaks out from loop and you got no share. The lesson from this is not to trust the pool and set the Diff according the hashing power and block per min so you can send shares in time between blocks. Edit: now it set diff = 26 on coolMiner(faster rigs get higher stratum diff ), there is no chance 4 1080Ti will send enoght shares in between new blocks(few seconds).Edit: if you can- next run try testing it on 21 intensity like many miners used on 1080Ti till now, and set static diff on the miners so there will be no Diff changing factor.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 04:45:54 PM |
|
NP, thing is that I was playing with the code for months so I remember how it works . Thank you very much for your time, its real fun to watch the competition . Edit: it's interesting, on first run my miner@16 intensity had clear lead on ccminer @ 22 intensity but now it's like ccminer works better at 16 intensity, (unless we have troll here who tries to send shared to same address lol). Moreover- this pool stratum is't very smart and wastes your hashing power, coolMiner is stuck @ diff 18 while ccminer @ 12, this is very bad since I see blocks comes to pool every 30~60 sec and that means that card are stuck in loop for finding too high diff share and every new block it breaks out from loop and you got no share. The lesson from this is not to trust the pool and set the Diff according the hashing power and block per min so you can send shares in time between blocks. Edit: now it set diff = 26 on coolMiner(faster rigs get higher stratum diff ), there is no chance 4 1080Ti will send enoght shares in between new blocks(few seconds).Edit: if you can- next run try testing it on 21 intensity like many miners used on 1080Ti till now, and set static diff on the miners so there will be no Diff changing factor. the pool diff isn't as big of an issue as you may think, even with short block times. yiimp uses a modified PPS payment scheme... When a block is found, yiimp pools divide the block reward proportionally among valid shares for that algo/coin and then delete valid shares older than 5 minutes. The shares need not correspond to the found block.. So on a coin with very short TTF, you'll get paid based on the last 5 mins of submitted shares. https://github.com/tpruvot/yiimp/blob/next/web/yaamp/core/backend/blocks.php
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 04:57:42 PM |
|
Thanks for the info, but I am concerned on the miner side, if the GPU is working to find high diff for too long while new blocks are coming in 20~40 seconds then every time it breaks out of hashing loop and gets new job, so you should choose more optimized diff value that doesn't take the GPU too much time to find a share between blocks otherwise you are wasting your GPU time. This is relevant for every miner not just mine. P.S- I think you are already loosing coins for running ccminer 2.2.5 .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 05:23:21 PM |
|
Thanks for the info, but I am concerned on the miner side, if the GPU is working to find high diff for too long while new blocks are coming in 20~40 seconds then every time it breaks out of hashing loop and gets new job, so you should choose more optimized diff value that doesn't take the GPU too much time to find a share between blocks otherwise you are wasting your GPU time. This is relevant for every miner not just mine. P.S- I think you are already loosing coins for running ccminer 2.2.5 . Agreed, the next test I run will be with a static pool diff, and intensity at 20
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 09, 2018, 05:35:52 PM |
|
Thank you for running these tests. Very useful information.
|
|
|
|
ssiver
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 09, 2018, 05:44:00 PM |
|
Im looking for info regrading the dev fee. How many %, interval for switching to dev pool etc... I can't find it?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 05:54:23 PM |
|
If you judge by this test -then the " dev fee" dudes fee is over (-10)% . that means that my miner pays you over 10% extra(Just don't tell the "Big Farms"...) . https://bitcointalk.org/index.php?topic=4412370.msg39718659#msg39718659
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ssiver
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 09, 2018, 06:13:47 PM |
|
"Big Farms" already know of your miner, bro. And we already know its faster than ccminer225 too - good job btw Looking for more info regarding dev fees and pool switching?? Its interesting to know, this being closed-source and all...
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 06:28:05 PM |
|
Yes I know, but they must be less happy to know about it after paying good amount of BTC for their "Privet miner" . It's every hour+ and less then 60 sec. HF .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 09, 2018, 06:37:40 PM |
|
linux build??
linux version, especially for HiVeOS I have asked for help via PM on his thread, still waiting for answer if he can help. If you can help me and modify the build scripts of https://github.com/tpruvot/ccminer/tree/linux so the binary will include all the necessary files (libcudart.so.9.2 etc) so every one with cuda 9.2 drivers can use it I will be happy to compile it again. for now I compiled it : autogen.sh configure.sh build.sh And it works on my pc + other forum member with cuda 9.2 toolkit installed also manage to run it. https://bitcointalk.org/index.php?topic=4412370.msg39576233#msg39576233P.S- If I will include the libcudart.so.9.2 in the zip- would it help?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 09, 2018, 07:45:44 PM |
|
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
hrusttt55
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 09, 2018, 08:25:29 PM |
|
I downloaded version 1.2 and it's been working fine for 24 hours. Hashrait increased,the intensity is left 19.75,stale 0.5% Thats good!
|
|
|
|
Shazza1977
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 07:30:04 AM Last edit: June 10, 2018, 07:43:13 AM by Shazza1977 |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
|
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 10, 2018, 10:43:21 AM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
join me at https://discord.gg/tkgwv3y
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 10:51:33 AM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 10:56:17 AM |
|
JackIT: what do you think, next round on same intensity 20~19 but without static diff? it looks like the Var-diff gave better results(or 10 diff was too low?).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
thebd
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 10, 2018, 11:04:14 AM |
|
JackIT: what do you think, next round on same intensity 20~19 but without static diff? it looks like the Var-diff gave better results(or 10 diff was too low?).
you should set 2.2.5 with d=10 and coolminer with var-diff
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 11:44:11 AM |
|
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 11:50:13 AM |
|
JackIT: what do you think, next round on same intensity 20~19 but without static diff? it looks like the Var-diff gave better results(or 10 diff was too low?).
I think it's safe to assume that coolminer produces more coins than ccminer, and so I'd like move on to testing various settings for coolminer. Next test will be coolminer with and without static pool diff.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 11:53:15 AM Last edit: June 10, 2018, 12:06:57 PM by Ryzen2700x |
|
Thanks, I am also interested on Var-Diff vs different static diff relative to hashing power, it's seems it can increase/decrease income regardless the miner used, really interesting tests you are doing as a service for the forum- GJ. P.S - in the first test I was very curious why pool was choosing almost double the diff for coolMIner, even though I was thinking it was too high- it came out to be better choice by the pool stratum? P.S - I advice you to choose the lowest intensity that doesn't reduce the hash-rate (+- 50kh\s acceptable), as you have seen the speed penalty is lower then on ccminer, and maybe this way less rejects of job not found/discarded work because new bock, it should be around 18~19. and other rig you can try 20~22 what you like.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 12:42:59 PM |
|
Thanks, I am also interested on Var-Diff vs different static diff relative to hashing power, it's seems it can increase/decrease income regardless the miner used, really interesting tests you are doing as a service for the forum- GJ. P.S - in the first test I was very curious why pool was choosing almost double the diff for coolMIner, even though I was thinking it was too high- it came out to be better choice by the pool stratum? Yiimp pools adjust diff in order to achieve 5 to 15 submitted shares per minute. The fact that 5-15 is such a wide range, it can easily lead to double diff of small numbers. What I did notice with coolminer is that, static diff penalizes the miner immediately after the dev fee is run. instead of the pool diff ramping up from 1, it was immediately at 10. P.S - I advice you to choose the lowest intensity that doesn't reduce the hash-rate (+- 50kh\s acceptable), as you have seen the speed penalty is lower then on ccminer, and maybe this way less rejects of job not found/discarded work because new bock, it should be around 18~19. and other rig you can try 20~22 what you like.
I run -i 18 on all of my other rigs, intensity doesn't seem to make a big impact on Lyra2z. I'll probably test different intensity setting in future tests.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 01:28:01 PM Last edit: June 11, 2018, 12:18:34 AM by JackIT |
|
TEST 3: Head to Head test of CoolMiner 1.3 - static Vs variable stratum diff
PREVIOUS Coolminer tests: https://bitcointalk.org/index.php?topic=4412370.msg39718659#msg39718659
Sometimes setting a static pool diff will yield more coins, sometimes it won't. Finding the optimal static diff is really difficult, you're often better off letting the pool set your diff. Anyhow, this test is underway to see how setting a static diff of 10 (aprox 0.7/MHs) versus letting the pool set the diff will impact the amount of coins you earn. Caveat: I have no idea if a diff of 10 is the optimal choice. The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Intensity: 20 Test Results: No meaningful differenceDuration: 667 mins .
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
CryptoFreedom101
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 10, 2018, 02:00:22 PM |
|
NP, thing is that I was playing with the code for months so I remember how it works . Thank you very much for your time, its real fun to watch the competition . Edit: it's interesting, on first run my miner@16 intensity had clear lead on ccminer @ 22 intensity but now it's like ccminer works better at 16 intensity, (unless we have troll here who tries to send shared to same address lol). Moreover- this pool stratum is't very smart and wastes your hashing power, coolMiner is stuck @ diff 18 while ccminer @ 12, this is very bad since I see blocks comes to pool every 30~60 sec and that means that card are stuck in loop for finding too high diff share and every new block it breaks out from loop and you got no share. The lesson from this is not to trust the pool and set the Diff according the hashing power and block per min so you can send shares in time between blocks. Edit: now it set diff = 26 on coolMiner(faster rigs get higher stratum diff ), there is no chance 4 1080Ti will send enoght shares in between new blocks(few seconds).Edit: if you can- next run try testing it on 21 intensity like many miners used on 1080Ti till now, and set static diff on the miners so there will be no Diff changing factor. So what would you recommend setting the Diff to for 8-1080ti's? How do i calculate the diff myself? And what is the multiple per 1080ti? In case i have to group my gpu's.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 02:06:48 PM |
|
I am not sure, this id why JackIT's test is so interesting, I will wait for the results. P.S, its good you are testing against d=10, this way the last test relevant and it gonna tell us if and how fast this miner would be @ -i 20 and Var-Diff against ccminer @ d=10.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Shazza1977
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 05:37:15 PM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe Ok tried this and no luck , its the same instant error message "The application was unable to start correctly (0xc000007b) ... " This is one stubborn problem :-(
|
|
|
|
Eketubol
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 06:17:10 PM |
|
I'm having issues with this miner, I create the bat file and when I click on it the miner window appears and then disappears really fast. Enemy Miner works fine and so does CCminer. What do I need to do to fix this?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 06:29:18 PM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe Ok tried this and no luck , its the same instant error message "The application was unable to start correctly (0xc000007b) ... " This is one stubborn problem :-( Yes. searching on Google shows that many had this problem from many reasons, in my opinion if it mining rig without important data, is much faste to have fresh install on win10 then debuging and waistin hours/days to fix this kind of problems, you should decide if this worth the effort. I'm having issues with this miner, I create the bat file and when I click on it the miner window appears and then disappears really fast. Enemy Miner works fine and so does CCminer. What do I need to do to fix this?
