miniZv2.3c Equihash144,5 125,4 210,9 150,5 192,7 Beam ProgPoW Ethash CFX KLS PYI

[miniZ]

DAG for Firo is only 4.51562201976776 GB.

Other miners, e.g. TeamRedMiner or WildRig run Firo just fine with 6GB.

Hi UselessGuru,
We answered to your request on our website, but we paste here again:
The only way to mine Firo on Windows will be implementing a zombie mode, but performance will be very low.
So low that the mining cost will largely surpass its profit.
Could you share the hashrate you get with other miners?
Cheers

[1714730218]

1714730218

[1714730218]

1714730218

[1714730218]

1714730218

[miniZ]

1. --priority is not working with win10 + admin rights.

2. MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G is detected as 3070

2.0b mined dev fee for almost 13 hours until miniz window was closed manually.

[ 0d 0h 3m00s|05:24:52 25/12/2022] S: 29/0/0 241(240.9)Sol/s 429(429.0)W [BitcoinZ]- 57ms
 2>RTX 3080     [16] S: 15/0 [67 C/85%]*76.89 I/s 152.54(152.54)Sol/s 270(270.3)W clk=1575MHz mclk=9501MHz Sol/W=0.564
 3>RTX 3060 Ti  [17] S: 14/0 [67 C/91%] 44.55 I/s  88.72( 88.72)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.559
[ 0d 0h 3m10s|05:25:02 25/12/2022] S: 30/0/0 241(240.9)Sol/s 429(429.0)W [BitcoinZ]- 58ms
 2>RTX 3080     [16] S: 15/0 [67 C/85%] 76.89 I/s 151.78(151.81)Sol/s 270(270.4)W clk=1575MHz mclk=9501MHz Sol/W=0.561
 3>RTX 3060 Ti  [17] S: 15/0 [67 C/91%]*44.55 I/s  88.46( 88.46)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.558
[ 0d 0h 3m20s|05:25:12 25/12/2022] S: 30/0/0 240(240.2)Sol/s 430(429.1)W- 36ms
 2>RTX 3080     [16] S: 15/0 [66 C/92%] 76.89 I/s 152.09(152.09)Sol/s 271(270.5)W clk=1575MHz mclk=9501MHz Sol/W=0.562
 3>RTX 3060 Ti  [17] S: 15/0 [67 C/91%] 44.55 I/s  88.21( 88.23)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.556

.......

[ 0d12h51m30s|18:13:22 25/12/2022] S: 30/0/0 241(242.4)Sol/s 431(430.6)W- 48ms
 2>RTX 3080     [16] S: 15/0 [66 C/90%] 76.89 I/s 152.57(153.43)Sol/s 271(271.8)W clk=1575MHz mclk=9501MHz Sol/W=0.564
 3>RTX 3060 Ti  [17] S: 15/0 [68 C/90%] 44.55 I/s  88.29( 88.91)Sol/s 159(159.0)W clk=1560MHz mclk=7000MHz Sol/W=0.559

--priority is still broken and not working at all, win10 with admin rights.

Hi somaton,

Thanks for the feedback.

Could you try again --priority with the new version v2.0c, and let us know if it is working well for you now?
Also, is the MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G already detected correctly?

Regarding the fee issue you mention, the log you show is not very informative.
It is best to always use --extra for more information. Maybe also --all-shares option.
Could you let us know which pool ?
We'll have a look at this.
Cheers

[miniZ]

Hi everyone,

A new miniZ version v2.0c is out with better support for ZIL mining (single/dual).

Added dag cache for ethash/progpow algos, improvements for RTX30XX for 192,7, and more…

Please find miniZ version v2.0c @ Download page.
 
Changelog:

* Added support for Zilliqa (ZIL) single and dual mining. (ZIL+ETC/ETH/UBQ) (No ZMP) (See FAQ for usage examples.)
* Added dag cache for ethash, and progpow algorithms.
* Improvements for 192,7 on RTX 30XX GPUs.
* Added --show-diff option to show job, and network (equihash only) difficulty.  
* Fixed Beam stale/invalid shares.
* Fixed priority option on Windows.
* Fixed CUDA API error 400 on progpow.

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Engage, feedback and support:

Because your feedback is very important, miniZ kindly encourages you to use the comment box on the website or this forum for feedback (questions, suggestions, requests...).

We wish you a fast and friendly mining experience!
 

[miniZ]

Hi everyone,

Our website is experiencing a few technical issues.
We're working to have it up again as soon as possible.

