miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 28, 2019, 03:19:52 PM |
|
Good day. I have a farm with a GPU of 1060 3GB mined. BTCZ used EWBF's Cuda Equihash Miner 0.6. The farms worked stably for several months. I installed miniZ 1.2l on 6 farms (W10 1607 DRV-391.01 cuda 8 overclocking settings are the same) From 21.03.19-27.03.19, 2 farms work stably, the rest fail 1-2 times per day. The failure analysis file is attached. I ask you to correct the calculation of the Share number not to include Share-fee.serv. Thanks for your work.
Hi Ziv1, We are sorry about the frequent crash. Did you try to adjust the OC settings? It is likely that you need to do this. Different miners behave differently. They can consume distinct system resources, so you may need to adapt the OC when pushing up your cards with each new miner. With no OC, does the miner crashes as well? Also, when you run miniz with --log you get an output log to the file miniZ.log. In this file what is the message error (if any)? Thanks. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 28, 2019, 03:23:04 PM |
|
miniZ Any way to add failover pools? In best way - failover coins/pools combination.
Hi abudfv2008, you can add as many pools as you like. You can specify for different coins, however they must be of the same algorithm. Also, if the personalisation string is different (usually it is) you must write --pers auto. This will work if all the pools support 'auto'. Ex for mining ZelCash and BitcoinZ: miniZ.exe --url=YourWallet.Worker@zel.2miners.com:9090 --url=YourWallet.Worker@eu.voidr.net:4001 --log --pers auto Or do not specify --pers at all and check if miniZ guessed correctly. Ex for mining ZelCash and BitcoinZ: miniZ.exe --url=YourWallet.Worker@mine-btcz-euro.equipool.1ds.us:50063 --url=YourWallet.Worker@mine-zel-euro.equipool.1ds.us:50053 --log One of these options will work for most pools, otherwise let us know. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 28, 2019, 03:24:17 PM |
|
Is 150_5 in the pipeline ? Thx.
Hi ARTRN, not for the next release. (v1.2m coming soon) But, we are considering that option for the release after ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 28, 2019, 04:44:25 PM |
|
Good day. There is no information about the miner's failure in the log file. I could not determine the miniZ state (the monitoring indicators of GPUZ video cards indicate that mining stops) If the program had stopped the program, the registry command stopped it (special registry setting), but this the window with a proposal to close the program hangs on the screen. If the program closes it and restarts (setting the bat) without problems until the next stop.
|
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 29, 2019, 08:53:52 PM |
|
Good day. There is no information about the miner's failure in the log file. I could not determine the miniZ state (the monitoring indicators of GPUZ video cards indicate that mining stops) If the program had stopped the program, the registry command stopped it (special registry setting), but this the window with a proposal to close the program hangs on the screen. If the program closes it and restarts (setting the bat) without problems until the next stop.
Hi Ziv1, thanks for the feedback. In stock settings (no OC), does the miner crash as well? It would be nice to know if the miner crashes because of a Cuda error or of some other reason. It can be that you need to adjust the OC for those farms. In any case we are working to improve stability for the next version. (v1.2m should be out next week) Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2019, 07:28:11 AM |
|
Good day. I do not quite understand (without OS) without MSIAfterburner — this is a problem because of the power supply (designed for optimal load with maximum efficiency-PL <= 70). From experience, a cuda crash requires restarting windows. In our case, just press Enter and restart the miner. I would like to know from you the optimal settings MSIAfterburner for miniZ (GPU 1060 3GB). According to information from the event log, the miniZ stop is preceded by the launch of the Microsoft-Windows-Security-Auditing process. C: \ Windows \ System32 \ services.exe (a few seconds before miniZ crashes in the application log) Thank.
|
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2019, 07:00:43 PM |
|
Good day. I do not quite understand (without OS) without MSIAfterburner — this is a problem because of the power supply (designed for optimal load with maximum efficiency-PL <= 70). From experience, a cuda crash requires restarting windows. In our case, just press Enter and restart the miner. I would like to know from you the optimal settings MSIAfterburner for miniZ (GPU 1060 3GB). According to information from the event log, the miniZ stop is preceded by the launch of the Microsoft-Windows-Security-Auditing process. C: \ Windows \ System32 \ services.exe (a few seconds before miniZ crashes in the application log) Thank.
