mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
|
July 31, 2018, 08:31:38 PM Last edit: November 11, 2018, 11:50:08 PM by mrb |
|
Edit: I think the screenshot showing "A3207" is a typo, and is meant to read "A3206". Edited the topic to reflect that. Looks like redtheminer spilled the beans first: https://twitter.com/redtheminer/status/1024307705006022657
- Product: AvalonMiner A9 series
- Speed: 26.5TH/s - 30TH/s
- Power: 1720 W (typical)
- Energy efficiency: 0.06~0.07 J/GH
- Chip: A3207 7nm ASIC
- Fan: 1x 14038 fan
- Note: Subject to changes(translation?)
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3780
Merit: 2681
Evil beware: We have waffles!
|
|
July 31, 2018, 08:38:56 PM |
|
Sweet. Will be interesting to see the pricing of it. Along these lines, wonder if Blokforge.com upgraded my recent order for an APW3++ to the 1,800w APW7 (for free) because they know I'll be getting some of these. Safe bet Blokforge knew about these coming out and being the superb company they are them giving the free upgrade would not surprise me in the least
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
July 31, 2018, 08:44:12 PM |
|
|
|
|
|
toptek12
Member
Offline
Activity: 126
Merit: 10
|
|
July 31, 2018, 09:05:47 PM |
|
I wonder if they will get the power usage down more over time not that it matters it doesn't i have solar i can run three of those in my house with no issue the only pain i see is the noise level those fans do 61 Db .. but id like to see the power usage go down as the th goes up that would be nicer to see . but they beat out the one i linked from Blokforge.com some place that maxes out at 33 th i think it was and usages close to 4 k WATS at max, i think it was that claimed to be 7nm due in Nov 2018 . The GMO miner B3 33TH/S miner Blokforge has as a per order. but the A9 looks like it can be better.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8639
'The right to privacy matters'
|
|
August 01, 2018, 12:51:17 AM |
|
the pangolin M10 is 33,000 gh at 2145 or 65 watts a th
don't know if it has speed settings like the avalon 841 has
the avalon a9 is 26,500 at 1,720 = 64.9 watts a th
don't know if it has speed settings but reads 26,500 to 30,000
I would love to set it to 1720 watts as 3 fit on a 30 amp 240 volt nicely doing 5160
So
Avalon ..... A9 ...........................64.9 watts Pangolin.... M10 .........................65.0 watts Innosilicon. T2 Turbo................... 71.0 watts GMO......... forgot the name......... 82.0 watts BitMain...... S9 .......................... 100 watts
all per th
So bitmain keeps selling the cheap s9's til ?
I am looking forward to getting some avalons asap
|
|
|
|
Raymond_B
Member
Offline
Activity: 504
Merit: 71
Just Getting Started...
|
|
August 01, 2018, 12:55:37 AM |
|
I wonder if the Avalon will still have the 30 deg C limit? Is that due to only being a single fan?
|
|
|
|
Shazam!!!
Full Member
Offline
Activity: 350
Merit: 158
#takeminingback
|
|
August 01, 2018, 01:05:54 AM |
|
I wonder if the Avalon will still have the 30 deg C limit? Is that due to only being a single fan?
I'm not entirely sure if this issue was resolved, but I thought it was firmware related. I've run my 841's all summer at 32°c to 41°c with no issues. Pushed high one day to 42°c and I dropped them to the -1 offset. Either way, I'm "all in" waiting for this release. Great company!!!
|
Click these links to learn some truth about Big Corporate mining pools stealing your money and centralizing BTCitcoin!!! Help support the BTCitcoin community!!! Mine your BTCitcoin at a non-Corporate pool!!! BTC: 1ShazamjsPnpWDNnk3n2tAiKGMdXaSjay
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
August 01, 2018, 01:17:42 AM Last edit: August 01, 2018, 11:10:31 AM by frodocooper |
|
I'm not entirely sure if this issue was resolved, but I thought it was firmware related. I've run my 841's all summer at 32°c to 41°c with no issues. Pushed high one day to 42°c and I dropped them to the -1 offset.
Either way, I'm "all in" waiting for this release. Great company!!!
Same, up to 40C here ambient with mediocre exhaust still . . not recommended though. Have to watch my PSU's not my avalons at these temps I'm seeing though summer now. Fun day for announcements, glad Canaan will be ready for market soon. Was there word on pricing? 26-30th/s is broad range for them though. Speculation on end result and wattage? Thanks for the break down philipma, always appreciated.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8639
'The right to privacy matters'
|
|
August 01, 2018, 01:38:07 AM |
|
They run at 40 c but drop efficiency 841's do this.
30c they are more efficient
but -1 or -2 settings help efficiency .
This year we had 1 hot week and my 841's ran in 92f 95f 97f 94f days with zero issues ... both the s9's and t1's dropped boards with those temps
|
|
|
|
ccgllc
Copper Member
Full Member
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
|
August 01, 2018, 02:18:00 AM |
|
Interesting to note that 1720 watts is right up against the power limit for running (2) on a 220V 20amp circuit continuouosly.
20 amps /2 = 10 amps * 80% max = 8 amps * 220V = 1760Watts.
Nice design point!
|
Mined for a living since 2017. Dabbled for years before that. Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8639
'The right to privacy matters'
|
|
August 01, 2018, 02:21:34 AM |
|
Interesting to note that 1720 watts is right up against the power limit for running (2) on a 220V 20amp circuit continuouosly.