Meanwhile, you can contact us on Twitter or through this forum.

Also, you can use GitHub for downloading latest miniZ version.

Finally, as usual we keep working on a new miniZ miner version.
We added a few functionalities regarding ZIL+ mining.
Need a few days for testing. Should be out soon.

Thank you for your support and comprehension!
Cheers

[miniZ]

Hi everyone,

We're working to have miniz.ch up again.

However, you can already access miniZ website through
https://miniz.cc

Thank you for your support!
Cheers

[Ziv1]

How do I turn off mining on a card with a stuck fan (Alarm StopFan)
XXXX100% [78шC/ 0%]  4.48 I/s  8.6(17.9)Sol/s XXX

[Ziv1]

I clarify the question.
I don't want to end the whole mining process.
I want to disable mining of a specific video card via bat file.

[miniZ]

I clarify the question.
I don't want to end the whole mining process.
I want to disable mining of a specific video card via bat file.

Hi Ziv1,
You can use -cde option to exclude a GPU when starting the mining process.

Ex. --cuda-exclude=1,3,5
or -cde=1,3,5

Also compatible, space separated:
--cuda-exclude 1 3 5
or -cde 1 3 5

Cheers

[miniZ]

Hi everyone,

A new miniZ version v2.0c2 is out with support for ZIL+ all other miniZ algos, dual mining.

Please find the miniZ v2.0c2 version @ Download page.
 



Changelog:

* Added support for Zilliqa (ZIL)+ all miniZ algos mining.
    (See  FAQ How to mine Zilliqa (Zil)? for usage examples.)
* Fixed progpow issues with Polaris GPUs.
* Added support for RX 6500 XT (Navi 24 GPU). It should work with other Navi 24 GPUs.

  * * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Engage, feedback and support:

Because your feedback is very important, miniZ kindly encourages you to use the comment box on the website or this forum for feedback (questions, suggestions, requests...).

We wish you a fast and friendly mining experience!
 

[sxemini]

Hi everyone,

A new miniZ version v2.0c2 is out with support for ZIL+ all other miniZ algos, dual mining.

Please find the miniZ v2.0c2 version @ Download page.
 



Changelog:

* Added support for Zilliqa (ZIL)+ all miniZ algos mining.
    (See  FAQ How to mine Zilliqa (Zil)? for usage examples.)
* Fixed progpow issues with Polaris GPUs.
* Added support for RX 6500 XT (Navi 24 GPU). It should work with other Navi 24 GPUs.

  * * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Engage, feedback and support:

Because your feedback is very important, miniZ kindly encourages you to use the comment box on the website or this forum for feedback (questions, suggestions, requests...).

We wish you a fast and friendly mining experience!
 

So many thanks to you. I waited almost over 2 years for this feature   and you the first one (different equihash algos + zil)

[somaton]

192.7 worker name is lost sometimes for zergpool, but not always, here you can see how it looks (same rig, with few manual restarts for gpu freqs adjustments):

miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.1795565   22.4h/s   4
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.2   11.2h/s   0
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.13930256   22.4h/s   3
miniZ/2.0c 3700x   c=BTC   equihash192   0.2   11.2h/s   0

with 2.0c msi 3060 ti still detected as 3070:

************ miniZ v2.0c ************
Number of miniZ CUDA>=[.] using driver CUDA[11.30] devices found: 3
Driver:      466.77
Algo:      EQ[192,7] [smart-pers]
Pool#0:    user[1Lcc***************.5600x]
      server[equihash192.eu.mine.zergpool.com] port[2144] ssl[no] pers[auto]
Logging::    file[miniz-192.7-zerg.log] period[10] delay[0]
Temp. limit:   [90 C]
[INFO   ] Mining fee set to 2.00%
miniZ<192,7>[19:0:00.0: 7161]: Selecting GPU#2[2] MSI GeForce RTX 3070 8GB Gaming X Trio
miniZ<192,7>[19:0:00.0: 7132]: Selecting GPU#1[1] MSI GeForce RTX 3070
miniZ<192,7>[19:0:00.0: 7161]: Selecting GPU#0[0] ASUS GeForce RTX 3060 Ti
[ 0d 0h 0m09s|16:52:17 14/02/2023] S:  0/0/0 136(135.8)Sol/s 380(380.2)W [ZcashPoW]- 101ms
 0>RTX 3060 Ti  [19] S:  0/0 [62 C/56%] 19.09 I/s 38.08(38.08)Sol/s 114(113.5)W clk=1560MHz mclk=5000MHz Sol/W=0.335
 1>RTX 3070     [19] S:  0/0 [61 C/55%] 27.02 I/s 53.91(53.91)Sol/s 129(129.3)W clk=1560MHz mclk=5000MHz Sol/W=0.417
 2>RTX 3060 Ti  [19] S:  0/0 [62 C/35%] 21.98 I/s 43.84(43.84)Sol/s 137(137.4)W clk=1560MHz mclk=5000MHz Sol/W=0.319