Hi Ziv1, Ok. We understand. On our 1060 3GB setting PL=70% (84W), core = +210 and memory = -125 in afterburner runs stable. With these settings, and running miniZ with --f11=0, we get 34.8 Sol/s. What values are you using? We share some values for 144,5 here https://miniz.ch/1445-2/ , however values tend to be different for different systems. Also, others have also reported what numbers they use. For an older miniZ version see for example https://bitcointalk.org/index.php?topic=4767892.msg48620229#msg48620229Let us know if this helped. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 01, 2019, 06:16:08 AM |
|
Good day. With your AB settings, nothing has changed. Please specify what your system is - assembly, updates. What services are disabled-stopped. Thank.
|
|
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2019, 02:01:30 PM |
|
Good day. With your AB settings, nothing has changed. Please specify what your system is - assembly, updates. What services are disabled-stopped. Thank.
Hi Ziv1, sorry about this crash. We are struggling to find out what might be the cause. We generally use Linux. We do run 390.48 driver on that GPU, on Linux, cuda 8 version. However, we suspect now that the problem might not be the OC. Are you using a monitoring software? Could you try running miniZ with --telemetry=0? This disables telemetry. Does it help? Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2019, 02:04:52 PM |
|
Hi JFoxOne, thanks a lot for the feedback and for letting miniZ be part of your nice project! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) We are about to make a new release with improved efficiencies. Stay tuned! Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2019, 05:50:48 AM |
|
Good day. The --telemetry = 0 or (--telemetry =0) parameter does not manifest itself in the log. I would expect a stable version under W10. Thank.
|
|
|
|
Ziv1
Newbie
Offline
Activity: 25
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2019, 11:45:50 AM |
|
Good day. There was an interesting crash. Mining time decreased by an hour and a permanent session fee.server started. Good luck.
2>GTX 1060 3GB `99.7% [55шC/48%] 17.97 I/s 35.8(35.9)Sol/s 82( 87.3)W clk=1797MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [55шC/48%] 17.65 I/s 35.0(35.1)Sol/s 92( 87.4)W clk=1784MHz mclk=4404MHz Sol/W=0.40 [ 0d14h38m36s] S:1167/6 143(141.8)Sol/s 353(349.8)W [btcz.2miners.com]- 76ms (98.0%) (2.0%) 0>GTX 1060 3GB `99.0% [54шC/45%] 17.57 I/s 35.7(35.1)Sol/s 88( 87.2)W clk=1771MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%] 17.88 I/s 36.0(35.7)Sol/s 90( 87.7)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%] 17.97 I/s 36.0(35.9)Sol/s 86( 87.3)W clk=1809MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [56шC/50%] 17.65 I/s 34.9(35.1)Sol/s 88( 87.4)W clk=1759MHz mclk=4404MHz Sol/W=0.40 [ 0d14h38m46s] S:1167/6 143(141.8)Sol/s 347(349.7)W [btcz.2miners.com]- 76ms (98.0%) (2.0%) 0>GTX 1060 3GB `99.0% [55шC/45%] 17.57 I/s 35.6(35.1)Sol/s 85( 87.2)W clk=1771MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%] 17.88 I/s 36.0(35.7)Sol/s 88( 87.7)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%] 17.97 I/s 35.8(35.9)Sol/s 89( 87.3)W clk=1797MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [56шC/50%] 17.65 I/s 34.9(35.1)Sol/s 86( 87.4)W clk=1784MHz mclk=4404MHz Sol/W=0.40 [ 0d14h38m56s] S:1167/6 143(141.8)Sol/s 342(349.4)W [fee.server]- 75ms (98.0%) (2.0%) 0>GTX 1060 3GB `99.0% [55шC/48%] 17.57 