miniZv2.3c Equihash144,5 125,4 210,9 150,5 192,7 Beam ProgPoW Ethash CFX KLS PYI

[daem0n]

Nice miner.

GTX 1060 3G - GMINER 1.10 - 1800 Core / 4100 Memory - 27~29 sol/s
GTX 1060 3G - MINIZ v1.0h - 1800 Core / 4100 Memory -  30~31 sol/s

GTX 1070 - GMINER 1.10 - 1700 Core / 4200 Memory - 47 sol/s
GTX 1070 - MINIZ v1.0h - 1700 Core / 4200 Memory - 50~51 sol/s

[1714793906]

1714793906

[topteam]

Hope it helpful for you and add --exit option (close miniZ when it crash)
Thanks

Hi topteam,
thanks for the logs, they were helpful. It should be fixed in the next version.
miniZ already exits when a crash happens. Could you clarify what you mean?

miniZ not exit when crash (just freeze) during ~2 minutes, after that my watchdog reboot the system

[fistsofgod]

sometimes system restarts on cuda errors, sometimes system freezes. is there anyway for miniz to auto restart system on cuda error before the windows hangs or do I need to use a hardware watchdog

[fistsofgod]

Code:

connect: No error
connect: No error
connect: No error

what this mean?
rig is accessing net fine but miner gives this error

[EPEMA]

Is it possible to disable text highlighting in the console? My windows 7 does not support this color coding

[miniZ]

miniZ not exit when crash (just freeze) during ~2 minutes, after that my watchdog reboot the system

sometimes system restarts on cuda errors, sometimes system freezes. is there anyway for miniz to auto restart system on cuda error before the windows hangs or do I need to use a hardware watchdog

Hi topteam, fistsofgod,
if the system gets unstable and the nvidia driver hangs, miniZ cannot exit. Also miniZ does not have permission to restart the system.
You have to use an external program that forces system restart.

Code:

connect: No error
connect: No error
connect: No error

what this mean?
rig is accessing net fine but miner gives this error

It means that, for some reason, the miner did not manage to connect to the pool, then it tries to reconnect.
miniZ continues mining for 3 minutes. When it reconnects, it will send pending shares, receive a new job, continue mining, and the message disapears.
The message may appear again if the connection is lost.

Is it possible to disable text highlighting in the console? My windows 7 does not support this color coding

Hi EPEMA,
in the next version the nocolor option will remove colors from the console (besides the logfile).
However, you can try and use another console. A few months ago, we tried ConEmu terminal emulator and it worked fine. There are others available, which should also work OK.
We mentioned this @ https://miniz.ch/usage/

Thanks everyone!
Cheers

[fistsofgod]

I get connect: no error repeatedly while I can use internet fine for other things. I have to restart computer for miner to work. It will never connect unless I shutdown the rig and start again. I'm not referring to restarting, but fully shutdown and power back up. Otherwise it will give error. This is only sometimes

[daem0n]

One of my rigs is always freezing

GTX 1060 3GB

[ERROR] miner#6 CUDA error 'out of memory' in func 'eq]AXRvjQ8Ah8]B5B8H'line 686[INFO]btg.suprnova.cc Disconnecting
[INFO]btg.suprnoca.cc Stopping miner
Segmentation fault

[miniZ]

I get connect: no error repeatedly while I can use internet fine for other things. I have to restart computer for miner to work. It will never connect unless I shutdown the rig and start again. I'm not referring to restarting, but fully shutdown and power back up. Otherwise it will give error. This is only sometimes

Thanks fistsofgod, we think we've got it. Try the new released version and let us know if is OK now.

One of my rigs is always freezing
GTX 1060 3GB
[ERROR] miner#6 CUDA error 'out of memory' in func 'eq]AXRvjQ8Ah8]B5B8H'line 686[INFO]btg.suprnova.cc Disconnecting
[INFO]btg.suprnoca.cc Stopping miner
Segmentation fault

Hi daemON,
to run full speed the GPU needs 2.7GB. If the available memory is near this value the miner may be trying to run full speed and crashes.
In the new version we made changes that should allow miniZ to detect better when there is not enough free memory, still it is better to free more GPU memory.

Thank you all!
Cheers

[miniZ]

Hi everyone,

Thank you for your feedback!