[angelbbs]

How to specify the algorithm ethash and pool for dual zil mining? The FAQ page does not provide this information

[sxemini]

How to specify the algorithm ethash and pool for dual zil mining? The FAQ page does not provide this information

Is not needed and all is provided in the FAQ. Read carefully next time. Here is example commandline:

miniZ.exe --url=FLUX_Wallet.Worker_Name@eu-flux.fluxpools.net:7001 --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra

@miniZ

at the moment i have many bad share in dual mining mode flux+zil mode. I get this message every second. I have 21 accepted and 1600 bad shares after 30min with my test card. The pool hashrate is normal.

[angelbbs]

How to specify the algorithm ethash and pool for dual zil mining? The FAQ page does not provide this information

Is not needed and all is provided in the FAQ. Read carefully next time. Here is example commandline:

miniZ.exe --url=FLUX_Wallet.Worker_Name@eu-flux.fluxpools.net:7001 --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra

@miniZ

at the moment i have many bad share in dual mining mode flux+zil mode. I get this message every second. I have 21 accepted and 1600 bad shares after 30min with my test card. The pool hashrate is normal.

Ok, how to enable dual zil mining on Nicehash using daggerhashimoto server?
miniZ.exe --url=Wallet.Miner@zelhash.auto.nicehash.com:9200 --url=Wallet.Miner@daggerhashimoto.auto.nicehash.com:9200  dont work

[miniZ]

192.7 worker name is lost sometimes for zergpool, but not always, here you can see how it looks (same rig, with few manual restarts for gpu freqs adjustments):

miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.1795565   22.4h/s   4
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.2   11.2h/s   0
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.13930256   22.4h/s   3
miniZ/2.0c 3700x   c=BTC   equihash192   0.2   11.2h/s   0

with 2.0c msi 3060 ti still detected as 3070:

Hi somaton,
 
 We know this behavior with Zergpool.
 It is best to do as they suggest on the website: worker name goes with -p (--password) option  -p c=BTC,ID=Worker_Name.
 
 Regarding 3060Ti detection, could you check the new version v2.0c3? This version also fixes v2.0c2 issue with invalid shares.
 
 Thank you for the feedback!
 Cheers
 

[miniZ]

So many thanks to you. I waited almost over 2 years for this feature   and you the first one (different equihash algos + zil)

Is not needed and all is provided in the FAQ. Read carefully next time. Here is example commandline:

miniZ.exe --url=FLUX_Wallet.Worker_Name@eu-flux.fluxpools.net:7001 --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra

@miniZ

at the moment i have many bad share in dual mining mode flux+zil mode. I get this message every second. I have 21 accepted and 1600 bad shares after 30min with my test card. The pool hashrate is normal.

Hi sxemini, thanks for your patience and support :-)

Could you check version v2.0c3, it fixes issue with v2.0c2 invalid shares.
Let us know how it goes.
Cheers

[miniZ]

Ok, how to enable dual zil mining on Nicehash using daggerhashimoto server?
miniZ.exe --url=Wallet.Miner@zelhash.auto.nicehash.com:9200 --url=Wallet.Miner@daggerhashimoto.auto.nicehash.com:9200  dont work

Hi angelbbs,
Thanks for your message!

Could you try:
miniZ.exe --url=Wallet.Miner@zelhash.auto.nicehash.com:9200 --url=zil://Wallet.Miner@daggerhashimoto.auto.nicehash.com:9200

We're also having a look to see if this works. If so we'll update FAQ.
Cheers

[miniZ]

Hi everyone,

A new miniZ version v2.0c3 is out with with a fix for invalid shares issue on v2.0c2.

Please find the miniZ v2.0c3 version @ Download page.
 



Changelog:
* Fixed issue with invalid shares with v2.0c2.

* Added support for Zilliqa (ZIL)+ all miniZ algos mining.
    (See  FAQ How to mine Zilliqa (Zil)? for usage examples.)
* Fixed progpow issues with Polaris GPUs.
* Added support for RX 6500 XT (Navi 24 GPU). It should work with other Navi 24 GPUs.

  * * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Engage, feedback and support:

Because your feedback is very important, miniZ kindly encourages you to use the comment box on the website or this forum for feedback (questions, suggestions, requests...).

We wish you a fast and friendly mining experience!
 

[angelbbs]

Ok, how to enable dual zil mining on Nicehash using daggerhashimoto server?
miniZ.exe --url=Wallet.Miner@zelhash.auto.nicehash.com:9200 --url=Wallet.Miner@daggerhashimoto.auto.nicehash.com:9200  dont work

Hi angelbbs,
Thanks for your message!

Could you try:
miniZ.exe --url=Wallet.Miner@zelhash.auto.nicehash.com:9200 --url=zil://Wallet.Miner@daggerhashimoto.auto.nicehash.com:9200

We're also having a look to see if this works. If so we'll update FAQ.
Cheers

Thanks, it works fine, but getstat API responds wrong hashrate when zil mining active.

Code:

[ 0d 3h 8m10s] S: 38/1/1 121(132.0)MH/s 519(552.2)W [daggerhashimoto.auto.nicehash.com] (95.4%) (2.6%) (2.0%)
 0>RTX 3060       100% [52 C/30%]  25.41(25.90)MH/s 119(118.5)W clk=1872MHz mclk=8492MHz MH/W=0.219
 1>GTX 1070       100% [70 C/57%]  27.70(30.29)MH/s 135(132.9)W clk=1912MHz mclk=4303MHz MH/W=0.228
 2>GTX 1070      80.0% [62 C/52%]  27.56(30.21)MH/s 101(138.8)W clk=1985MHz mclk=4303MHz MH/W=0.218
 3>RTX 2070 SUPER  100% [61 C/46%]* 42.12(45.81)MH/s 165(162.2)W clk=2023MHz mclk=8142MHz MH/W=0.282

Code:

{"id":0, "method":"getstat", "error":null, "start_time":1676521924, "miner":"miniZ", "version":"2.0c3", "algorithm":"Equihash144,5", "pers":"zil", "current_server":"etchash.auto.nicehash.com:9200", "server_latency":102.8, "available_servers":2, "server_status":1, "result":[
{"gpuid":0, "cudaid":0, "busid":"0000:03:00.0", "name":"NVIDIA GeForce RTX 3060", "gpu_status":2, "solver":-1, "mode":17, "ocX":255, "temperature":52, "gpu_fan_speed":30, "gpu_power_usage":118.6, "gpu_clock_core_max":1940, "gpu_clock_memory":8642, "speed_sps0":55.29, "speed_sps":66.12, "speed_is":15.05, "accepted_shares":78, "rejected_shares":0, "start_time":1676521924},
{"gpuid":1, "cudaid":1, "busid":"0000:04:00.0", "name":"NVIDIA GeForce GTX 1070", "gpu_status":2, "solver":-1, "mode":10, "ocX":255, "temperature":69, "gpu_fan_speed":55, "gpu_power_usage":134.0, "gpu_clock_core_max":1937, "gpu_clock_memory":4303, "speed_sps0":40.69, "speed_sps":61.06, "speed_is":14.99, "accepted_shares":58, "rejected_shares":0, "start_time":1676521924},
{"gpuid":2, "cudaid":2, "busid":"0000:05:00.0", "name":"NVIDIA GeForce GTX 1070", "gpu_status":2, "solver":-1, "mode":10, "ocX":255, "temperature":64, "gpu_fan_speed":50, "gpu_power_usage":141.7, "gpu_clock_core_max":1971, "gpu_clock_memory":4303, "speed_sps0":40.25, "speed_sps":61.44, "speed_is":14.73, "accepted_shares":58, "rejected_shares":0, "start_time":1676521924},
{"gpuid":3, "cudaid":3, "busid":"0000:07:00.0", "name":"NVIDIA GeForce RTX 2070 SUPER", "gpu_status":2, "solver":-1, "mode":6, "ocX":255, "temperature":61, "gpu_fan_speed":46, "gpu_power_usage":163.8, "gpu_clock_core_max":2018, "gpu_clock_memory":8142, "speed_sps0":63.56, "speed_sps":93.18, "speed_is":21.32, "accepted_shares":117, "rejected_shares":1, "start_time":1676521924}]}

[sxemini]

Flux+Zil is not working für me. Crazypool don´t accept the zil shares, but miniZ miner share accepted  

Os Windows
Driver 522.25