I/s 35.6(35.1)Sol/s 84( 87.2)W clk=1733MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%] 17.88 I/s 36.0(35.7)Sol/s 84( 87.7)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%] 17.97 I/s 35.9(35.9)Sol/s 90( 87.3)W clk=1797MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [55шC/48%] 17.65 I/s 35.4(35.1)Sol/s 84( 87.4)W clk=1759MHz mclk=4404MHz Sol/W=0.40 [ 0d13h39m04s] S:1169/6 144(141.8)Sol/s 345(349.4)W [fee.server]- 76ms (105.2%) (-5.2%) 0>GTX 1060 3GB `99.0% [54шC/45%] 17.57 I/s 35.5(35.1)Sol/s 85( 87.2)W clk=1746MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%]*17.88 I/s 35.7(35.7)Sol/s 83( 87.7)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%] 17.97 I/s 36.5(35.9)Sol/s 91( 87.3)W clk=1797MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [55шC/48%] 17.65 I/s 35.8(35.1)Sol/s 85( 87.4)W clk=1759MHz mclk=4404MHz Sol/W=0.40 [ 0d13h39m14s] S:1172/6 144(141.8)Sol/s 348(349.5)W [fee.server]- 76ms (105.2%) (-5.2%) 0>GTX 1060 3GB `99.0% [54шC/48%]*17.57 I/s 35.5(35.1)Sol/s 86( 87.2)W clk=1746MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%] 17.88 I/s 36.2(35.7)Sol/s 80( 87.6)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%]*17.97 I/s 35.8(35.9)Sol/s 92( 87.3)W clk=1797MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [55шC/48%] 17.65 I/s 35.9(35.1)Sol/s 90( 87.4)W clk=1784MHz mclk=4404MHz Sol/W=0.40 [ 0d13h39m24s] S:1174/6 144(141.8)Sol/s 339(349.1)W [fee.server]- 76ms (105.1%) (-5.1%) 0>GTX 1060 3GB `99.0% [54шC/45%] 17.57 I/s 35.5(35.1)Sol/s 89( 87.2)W clk=1771MHz mclk=4404MHz Sol/W=0.40 1>GTX 1060 3GB `99.6% [55шC/48%] 17.88 I/s 36.1(35.7)Sol/s 80( 87.6)W clk=1784MHz mclk=4404MHz Sol/W=0.41 2>GTX 1060 3GB `99.7% [55шC/48%]*17.97 I/s 35.8(35.9)Sol/s 85( 87.3)W clk=1784MHz mclk=4404MHz Sol/W=0.41 3>GTX 1060 3GB `99.7% [55шC/50%]*17.65 I/s 35.7(35.1)Sol/s 86( 87.4)W clk=1759MHz mclk=4404MHz Sol/W=0.40
|
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2019, 01:31:15 PM |
|
Good day. There was an interesting crash. Mining time decreased by an hour and a permanent session fee.server started. Good luck.
Hi Ziv1 thanks a lot for the feedback. This was quite important to improve miniZ. We think we managed to fix what was causing your crashes It looks this was related to clock adjustments. Please try the new version v1.2m. This version has other additional improvements. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) You can download it here https://miniz.ch/download/Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2019, 03:08:43 PM |
|
Hi everyone thank you for staying with us. Your feedback really matters. miniZ is growing better in each version. There is a new miniZ miner version v1.2m! * Speed improvements for 144,5 and 192,7. Major boost for RTX GPUs.* Fee shares excluded from statistics. * --show-pers to show personalization string. * --smart-pers to use personalization string ‘auto’ if available, otherwise use specified pers. For compatibility with Mining Rig Rentals. * --show-solratio to show number of solutions per iteration. * --oc1/--oc2 for boost in performance when applying OCs to GPUs.* Help with new look. Run miniZ.exe --nocolor --help to exclude colors (Win7). * Improved stability. * Minor bug fixes. Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best. Hive OS supportFor more information, download, and support check the website: https://miniz.ch/FAQ and UsageDownload miniZ miner here: https://miniz.ch/download/Follow us TwitterHappy mining!