There is a new miniZ miner version v1.0i!
  * Minor speed improvements. (Mostly on GTX 1060 ~3%)
  * Improved efficiencies. (~2-3%)
  * Improved stability.
  * --latency (ping) is now calculated with shorter average period.
  * --nocolor option for no color in console. Now logfile is always no color.
  * Bug fixes.
  
 Hive OS support @ https://miniz.ch/2018/11/29/hive-os-support/

We added 2miners.com as default mining pool server. Usage information @ https://miniz.ch/2018/12/10/mining-on-2miners/.

Like the previous version, we added support for RTX 20xx GPUs (alpha stage). If you happen to try miniZ on these GPUs, give us feedback so that we can keep improving the miner.

For more information, download, and support check the website: https://miniz.ch/
Download miniZ miner here: https://miniz.ch/download/

Happy mining!

[topteam]

Good job!!! 

[daem0n]

I get connect: no error repeatedly while I can use internet fine for other things. I have to restart computer for miner to work. It will never connect unless I shutdown the rig and start again. I'm not referring to restarting, but fully shutdown and power back up. Otherwise it will give error. This is only sometimes

Thanks fistsofgod, we think we've got it. Try the new released version and let us know if is OK now.

One of my rigs is always freezing
GTX 1060 3GB
[ERROR] miner#6 CUDA error 'out of memory' in func 'eq]AXRvjQ8Ah8]B5B8H'line 686[INFO]btg.suprnova.cc Disconnecting
[INFO]btg.suprnoca.cc Stopping miner
Segmentation fault

Hi daemON,
to run full speed the GPU needs 2.7GB. If the available memory is near this value the miner may be trying to run full speed and crashes.
In the new version we made changes that should allow miniZ to detect better when there is not enough free memory, still it is better to free more GPU memory.

Thank you all!
Cheers

EthOS 1.3.2 + miniZ 1.0i = stable

I discovered the error, one graphic card gave problem in the rig.
I'm requesting RMA

[fistsofgod]

crashed on new version about 5 hours in. no cuda error log and no error in log files. dont know what happened.....

[S_Natural]

Miner is cool.
Please add API for the miner, like EWBF and Gminer 

[topteam]

Now exit when crash

Code:

[ 1d 5h50m31s] S:21980/4 738(737) [europe.equihash-hub.miningpoolhub.com]- 457ms (98.0%) (2.0%)
0>GTX 1070       [56°C/50%] 28.24 I/s 56.9(56.5) Sol/s 137.3W clk=1797MHz mclk=4452MHz Sol/W=0.41
1>GTX 1070       [50°C/50%] 28.69 I/s 57.8(57.2) Sol/s 137.6W clk=1847MHz mclk=4452MHz Sol/W=0.42
2>GTX 1070       [51°C/50%] 28.97 I/s 57.7(57.9) Sol/s 137.2W clk=1873MHz mclk=4452MHz Sol/W=0.42
3>GTX 1070       [47°C/50%] 28.81 I/s 58.2(57.5) Sol/s 136.6W clk=1847MHz mclk=4452MHz Sol/W=0.42
4>GTX 1070       [51°C/50%] 28.97 I/s 57.1(57.8) Sol/s 137.9W clk=1860MHz mclk=4452MHz Sol/W=0.42
5>GTX 1070 Ti    [44°C/50%] 32.62 I/s 64.9(65.1) Sol/s 137.8W clk=1784MHz mclk=4452MHz Sol/W=0.47
6>GTX 1070 Ti    [46°C/50%] 32.57 I/s 64.7(65.1) Sol/s 137.8W clk=1835MHz mclk=4452MHz Sol/W=0.47
7>GTX 1070 Ti    [52°C/50%] 32.06 I/s 64.5(64.1) Sol/s 137.6W clk=1771MHz mclk=4452MHz Sol/W=0.47
8>GTX 1070 Ti    [48°C/50%] 32.24 I/s 64.6(64.4) Sol/s 137.1W clk=1797MHz mclk=4452MHz Sol/W=0.47
9>GTX 1070 Ti    [52°C/50%] 32.44 I/s 64.6(64.8) Sol/s 136.4W clk=1797MHz mclk=4452MHz Sol/W=0.47
10>GTX 1070 Ti    [54°C/50%] 31.51 I/s 62.6(63.0) Sol/s 136.7W clk=1746MHz mclk=4452MHz Sol/W=0.46
11>GTX 1070 Ti    [49°C/50%] 31.90 I/s 64.2(63.8) Sol/s 137.3W clk=1759MHz mclk=4452MHz Sol/W=0.46
[ 1d 5h50m41s] S:21980/4 738(737) [europe.equihash-hub.miningpoolhub.com]- 457ms (98.0%) (2.0%)
0>GTX 1070       [56°C/50%] 28.24 I/s 57.1(56.5) Sol/s 137.3W clk=1784MHz mclk=4452MHz Sol/W=0.41
1>GTX 1070       [50°C/50%] 28.69 I/s 57.5(57.2) Sol/s 137.6W clk140516465309320:error:1409F07F:SSL routines:ssl3_write_pending:bad write retry:s3_pkt.c:1097:
kernel: [236254.039744] show_signal_msg: 18 callbacks suppressed
kernel: [236254.039748] miniZ[8725]: segfault at 7fccd8034530 ip 00007fccd8034530 sp 00007fcc84ff3918 error 15
8675 Segmentation fault      (core dumped) ./miniZ --url user.rig1@europe.equihash-hub.miningpoolhub.com:20595 --pers BgoldPoW --par=144,5 --telemetry 0 --gpu-line --extra --nocolor --templimit 70C --tempunits C --latency
Main process exited, code=exited, status=139/n/a
Unit entered failed state.
Failed with result 'exit-code'.
Service hold-off time over, scheduling restart.
Stopped miner.
Started miner.
************ #033[01;31mminiZ#033[0m v1.0i ************
Number of CUDA devices found: 12

