[ANN] Noncetech - Sales Closed. Price drop soon.

[cyberspaced]

I would describe the noise as something from a quiet vacuum cleaner.

That's kinda subjective! A real measurement in dB would be nice, a video of the measurement even better!!

[Noncetech]

I would describe the noise as something from a quiet vacuum cleaner.

That's kinda subjective! A real measurement in dB would be nice, a video of the measurement even better!!

We will measure the dB tomorrow. We think it is something customers should know.

[nonlinearboy]

That's kinda subjective! A real measurement in dB would be nice, a video of the measurement even better!!
yeah ,really need it!

[Noncetech]

The video of the dB measurement will be uploaded in a few hours.

[Noncetech]

The dB values are in!

For 1 mining card, the dB level was 64.4dB.

For 4 mining cards, the dB level was 69.8 dB.

The measures were taken from a 50cm distance in a 28m² rectangular room. The mining cards were not in a chassis, which would decrease the dB levels.


1 mining card on:
http://i57.tinypic.com/2vmaefk.jpg


4 mining cards on:
http://i57.tinypic.com/51v5fl.jpg

[crazu]

Here's a picture taken from BTCguild pool with Sampo 1T miner.
https://i.imgur.com/UUuqlyF.jpg


Here's some test result info for Sampo 1T.
https://i.imgur.com/RuE0xb2.png

-Noncetech

[ManeBjorn]

Looks great.
Is there any room for overclocking or are the chips already pushed to the max on the 1 th/s unit?

Here's a picture taken from BTCguild pool with Sampo 1T miner.


Here's some test result info for Sampo 1T.


-Noncetech

[crazu]

CoinCraft A1 chips can be pushed up to 33GH/s as the Bitmine.ch site itself states. This will put put a board up to ~260GH/s making Sampo 1T go 1040GH/s- on the turbo mode the chips are set approximately at 31.5GH/s a piece. The power usage and board component temperatures start increasing rather fast as you get closer to the high end values. This is because you'll have to run the chips with higher voltage to keep avoiding hardware errors.

In short, there's room to push it higher but the advantage gained is questionable.

[crazu]

BTC Only four Sampo beta mining cards remain before they're sold out BTC These are ready to ship immediately once payment is completed. http://noncetech.com/products-page/

Also I recommend people checking the news article about us on cryptocoinsnews http://www.cryptocoinsnews.com/news/noncetech-announces-official-miner-sales-launch/2014/04/09 . There's a little something for anyone who's thinking of buying a new rig home. On another note, do ask and comment us about everything and anything related to our products! We're trying to have a constant surveillance on this thread and all of the feedback is valuable to us.

To tackle the issue pointed out earlier of not having pictures from a third party we've sent out one of our Sampo cards to the community's very own dogie! The card should arrive to him by Monday and the review/setup guide will be up when he has the time to make it.

Our own setup and user guides will be up on our website soon as well.

-Noncetech

[Noncetech]

Hello miners!

There is less than 24 hours left to pre-order our product and be one of the first to have our product in your hands! Now is your chance to be part of future history.

On another note, we are listed on the great list of bitcoin miners:
https://coinplorer.com/Hardware

In terms of speed/$ our Sampo mining card comes 8th! Disregarding products that are not available and the ASIC, we are 4th!

Quick link to sales:
http://noncetech.com/products-page/

[dogie]

Dogie's Comprehensive Noncetech Sampo Setup Guide now up!

[nexus99]

Isn't a competitive price for 1TH $2,500? And a good price for 1 TH $2,000? 3,500 is really high.

[nexus99]

Hello miners!

There is less than 24 hours left to pre-order our product and be one of the first to have our product in your hands! Now is your chance to be part of future history.

On another note, we are listed on the great list of bitcoin miners:
https://coinplorer.com/Hardware

In terms of speed/$ our Sampo mining card comes 8th! Disregarding products that are not available and the ASIC, we are 4th!

Quick link to sales:
http://noncetech.com/products-page/

I like how Coinplorer has BA listed as available. And almost non of the shipping A1 companies are there.

[Noncetech]

Isn't a competitive price for 1TH $2,500? And a good price for 1 TH $2,000? 3,500 is really high.

I guess you are comparing our products at least with the S1.

Did you compare our prices with any other products?

[bobsag3]

Isn't a competitive price for 1TH $2,500? And a good price for 1 TH $2,000? 3,500 is really high.

I guess you are comparing our products at least with the S1.

Did you compare our prices with any other products?

The dragon miner 1th are ~2700-2800, 800gh avalon g3 ~2300. Available this week.

[antirack]

Is this project still alive?

https://coinplorer.com/hardware mentions a shipping date of May 5 (today).

[ManeBjorn]

Yes it is.
They are going to be announcing new pricing very soon.

Is this project still alive?

https://coinplorer.com/hardware mentions a shipping date of May 5 (today).

[ChuckBuck]

Isn't a competitive price for 1TH $2,500? And a good price for 1 TH $2,000? 3,500 is really high.

I guess you are comparing our products at least with the S1.

Did you compare our prices with any other products?

The dragon miner 1th are ~2700-2800, 800gh avalon g3 ~2300. Available this week.

The Antminer S2 is also $2199 with the $400 coupons they rained on all their customers.

[dogie]

This company's rating has changed in the Manufacturer Trustworthiness Guide.