Try adding pause at the end of bat file, this will let you see. Can you share the bat file u are using? just hide the -u .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Eketubol
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 06:54:10 PM |
|
This is my bat file
coolMiner-x64.exe -a lyra2z -o stratum+tcp://eu1.protopool.net:4553 -u -p c=PYRO pause
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 07:13:53 PM |
|
Do you see the error now after adding pause? do you have drivers with cuda 9.2 support?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 10, 2018, 07:17:56 PM |
|
the static Vs var diff test has been neck and neck the entire time.
interesting stat at this point..
var diff has 1160 accepted shares static diff has 1906 accepted shares
and it's a been pretty much a tie, in coin production
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
Eketubol
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 07:20:58 PM |
|
It says that I don't have 9,2 support. I am on driver 390.77
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 10, 2018, 07:26:14 PM |
|
That the problem, you must update the drivers to use it.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
nsummy
|
|
June 10, 2018, 07:56:38 PM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe Ok tried this and no luck , its the same instant error message "The application was unable to start correctly (0xc000007b) ... " This is one stubborn problem :-( A good test would be to try running ccminer 2.2.5. Does that work or does it produce the same error? Also, does that happen if you double click the exe? or is it happening when you use a bat file? sounds like it could be a missing dll file. Try running command prompt as an admin and running this command: SFC /scannow
|
|
|
|
nsummy
|
|
June 10, 2018, 07:58:36 PM |
|
Ryzen, you are my hero. This gives about a 6% performance bump on my system, but more importantly, it hardly produces any heat!!!!!!! People bitching about dev fees are idiots. Lyra2z runs so hot on ccminer, this is a godsend. Thank you!
|
|
|
|
Shazza1977
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 10, 2018, 09:47:43 PM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe Ok tried this and no luck , its the same instant error message "The application was unable to start correctly (0xc000007b) ... " This is one stubborn problem :-( A good test would be to try running ccminer 2.2.5. Does that work or does it produce the same error? Also, does that happen if you double click the exe? or is it happening when you use a bat file? sounds like it could be a missing dll file. Try running command prompt as an admin and running this command: SFC /scannow ccminer 2.2.5 is fine and that's what i currently run. No error with that one. I tried the SFC /scannow and no errors. Re Ryzens2700x comment about the full reinstall i'm worried i do all that and it doesn't fix it. I've already lost 4 hrs trying to get this going now . So happy to try a few more things first for sure.
|
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 11, 2018, 12:23:44 AM Last edit: June 11, 2018, 11:57:18 AM by JackIT |
|
TEST 4: Head to Head test of CoolMiner 1.3 -i 20 Vs ccminer -i 18 The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Test Results: Coolminer wins by 6.65%Duration: 687 mins Sorry guys, this was originally supposed to be a coolminer 1.3 -i 18 Vs -i 20 test, but I choose the wrong miner in setting up awesome miner. .
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 11, 2018, 05:33:49 AM |
|
TEST 4: Head to Head test of CoolMiner 1.3 -i 20 Vs -i 18 The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Test Results: IN PROGRESS . In first link it’s ccminer ? Look at your worker, it’s showing ccminer And in second link it’s showing coolminer... Any way in second link with coolminer you have much coins Thank you for all good tests that you are sharing with us... Max
|
|
|
|
konqueror
Member
Offline
Activity: 99
Merit: 10
|
|
June 11, 2018, 08:21:13 AM |
|
Hi guys,
Is there a linux build 1.3 available?
|
|
|
|
CazeW
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 11, 2018, 11:50:51 AM |
|
Looking at the pages for test 3 while you were still mining, the vardiff was actually using ccminer and d=10 coolminer according to the pool (or the other way around, don't remember which). Didn't say anything as I was unsure if that was intentional.
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 11, 2018, 11:59:12 AM |
|
In first link it’s ccminer ? Look at your worker, it’s showing ccminer And in second link it’s showing coolminer... Any way in second link with coolminer you have much coins Thank you for all good tests that you are sharing with us... Max Thanks for catching that.. I usually double check everything before I launch a test, clearly I choose the wrong miner prog in Awesome Miner. I edited the test above, and I'm running a follow up test of what should have been.
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 11, 2018, 12:01:43 PM Last edit: June 11, 2018, 11:59:00 PM by JackIT |
|
TEST 5: Head to Head test of CoolMiner 1.3 -i 20 Vs -i 18 The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Test Results: -i 20 wins by 2.3% Duration 654 mins .
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 11, 2018, 12:24:55 PM |
|
TEST 5: Head to Head test of CoolMiner 1.3 -i 20 Vs -i 18 The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, +75 core, -502 mem Drivers: Nvidia 397.93 Test Results: IN PROGRESS . You are cool guy but now you are testing first version of the coolminer... Any way, the i 20 wins .... Thank you for sharing this info is very useful!!! Max Edit: Sorry, i cant see that you was testing the correct version coolminer-v1.3 Many thank’s !!! Max
|
|
|
|
vickigoh
Member
Offline
Activity: 151
Merit: 10
|
|
June 11, 2018, 01:20:04 PM |
|
I tried using the template bat.file...but not working..the mining window keep closing.
i use as follow:- coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com:20012 -u Gdb43xnQZGF5wMBRKD3YRhUvga8j5Aj554.Rig1 -p x -i 19 --hide-diff
and when i download the file inside only got "coolMiner-x64" application file that all.. am I missing anything??
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 11, 2018, 01:25:07 PM |
|
I tried using the template bat.file...but not working..the mining window keep closing.
i use as follow:- coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com:20012 -u Gdb43xnQZGF5wMBRKD3YRhUvga8j5Aj554.Rig1 -p x -i 19 --hide-diff
and when i download the file inside only got "coolMiner-x64" application file that all.. am I missing anything??
Are u upgraded your Nv driver above 390+ im using on one rig with 397.31 an another rig with 398.11 and no problem.
|
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
June 11, 2018, 01:50:39 PM |
|
So far coolminer has taken my rig from 18.9mhs (ccminer 2.2.5) to 20.25mhs. This miner is a winner.
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
nsummy
|
|
June 11, 2018, 05:23:23 PM |
|
Hi Guys, i'm getting an error on my mining rig when using coolminer, its "The application was unable to start correctly (0xc000007b) ... "
Its a windows 10x64 machine 8 gb ram , core i5 7400 , with 9 gpus , 6 x 1080ti, 3 x 1070ti.
Things i've tried, installing cuda 9.2 , installing latest nvidia drivers 398.11, checked vb.net version is 4.7 , ran as administrator , checked its not blocked in firewall . Tried 1.1, 1.2 , 1.3 version and no luck.
Any ideas ? works great on my desktop and love to get this working on my rig.
I'll send a Gincoin to anyone that can sort this out for me as a thankyou .
Try this: Go here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloadsdownload and install both: x86: vc_redist.x86.exe and x64: vc_redist.x64.exe Ok tried this and no luck , its the same instant error message "The application was unable to start correctly (0xc000007b) ... " This is one stubborn problem :-( A good test would be to try running ccminer 2.2.5. Does that work or does it produce the same error? Also, does that happen if you double click the exe? or is it happening when you use a bat file? sounds like it could be a missing dll file. Try running command prompt as an admin and running this command: SFC /scannow ccminer 2.2.5 is fine and that's what i currently run. No error with that one. I tried the SFC /scannow and no errors. Re Ryzens2700x comment about the full reinstall i'm worried i do all that and it doesn't fix it. I've already lost 4 hrs trying to get this going now . So happy to try a few more things first for sure. ccminer comes packaged with a dll file if I remember correctly. Copy the coolminer exe into the same folder as your ccminer and try running it from there. A full re-install sounds a little overboard at this point. Also are you familiar at all with the windows event viewer? In the application logs there should be an entry for every time this failed to run.
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
June 11, 2018, 07:06:28 PM |
|
I tried using the template bat.file...but not working..the mining window keep closing.
i use as follow:- coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com:20012 -u Gdb43xnQZGF5wMBRKD3YRhUvga8j5Aj554.Rig1 -p x -i 19 --hide-diff
and when i download the file inside only got "coolMiner-x64" application file that all.. am I missing anything??
Are u upgraded your Nv driver above 390+ im using on one rig with 397.31 an another rig with 398.11 and no problem. I tried to run coolminer in 391.24 and the miner doesn't start because it miss CUDA 9.2. Cuda 9.2 is included (as far I know) in 397.xx drivers. And I've had freeze issues with 397.xx drivers (various versions) + Windows 10 LTSB + Afterburner or any monitoring/overclocking app Do you are able to run Coolminer in 391.xx drivers? How did you made it to work? Sorry my really bad english.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 11, 2018, 07:16:02 PM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
June 11, 2018, 07:22:34 PM |
|
Nope, I'll try now. Thanks, Ryzen2700x (I'm planning to buy your brother, R7 2700 )
|
|
|
|
oxygensignature0
Newbie
Offline
Activity: 67
Merit: 0
|
|
June 11, 2018, 08:39:21 PM |
|
Hello guys, a linux version exist? i'm using HiveOS but i suppose that at moment isn't CUDA 9.2 capables
|
|
|
|
notblox1
Legendary
Offline
Activity: 2058
Merit: 1264
Logo Designer ⛨ BSFL Division1
|
|
June 12, 2018, 01:20:41 AM |
|
Same thing is happening to me also. Window just closes, and it can start mining at all.
