Asic.to Custom Firmware - Optimize Performance & Efficiency S19j Pro 200th/s

[x3aklili]

teserz , still not have any news from DARVAL?

my T9+ still bricked because for Dollsmizer Scam firmware.

[1713584309]

1713584309

[taserz]

teserz , still not have any news from DARVAL?

my T9+ still bricked because for Dollsmizer Scam firmware.

I haven't heard from Darval in a few weeks. I know if there is someone that could fix it it would probably be him.

[cvokey]

So is there a version that works for the T9's? I did not see one on github.
i have tried the S9 880 on a few of my S9i's and so far it is great but i havent pushed it past 750 MHz yet and i will probably get it on the rest.  i just have a bunch of T9's that i would love to get running a bit faster.

Thanks

[BCMKZ8x]

Hi taserz,

I tested with my S9 13.5Th/s today (2 PSU), at 725mhz it generated 14,965TH/s (ideal 15,620TH/s) and consumed 1753W. But at 750mhz the result was not different when it consumed 50W more. And last time i tried at 800mhz, the result even worse, it dropped down to around 14,000TH/s and ate 1900++W. Each time i tested for 15-30mins and HW error is minor so don't count. Please advise if my S9 reached its limitation or what ?

Thank you in advance, i really appreciate !

[taserz]

Hi taserz,

I tested with my S9 13.5Th/s today (2 PSU), at 725mhz it generated 14,965TH/s (ideal 15,620TH/s) and consumed 1753W. But at 750mhz the result was not different when it consumed 50W more. And last time i tried at 800mhz, the result even worse, it dropped down to around 14,000TH/s and ate 1900++W. Each time i tested for 15-30mins and HW error is minor so don't count. Please advise if my S9 reached its limitation or what ?

Thank you in advance, i really appreciate !

Try one of the firmware above 8.8v (880) try 8.9 or the 9volt one. If you big mhz changes result in almost now th/s increase you need more power otherwise picking high frequency with not enough power it will just suck power and get crap results.

[Chain62]

Thank you for this awesome tool taserz! I'll definitely be sending a donation.

Question - I am not able to see the temperatures at all (at any frequency).

https://drive.google.com/file/d/1RwNg0lbSvgd-WDVx0N1yVJcjGxG2nj8i/view

I read where you said that the machine will turn off if it overheats, but is there any way to get the temperature to show?

[halaszlaci]

Hi there. I would have an Antminer S9i factory 14TH version. I want to operate at 15TH clock.You can help me in taserz? I need a firmware that does not steal your performance thank you in advance.

[taserz]

Hi there. I would have an Antminer S9i factory 14TH version. I want to operate at 15TH clock.You can help me in taserz? I need a firmware that does not steal your performance thank you in advance.

Yes this will work on the s9i.

Thank you for this awesome tool taserz! I'll definitely be sending a donation.

Question - I am not able to see the temperatures at all (at any frequency).

https://drive.google.com/file/d/1RwNg0lbSvgd-WDVx0N1yVJcjGxG2nj8i/view

I read where you said that the machine will turn off if it overheats, but is there any way to get the temperature to show?

Try to flash the s9 650m Fixed and see if temps show. If temps don't show with official firmware it won't work with this one but it will still mine.

[halaszlaci]

Yes this will work on the s9i.

okay. Can you send me which version to put on my machine? What can I expect to increase performance? is there a chance to keep the temperature display?

[taserz]

okay. Can you send me which version to put on my machine? What can I expect to increase performance? is there a chance to keep the temperature display?

Read the thread. Yes

[halaszlaci]

Read the thread. Yes

okay. I can see multiple versions of GitHub (bmminer870, bmminer880, bmminer890, etc.). How do I change the TH ratio? Should I set the Volt or Mhz?

[taserz]

okay. I can see multiple versions of GitHub (bmminer870, bmminer880, bmminer890, etc.). How do I change the TH ratio? Should I set the Volt or Mhz?

change mhz after choosing which bmminer which is volts

[sahinkod]

no installation videos? please help installation speak English is bad, please do not delete my message.

[halaszlaci]

change mhz after choosing which bmminer which is volts

okay. I still have a question. I can not connect via the Putty program to the machine. It does not accept the password as root is root / root and is not good. There is a port number I do not understand why it would be a local network.

[taserz]

okay. I still have a question. I can not connect via the Putty program to the machine. It does not accept the password as root is root / root and is not good. There is a port number I do not understand why it would be a local network.

It's root:admin for putty.

[thierry4wd]

okay. I still have a question. I can not connect via the Putty program to the machine. It does not accept the password as root is root / root and is not good. There is a port number I do not understand why it would be a local network.

Hi, it's actually a bug,

1: go to your minor's page via the internet (as usual)
2: change the password (everything except root or admin) eg "rootroot123"
3: go back to try on puty with port 22

With pleasure

[Hockeybum]

Default web login: root
Default web password: root

Default SSH login: root
Default SSH password: admin

Default SCP login: root
Default SCP password: admin

Just like Taserz posted in the OP and responded with 2 posts above, no bugs involved, just a different default password.

[thierry4wd]

teserz , still not have any news from DARVAL?

my T9+ still bricked because for Dollsmizer Scam firmware.

Hi, well ... I now have the same problem (thanks Taserz for BMMINER-880-T9 + in passing;))

After analysis, in fact the firmware did not burn your cards, when changing the BMMINER, this one in the kernel log did: "pic error, need restore, restoring"

In reality, the T9 + is composed of 3 channels of 18 asics per card,

After analysis, the damaged card:
-1 has a string of 18 unassigned asics
-2 string asics not assigned
-3 all the chains are lost not assign (the 3)

You can check my arguments by fading through the fan, you see red led lights, a red led corresponds to a chain of 18 asics ...

The problem now, now that we REALLY know the failure, we must successfully reprogram the "dsPIC33EP16GS202"!

Interestingly, when changing BMMINER, it was reprogrammed automatically!
                                       

Ps: Taserz, you will notice that I do not allow myself to insult you, in spite of a BMMINER who completely burned my minor ... I just hope that my message will not be suppressed like all the others! and maybe one day it will be able to discuss it amicably !!!

[thierry4wd]

Sorry i edit my diag after most test !

Only chain 1 and 2 are lost but is reprograming the pic with wronk fw .....

I continued my recherche...

[tim-bc]

Ps: Taserz, you will notice that I do not allow myself to insult you, in spite of a BMMINER who completely burned my minor ... I just hope that my message will not be suppressed like all the others! and maybe one day it will be able to discuss it amicably !!!

taserz clearly indicated at the top of the thread that "This is made for the 13.5th and 14th S9i." Nowhere at all does he mention anything about putting it onto the T9+. As far as I know you are the first to brick a T9+ with his S9 firmware mod.