cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 01:38:51 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren?
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 24, 2017, 02:40:21 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren? da die Datei bereits existiert, würde ich einmal einfach weiter machen...
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 02:50:15 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren? da die Datei bereits existiert, würde ich einmal einfach weiter machen... ok. und welche befehle folgen danach?
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 24, 2017, 02:52:01 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren? da die Datei bereits existiert, würde ich einmal einfach weiter machen... ok. und welche befehle folgen danach? # ensure using the right version of qt cd /home/pi/masternodecoin export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently Wink
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 02:59:33 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren? da die Datei bereits existiert, würde ich einmal einfach weiter machen... ok. und welche befehle folgen danach? # ensure using the right version of qt cd /home/pi/masternodecoin export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently Wink das ist mir schon klar. ich meinte, welche befehle nach den die schon oben aufgelistet sind
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 24, 2017, 03:12:43 PM |
|
Mach mal so weiter und lösche den Masternode Ordner... # I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/" # Get MasterNodeCoin sources from github and compile it cd /home/pi mkdir masternodecoin cd masternodecoin git clone https://github.com/masternodecoin/masternodecoin.git . # these scripts need to be executable chmod +x src/leveldb/build_detect_platform chmod +x src/secp256k1/autogen.sh # workaround because lrelease is not working on raspi - it never starts... # so qmake would never end. we just create a dummy executable which does nothing sudo touch dummy.sh sudo chmod +x dummy.sh sudo mv dummy.sh /usr/bin/ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease # ensure using the right version of qt export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently ok. hab den masternodecoin ordner gelöscht und fange von vorne an bei sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease kommt diese meldung pi@raspberrypi:~/masternodecoin $ sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease ln: die symbolische Verknüpfung „/usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease“ konnte nicht angelegt werden: Die Datei existiert bereits pi@raspberrypi:~/masternodecoin $
ist das so richtig bzw. relevant für den weiteren verlauf oder kann ich das so ignorieren? da die Datei bereits existiert, würde ich einmal einfach weiter machen... ok. und welche befehle folgen danach? # ensure using the right version of qt cd /home/pi/masternodecoin export QT_SELECT=qt5 # Now we can build the MasterNodeCoin-QT binary ... qmake make # compile.. this will take ages, wait patiently Wink das ist mir schon klar. ich meinte, welche befehle nach den die schon oben aufgelistet sind Danach über Tightserver oder direkt über Desktop die Wallet starten cd /home/pi/masternodecoin ./Masternodecoin-qt
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 03:20:18 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0".
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 24, 2017, 03:29:11 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht?
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 03:33:46 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 24, 2017, 03:53:53 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 24, 2017, 03:58:12 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 25, 2017, 06:42:35 AM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 26, 2017, 04:48:41 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten Ich bin zum testen zwar noch nicht gekommen, aber versuche es einmal so, ohne kopieren und löschen.... cd /home/pi # Build the library and install to /usr/local cd db-4.8.30.NC/build_unix/ ../dist/configure --prefix=/usr/local --enable-cxx make -j4 # compile on 4 cores sudo make install # copy compiled files to /usr/local
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/"
cd /home/pi/masternodecoin qmake make
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 26, 2017, 04:58:51 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten Ich bin zum testen zwar noch nicht gekommen, aber versuche es einmal so, ohne kopieren und löschen.... cd /home/pi # Build the library and install to /usr/local cd db-4.8.30.NC/build_unix/ ../dist/configure --prefix=/usr/local --enable-cxx make -j4 # compile on 4 cores sudo make install # copy compiled files to /usr/local
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/"
cd /home/pi/masternodecoin qmake make
pi@raspberrypi:~/db-4.8.30.NC/build_unix $ make -j4 # compile on 4 cores make: Nothing to be done for 'all'. ist das so richtig?
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 26, 2017, 05:17:20 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten Ich bin zum testen zwar noch nicht gekommen, aber versuche es einmal so, ohne kopieren und löschen.... cd /home/pi # Build the library and install to /usr/local cd db-4.8.30.NC/build_unix/ ../dist/configure --prefix=/usr/local --enable-cxx make -j4 # compile on 4 cores sudo make install # copy compiled files to /usr/local
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/"
cd /home/pi/masternodecoin qmake make
pi@raspberrypi:~/db-4.8.30.NC/build_unix $ make -j4 # compile on 4 cores make: Nothing to be done for 'all'. ist das so richtig? Ja sollte genau so passen, compiliere gerade eine "chaincoin" Masternode, und da habe ich das genau so genommen... Für eine Masternode, muss ich den TCP und UDP Port der Masternode freigeben? Also NAT (eingehend) auf die jeweilige IP des Raspberrys?
