Bitmain S4-B1 2TH $1495.- / ASICminer Tube 800+GH $350 / 112bit.com

[topminingcontracts]

Antminer S1 in Stock Again, New Price u$s 518.50.

Make your orders before it is SOLD OUT again.

[1715446050]

1715446050

[1715446050]

1715446050

[techman05]

Hey just wondering if anyone recent or past have a valid power supply for these ant miners ? I have a antec true power 2.0 power supply with 550 watts with 2 pci express plugs and it doesn't seem to have the kick to run this. I found that through a troubleshooting post somewhere I lost that if I unplug blade 2's power that blade one will run so I have a basic conclusion that its hopefully a power issue. with both on after lan comes on it shuts off.

I'd love to hope its a firmware issue but it looks like it has the most recent and I'm sure there'd be a bunch more posts with the amount being sold  this month. Only thing I saw unplugged so far was the wireless antenna , so I'm hoping I'm not missing another cable.



Any ideas?  Thanks

[ManeBjorn]

Check the 12v rail on it and make sure it is a higher one.  Some of the Antec's have sub 18a 12 v rails.  You want at least 18a or higher.
Corsair, Thermaltake and others make some solid PSU's with higher amp 12v rails.
I hope it helps and Happy Mining.

Hey just wondering if anyone recent or past have a valid power supply for these ant miners ? I have a antec true power 2.0 power supply with 550 watts with 2 pci express plugs and it doesn't seem to have the kick to run this. I found that through a troubleshooting post somewhere I lost that if I unplug blade 2's power that blade one will run so I have a basic conclusion that its hopefully a power issue. with both on after lan comes on it shuts off.

I'd love to hope its a firmware issue but it looks like it has the most recent and I'm sure there'd be a bunch more posts with the amount being sold  this month. Only thing I saw unplugged so far was the wireless antenna , so I'm hoping I'm not missing another cable.



Any ideas?  Thanks

[Unacceptable]

Check the 12v rail on it and make sure it is a higher one.  Some of the Antec's have sub 18a 12 v rails.  You want at least 18a or higher.
Corsair, Thermaltake and others make some solid PSU's with higher amp 12v rails.
I hope it helps and Happy Mining.

Hey just wondering if anyone recent or past have a valid power supply for these ant miners ? I have a antec true power 2.0 power supply with 550 watts with 2 pci express plugs and it doesn't seem to have the kick to run this. I found that through a troubleshooting post somewhere I lost that if I unplug blade 2's power that blade one will run so I have a basic conclusion that its hopefully a power issue. with both on after lan comes on it shuts off.

I'd love to hope its a firmware issue but it looks like it has the most recent and I'm sure there'd be a bunch more posts with the amount being sold  this month. Only thing I saw unplugged so far was the wireless antenna , so I'm hoping I'm not missing another cable.



Any ideas?  Thanks

You need 2 SEPERATE PCIE cables,not just plugs.1 cable per blade.DO NOT RUN BOTH BLADES ON 1 CABLE,no psu can handle 400 watts on 1 cable,without burning up or failing hard.

[techman05]

I have seperate pci express cables, I just have the other unpluged. Blade 2 won't boot without power and I don't have enough right now to run it.

My supply has 19 amps on both rails. The 650 corsair I have my eyes on has 54 amps http://www.newegg.com/Product/Product.aspx?Item=N82E16817139012

Still other than some xml code error that flashes before each page the single blades running up in the high 80s on wireless so hopefully a higher amp will get me similar results when I plug that in.

[Unacceptable]

I have seperate pci express cables, I just have the other unpluged. Blade 2 won't boot without power and I don't have enough right now to run it.

My supply has 19 amps on both rails. The 650 corsair I have my eyes on has 54 amps http://www.newegg.com/Product/Product.aspx?Item=N82E16817139012

Still other than some xml code error that flashes before each page the single blades running up in the high 80s on wireless so hopefully a higher amp will get me similar results when I plug that in.

That Corsair is fine,I use CX600's & have had no issues,heard the CX500 is good too  

BTW,Dogie did a guide for PSU's 

https://bitcointalk.org/index.php?topic=486121

[reesev]

I would like to order 7 units ASAP will you match the price of the official site or ninjatech? on site your $3629 and on the other 2 sites its $2991 at moment.  Would love to order from you with have more payment options.. let me know  K thanks!

[techman05]

Is the main fan replaceable with another type? Its noiser than I expected and want to try other options if possible.

This is what I want to replace it with though I may still end up buying a noctura to see if that is supposed to be the ultimate quiet cooling fan.

  http://www.newegg.com/Product/Product.aspx?Item=N82E16835192022


Thanks

[nexus99]

Are you actually selling the S2?

[topminingcontracts]

Are you actually selling the S2?

We will have news on S2 very soon follow us on Twitter @112bit

[topminingcontracts]

New Price Antminer S1 @ u$s 410.56.

Will fly from stock.

[reesev]

PM sent i would like to purchase 8 units.

[kweejee]

Great deal on those S1's. Anyone would be dumb enough to pass up on that.

GLWS

[xdmlaser]

For PSUs for the Antminers, I have a 500w EVGA that is solid and only costs $45 lol it has the amps and certified power to handle it.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438016

[techman05]

For PSUs for the Antminers, I have a 500w EVGA that is solid and only costs $45 lol it has the amps and certified power to handle it.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438016

Still could have been nice to include something like this when bought. The note on my order only warned I need a supply and install experience.

If they're are finding a way to get it this low shouldn't we have 3 blades now. If they can get a quieter fan on these I'd look to buy another if I can find a 4 plug pci e power supply.

\e techman05 now grumbles at how much the price dropped in a week.

[reesev]

I have sent this company multiple emails and messages over the last couple of days.. and still no responses.

[Unacceptable]

For PSUs for the Antminers, I have a 500w EVGA that is solid and only costs $45 lol it has the amps and certified power to handle it.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817438016

That PSU won't work,only 1 PCIE cable with 2 connectors,you need 2 separate cables!!! Be careful  

CX600 or CX500 have 2 separate cables & work just fine.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139027

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028

As for a PSU that works with 2 Ants,DO NOT GET THE RM850,it has only 3 separate cables not 4  

I use this,it has 6-6pin cables for PCIE(& 3-8pin):

http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=4558892

Or:

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139044

Not sure what other PSU's have 4 separate cables (that are reasonably priced,less than $200),look through these threads for more PSU's:

https://bitcointalk.org/index.php?topic=344970.0

https://bitcointalk.org/index.php?topic=355387.0

https://bitcointalk.org/index.php?topic=379677.0

[topminingcontracts]

In some minutes... Good News.

[valkir]

Still waiting 

Keep the good work Juan! 

[ManeBjorn]

Sounds like it should be good if it is anything like the S2 announcement.

In some minutes... Good News.