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
topteam
Newbie
Offline
Activity: 157
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2019, 06:01:05 AM Last edit: April 05, 2019, 08:22:02 PM by topteam |
|
Thanks With --oc2 boost ~2% on 144,5 S:6300/17 769(769.5)Sol/s 1612(1636.2)W [europe.equihash-hub.miningpoolhub.com,BgoldPoW]- 304ms (98.0%) (2.0%) 0>GTX 1070 `S:455/2 [55°C/55%] 29.39 I/s 59.7(58.6)Sol/s 141(138.0)W clk=1784MHz mclk=4452MHz Sol/W=0.42 2.00 Sol/I 1>GTX 1070 `S:402/2 [53°C/50%] 29.66 I/s 59.1(59.2)Sol/s 140(137.8)W clk=1809MHz mclk=4452MHz Sol/W=0.43 2.00 Sol/I 2>GTX 1070 `S:393/0 [52°C/50%] 29.76 I/s 58.5(59.4)Sol/s 139(136.7)W clk=1822MHz mclk=4452MHz Sol/W=0.43 2.00 Sol/I 3>GTX 1070 `S:398/1 [48°C/50%] 30.23 I/s 60.0(60.4)Sol/s 132(138.0)W clk=1835MHz mclk=4452MHz Sol/W=0.44 2.00 Sol/I 4>GTX 1070 `S:410/2 [51°C/50%] 30.19 I/s 60.4(60.3)Sol/s 109(138.1)W clk=1835MHz mclk=4452MHz Sol/W=0.44 2.00 Sol/I 5>GTX 1070 Ti `S:444/1 [43°C/50%] 34.09 I/s 67.8(68.1)Sol/s 139(136.0)W clk=1784MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 6>GTX 1070 Ti `S:472/1 [45°C/50%] 33.93 I/s 67.3(67.6)Sol/s 138(135.2)W clk=1784MHz mclk=4452MHz Sol/W=0.50 1.99 Sol/I 7>GTX 1070 Ti `S:452/0 [51°C/50%] 33.59 I/s 66.6(67.0)Sol/s 136(135.6)W clk=1759MHz mclk=4452MHz Sol/W=0.49 2.00 Sol/I 8>GTX 1070 Ti `S:414/1 [49°C/50%] 33.79 I/s 67.4(67.6)Sol/s 139(136.2)W clk=1771MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 9>GTX 1070 Ti `S:504/4 [52°C/50%]*34.07 I/s 68.6(68.1)Sol/s 132(134.9)W clk=1797MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 10>GTX 1070 Ti `S:454/3 [55°C/55%] 33.03 I/s 66.3(65.9)Sol/s 129(135.8)W clk=1708MHz mclk=4452MHz Sol/W=0.49 2.00 Sol/I 11>GTX 1070 Ti `S:462/0 [49°C/50%] 33.58 I/s 66.2(67.2)Sol/s 137(135.3)W clk=1759MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I
please remove symbol ` when --nocolor option use
|
|
|
|
AcharyaOne
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2019, 11:32:34 AM |
|
Hi everyone thank you for staying with us. Your feedback really matters. miniZ is growing better in each version. There is a new miniZ miner version v1.2m! * Speed improvements for 144,5 and 192,7. Major boost for RTX GPUs.* Fee shares excluded from statistics. * --show-pers to show personalization string. * --smart-pers to use personalization string ‘auto’ if available, otherwise use specified pers. For compatibility with Mining Rig Rentals. * --show-solratio to show number of solutions per iteration. * --oc1/--oc2 for boost in performance when applying OCs to GPUs.* Help with new look. Run miniZ.exe --nocolor --help to exclude colors (Win7). * Improved stability. * Minor bug fixes. Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best. Hive OS supportFor more information, download, and support check the website: https://miniz.ch/FAQ and UsageDownload miniZ miner here: https://miniz.ch/download/Follow us TwitterHappy mining! Could you please enable the setting on your profile of receiving messages from newbies?