Drivers are 390 + Cuda 9
I also woinder did you compared it with new cc miner 2.2.6 and new CryptoDrege miner ?
|
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
|
June 12, 2018, 01:37:43 AM Last edit: June 12, 2018, 02:07:17 AM by mirny |
|
Hello guys, a linux version exist? i'm using HiveOS but i suppose that at moment isn't CUDA 9.2 capables I have Cuda 9.2 installed, but I'm getting: Illegal instruction (core dumped) Using your latest compiled binary.
|
This is my signature...
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 12, 2018, 04:59:13 AM |
|
About linux, I am noob in linux but you can ask him, He was able to run my miner on Linux: https://bitcointalk.org/index.php?topic=4412370.msg39571767#msg39571767The is also link to coolMiner-v1.2L. I tried to compile the v1.3L but now I can't compile anything because it just started throwing error "all-recursive" on line ~2550 on makefile, have no idea why, I changed nothing.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
MrTDHP
Newbie
Offline
Activity: 64
Merit: 0
|
|
June 12, 2018, 06:08:56 AM |
|
How do I display the ping time like in your screenshots?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 12, 2018, 06:31:18 AM |
|
It was only in first version that was based on brian112358@github fork, I can try adding it later to the current tpruvot@github 2.2.6 fork.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Orphzin
Jr. Member
Offline
Activity: 66
Merit: 2
|
|
June 12, 2018, 06:53:03 AM |
|
|
|
|
|
platinum4
|
|
June 12, 2018, 07:28:47 AM |
|
This performs slightly better than nanashi-mod ccminer 2.2 on -i 21 but adds 1% fee, it seems to squeeze more out of 1060s but not more out of 1070s. I'm impressed though I will drop nanashi-mod if it holds.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 12, 2018, 07:41:08 AM Last edit: June 12, 2018, 08:58:13 AM by Ryzen2700x |
|
What driver version you are using? my miner should be min 5% better, for comparison 1070 @ 2025Mhz should give you 1950Kh/s, on 1080TI on stock (1987Mhz)I get 3350Khs on ccminer 2.2.5 vs 3550+ on coolMiner. P.S- I think the 1070Ti is the main winner here, 1080 performance level with lower power, I think it's the best GPU for price/performance/multi use(ETH+GPU intensive algos) for Lyra2z.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
CazeW
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 12, 2018, 09:53:25 AM |
|
Same thing is happening to me also. Window just closes, and it can start mining at all.
Drivers are 390 + Cuda 9
I also woinder did you compared it with new cc miner 2.2.6 and new CryptoDrege miner ?
Update your drivers, they need to be 397+.
|
|
|
|
Saphire
|
|
June 12, 2018, 12:42:16 PM |
|
Shit Miner 398.11 driver installed. The same ERROR after 5-10 minus mining for my GTX 1080Ti and GTX 1070 Rigs.
|
|
|
|
MCat$
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 12, 2018, 01:14:55 PM |
|
Hi dev! Why did you remove the solo in 1.3? I did not get the block in version 1.1. Takes a developer's board in solo. Strangely switches it to another solo. I do not think I can see the block as my ears. Miner is crude. The gain is small. ! My choice ccminer 2.2.6 !
Good luck to you ! Maybe you can do something great.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3136
Merit: 1003
|
|
June 12, 2018, 02:21:43 PM |
|
What about SM_50 ?
|
|
|
|
nanofoxice
Member
Offline
Activity: 307
Merit: 12
|
|
June 12, 2018, 04:45:06 PM |
|
Very fast miner, great work!
|
|
|
|
MrTDHP
Newbie
Offline
Activity: 64
Merit: 0
|
|
June 12, 2018, 06:16:56 PM |
|
Can you also make the miner quit instead of spewing "unspecified launch failure"s in the case a gpu crashes?
|
|
|
|
dkbit98
Legendary
Offline
Activity: 2226
Merit: 7147
|
|
June 12, 2018, 11:36:44 PM |
|
This performs slightly better than nanashi-mod ccminer 2.2 on -i 21 but adds 1% fee, it seems to squeeze more out of 1060s but not more out of 1070s. I'm impressed though I will drop nanashi-mod if it holds.
Do you have link for this nanashi-mod miner ? Is it only for Lyra2z algo or multi-algo ?
|
. .HUGE. | | | | | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . CASINO & SPORTSBOOK ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | |
|
|
|
nsummy
|
|
June 13, 2018, 06:44:29 AM |
|
This performs slightly better than nanashi-mod ccminer 2.2 on -i 21 but adds 1% fee, it seems to squeeze more out of 1060s but not more out of 1070s. I'm impressed though I will drop nanashi-mod if it holds.
Do you have link for this nanashi-mod miner ? Is it only for Lyra2z algo or multi-algo ? https://github.com/Nanashi-Meiyo-Meijin/ccminer_v2.2_mod_r2/releases/tag/v2.2-mod-r2I actually thought it was only designed for the lyra2v2 algo. Didn't realize people used it for lyra2z
|
|
|
|
StopTheNewWorldOrder
Newbie
Offline
Activity: 25
Merit: 0
|
|
June 13, 2018, 08:59:29 PM |
|
How does this compare to MPH's proprietary zFastminer on ZXC? Anyone try it and compare pool-side hashrates yet? Want to try this out myself in the next day or 2 when I have a bit of free time.
|
|
|
|
Pantostao
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 13, 2018, 09:36:02 PM |
|
Any updates?? there is an AMD miner for Lyra2z that does 3.5MH on a rx580 and 6MH on vega 64...
|
|
|
|
papacheal
Newbie
Offline
Activity: 67
Merit: 0
|
|
June 13, 2018, 11:38:13 PM |
|
FYI, comparing tpruvot 2.2.6 to coolMiner 1.3 on TITAN-V card, no OC, Win 10 latest build with 398.11 drivers on multi-hour, static diff mining session, -i 19:
tpruvot 2.26 = 7.27 MH/s coolMiner 1.3 = 7.41 MH/s
+1.9% difference, so still worth it with dev fee included.
|
|
|
|
notblox1
Legendary
Offline
Activity: 2058
Merit: 1264
Logo Designer ⛨ BSFL Division1
|
|
June 14, 2018, 12:47:18 AM |
|
I am testing all this miners now. Summer started...and Lyra2z also started.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 14, 2018, 04:03:42 AM Last edit: June 14, 2018, 04:16:22 AM by Ryzen2700x |
|
FYI, comparing tpruvot 2.2.6 to coolMiner 1.3 on TITAN-V card, no OC, Win 10 latest build with 398.11 drivers on multi-hour, static diff mining session, -i 19:
tpruvot 2.26 = 7.27 MH/s coolMiner 1.3 = 7.41 MH/s
+1.9% difference, so still worth it with dev fee included.
Thank you for the info, Try increasing the intensity a little(19.75/20.75), it's little low for Volta, should get you more coins. I wish I had this card for "testing" :-). I am testing all this miners now. Summer started...and Lyra2z also started. Yep :-), I take care of my baby GPU's, no way I gonna mine 300W+ algos on them, Ethash/CryptoNight/Lyra2z are the only algos I mined.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 14, 2018, 04:18:19 AM |
|
Any updates?? there is an AMD miner for Lyra2z that does 3.5MH on a rx580 and 6MH on vega 64...
tdx miner linux only
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
bitcoinminer0319
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 14, 2018, 03:13:31 PM |
|
i got illegal memory encounter. what does it mean? i tried to oc all gpu
2x1050ti 1x1060 GB 1x1070ti 1x1070 1x1080ti
|
|
|
|
beubliss
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 14, 2018, 05:58:15 PM |
|
Hi, I have 900 x 1080ti and I tried all the linux version of the miner in this thread and all would give me "illegal instruction" when I run them. I's using HiveOS and cude 9.2 is installed. Could you please contact me on Discord ? This would be very appreciated. Juanpwnsya #6808 Thanks Dear Miners :-),I would like to share with you my modified version of ccminer 2.2.5 with improved lyra2z kernels, I see that there is many new coins for this algo and since the hot summer is near there is no better "Eco" algo like lyra2z. So I called it the -"coolMiner" :-). This miner should have all ccminer options and you can use it on any pool or lyra2z coin u like - no limits!.Please use the latest nVidia drivers to get the full speed from the miner! Update: coolMiner-v1.3 !Applied the suggested fix by JackIT to "Fix slow start in multi gpu-rigs". Download-New Link: Nofile.io: https://nofile.io/f/cxRVoY5kRT3/coolMiner-x64-v1-3.zipFile.fm: https://file.fm/f/q7fkdz3zSENDfiles: http://www.sendfiles.net/?uid=b7b1-73a3a1b5Password: yTYvRzaI Important Update: Please Update to coolMiner-v1.2!Now it based on latest ccminer by tpruvot@github instead of brian112358@github fork, This should solve the miner crash issue. Please be noted, NiceHash EU servers are not 100% stable and sometimes can't get work!, use USA server instead. Download:https://nofile.io/f/NCE6dK2q5c7/coolMiner-x64-v1-2.ziphttps://file.fm/f/meham7f6 Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds". The new v1.1 version will mine on Angrypool when switching to Dev Pool Dudes pool on the Fee time. Also the CYCLE_TIME between pool changes increase like you asked. Please let me know if there is any more problems.
Download: New Version V1.1 - Now supports "-p stats" to submit your results to yiimp pools :-) : https://nofile.io/f/wFpqPs0MB9v/coolMiner-x64-v1-1.zip
.bat file for reference:coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com:<PORT> -u <WALLET_ADDRESS> -p <OPTIONS> -i 19 --hide-diff coolMiner Specs:- Compiled with Cuda9.2, 64-bit.
- Compiled for nVidia Gpu's with SM_52/SM_61/SM_70 (Maxwell-Pascal-Volta).
- Max-GPU support increased to 20!.
- Stale share bug fixed.
- Lyra2z miner only.