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 26, 2017, 05:25:59 PM |
|
der gleiche fehler weiterhin... terminal spuckt mir u.a. das zum schluss raus: Qt: XKEYBOARD extansion not present on the X server. Xlib: extension "RANDR" missing on display ":1.0". Das kommt sowieso das sind keine Fehler, und das Wallet startet nicht? nein, der gleiche fehler wie bei dir damals Hmm, mal sehen ob ich noch wo nen Pi rumliegen habe... einer von den 6 muss ja noch wo sein... dann versuche ich die Installation noch einmal von ganz von vorne ok. mach das bitte und berichte dann. denn bisjetzt läuft die mtnc wallet auf meinem laptop und die mn geht immer automatisch nach knapp einer stunde immer off - weiß auch nicht warum - muss es immer neu starten Ich bin zum testen zwar noch nicht gekommen, aber versuche es einmal so, ohne kopieren und löschen.... cd /home/pi # Build the library and install to /usr/local cd db-4.8.30.NC/build_unix/ ../dist/configure --prefix=/usr/local --enable-cxx make -j4 # compile on 4 cores sudo make install # copy compiled files to /usr/local
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on export LD_LIBRARY_PATH="/usr/local/lib/"
cd /home/pi/masternodecoin qmake make
pi@raspberrypi:~/db-4.8.30.NC/build_unix $ make -j4 # compile on 4 cores make: Nothing to be done for 'all'. ist das so richtig? Ja sollte genau so passen, compiliere gerade eine "chaincoin" Masternode, und da habe ich das genau so genommen... Für eine Masternode, muss ich den TCP und UDP Port der Masternode freigeben? Also NAT (eingehend) auf die jeweilige IP des Raspberrys? also, ich hab nach dem vorgang immer noch den gleichen fehler.... für meinen masternode habe ich am router den port über TCP freigegeben. läuft nun ohne zu disconnecten - aber halt nur auf dem laptop
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 26, 2017, 05:27:37 PM |
|
der Pi compiliert ohne Fehler fertig?
Dieses Paket auch installiert:
sudo apt-get install at-spi2-core
Edit: lösche unter /home/pi das ./masternodecoin verzeichnis ncoh einmal und starte die Wallet noch einmal...
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 26, 2017, 05:35:53 PM |
|
der Pi compiliert ohne Fehler fertig?
Dieses Paket auch installiert:
sudo apt-get install at-spi2-core
Edit: lösche unter /home/pi das ./masternodecoin verzeichnis ncoh einmal und starte die Wallet noch einmal...
bei der compilierung gabs keine fehler. at-spi2-core habe ich jetzt nochmal nachinstalliert. wallet hatte trotzdem noch den fehler. jetzt habe ich den kompletten masternodecoin ordner gelöscht jetzt weider ne dumme frage von mir... wie installiere ich die wallet wieder?
|
|
|
|
Buchi-88
Legendary
Online
Activity: 3934
Merit: 2633
|
|
September 26, 2017, 05:48:32 PM |
|
der Pi compiliert ohne Fehler fertig?
Dieses Paket auch installiert:
sudo apt-get install at-spi2-core
Edit: lösche unter /home/pi das ./masternodecoin verzeichnis ncoh einmal und starte die Wallet noch einmal...
bei der compilierung gabs keine fehler. at-spi2-core habe ich jetzt nochmal nachinstalliert. wallet hatte trotzdem noch den fehler. jetzt habe ich den kompletten masternodecoin ordner gelöscht jetzt weider ne dumme frage von mir... wie installiere ich die wallet wieder? Nicht installieren, hast du den mastercoin Ordner oder den ./mastercoin Ordner gelöscht? Mfg
|
|
|
|
cygan
Legendary
Offline
Activity: 3290
Merit: 8575
icarus-cards.eu
|
|
September 26, 2017, 05:51:30 PM |
|
der Pi compiliert ohne Fehler fertig?
Dieses Paket auch installiert:
sudo apt-get install at-spi2-core
Edit: lösche unter /home/pi das ./masternodecoin verzeichnis ncoh einmal und starte die Wallet noch einmal...
bei der compilierung gabs keine fehler. at-spi2-core habe ich jetzt nochmal nachinstalliert. wallet hatte trotzdem noch den fehler. jetzt habe ich den kompletten masternodecoin ordner gelöscht jetzt weider ne dumme frage von mir... wie installiere ich die wallet wieder? Nicht installieren, hast du den mastercoin Ordner oder den ./mastercoin Ordner gelöscht? Mfg ? hab nur den /home/pi/masternodecoin ordner einen anderen sehen ich nicht...
|
|
|
|
|