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2019, 12:28:37 PM |
|
Good miner with good speeds, but why so overloaded and difficult to read console output? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.sergei.pp.fi%2Fminiz.jpg&t=665&c=DffDcdMKco75kw)
|
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2019, 02:29:02 PM |
|
Thanks With --oc2 boost ~2% on 144,5 S:6300/17 769(769.5)Sol/s 1612(1636.2)W [europe.equihash-hub.miningpoolhub.com,BgoldPoW]- 304ms (98.0%) (2.0%) 0>GTX 1070 `S:455/2 [55°C/55%] 29.39 I/s 59.7(58.6)Sol/s 141(138.0)W clk=1784MHz mclk=4452MHz Sol/W=0.42 2.00 Sol/I 1>GTX 1070 `S:402/2 [53°C/50%] 29.66 I/s 59.1(59.2)Sol/s 140(137.8)W clk=1809MHz mclk=4452MHz Sol/W=0.43 2.00 Sol/I 2>GTX 1070 `S:393/0 [52°C/50%] 29.76 I/s 58.5(59.4)Sol/s 139(136.7)W clk=1822MHz mclk=4452MHz Sol/W=0.43 2.00 Sol/I 3>GTX 1070 `S:398/1 [48°C/50%] 30.23 I/s 60.0(60.4)Sol/s 132(138.0)W clk=1835MHz mclk=4452MHz Sol/W=0.44 2.00 Sol/I 4>GTX 1070 `S:410/2 [51°C/50%] 30.19 I/s 60.4(60.3)Sol/s 109(138.1)W clk=1835MHz mclk=4452MHz Sol/W=0.44 2.00 Sol/I 5>GTX 1070 Ti `S:444/1 [43°C/50%] 34.09 I/s 67.8(68.1)Sol/s 139(136.0)W clk=1784MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 6>GTX 1070 Ti `S:472/1 [45°C/50%] 33.93 I/s 67.3(67.6)Sol/s 138(135.2)W clk=1784MHz mclk=4452MHz Sol/W=0.50 1.99 Sol/I 7>GTX 1070 Ti `S:452/0 [51°C/50%] 33.59 I/s 66.6(67.0)Sol/s 136(135.6)W clk=1759MHz mclk=4452MHz Sol/W=0.49 2.00 Sol/I 8>GTX 1070 Ti `S:414/1 [49°C/50%] 33.79 I/s 67.4(67.6)Sol/s 139(136.2)W clk=1771MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 9>GTX 1070 Ti `S:504/4 [52°C/50%]*34.07 I/s 68.6(68.1)Sol/s 132(134.9)W clk=1797MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I 10>GTX 1070 Ti `S:454/3 [55°C/55%] 33.03 I/s 66.3(65.9)Sol/s 129(135.8)W clk=1708MHz mclk=4452MHz Sol/W=0.49 2.00 Sol/I 11>GTX 1070 Ti `S:462/0 [49°C/50%] 33.58 I/s 66.2(67.2)Sol/s 137(135.3)W clk=1759MHz mclk=4452MHz Sol/W=0.50 2.00 Sol/I
please remove symbol ` when --nocolor option Hi topteam, welcome back ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks, good to know that --oc's are working well! We'll remove the ` in the next release. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2019, 02:31:16 PM |
|
Could you please enable the setting on your profile of receiving messages from newbies?
Hi AcharyaOne, it is enabled now. You can also contact us through our website. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
|