Benchmark resaults:1080Ti - 3,750KH/s @2075Mhz core. 1070TI - 2,400KH/s @1987Mhz core (2,500 KH/s+ should be no problem with better OC). 1070 - 1,950KH/s @2025Mhz core (2,000 KH/s+ should be no problem with better OC). ScreenShots:1080Ti: https://s15.postimg.cc/qaucpnlcb/cool_MIner-1080_Ti.jpg1070 and 1070Ti: https://s15.postimg.cc/brn7o8521/cool_MIner-1070_1070_Ti.jpg I only got those cards, I would like you to share your resaults on other cards too :-).Cool Tip to save power!:You can Limit the max Core voltage of the GPU with MSI afterburner by pressing: "ctrl+f" and then you will see new window with your cards Frequency/Voltage graph: https://s15.postimg.cc/d6osd2vwb/MSIAB_ctrl-f.jpgThen you can click on the graph on the desired voltage and click "ctrl-l" and then the apply button on the MSI afterburner: https://s15.postimg.cc/s2nbkof0r/MSIAB_ctrl-_L.jpgThen you will see the Core voltage drops and this way you can drop the power usage: https://s15.postimg.cc/nymcrxizv/MSIAB_ctrl-_L-950m_V.jpgYou can play with it and adjust the core clock and achieve the max clock/voltage for better efficiency- do it with small steps so you will not crash the display driver :-) I hope you will support and accept the 1% dev fee- let's call it "dude fee" , I prefer to support the community and not just sell it to "Big-Farms" ;-).Download:New Version V1.1: https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zipThe Linux build made by installing fresh ubuntu :http://releases.ubuntu.com/16.04/Folowing this tutorial: https://www.youtube.com/watch?v=XdWr9pB5p_QAnd using those dependencies: https://github.com/KlausT/ccminer/wiki/How-to-create-binaries-under-Ubuntu-LinuxI have tested it on single 1080Ti and it worked, so please test it and confirm that it works for you too(I am new to Linux sry).
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 14, 2018, 06:44:22 PM |
|
What hashrate did you see for 1080ti on linux?
|
|
|
|
somaton
Jr. Member
Offline
Activity: 204
Merit: 5
|
|
June 14, 2018, 07:30:01 PM |
|
Thats why i asked for cuda 9.1 version, too much problems with cuda 9.2. I'm not interested in small bumps in speed for one algo - reliability is more important for me. Developer said no.
|
|
|
|
AIOMiner
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 15, 2018, 01:17:25 AM Last edit: June 15, 2018, 02:31:33 PM by AIOMiner |
|
GINcoin Mining POOL - AIOMiner Poolhttps://pool.aiominer.com - 0% Pool Fees * No registration required for pool.* * Server is located in US*⤧ 0% Fees ⤧ Community Driven ⤧ Most Profitable Coins Only!Example of mining with GIN address: coolMiner-x64 -a lyra2z -o stratum+tcp://pool.aiominer.com:4553 -u GINWALLET.ME -p c=GIN -R 10 Welcome all and happy mining!
|
|
|
|
mrstark89
Newbie
Offline
Activity: 284
Merit: 0
|
|
June 15, 2018, 03:46:16 AM |
|
I got 1100-1150 kH/s with GTX1060-3G Hynix memory. Is that OK ?
|
|
|
|
Ragnarokt
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 15, 2018, 07:32:39 AM |
|
Hi,
I have 900 x 1080ti and I tried all the linux version of the miner in this thread and all would give me "illegal instruction" when I run them. I's using HiveOS and cude 9.2 is installed.
Could you please contact me on Discord ? This would be very appreciated.
Juanpwnsya #6808
Thanks
This miner is not working on Linux. I have tried it many times on HiveOS with different combinations CUDA
|
|
|
|
egyptianbman
Full Member
Offline
Activity: 216
Merit: 100
https://equipool.1ds.us
|
|
June 15, 2018, 06:01:58 PM |
|
This miner sorely needs better Linux support. You should package dependencies in your executable or use an older, more stable dependency so it works for more people without issue.
|
|
|
|
mo35
Member
Offline
Activity: 142
Merit: 10
|
|
June 15, 2018, 06:32:31 PM |
|
Thats why i asked for cuda 9.1 version, too much problems with cuda 9.2. I'm not interested in small bumps in speed for one algo - reliability is more important for me. Developer said no.
+1 drivers with 9.2 cuda causing problems , can we get cuda 9.1 version so we can use more stable drivers.
|
|
|
|
ironkid
Newbie
Offline
Activity: 59
Merit: 0
|
|
June 15, 2018, 11:50:09 PM |
|
Damn man Titan V is really good. I have 2x 1080ti and 1x 1070 and consume like 400+ watts while doing 9mh total speed.
|
|
|
|
platinum4
|
|
June 16, 2018, 05:11:24 AM |
|
What driver version you are using? my miner should be min 5% better, for comparison 1070 @ 2025Mhz should give you 1950Kh/s, on 1080TI on stock (1987Mhz)I get 3350Khs on ccminer 2.2.5 vs 3550+ on coolMiner. P.S- I think the 1070Ti is the main winner here, 1080 performance level with lower power, I think it's the best GPU for price/performance/multi use(ETH+GPU intensive algos) for Lyra2z.
398.18, and it was actually 1-10% better performance; the 1060s benefit from this.
|
|
|
|
mintminty590
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 16, 2018, 10:42:51 AM |
|
Still no simple linux support, I am not downloading windows to run this , DEV please do a linux version and make it clear
|
|
|
|
oxygensignature0
Newbie
Offline
Activity: 67
Merit: 0
|
|
June 16, 2018, 01:42:14 PM |
|
any chance to have a cuda 9.1 version avaiable?
|
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
June 16, 2018, 03:12:00 PM |
|
Where is the -help file for coolminer v1.3? I cannot set the stratum difficulty in the command line using any known commands. Pool always reverts to 1 as a starting point!
-p c=(coin),d=(difficulty) should do it but it doesn't. Also tried --diff (difficulty) and it doesn't work either.
Mining on BSOD (yiimp pool). Any help here?
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
June 16, 2018, 03:19:51 PM |
|
Where is the -help file for coolminer v1.3? I cannot set the stratum difficulty in the command line using any known commands. Pool always reverts to 1 as a starting point!
-p c=(coin),d=(difficulty) should do it but it doesn't. Also tried --diff (difficulty) and it doesn't work either.
Mining on BSOD (yiimp pool). Any help here?
No problem with static difficulty on angrypool, I don’t know why on bsod you can’t set it ...
|
|
|
|
barroso1994
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 16, 2018, 05:41:48 PM |
|
Has some miner Lyra2REv2H to " AMD GPU" for use in windows?
|
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 18, 2018, 08:35:14 AM |
|
After 10 days running with Coolminer 1.3 the stats:
Windows 10 Pro 1803 - 398.11 NV driver
2x1070 MSI Armor 1x 1080 Gigabyte 1080 Aurus 3x 1080Ti Inno3d Ichill x4 Overall average: 16,273MH/s with average 717W power consumption at the wall, and 0,3-1% stale share on intensiti 19.
|
|
|
|
slysir
Newbie
Offline
Activity: 51
Merit: 0
|
|
June 18, 2018, 12:17:00 PM Last edit: June 18, 2018, 12:34:27 PM by slysir |
|
How to remove the error popup window with "nvml.dll error". I have to click on it to start the miner.
OK did a fresh install to fix it.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 18, 2018, 12:33:46 PM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
bitcoinminer0319
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 18, 2018, 12:36:15 PM |
|
what is intensity for 1080ti?
i tried 16 and it is pretty slow mining.
|
|
|
|
bitcoinminer0319
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 18, 2018, 12:40:02 PM |
|
i also got rejected share when i start mining.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 18, 2018, 12:47:47 PM |
|
-i < 19 will give slower hash-rate, Regarding rejected shares- if the reason is "job not found" this is because new block found and the share for the previous block is rejected.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ghosting
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 18, 2018, 04:21:40 PM |
|
hello i can help you with the linux trouble you are running in. You can contact me on discord Ghosting#4631 or by email at motis@mineum.org
|
|
|
|
JackIT
Jr. Member
Offline
Activity: 99
Merit: 8
|
|
June 19, 2018, 12:51:21 AM Last edit: June 19, 2018, 10:37:06 AM by JackIT |
|
Lyra2z - Head to Head test of CoolMiner 1.3 Vs CryptoDredge 0.4.1
Hash rate numbers are vanity metrics and can be gamed. The only thing I care about is " which miner puts more coins in my wallet?" I've done dozens of Head to Head tests in the past see: https://bitcointalk.org/index.php?topic=3385643.0I've decided to test CoolMiner 1.3 Vs CryptoDredge 0.4.1 to see which one mines more coins on Lyra2z. MINERS:CoolMiner 1.3 intensity = 20 CryptoDredge 0.4.1 intensity = 6 The Setup:I use a 12 GPU 1080Ti rig on Windows 10, split into three mining instances of 4 GPU's each (for this test, only two of the instances are used). All three mining instances are balanced to get as close to the same hash rate as possible. Each mining instance is running at the same time on the same machine mining on the same pool. Overclock settings: 100% TDP, NO overclocking Drivers: Nvidia 398.11 Test 1 Results: Test aborted about 4 hours into the test, the rig crashed. I'm confident that it was due to CryptoDredge, the rig had close to two weeks of uptime running Coolminer. When I went to restart CryptoDredge, I got the following error: > Error: bad lexical cast: source type value could not be interpreted as targetGiven the increased temps, increased power draw, and stability issues; I cannot recommend CryptoDredge, even if it does provide a few percentage point gain over Coolminer. I'll wait until CryptoDredge has the bugs worked out to give it another try
Notes on CryptoDredge: - GPU's run about 6-8 degrees Celcius hotter than with coolminer
- The GPU count starts at 0, whereas ccminer variants start the count at 1. this obviously makes a difference when using the -d flag
- Intensity ranges from 0 to 6, 1080Ti defaults to a 6
- I initially had issues with stability. The miner would crash the rig after a minute or two of running. I had 397 drivers on the rig, which I knew caused issues for some miners. So I DDU'd the rig, installed 398 drivers, and didn't overclock... that seemed to clear up the problem.