20 amps /2 = 10 amps * 80% max = 8 amps * 220V = 1760Watts.
Nice design point!
yeah works for 10 amp circuits =rare 20 amp common 30 amp common 50 amp less common would really like a mini version 13000gh and 850 watts but that is not going to happen.
|
|
|
|
mgoz
|
|
August 01, 2018, 01:33:56 PM |
|
I have seen recent activity on the Avalon 851 firmware and guessing it's probably for this unless they are releasing a slower model first like they did with the 821. Hopefully you'll be able to chain these with the 8's. So bitmain keeps selling the cheap s9's til ?
I'd guess that they are just waiting to shit on the competition. If they already have something similar or more efficient, they could sell it at 2x's current S9 price and still be cheaper than everyone else.
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3780
Merit: 2681
Evil beware: We have waffles!
|
|
August 01, 2018, 02:35:46 PM Last edit: August 01, 2018, 09:07:33 PM by frodocooper Merited by frodocooper (1) |
|
Hopefully you'll be able to chain these with the 8's.
Why? Is a bad idea... As with the 7 & 8's the miners will be using different firmware and unless ran at default settings will no doubt want different Vcore voltage/offset tweaks. Even mixing within 1 family is not a good idea, aside from the tweaks, if you update firmware ALL miners on the controller are updated to it. Trust me: a 721 does not like thinking it just became a 741.-- been there, done that and fortunately was easy to back out of. Same for the 8's. RasPi's are cheap so it is best to just take the most sensible course
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8639
'The right to privacy matters'
|
|
August 01, 2018, 03:09:32 PM Last edit: August 01, 2018, 09:08:18 PM by frodocooper |
|
Why? Is a bad idea... As with the 7 & 8's the miners will be using different firmware and unless ran at default settings will no doubt want different Vcore voltage/offset tweaks. Even mixing within 1 family is not a good idea, aside from the tweaks, if you update firmware ALL miners on the controller are updated to it. Trust me: a 721 does not like thinking it just became a 741.-- been there, done that and fortunately was easy to back out of. Same for the 8's. RasPi's are cheap so it is best to just take the most sensible course
yeah 3 avalon long chains are close to bullet proof. that is 12 per rasp pi. and a rasp pi can be built for under 80 dollars https://www.amazon.com/CanaKit-Raspberry-Starter-Premium-Black/dp/B07BCC8PK7/ref=sr_1_1_sspa?so pick up a few of them. it only runs into a big expense if you go to a 1200 miner build as 105 at 80 = 8040 if you go to this level you should consider a server that does more the 4 usb ports. chains that a rasp pi does. chains of 5 have a bit more errors then chains of 4 which have a bit more errors then chains of 3 which are close to error free.
|
|
|
|
mgoz
|
|
August 01, 2018, 03:46:10 PM |
|
Why? Is a bad idea...
Mainly so I don't have to add a switch, more controllers, cabling, and create more points of failure. I fully understand the issues with upgrading firmware and that under/overclocking settings will apply to all units. I run on default settings and currently mix 821 and 841 units without issues.
|
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
|
August 01, 2018, 07:50:17 PM Last edit: August 01, 2018, 09:10:44 PM by frodocooper |
|
|
|
|
|
Thetaj
|
|
August 02, 2018, 10:41:07 AM |
|
Looking forward to this
|
|
|
|
Steamtyme
Legendary
Offline
Activity: 1554
Merit: 2037
|
Hmmm.
Now I have to find somewhere to Install another 30 amp circuit.
Can't wait to see if this offers the same flexibility in voltage settings. They've been a lifesaver running the 841 during the hot summer.
Maybe they'll bundle 3 together and sell them like the "moose", call it the "deer". A nice home miner setup.
|
░░░░░▄▄██████▄▄ ░░▄████▀▀▀▀▀▀████▄ ░███▀░░░░░░░░░░▀█▀█ ███░░░▄██████▄▄░░░██ ░░░░░█████████░░░░██▌ ░░░░█████████████████ ░░░░█████████████████ ░░░░░████████████████ ███▄░░▀██████▀░░░███ █▀█▄▄░░░░░░░░░░▄███ ░░▀████▄▄▄▄▄▄████▀ ░░░░░▀▀██████▀▀
| Ripmixer ░░░░░▄▄██████▄▄ ░░▄████▀▀▀▀▀▀████▄ ░███▀░░░░░░░░░░▀█▀█ ███░░░▄██████▄▄░░░██ ░░░░░█████████░░░░██▌ ░░░░█████████████████ ░░░░█████████████████ ░░░░░████████████████ ███▄░░▀██████▀░░░███ █▀█▄▄░░░░░░░░░░▄███ ░░▀████▄▄▄▄▄▄████▀ ░░░░░▀▀██████▀▀
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
August 02, 2018, 07:19:56 PM Last edit: August 02, 2018, 09:24:32 PM by frodocooper |
|
Hmmm.
Now I have to find somewhere to Install another 30 amp circuit.
Can't wait to see if this offers the same flexibility in voltage settings. They've been a lifesaver running the 841 during the hot summer.
Maybe they'll bundle 3 together and sell them like the "moose", call it the "deer". A nice home miner setup.
That would be nice, so a 30A 240v will run three? Maybe I'll wait on some upgrades if this is the case.
|
|
|
|
mgoz
|
|
August 02, 2018, 08:13:50 PM |
|
so a 30A 240v will run three?
Listed wattage would put you around 21.5 amps for 3 units and 14.3 amps for 2 units.
|
|
|
|
|