[ANN] Best sgminer so far for x25x/lyra2Z/phi2/allium/lyra2REv3/yescrypt on AMD

[fancyIX]

Recently, a new coin called a Grin has appeared. She has a new hash algorithm, Cuckoo Cycle PoW. Perhaps you would be interested to add it to your miner?
https://bitcointalk.org/index.php?topic=5090427.0

Already filed an issue for that: https://github.com/fancyIX/sgminer-phi2-branch/issues/150

Personally I don't like that coin just because their logo looks so unprofessional.
Also, I cannot see a direct benefit of applying cross lane instructions to do the shuffling. But will spend more time on it.

[fancyIX]

Supports Windows and Linux. Supports windows driver and Linux AMDGPU Pro driver. Supports most cards. Comes with pre-built binary kernels to speed up Ellesmere and Vega cards.


https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b

Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs

I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.

Beta5 release, about 30% faster
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5

Beta5b release:
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5b
Speed compare of release (beta5b) than previous release (beta5): 580 +25%, Vega56 +35% for phi2, and 580 -15%, Vega56 +35% for lyra2Z .

Beta5c release, added allium support. Others are the same as beta5b.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5c

Beta5d release, much faster than beta5c, especially for 580.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5d

Beta 5e release, now support x22i. Others keep the same as beta5d:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Will improve the performance further.

Beta5f release. x22i over 25% faster than beta5e, lyra2rev2 over 4x faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f+ release, for x22i, 580 5% faster, Vega56 15% faster. ADL added so that you can monitor your GPU. https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f++: little bit faster. https://github.com/fancyIX/sgminer-phi2-branch/releases

Windows version may hang. If so, please revisit the release page and download the fixed file.

Beta5f++++ release, vega 10% faster. 580 improved a bit, for x22i.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5fp5 release, x22i around 5% faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5gp1 release, lyra2REv3 support. Comes with prebuilt bin kernels for better performance.
Estimated speed: Vega56 64mhs, 580 41mhs.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5gp1

Beta5gp3 release, added lyra2Zz support.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beat5h release, starts to support ethash:
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5hp1, starts to support argon2d. Maybe a little bit faster or slower than Dynamic-GPU-Miner-AMD
https://github.com/fancyIX/sgminer-phi2-branch/releases

[Tervolt]

Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg

[fancyIX]

Supports Windows and Linux. Supports windows driver and Linux AMDGPU Pro driver. Supports most cards. Comes with pre-built binary kernels to speed up Ellesmere and Vega cards.


https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b

Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs

I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.

Beta5 release, about 30% faster
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5

Beta5b release:
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5b
Speed compare of release (beta5b) than previous release (beta5): 580 +25%, Vega56 +35% for phi2, and 580 -15%, Vega56 +35% for lyra2Z .

Beta5c release, added allium support. Others are the same as beta5b.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5c

Beta5d release, much faster than beta5c, especially for 580.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5d

Beta 5e release, now support x22i. Others keep the same as beta5d:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Will improve the performance further.

Beta5f release. x22i over 25% faster than beta5e, lyra2rev2 over 4x faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f+ release, for x22i, 580 5% faster, Vega56 15% faster. ADL added so that you can monitor your GPU. https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f++: little bit faster. https://github.com/fancyIX/sgminer-phi2-branch/releases

Windows version may hang. If so, please revisit the release page and download the fixed file.

Beta5f++++ release, vega 10% faster. 580 improved a bit, for x22i.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5fp5 release, x22i around 5% faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5gp1 release, lyra2REv3 support. Comes with prebuilt bin kernels for better performance.
Estimated speed: Vega56 64mhs, 580 41mhs.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5gp1

Beta5gp3 release, added lyra2Zz support.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beat5h release, starts to support ethash:
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5hp1, starts to support argon2d. Maybe a little bit faster or slower than Dynamic-GPU-Miner-AMD
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5i, added mtp support (still under testing)
https://github.com/fancyIX/sgminer-phi2-branch/releases

[GKumaran]

Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.

As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096

[Tervolt]

Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg

As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096

Understand. Thanks.

[fancyIX]

Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.

As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096

Right...Don't have time to work on other variants.