- No API support
|
X16R - RVN - Miner head to head test log (https://bitcointalk.org/index.php?topic=3385643)
|
|
|
takasungi
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 19, 2018, 04:33:28 AM |
|
where to download 1.3 linux version? thx
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
June 19, 2018, 04:45:38 AM |
|
Can you tell the difference in power draw between coolminer and cryptodredge? Killawatt maybe?
|
|
|
|
pileto3
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 19, 2018, 04:56:35 AM |
|
I have 6.5% above Cool Miner in Hash and 35% in power from the wall! Also the temperatures raises...
|
|
|
|
Boba_Fett
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 19, 2018, 08:04:44 AM |
|
Good perfs but unstable miner
My rig reboots after few hours (tested with 32 and 64 bits versions)
No problems with ccminer tpruvot
|
|
|
|
kwchmining
Jr. Member
Offline
Activity: 34
Merit: 1
|
|
June 19, 2018, 10:43:19 AM |
|
I ran some benchmarks comparing CoolMiner v1.3 to CryptoDredge 0.4.1
Seems CoolMiner does in fact run cooler, so given the API functionality, although just a tad slower - seems to be the optimal choice overall.
Lyra2z Benchmarks
Rig33 (0 CC | 0 MC)
CoolMiner v1.3 After 60+ Mins~
GPU 0 - 3,341.94 kh/s (Gigabyte GTX 1080 Ti) GPU 1 - 3,304.69 kh/s (Gigabyte GTX 1080 Ti) GPU 2 - 3,338.17 kh/s (Gigabyte GTX 1080 Ti) GPU 3 - 2,393.57 kh/s (MSI GTX 1080) GPU 4 - 2,426.58 kh/s (Gigabyte GTX 1080) GPU 5 - 2,526.84 kh/s (EVGA GTX 1080) Total Hash = 17.33 MH/s
CryptoDredge v0.4.1 After 60+ Mins~
GPU 0 - 3,386 kh/s (Gigabyte GTX 1080 Ti) GPU 1 - 3,412 kh/s (Gigabyte GTX 1080 Ti) GPU 2 - 3,179 kh/s (Gigabyte GTX 1080 Ti) GPU 3 - 2,514 kh/s (MSI GTX 1080) GPU 4 - 2,560 kh/s (Gigabyte GTX 1080) GPU 5 - 2,707 kh/s (EVGA GTX 1080) Total Hash = 17.90 MH/s
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 19, 2018, 10:59:04 AM Last edit: June 19, 2018, 11:35:53 AM by Ryzen2700x |
|
Thanks, I hope to see better miners coming out for us without paying X.XXBTC. If CryptoDredge uses ~35% power then ccminer/coolMiner than it need's to be over 10% faster to pay for the extra electricity. Now when I think about FPGA .... , Hard times to be a GPU miner... P.S: Found solution to the error: stuck in a loop "retry after 5 seconds". when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 19, 2018, 08:25:02 PM |
|
Update: coolMiner-v1.4!* Found solution to the error: stuck in a loop "retry after 5 seconds"- when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it. * Default intensity set to 18 Download:File.fm:64Bit: https://file.fm/f/2bts6tmmNofile.io:64Bit: https://nofile.io/f/05Cn5WVBRGF/coolMiner-x64-v1-4.zipSENDfiles:64Bit: http://www.sendfiles.net/?uid=6d0d2-667692b5Password: NdMmj7So More download links later. Hope this helps now, Thanks for your support .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Sikkan666
Member
Offline
Activity: 239
Merit: 11
|
|
June 19, 2018, 08:35:21 PM |
|
no boost in speeds in the latest ver I suppose other than bugfixes?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 19, 2018, 08:38:26 PM |
|
Unfortunately no , But this bug "retry after 5 seconds" was very serious, the miner could be stuck this way for hours without mining, so I thinks it's better then small speed improvement .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Star65
Member
Offline
Activity: 109
Merit: 13
|
|
June 19, 2018, 09:46:29 PM |
|
Thanks, I hope to see better miners coming out for us without paying X.XXBTC. If CryptoDredge uses ~35% power then ccminer/coolMiner than it need's to be over 10% faster to pay for the extra electricity. Now when I think about FPGA .... , Hard times to be a GPU miner... P.S: Found solution to the error: stuck in a loop "retry after 5 seconds". when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it.Thanks bro! FPGA is a really bad thing for us.
|
|
|
|
EmTee
Newbie
Offline
Activity: 14
Merit: 1
|
|
June 20, 2018, 04:00:15 AM |
|
Regarding Linux- I asked for help bit got none , If you know how to edit the compile options so the binary could be shared and work on multiple systems- I will be happy to try and recompile, the Default build scripts on ccminer only works on the compiler PC, so I need help to modify them so you could also run it, Thanks in Advance!. Please check the build.sh script or modify your ./configure flags to remove '-march=native' and it should compile a universal binary.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 20, 2018, 09:30:26 AM |
|
Thank you for your Help, I just did as you sugested, also I have included the "libcudart.so.9.2" files that I had + text file with their path on my PC if it helps. Download coolMiner-v1.4L for Linux:File.fm:64Bit: https://file.fm/f/6y36v6vmPlease let me know it it works, It requires nVidia driver 396 to be installed(for Cuda9.2).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Sikkan666
Member
Offline
Activity: 239
Merit: 11
|
|
June 20, 2018, 11:06:45 AM |
|
Unfortunately no , But this bug "retry after 5 seconds" was very serious, the miner could be stuck this way for hours without mining, so I thinks it's better then small speed improvement . absolutely Ive never had such error or bug so I´ll update later unless it starts to happen to my rigs
|
|
|
|
|
EmTee
Newbie
Offline
Activity: 14
Merit: 1
|
|
June 20, 2018, 03:22:10 PM |
|
Working quite well on a celeron g3900 system now. Thank you. Thank you for your Help, I just did as you sugested, also I have included the "libcudart.so.9.2" files that I had + text file with their path on my PC if it helps. Download coolMiner-v1.4L for Linux:File.fm:64Bit: https://file.fm/f/6y36v6vmPlease let me know it it works, It requires nVidia driver 396 to be installed(for Cuda9.2).
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 20, 2018, 03:43:11 PM Last edit: June 20, 2018, 05:29:35 PM by Ryzen2700x |
|
Thanks for @zcoinofficial for recommending on coolMiner- You Are Cool! (+Thanks for the great Eco algo!)Working quite well on a celeron g3900 system now. Thank you. Thank you for your Help, I just did as you sugested, also I have included the "libcudart.so.9.2" files that I had + text file with their path on my PC if it helps. Download coolMiner-v1.4L for Linux:File.fm:64Bit: https://file.fm/f/6y36v6vmPlease let me know it it works, It requires nVidia driver 396 to be installed(for Cuda9.2).OMG- Thanks- you made me very happy :-), so finally it working lol . Now I will add more download links, thank you for your help!. Also use "-q --hide-diff "to reduce the CPU usage on weak CPU's . cool project - Thank you :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Shad1
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 20, 2018, 05:15:33 PM |
|
Please tell the optimal settings for GTX1080
|
|
|
|
beubliss
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 20, 2018, 05:32:48 PM |
|
Thanks Ryzen for the latest linux version, it works fine.
|
|
|
|
31lakshan
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 20, 2018, 05:52:11 PM |
|
Can i get a profit?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 20, 2018, 06:47:39 PM |
|
Please tell the optimal settings for GTX1080
what do you mean? OC/Power/ or intensity? -i 20 should be OK, and regarding OC you should know your safe max Core turbo clock, 1070/1080ti should be fine ~1900Mhz+, on 2000Mhz+ you must test individually each GPU because some can be stable and some can crush after few min/hours/days Thanks Ryzen for the latest linux version, it works fine.
Happy to help :-).
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ironkid
Newbie
Offline
Activity: 59
Merit: 0
|
|
June 20, 2018, 08:36:43 PM |
|
Hey man your miner was working flawlessly for me but after downloading v1.4 every once a while when I have a connection issue with the pool the miner stops and doesnt try to restore connection and mine again. Should I add anything in the bat file to force retry or something? Edit: Thank you
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 20, 2018, 08:44:37 PM |
|
create .bat file like this: :start coolMiner-x64 -a lyra2z -o stratum+tcp://<PoolURL>:<PORT> -u <WALLET_ADDRESS> -p <OPTIONS> -i 19 --hide-diff -q goto start
But if v1.3 worked stable for you you can keep using it, speed is the same.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Shad1
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 21, 2018, 06:06:36 AM |
|
Please tell the optimal settings for GTX1080
what do you mean? OC/Power/ or intensity? -i 20 should be OK, and regarding OC you should know your safe max Core turbo clock, 1070/1080ti should be fine ~1900Mhz+, on 2000Mhz+ you must test individually each GPU because some can be stable and some can crush after few min/hours/days Thanks, now I have ~ 2.4 Mhs from one 1080 Aorus. I want to make a fine-tuning with msi afteberner curve to get a maximum performance at minimum temperature and also want to understand what the memory or chip frequency affects the performance. What the optimal voltage for my 1080 on this algo?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 21, 2018, 06:15:26 AM |
|
you can look at the user's benchmarks: https://gos.cx/bench?algo=lyra2z&chip=5https://angrypool.com/bench?algo=lyra2z&chip=3Try to stabilize it around 2000~2050MHZ, memory OC has no affect, and the core voltage on card are jumping to 1050mV on stock, I only need to raise the core voltage when going over 2025Mhz.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Shad1
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 21, 2018, 06:43:23 AM |
|
|
|
|
|
un4given
|
|
June 21, 2018, 06:55:06 AM Last edit: June 21, 2018, 08:56:26 AM by un4given |
|
really COOLminer though it crashes at all my rigs. need to play with OC to get it stable. speed reached as described in the thread. Edit: couldnt get the miner stable. it crashes on all rigs. switched back to ccminer 2.2.6
|
|
|
|
Shad1
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 21, 2018, 07:52:17 AM |
|
Where can I read the readme for this miner with all commands to configure my bat file?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 21, 2018, 07:59:18 AM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Shad1
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 21, 2018, 08:44:31 AM |
|
Thanks again. CoolMiner the best!
