(Review/Guide) WhatsMiner M10 33.0 Th/s, 2145W Bitcoin (SHA-256) ASIC miner

[philipma1957]

I ordered an m10 today it is the 31th version 799 -20 = 779 + 95 to ship to usa = 874

maybe 27.6 tax =  1115

I wonder how tax will be handled this ships soon I will update on it.

[1715169240]

1715169240

[1715169240]

1715169240

[minefarmbuy]

Duties should only be applied to the unit cost not shipping. Who's your shipping service?

[philipma1957]

I have two m10 they do 34th  each and use 2400 watts each.

The 31th model is due on wed 2nd. Dhl is shipping it.

[minefarmbuy]

Yea, the 31T version at pricing now should be moving like hot cakes for single units entering US.

[HagssFIN]

@philipma1957

Cool, nice and fast shipping. 

[philipma1957]

It arrived and I hooked it up.

I will post numbers in an hour.

I suggest you order 1 unit. If you are USA based.

34 th model and 31th model

the new 31th is doing 32th so far!

[Asthix]

What's the room temperature for those screen?

[HagssFIN]

@philipma1957

That's a great result

Btw I can see in the graphic user interface this thing --> Work Mode - Normal

Is there a way to choose a performance mode in this new firmware version?

Like for example Eco, Normal, Turbo etc.

[philipma1957]

What's the room temperature for those screen?

low 80's say 83f

... Btw I can see in the graphic user interface this thing --> Work Mode - Normal

Is there a way to choose a performance mode in this new firmware version?

Like for example Eco, Normal, Turbo etc.

new modes normal  = yes

eco?
performance ?

did not notice I will check

does not seem to be a way to change modes

[philipma1957]

found low power mode!

I will give meter readings etc later today

[HagssFIN]

@philipma1957

Very cool find!

So my inital guess was right.

[philipma1957]

yes.  here is what it mines on low power

note fans are 2700 and hash is 20.5th

it is not really loud.

I will get back with an efficiency number

watt better reads 1303 watts at 20800 or about 62.5 watts a th

based on t15 results this new 31th m10 model with low power to high power setting

may be a tiny bit better price is 799 for m10 31th model
price for t15 is 840

[Biffa]

Phil, unless I missed it, whats the power reading at 31/32TH?

[philipma1957]

Phil, unless I missed it, whats the power reading at 31/32TH?

2250/31500 normal  = 71.4 watts a th

1290/21500 low      = 59 watts a th


I would like to be able to put the new firmware on my 33/34th models

as the 58-61 watts a th is very nice

[HagssFIN]

Wow, the power efficiency number for the low power mode is pretty nice.

And it is 16nm tech..!

[Biffa]

2250/31500 normal  = 71.4 watts a th

1290/21500 low      = 59 watts a th


I would like to be able to put the new firmware on my 33/34th models

as the 58-61 watts a th is very nice

Thanks

[Steamtyme]

Those numbers are great for a real world application.

Done waiting around to see what Canaan puts out for an 941 type model. I've been holding off on pulling the trigger, but I might grab 1 or 2 of these bad boys. Try to get them in the house and ROI quickly.

[minefarmbuy]

Yea, any db read on these phil or fanatic?

[philipma1957]

Yea, any db read on these phil or fanatic?

low power is manageable s-9 at mid speed mode.
 

high power is loud. s-9 when it was running in loud mode.

Don't have any t15 or s15.

So far the m10 31th is good.

 I had 1  m10 33th liked it order a second one

I had 2 m10 33 th like the two ordered a 31th

I now run 2 m10 33th and 1 m10 31th.  I like these 3 so much I ordered a fourth m10 the 31th

So I will soon have 34+34+31.5+31.5 = 131 th with 4 machines

[Raymond_B]

Phil, the 31TH you picked up is the one for $799.00 currently correct?