How To EASILY Clean Your Mining Rig - Cleaning 1 Year Old Miner +Any Other Tips?

[VoskCoin]

I bought back my original GPU Mining Rig and it is well overdue for a comprehensive cleaning. This RX470 Miner has been mining Ethereum since it was under $40 USD?! Today I show you how to clean your mining rig QUICK and EASY! (the basics)

https://youtu.be/oi3Ro0AJdBQ


Buy Compressed Air Cans on Amazon - http://geni.us/DEZGO
Buy an Air Compressor on Amazon - http://geni.us/gRxBeE9

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to http://Amazon.com and affiliated sites.

[1715094018]

1715094018

[1715094018]

1715094018

[lolchina]

Why not ask the girl behind you if you can borrow her hair dryer(preferably if it have switch for hot/cold air)so you dont have to bother actualy shoping anything?I use this system for all my rigs and its working nice so far,just hold gpu vents when you point air on them so they dont spin to fast

[Vann]

I would suggest investing in a DataVac electronic air duster instead of using canned air. More effective and you don't have to keep buying canned air. A small air compressor is another option, but it's less convinient and easy to overdue it with too much air pressure. You also have to be aware of moisture and condensation from using compressed air.

https://www.newegg.com/Product/Product.aspx?Item=N82E16896367002&cm_re=duster-_-96-367-002-_-Product

With any cleaning method involving air be sure to keep the fan blades from moving as it's easy to damage them from spinning too fast and also shattering the blades off if it hits something while it's spinning.

[lolchina]

I would suggest investing in a DataVac electronic air duster instead of using canned air. More effective and you don't have to keep buying canned air. A small air compressor is another option, but it's less convinient and easy to overdue it with too much air pressure. You also have to be aware of moisture and condensation from using compressed air.

https://www.newegg.com/Product/Product.aspx?Item=N82E16896367002&cm_re=duster-_-96-367-002-_-Product

With any cleaning method involving air be sure to keep the fan blades from moving as it's easy to damage them from spinning too fast and also shattering the blades off if it hits something while it's spinning.

Most of air compresor have some kind of release valve for moisture and condensation so you dont have to worry about that,wanted to mention them as a way to clean your rigs but hair dryer with cold air switch just looks like more practical solution

[CryptoAllDay]

Compressed air is doing wonders for my mining rig.  After several months I give it a good spray and it lowers temps by a few degrees from all the accumulated dust.  Other than that, I just wipe the outside dust down and make sure the vents can breathe.

[nc50lc]

Why not ask the girl behind you if you can borrow her hair dryer(preferably if it have switch for hot/cold air)so you dont have to bother actualy shoping anything?I use this system for all my rigs and its working nice so far,just hold gpu vents when you point air on them so they dont spin to fast

The airflow is way too weak to remove the dusts from confined spaces and corners.
Compressed air is the best choice, but for a practical solution, yes Hair dryer on cold setting will do the job.

But any of these can't remove the stuck dusts on the fan's surface, I'm using cotton swabs dipped in alcohol to clean them thoroughly.

[Sevarchik]

You can use old canister cleaner with function blow out.
Or supersolution go to the tire vulcanization and use compressor, hold cooler with your hand while cleaning

[Ryzen2700x]

I use this :
https://www.kaercher.com/int/home-garden/multi-functional-vacuum-cleaners/multi-purpose-vacuum-cleaners/wd-3-premium-home-16298500.html
 
But now I am considering designing a tall mining frame from  T-Slot Aluminum Profiles with integrated filter and strong Fan to save space and keep the rig clean.

[aundroid]

I have this one, the so called compu cleaner: https://www.amazon.com/EasyGo-CompuCleaner-Electronic-Alternative-Compressed/dp/B00S7CH6FK/ref=sr_1_fkmr2_1?ie=UTF8&qid=1528872604&sr=8-1-fkmr2&keywords=IT+Dusters+CompuCleaner+Xpert

And can totally recommend it.

Perfect to clean your rigs, pc, server ...

[Marvell2]

@voskcoin and others thanks for this thread, i will try out that electic duster

[lolchina]

Why not ask the girl behind you if you can borrow her hair dryer(preferably if it have switch for hot/cold air)so you dont have to bother actualy shoping anything?I use this system for all my rigs and its working nice so far,just hold gpu vents when you point air on them so they dont spin to fast

The airflow is way too weak to remove the dusts from confined spaces and corners.
Compressed air is the best choice, but for a practical solution, yes Hair dryer on cold setting will do the job.