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 21, 2018, 12:35:53 PM |
|
Tried the 1.4 too, but i have the same problem with it, after 30-60 min miner exits and not restart, going back to 1.3
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
June 21, 2018, 04:34:38 PM |
|
back to 1.3 too... too many disconnection and miner restart
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 21, 2018, 05:10:03 PM |
|
back to 1.3 too... too many disconnection and miner restart
Tried the 1.4 too, but i have the same problem with it, after 30-60 min miner exits and not restart, going back to 1.3
I see, indeed there is something wrong when using more then 1 pool, I am still figuring it out, just saw this too: https://bitcointalk.org/index.php?topic=770064.msg40580515#msg40580515So if V1.3 works stable for you keep using it. I will continiue searching for better solution and update the thread when I find one.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
hogwash.89m
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 21, 2018, 10:20:11 PM |
|
Also v1.4 is crashing randomly between 30-60 minutes with some message "terminating mining threadio...". reverting to v1.3 which is working stable for days (for my setup+pool). I always make .bat file with restart loop, and this was saving my rig, but slowdowns due to miner restart are hurting profit. Example of .bat file, do not mind intensity settings, i got one 1080ti rest are 1080. @echo off title GIN lyra2z angrypool.com (coolMiner-x64 1.3 Ryzen2700x) :start coolMiner-x64 -a lyra2z -i 20,19.5,19.5,19.5,19.5,19.5 -o stratum+tcp://<POOL>:<PORT> -u <WALLET_ADDRESS> -p c=<COIN> -R 10 timeout 10 goto start
|
|
|
|
kantoi
Newbie
Offline
Activity: 84
Merit: 0
|
|
June 21, 2018, 10:47:32 PM |
|
back to 1.3 too... too many disconnection and miner restart
yes same for me - version 1.3 is stable and works well
|
|
|
|
vitos_i
Newbie
Offline
Activity: 34
Merit: 0
|
|
June 22, 2018, 04:55:24 AM |
|
returned to version 1.3, it is more stable
|
|
|
|
infPICO
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 22, 2018, 06:38:05 AM |
|
I can confirm crashing all the time after short time with "terminating working thread" message.
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
June 22, 2018, 07:02:01 AM |
|
So, --hide-diff -q is necessary or not?
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 22, 2018, 07:29:51 AM |
|
Thanks for the feedback on the V1.4, I will try to figure it , at least in not stuck in a loop of "retry after" and now exits, I hope to fix if soon, sry for that but it looks like ccminer not working very stable with 2 pools as mentioned above.
Regarding hide-diff and -q, it's just saves unneeded processes(CPU load) of calculation the diff of share and displaying log per GPU, this is why I made the -q to work after 180 sec so you could start mining and see the stats that all GPU's working OK and then it will enter the Quiet mode.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
ylpkm2
Newbie
Offline
Activity: 39
Merit: 0
|
|
June 22, 2018, 09:23:16 PM |
|
Thanks for the feedback on the V1.4, I will try to figure it , at least in not stuck in a loop of "retry after" and now exits, I hope to fix if soon, sry for that but it looks like ccminer not working very stable with 2 pools as mentioned above.
Regarding hide-diff and -q, it's just saves unneeded processes(CPU load) of calculation the diff of share and displaying log per GPU, this is why I made the -q to work after 180 sec so you could start mining and see the stats that all GPU's working OK and then it will enter the Quiet mode.
I can't say anything on stability for 1.3 vs 1.4, but on 1.4 it is really finicky when it decides to crash. Spent too much time trying to push the max clocks on cards and it seems stable for an hour but then crashes later. The terminating workio threads for me was a pool issue, for either 1.3 or 1.4.
|
|
|
|
valentoz
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 23, 2018, 03:16:39 PM |
|
Hello dear friend! You are very good at making a miner! Your miner works much better than everyone else! Can you work on the new EWBF-ZHASH miner? I think a lot of people would really appreciate it.
|
|
|
|
Miner2525
|
|
June 24, 2018, 08:14:38 PM |
|
I would like to share with you my modified version of ccminer 2.2.5 with improved lyra2z kernels, I see that there is many new coins for this algo and since the hot summer is near there is no better "Eco" algo like lyra2z. So I called it the -"coolMiner" :-). Is there any speed enhancement for Lyra2zV2 or is that a completely different algorithm?
|
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
|
June 24, 2018, 10:08:59 PM |
|
I finally upgraded my development system to the new Cuda SDK 9.2 compatible drivers so I could add support for your miner to my algorithm-switching software Hash Auger. CoolMiner 1.3 seems very stable. Several users are reporting a significant decrease in power consumption versus other Lyra2z miners while still having great hash rates. Good work!
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 24, 2018, 10:20:04 PM |
|
Thank you, keep the good work you are doing .
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
RIF86
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 25, 2018, 08:14:28 AM |
|
Add speed from 4000mh/s for 1080 ti !
|
|
|
|
soothaa
|
|
June 25, 2018, 11:15:45 AM |
|
Loving this very much. Keeps the cards running cool and quiet in the summer!
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 25, 2018, 01:55:25 PM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
rottongg
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 25, 2018, 02:06:14 PM |
|
Add speed from 4000mh/s for 1080 ti !
How did you get this speed ? What is your system and settings ? I use cool miner 1.3 (win 10 x64) and have 3700-3750 maximum for 1080 ti
|
|
|
|
bcn2048
Newbie
Offline
Activity: 104
Merit: 0
|
|
June 25, 2018, 06:04:30 PM |
|
greetings to all,
my simple rig consists of gtx1070, gtx980 and gtx970, i made a test on default settings for all cards,
with tpruvot ccminer x64 2.2.6 cuda9 it reached around 3800 khs, but with coolMiner-v1.3 it is much better - around 4420 khs !
|
|
|
|
oup59
|
|
June 25, 2018, 06:24:53 PM |
|
Add speed from 4000mh/s for 1080 ti !
Himm sounds like a private miner fork of an open source miner for just 0.05BTC or a very optimized miner for Linux Vega 64 makes around 7000 mh/s anyway, they say.
|
|
|
|
SimpleM
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 25, 2018, 09:31:39 PM |
|
Thanks for your efforts, can you please compile it with Cuda 9.1 libraries? We're on hiveos and cannot use your miner yet. I get this error: Your system does not support CUDA 9.2 API!
|
|
|
|
mobileanarchy
Newbie
Offline
Activity: 60
Merit: 0
|
|
June 25, 2018, 11:43:57 PM |
|
When trying to run the miner in benchmark mode it seems to ignore the algo parameter (it's always trying to bench blakecoin and fail). Please fix by either wiring up the algo passed in as a parameter, or hardcode lyra2z instead of blakecoin. Reproducible by running: coolMiner-x64 --algo=lyra2z --benchmark --time-limit 20 I'm trying to plug this miner into my GUI: https://bitcointalk.org/index.php?topic=2907433.0And benchmarking is a crucial functionality needed to make it work. Thanks.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 26, 2018, 05:02:56 AM |
|
Thank you , I have fixed it now, will release v1.5 in few days.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Miner2525
|
|
June 26, 2018, 07:19:09 AM |
|
Thank you , I have fixed it now, will release v1.5 in few days.
Please fix your miner so that -r 0 exits (and not retries indefinitely) as is standard with the other major miners.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 26, 2018, 01:02:59 PM |
|
Thank you , I have fixed it now, will release v1.5 in few days.
Please fix your miner so that -r 0 exits (and not retries indefinitely) as is standard with the other major miners. I did it with V1.4, but the miner crush/restart wastes time too, the problem is with ccminer when using 2 pools, I am trying to fix that. Moreover- new Driver is out: Geforce-398-36-whql-driverhttp://www.guru3d.com/files-details/geforce-398-36-whql-driver-download.html
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Antony197878
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 27, 2018, 04:32:29 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
|
|
|
|
kokyew
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 27, 2018, 04:53:45 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
Do you mind sharing the codes here?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 27, 2018, 05:04:39 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
why all the trouble? V1.4 exit's miner in case of connection problem, so u can use it, frequent miner restart looses profit because of the time takes to send first share after miner start. V1.4 should be better in this case. I will try to check if something changed in ccminer v2.3 in this matter.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Antony197878
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 27, 2018, 05:42:36 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
why all the trouble? V1.4 exit's miner in case of connection problem, so u can use it, frequent miner restart looses profit because of the time takes to send first share after miner start. V1.4 should be better in this case. I will try to check if something changed in ccminer v2.3 in this matter. do you really wanna restart/check it works manually every hour?))) rofl - you might never sleep also?)
|
|
|
|
Antony197878
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 27, 2018, 05:52:24 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
Do you mind sharing the codes here? @echo on :start Timeout /T 900 Taskkill /IM coolMiner-x64.exe /F Timeout /T 5 Start "miner" cmd /c *.bat Timeout /T 5 goto start PS - put this batch to the same folder as miner and its bat. better put folder in c:\ (root of C) for no mistaking/long path to file. * = name of your start bat. first time i start original bat and just after - this bat. after this it all goes without your help ;-)
|
|
|
|
platinum4
|
|
June 27, 2018, 09:41:22 AM |
|
Thank you , I have fixed it now, will release v1.5 in few days.