[Drakyla]

Fancy , Nicehash added Lyra2Rev3 however since i know them too well .. there is probably some issue with the miners (dont have GPu right now to test it) . If you have 1 can you check it out ? (They added Grin and Beam too ... but with different requirements and such). usually on their github there is explanation (for beam and grin exist one with instructions) however for Lyra2rev3 there is nothing yet .

Regards

[fancyIX]

Fancy , Nicehash added Lyra2Rev3 however since i know them too well .. there is probably some issue with the miners (dont have GPu right now to test it) . If you have 1 can you check it out ? (They added Grin and Beam too ... but with different requirements and such). usually on their github there is explanation (for beam and grin exist one with instructions) however for Lyra2rev3 there is nothing yet .

Regards

Can you provide the link to that sgminer?

Edit:
Never mind. Seems like you'd like me to run this miner on nicehash pool

[Drakyla]

Kinda . I was guessing you have GPU in hand . I`ll test it myself later on today and will write if there is any issues with the shares .

[kostepanych2]

Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?

[fancyIX]

Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?

As a work around, you can put the command in a while loop so that it restarts after crash

[VasilyS]

Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?

Try to decrease intensity and put in BAT-file of the miner argument -g 1. This miner is working even with RX460 4 Gb, but hashrate is ridiculous.

[kokodesu]

Even if you specify GPU to use with -d with mtp, why everything moves.

Also, although it may be said that it is under test, the speed starts without problems even at the beginning,
but when interrupted occurs, it is only rejected.
Environment RX570x8Gx5, RX580x8Gx2, RX570x4Gx1 (because it can not be excluded)

[kostepanych2]

Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?

As a work around, you can put the command in a while loop so that it restarts after crash

Can you please write an example of bat file?

Try to decrease intensity and put in BAT-file of the miner argument -g 1. This miner is working even with RX460 4 Gb, but hashrate is ridiculous.

What does -g 1 option do?

[fancyIX]

Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?

As a work around, you can put the command in a while loop so that it restarts after crash

Can you please write an example of bat file?

Something like
//=======================

:while1
if 1 (
    sgminer ......
    goto :while1
)

//=======================

Try to decrease intensity and put in BAT-file of the miner argument -g 1. This miner is working even with RX460 4 Gb, but hashrate is ridiculous.

What does -g 1 option do?

[iRonNuke]

I did try your miner with a bunch of RX 550's and 560's with algo Lyra2Rev3. Was getting very low hashrates 4 MH/s @ 550 and 8.4ish @ 560. It is only optimized for 570 and above or why did I get low hashrate? With another miner I get like 9/18 MH/s. Other than that it worked well, submited shares.

I also tried it at NiceHash Lyra2Rev3 pool and got "Share above target".

[fancyIX]

Even if you specify GPU to use with -d with mtp, why everything moves.

Also, although it may be said that it is under test, the speed starts without problems even at the beginning,
but when interrupted occurs, it is only rejected.
Environment RX570x8Gx5, RX580x8Gx2, RX570x4Gx1 (because it can not be excluded)

I think you can wait for a while and it will eventually start accepting again.
And I tried "-d" it works for me.

[fancyIX]

I did try your miner with a bunch of RX 550's and 560's with algo Lyra2Rev3. Was getting very low hashrates 4 MH/s @ 550 and 8.4ish @ 560. It is only optimized for 570 and above or why did I get low hashrate? With another miner I get like 9/18 MH/s. Other than that it worked well, submited shares.

I also tried it at NiceHash Lyra2Rev3 pool and got "Share above target".

I think it's optimized for 560, But you need to set "-I 24" to run the optimized bin kernel.

[kokodesu]

Even if you specify GPU to use with -d with mtp, why everything moves.

Also, although it may be said that it is under test, the speed starts without problems even at the beginning,
but when interrupted occurs, it is only rejected.
Environment RX570x8Gx5, RX580x8Gx2, RX570x4Gx1 (because it can not be excluded)

I think you can wait for a while and it will eventually start accepting again.
And I tried "-d" it works for me.

Excuse me. -d It moved. Finally, putting -d did not move, moved in the middle, it moved.

Also, let's move on rejected after interrupted and make sure.
Thank you.