need more stability

[miniZ]

Good job!!! 

There is a new miniZ miner version v1.0i!

Thanks

Thanks for your feedback and encouragement!

[miniZ]

EthOS 1.3.2 + miniZ 1.0i = stable

I discovered the error, one graphic card gave problem in the rig.
I'm requesting RMA

Hi daem0n,
thank you for letting us know!

[miniZ]

crashed on new version about 5 hours in. no cuda error log and no error in log files. dont know what happened.....

Now exit when crash

Code:

[ 1d 5h50m31s] S:21980/4 738(737) [europe.equihash-hub.miningpoolhub.com]- 457ms (98.0%) (2.0%)
0>GTX 1070       [56°C/50%] 28.24 I/s 56.9(56.5) Sol/s 137.3W clk=1797MHz mclk=4452MHz Sol/W=0.41
1>GTX 1070       [50°C/50%] 28.69 I/s 57.8(57.2) Sol/s 137.6W clk=1847MHz mclk=4452MHz Sol/W=0.42
2>GTX 1070       [51°C/50%] 28.97 I/s 57.7(57.9) Sol/s 137.2W clk=1873MHz mclk=4452MHz Sol/W=0.42
3>GTX 1070       [47°C/50%] 28.81 I/s 58.2(57.5) Sol/s 136.6W clk=1847MHz mclk=4452MHz Sol/W=0.42
4>GTX 1070       [51°C/50%] 28.97 I/s 57.1(57.8) Sol/s 137.9W clk=1860MHz mclk=4452MHz Sol/W=0.42
5>GTX 1070 Ti    [44°C/50%] 32.62 I/s 64.9(65.1) Sol/s 137.8W clk=1784MHz mclk=4452MHz Sol/W=0.47
6>GTX 1070 Ti    [46°C/50%] 32.57 I/s 64.7(65.1) Sol/s 137.8W clk=1835MHz mclk=4452MHz Sol/W=0.47
7>GTX 1070 Ti    [52°C/50%] 32.06 I/s 64.5(64.1) Sol/s 137.6W clk=1771MHz mclk=4452MHz Sol/W=0.47
8>GTX 1070 Ti    [48°C/50%] 32.24 I/s 64.6(64.4) Sol/s 137.1W clk=1797MHz mclk=4452MHz Sol/W=0.47
9>GTX 1070 Ti    [52°C/50%] 32.44 I/s 64.6(64.8) Sol/s 136.4W clk=1797MHz mclk=4452MHz Sol/W=0.47
10>GTX 1070 Ti    [54°C/50%] 31.51 I/s 62.6(63.0) Sol/s 136.7W clk=1746MHz mclk=4452MHz Sol/W=0.46
11>GTX 1070 Ti    [49°C/50%] 31.90 I/s 64.2(63.8) Sol/s 137.3W clk=1759MHz mclk=4452MHz Sol/W=0.46
[ 1d 5h50m41s] S:21980/4 738(737) [europe.equihash-hub.miningpoolhub.com]- 457ms (98.0%) (2.0%)
0>GTX 1070       [56°C/50%] 28.24 I/s 57.1(56.5) Sol/s 137.3W clk=1784MHz mclk=4452MHz Sol/W=0.41
1>GTX 1070       [50°C/50%] 28.69 I/s 57.5(57.2) Sol/s 137.6W clk140516465309320:error:1409F07F:SSL routines:ssl3_write_pending:bad write retry:s3_pkt.c:1097:
kernel: [236254.039744] show_signal_msg: 18 callbacks suppressed
kernel: [236254.039748] miniZ[8725]: segfault at 7fccd8034530 ip 00007fccd8034530 sp 00007fcc84ff3918 error 15
8675 Segmentation fault      (core dumped) ./miniZ --url user.rig1@europe.equihash-hub.miningpoolhub.com:20595 --pers BgoldPoW --par=144,5 --telemetry 0 --gpu-line --extra --nocolor --templimit 70C --tempunits C --latency
Main process exited, code=exited, status=139/n/a
Unit entered failed state.
Failed with result 'exit-code'.
Service hold-off time over, scheduling restart.
Stopped miner.
Started miner.
************ #033[01;31mminiZ#033[0m v1.0i ************
Number of CUDA devices found: 12