Can this be built off of ccminer v2.3 and not v2.2.5
|
|
|
|
Dr_Victor
|
|
June 29, 2018, 07:19:32 PM |
|
What about power of gtx 1080ti to get 3.7M?
|
yobit.net is banned from signatures
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 29, 2018, 07:30:09 PM |
|
I got Zotac AMP Extreme (320W TDP @bios) so the min power I can get is 160W @50% TDP, for me getting to 3.7Mhs is easy and should be at 160~170W, going to 3.75~3.85 is the hard part. I am interested to see how other lower TDP 1080Ti models can do with tweaking, I can't get lower then 50% TDP on my card unless I lower Vcore but it lowers Core Clock- unlike 250W 1080Ti's that can have better hashrate @ 130W.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
sundownz
|
|
June 30, 2018, 05:11:54 PM |
|
Update: coolMiner-v1.4! * Found solution to the error: stuck in a loop "retry after 5 seconds"- when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it. So... how can I make the re-launch automatic without a secondary batch file ? Set it up on 5 machines & left for 20 minutes -- all 5 have closed.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
June 30, 2018, 05:18:41 PM |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
sundownz
|
|
June 30, 2018, 05:24:37 PM Last edit: June 30, 2018, 06:19:10 PM by sundownz |
|
Thanks. Will give that a shot. I am changing all my NVIDIA stuff to Lyra2z for the summer... my bitcoin room is crazy hot.
|
|
|
|
Antony197878
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 30, 2018, 09:31:46 PM |
|
Update: coolMiner-v1.4! * Found solution to the error: stuck in a loop "retry after 5 seconds"- when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it. So... how can I make the re-launch automatic without a secondary batch file ? Set it up on 5 machines & left for 20 minutes -- all 5 have closed. well - there 2 things might be. 1- you did something wrong while making/starting those .bat s (it worked for me for 2-3 day without problem) 2- after couple days those 1.3 miner started to disappear suddenly (whatever i did to start it it just closing after 5-10 seconds of work) but i bet it s not my fault))) PS - it you try to do that config with goto (link above) you ll have several copies of working miners bcz it doesnt kill the task in task manager. and mine killing the task and creating new window with miner. and also you may try it on 1.4ver but i tested with 1.3 (though i think it doesnt matter) mostly i thing its windows10 bugs. just received an update on it, so tomorrow will try again
|
|
|
|
sundownz
|
|
June 30, 2018, 09:40:43 PM |
|
Update: coolMiner-v1.4! * Found solution to the error: stuck in a loop "retry after 5 seconds"- when there is stratum connection/Stratum authentication error- now the miner will exit so you can monitor and relaunch it. So... how can I make the re-launch automatic without a secondary batch file ? Set it up on 5 machines & left for 20 minutes -- all 5 have closed. well - there 2 things might be. 1- you did something wrong while making/starting those .bat s (it worked for me for 2-3 day without problem) 2- after couple days those 1.3 miner started to disappear suddenly (whatever i did to start it it just closing after 5-10 seconds of work) but i bet it s not my fault))) PS - it you try to do that config with goto (link above) you ll have several copies of working miners bcz it doesnt kill the task in task manager. and mine killing the task and creating new window with miner. and also you may try it on 1.4ver but i tested with 1.3 (though i think it doesnt matter) mostly i thing its windows10 bugs. just received an update on it, so tomorrow will try again I set it up as per the link Ryzen2700x shared and it seems to be working smooth now. The miner does periodically error out but the .bat file gets it going again.
|
|
|
|
coinwiz84
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 01, 2018, 07:36:49 AM |
|
I get instant rig freezes with this miner, even without OC and reduced intensity. I don't have this problem with ccminer, anyone know what the problem could be? I have 2x1080ti 2x1070ti, 1x1060 6GB and 1x1050ti
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
July 01, 2018, 12:46:25 PM |
|
Drivers?
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
clan122
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 02, 2018, 07:27:19 AM |
|
well) i just find a decision) it s not beautiful but hope it works) i just made one bat file to start miner and another one that counting down 15 minutes (for example) and killing miner process in task manager/waiting for couple seconds and starts first bat again in new cli window) and starts counting again. this rough thing hope will help from hanging and other problems)
I understood why you are failing you have the option - i 18 he makes a malfunction on another version, you have 16 I just changed the setting to 16 in V1.4 and everything works fine only the sense of what from V1.4 if there is only - i 18?
|
|
|
|
rgsnedds
Member
Offline
Activity: 952
Merit: 17
raskul
|
|
July 02, 2018, 08:43:21 AM Last edit: July 02, 2018, 08:54:32 AM by rgsnedds |
|
|
|
|
|
rgsnedds
Member
Offline
Activity: 952
Merit: 17
raskul
|
|
July 02, 2018, 09:21:08 AM |
|
very nice. I have run v1.4 in linux server and hashrates are expectionally improved...
1 x 1070ti, 1 x 1070 and 3 x 1060 previously not touching 7Mh/s, now reaching and easy 8MH/s
nice work dev.
I had some initial trouble getting the files into linux so I ended up downloading the tar.gz to my mac, then scp the file to my local rig (ubuntu 16.04 server).
cool-runnings!
|
|
|
|
dragonmike
|
|
July 02, 2018, 01:25:29 PM |
|
Does anyone know why changing power target in nvidiainspector has no impact on this miner? Whether I use 85% or 120% the power draw is exactly the same and I can't seem to increase clocks very much at all.
Basically I'm running my 1080's at 2.6 MH/s which isn't really anything to write home about...
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
July 02, 2018, 02:48:58 PM |
|
P-limit has no impact on Lyra2z, the power usage is always ~55% of your GPU's TDP. My 1080Ti is 320W so it uses 160W~170W at min, other 1080Ti blower model with 250W TDP uses 120W~130W. Only option to really oc the core clock is to increase the core voltage, try increasing the core voltage in small steps and see if helps.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
dragonmike
|
|
July 02, 2018, 03:35:19 PM |
|
P-limit has no impact on Lyra2z, the power usage is always ~55% of your GPU's TDP. My 1080Ti is 320W so it uses 160W~170W at min, other 1080Ti blower model with 250W TDP uses 120W~130W. Only option to really oc the core clock is to increase the core voltage, try increasing the core voltage in small steps and see if helps.
Ok, is there a command in nvidiainspector to increase core voltage? I would have thought that increasing power limit would allow nVidia's GPU boost to kick in and increase voltage automatically?
|
|
|
|
dragonmike
|
|
July 02, 2018, 03:43:56 PM |
|
Think I found it:
-lockVoltagePoint:0,%VOLT%
I will give it a go, i.e. test with values at or above 1075000. See what happens.
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 02, 2018, 05:59:54 PM |
|
Think I found it:
-lockVoltagePoint:0,%VOLT%
I will give it a go, i.e. test with values at or above 1075000. See what happens.
what result?
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
coinwiz84
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 02, 2018, 08:56:44 PM |
|
Drivers?
I've rolled back and forth and completely uninstalled them so many times I've lost count. I've been trying to troubleshoot individual cards by running several instances of the miner, but I can't find any logic behind the crashes. It only affects the higher end cards 1070ti and 1080ti. It kind of looks like the PSU is shutting down, but that's kinda impossible since other algos use way more power than lyra2z and run stable.
|
|
|
|
dragonmike
|
|
July 03, 2018, 09:05:23 AM |
|
Think I found it:
-lockVoltagePoint:0,%VOLT%
I will give it a go, i.e. test with values at or above 1075000. See what happens.
what result? Not a damn thing. I set the voltage at 1100000, power draw increased by a whooping 10W for the whole rig, but I was hardly able to overclock any more than before... and only lost stability. No positive impact whatsoever.
|
|
|
|
Jiboo
Newbie
Offline
Activity: 15
Merit: 1
|
|
July 03, 2018, 10:14:34 AM |
|
Hi,
I'm unable to download both 1,3 and 1.4 due to windows detecting virus/trojan.
"trojanddropper:win32/sirefef.gen!c"
|
|
|
|
N0VESKE
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 03, 2018, 10:32:29 AM |
|
CoolMiner 1.3 is most stable and favorite for my lyra2z rig.
|
|
|
|
n3g4t1v337
Newbie
Offline
Activity: 37
Merit: 0
|
|
July 03, 2018, 03:37:05 PM |
|
What intensity are people using for respective cards?
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 04, 2018, 04:44:48 AM |
|
What intensity are people using for respective cards?
I have 1063, 1070, 1070ti, 1080 I have experimentally established that the intensity value above 19 does not lead to an increase in the hashed
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
milfstick
Newbie
Offline
Activity: 41
Merit: 0
|
|
July 04, 2018, 06:40:11 AM |
|
Good miner high hashes just wish it wouldnt keep stopping after an hr or so
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 05, 2018, 03:43:35 PM |
|
Good miner high hashes just wish it wouldnt keep stopping after an hr or so Try the 1.3 version, and 398.11 driver.
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 05, 2018, 03:54:26 PM |
|
Good miner high hashes just wish it wouldnt keep stopping after an hr or so This is a dev fee
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
stevascha
Member
Offline
Activity: 312
Merit: 10
|
|
July 07, 2018, 03:57:19 AM |
|
when 1.5 is released?
|
|
|
|
Neat
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 07, 2018, 04:16:25 PM |
|
Any news regarding the new release?
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
July 08, 2018, 11:45:41 AM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
janjan090
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 08, 2018, 01:09:35 PM |
|
with the new miner how much is the daily income of a single 1080 TI???
|
|
|
|
zzl0244
Newbie
Offline
Activity: 35
Merit: 0
|
|
July 08, 2018, 01:59:56 PM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!. First of all, thanks to your coolminer, and will the new version 1.5 increase the hash?or more cooler? u know cryptodredge is 10% faster than coolminer althought 25% more TDP .
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
July 08, 2018, 02:17:02 PM |
|
Sry, this is what I could do, speed is same. Regarding other miners with higher TDP, every one should calculate if the added hash-rate compensates the extra electricity bill, some have cheap electricity and better cooling but some not.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 08, 2018, 03:27:16 PM |
|
cryptodredge is Winter Games
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
ripcurrent
Member
Offline
Activity: 160
Merit: 10
|
|
July 09, 2018, 04:01:25 AM |
|
Mine keeps shutting down after an hour..not to stable im afraid.
|
|
|
|
securitizones
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 09, 2018, 07:50:03 AM |
|
Hi
When is linux version of 1.5 available
|
|
|
|
principino1984
Newbie
Offline
Activity: 72
Merit: 0
|
|
July 09, 2018, 07:50:29 AM |
|
|
|
|
|
valentoz
Newbie
Offline
Activity: 17
Merit: 0
|
|
July 09, 2018, 08:39:31 AM |
|
What intensity to use for cards 1070ti and 1080?
|
|
|
|
Bobi-MK
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 09, 2018, 02:30:19 PM |
|
posted in discord from ohgodagurl: "Red Pill" Core equal. Enjoy -- https[Suspicious link removed] What is this ?
|
|
|
|
funnel
Newbie
Offline
Activity: 34
Merit: 0
|
|
July 09, 2018, 03:28:56 PM |
|
Probably a virus, don't run it or test it in a sandboxed enviroment only.
|
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
July 10, 2018, 01:56:40 AM |
|
Anyone know why T-Rex smashes all other Lyra2z miners? Coolminer was on top for a while but I haven't seen a better hash anywhere else. Wondering if coolminer has plans to improve on algo and compete?