But any of these can't remove the stuck dusts on the fan's surface, I'm using cotton swabs dipped in alcohol to clean them thoroughly.

Well i personaly use tractor and its air compresor with an air hose that have special piston gun on the end(similar to pistons that are being used for painting)and can clean pretty much everything with it but then again its not really practical for everyone

[adaseb]

Yes basically compressed air from a compressor is the quick and easy way to do it.

However 2 things to keep in mind.

First one is make sure there isn't too much pressure, if too much pressure you will either crack a fan blade or you will spin the fan blade way too fast and destroy the bearing.

Second is hold the fan blades with a pencil or screwdriver when you blow into it so it doesn't spin, basically for the same reason as above.

Also make sure you turn off your rig first, don't do it while it running to prevent losing mining profits, its dangerious doing so.

[remauto1187ma]

There is no way in hell I would use a compressor unless (A) the air pressure was regulated down (B) the whole system has a Drier installed.  Theres a genius idea... Use compressed air full of water and blow it all over an electronic circuit.

I got this..https://www.amazon.com/gp/product/B0787KXTFW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1&pldnSite=1

Probably too expensive for someone running a few GPU's but im over 30 gpu's and time is money and money not to be wasted on cans of air.

[VoskCoin]

I would suggest investing in a DataVac electronic air duster instead of using canned air. More effective and you don't have to keep buying canned air. A small air compressor is another option, but it's less convinient and easy to overdue it with too much air pressure. You also have to be aware of moisture and condensation from using compressed air.

https://www.newegg.com/Product/Product.aspx?Item=N82E16896367002&cm_re=duster-_-96-367-002-_-Product

With any cleaning method involving air be sure to keep the fan blades from moving as it's easy to damage them from spinning too fast and also shattering the blades off if it hits something while it's spinning.

Yeah I was looking at that or the metrovac -- but I used a metrovac in my detailing days and my god does that machine pierce your ears (AND WITH SUCH A SMALL PACKAGE lol)

Unfortunately my air compressor broke in our last move, but like you stated the issue w/ moisture in it. I never had a water trap, did not really need it & was a basic model

[VoskCoin]

Why not ask the girl behind you if you can borrow her hair dryer(preferably if it have switch for hot/cold air)so you dont have to bother actualy shoping anything?I use this system for all my rigs and its working nice so far,just hold gpu vents when you point air on them so they dont spin to fast

The airflow is way too weak to remove the dusts from confined spaces and corners.
Compressed air is the best choice, but for a practical solution, yes Hair dryer on cold setting will do the job.

But any of these can't remove the stuck dusts on the fan's surface, I'm using cotton swabs dipped in alcohol to clean them thoroughly.

But any of these can't remove the stuck dusts on the fan's surface, I'm using cotton swabs dipped in alcohol to clean them thoroughly.

This works wonders for me too, is there any good data AGAINST doing this? With the evap. time on alch (personally use 70 or 90% ipa, can just grab it at a local CVS walgreens etc) it is a much better bet than water or water+detergent etc

[VoskCoin]

@voskcoin and others thanks for this thread, i will try out that electic duster

my pleasure , the community is contributing better info than me xD

Always good to see you

[Iamtutut]

I bought back my original GPU Mining Rig and it is well overdue for a comprehensive cleaning. This RX470 Miner has been mining Ethereum since it was under $40 USD?! Today I show you how to clean your mining rig QUICK and EASY! (the basics)

https://youtu.be/oi3Ro0AJdBQ


Buy Compressed Air Cans on Amazon - http://geni.us/DEZGO
Buy an Air Compressor on Amazon - http://geni.us/gRxBeE9

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to http://Amazon.com and affiliated sites.

My "secret" dust removing tool:


Yeah, I'm old school !

[Ryzen2700x]

Nice trick for refiling used compressed air cans using Tyre valve:
https://youtu.be/KWIL_jhk-y8

[vodafone228]

I am using a 1600W electronic air duster, works great for my rig.  Just remember to wear a mask when you clean it.

[remauto1187ma]

I am using a 1600W electronic air duster, works great for my rig.  Just remember to wear a mask when you clean it.

Mask is only needed if you are a sissy boy allergic to everything.