need more stability

Hi fistsofgod, topteam,
Sorry about this. We know how frustrating these crashes can be. Unfortunately we have not been able to reproduce this so it is hard to fix it.
We updated miniZ to v1.0i+, with some modifications. Hopefully this one will fix this.
If you can, drop us a message telling how it goes.
There is only one logfile now, all the errors go the the logfile.
Thank you!
Cheers

[miniZ]

Miner is cool.
Please add API for the miner, like EWBF and Gminer  

Hi S_Natural,
Thanks! miniZ already has an API. Check telemetry https://miniz.ch/telemetry/ , and json API.

Example (Linux):

Code:

curl --silent rig2:20000 -X '{"id":"0", "method":"getstat"}'

returns:
{"id":0, "method":"getstat", "error":null, "start_time":1544548916, "current_server":"zhash.eu.nicehash.com:3369", "server_latency":62.4, "available_servers":1, "server_status":1, "result":[{"gpuid":0, "cudaid":0, "busid":"busid", "name":"GeForce GTX 1050", "gpu_status":2, "solver":-1, "temperature":66, "gpu_fan_speed":35, "gpu_power_usage":75.0, "gpu_clock_core_max":1695, "gpu_clock_memory":3504, "speed_sps":16.1, "accepted_shares":23, "rejected_shares":0, "start_time":1544548916},{"gpuid":1, "cudaid":1, "busid":"busid", "name":"GeForce GTX 1050 Ti", "gpu_status":2, "solver":-1, "temperature":71, "gpu_fan_speed":38, "gpu_power_usage":75.0, "gpu_clock_core_max":1594, "gpu_clock_memory":3504, "speed_sps":18.6, "accepted_shares":22, "rejected_shares":0, "start_time":1544548916},{"gpuid":2, "cudaid":2, "busid":"busid", "name":"GeForce GTX 1070 Ti", "gpu_status":2, "solver":-1, "temperature":69, "gpu_fan_speed":49, "gpu_power_usage":172.1, "gpu_clock_core_max":1759, "gpu_clock_memory":3802, "speed_sps":59.0, "accepted_shares":69, "rejected_shares":0, "start_time":1544548916}]}

Cheers!

[fistsofgod]

that's my bad, i thought i had logging on.  on another note, 1.0i and i+ produced ~+34 sol/s for ~+10 watts. love the efficiency, @ .57sol/W+ at the card.

1.0i+ creates logfiles but nothing is inside them. win10 pro
--logfile whatever.log