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
kantoi
Newbie
Offline
Activity: 84
Merit: 0
|
|
July 10, 2018, 06:27:59 PM |
|
I just tried the newest version v1.5 but after the 24h disconnect of my provider the miner stopped working and didn't try to reconnect? Is that how it is supposed to be? Because then people with a 24h disconnect cannot use it - it should at least try to reconnect a few times/minutes before it stops working... The only stable and working version for me is v1.3
|
|
|
|
hogwash.89m
Newbie
Offline
Activity: 32
Merit: 0
|
|
July 10, 2018, 09:20:54 PM |
|
posted in discord from ohgodagurl: "Red Pill" Core equal. Enjoy -- https[Suspicious link removed] AV got full RED, probably wallet stealer virus!
|
|
|
|
jelome198959
Newbie
Offline
Activity: 196
Merit: 0
|
|
July 10, 2018, 09:56:42 PM |
|
Anyone know why T-Rex smashes all other Lyra2z miners? Coolminer was on top for a while but I haven't seen a better hash anywhere else. Wondering if coolminer has plans to improve on algo and compete?
Right, I didn't believe it either at first but it reports same hashrate poolside.
|
|
|
|
CryptoSifus
Jr. Member
Offline
Activity: 90
Merit: 2
|
|
July 11, 2018, 10:39:01 AM |
|
Anyone know why T-Rex smashes all other Lyra2z miners? Coolminer was on top for a while but I haven't seen a better hash anywhere else. Wondering if coolminer has plans to improve on algo and compete?
Right, I didn't believe it either at first but it reports same hashrate poolside. Yeah the proof for me was way more coins hitting my wallet on average. Love to see that from coolminer too!
|
★ PRiVCY ➢ Own Your Privacy! ➢ Best privacy crypto-market! ★ ✈✈✈[PoW/PoS]✅[Tor]✅[Airdrop]✈✈✈ (https://privcy.io/)
|
|
|
Mapuo
|
|
July 13, 2018, 11:13:36 PM Last edit: July 14, 2018, 06:56:30 PM by Mapuo |
|
|
|
|
|
nsummy
|
|
July 14, 2018, 05:27:45 AM |
|
People stating that other miners are faster need to look at the name of this miner: coolminer. At some point you cannot increase hashrate without increased power usage. To me coolminer is a good happy medium. Much faster and cooler than ccminer, not as fast as t-rex, but much cooler!
|
|
|
|
kantoi
Newbie
Offline
Activity: 84
Merit: 0
|
|
July 16, 2018, 11:07:52 PM |
|
People stating that other miners are faster need to look at the name of this miner: coolminer. At some point you cannot increase hashrate without increased power usage. To me coolminer is a good happy medium. Much faster and cooler than ccminer, not as fast as t-rex, but much cooler!
That's exactly what I think about coolminer - I like that it runs cooler but still has a good hashrate. I just wish that the 24h disconnect gets fixed with the next version otherwise I'm stuck with v1.3
|
|
|
|
kantik2133
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 19, 2018, 05:11:17 AM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!. Download is ok, but archive is bad. Please chek it out
|
|
|
|
Multipulty2018
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 24, 2018, 04:40:04 PM |
|
v1.5 faster than older versions?
|
GOeureka 『 https://goeureka.io/ 』 Next-Gen Solution Shaping the Future of Online Hotel Booking
|
|
|
Techgtv
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
July 27, 2018, 12:40:23 AM |
|
Works fine on my 1080TI, but does not work on my (12 card ) 1050TI, or 1070TI rigs. when starting it, it just dissapears right away
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 27, 2018, 03:19:21 PM |
|
Works fine on my 1080TI, but does not work on my (12 card ) 1050TI, or 1070TI rigs. when starting it, it just dissapears right away
Whats the driver on the 1050 and 1070 rigs?
|
|
|
|
ETS
Newbie
Offline
Activity: 24
Merit: 0
|
|
July 29, 2018, 05:50:01 AM |
|
11:58:19 PM Saturday, July 28, 2018 : [2018-07-28 23:58:19] Stratum connection failed: Failed to connect to lyra2z.usa.nicehash.com port 3365: Timed out 11:58:24 PM Saturday, July 28, 2018 : [2018-07-28 23:58:24] ...terminating workio thread 11:58:25 PM Saturday, July 28, 2018 : C:\Users\edgar\OneDrive\Desktop\v19a/miners/coolminer14/coolMiner-x64.exe: unsupported non-option argument 'c=MCT' (see --help)
I am guessing that is the dev fee can you please double check and make sure it is still good because it is stopping my miner
|
|
|
|
Bearier
Jr. Member
Offline
Activity: 149
Merit: 3
|
|
July 31, 2018, 06:04:24 AM |
|
.bat file for reference:coolMiner-x64 -a lyra2z -o stratum+tcp://<PoolURL>:<PORT> -u <WALLET_ADDRESS> -p <OPTIONS> -i 19 --hide-diff -q for which the parameter is needed: "--hide-diff -q " it is mandatory to specify? and what to write after: "-q"
|
|
|
|
Lex237
Newbie
Offline
Activity: 2
Merit: 0
|
|
August 14, 2018, 12:32:04 PM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!. Does not download, writes "Sorry, your files have expired"
|
|
|
|
SchroedingerC
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 14, 2018, 06:51:53 PM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!. Does not download, writes "Sorry, your files have expired" same here
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
August 16, 2018, 07:26:03 PM |
|
Update: coolMiner v1.5:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Should be more stable then v1.4, also will exit miner if no connection to pool.*Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=18fc2-656f14b5Password: 1fUTHNff Hope you like it, Have a Cool Day!. Does not download, writes "Sorry, your files have expired" same here same here, any chance to use some other cloud storage for download? mega/google
|
|
|
|
sofy71
Newbie
Offline
Activity: 54
Merit: 0
|
|
August 18, 2018, 08:42:52 AM |
|
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
August 19, 2018, 07:57:34 AM |
|
Sry a I was not active, I will Recompile V1.3 that all of you liked with the V1.5 fixes. I will try to Re-upload today.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
August 19, 2018, 02:24:48 PM |
|
Update: coolMiner v1.6- Based on V1.3 with V1.5 fixes:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Based on V1.3 so stability should be the same. *Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=1bc41-59d797b5Password: O4DWq71G Hope you like it, Have a Cool Day!.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
SchroedingerC
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 19, 2018, 06:31:32 PM |
|
thanks! is there any help/readme file with launch parameters info? never found it
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
August 19, 2018, 06:49:27 PM |
|
Its same as ccminer since it's modded v2.2.6: https://github.com/tpruvot/ccminer
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
SchroedingerC
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 20, 2018, 11:47:54 AM |
|
thanks again!!1
|
|
|
|
zbutterfly
|
|
August 21, 2018, 05:20:09 PM |
|
Same speed ccminer 2.3 (1080ti), this my stuffNeed more speed
|
|
|
|
m1hyka
Newbie
Offline
Activity: 9
Merit: 0
|
|
August 26, 2018, 03:02:57 PM |
|
Hi here, Nvidia RTX 20xx series will be supported?
|
|
|
|
SchroedingerC
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 26, 2018, 06:28:09 PM |
|
Due to presentation RTX 20xx (Turing GPUs) are made for human eye satisfaction, not for miners. It will be probably even slower in mining than 10xx series (and ~6 times faster in grafics). Miners must wait for Ampere GPUs... hypothetically
|
|
|
|
DonMaxim
Newbie
Offline
Activity: 140
Merit: 0
|
|
September 02, 2018, 09:07:19 PM |
|
Update: coolMiner v1.6- Based on V1.3 with V1.5 fixes:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Based on V1.3 so stability should be the same. *Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=1bc41-59d797b5Password: O4DWq71G Hope you like it, Have a Cool Day!. Works great! Thanks
|
|
|
|
MaynardVII
Newbie
Offline
Activity: 72
Merit: 0
|
|
September 13, 2018, 01:04:40 PM |
|
Update: coolMiner v1.6- Based on V1.3 with V1.5 fixes:*Fixed "--benchmark" mode, now you can benchmark lyra2z algo. *Fixed memory leaks in lyra2z.c *Based on V1.3 so stability should be the same. *Time between fee mining increased by 20%(every hour+, less pool switching per 24H). *Added "Blks.found:" to display the number of Block Found. SENDfiles:64Bit: Download Link: http://www.sendfiles.net/?uid=1bc41-59d797b5Password: O4DWq71G Hope you like it, Have a Cool Day!. Where is linux version? I can't find a github for it to compile.
|
|
|
|
IamDesperado
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 13, 2018, 07:42:54 PM |
|
Any chance of getting a Linux version of your work? Or a link to the source repository so I can compile it myself for Linux?
Thank you!
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
October 14, 2018, 06:31:50 PM |
|
This was one promising miner. sad not developed anymore.
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
October 28, 2018, 06:18:53 AM |
|
Sry for not updating, I am compiling with Cuda 10 and will post download link later today.
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
October 28, 2018, 05:24:08 PM Last edit: October 30, 2018, 06:44:36 PM by Ryzen2700x |
|
Update: coolMiner-v1.7!
Release notes and download link: *Compiled with Cuda10. *Added Newest Nvidia RTX support (sm75). *Added option to select fee mining pool location EU/US/ASIA based on your choice. Download 64bit:https://file.fm/f/4zy6dqg6
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
goldchester
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 30, 2018, 06:58:45 AM |
|
hi.. can you mirror it? i'm having trouble while i want to download the files..
|
|
|
|
Ryzen2700x (OP)
Jr. Member
Offline
Activity: 157
Merit: 6
|
|
October 30, 2018, 07:44:07 AM Last edit: October 30, 2018, 06:44:45 PM by Ryzen2700x |
|
|
[ANN] coolMiner - Lyra2z Miner for nVidia! (https://bitcointalk.org/index.php?topic=4412370.0)
|
|
|
pahanm84
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 19, 2018, 05:13:26 PM |
|
coolMiner the link does not work
|
|
|
|
questen
Newbie
Offline
Activity: 45
Merit: 0
|
|
August 10, 2019, 06:21:03 AM |
|
https://mega.nz/#!oAxQECID!NhG25zQxieaWnK-OrxrAGULvv-7Oy-MGtQirLKP45fg
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3136
Merit: 1003
|
|
August 10, 2019, 10:07:17 PM |
|
Lyra2z is ASIC now.
|
|
|
|
|