Antminer T9+ Mod Eco FREE POWER : FULL FREE

[thierry4wd]

No I can not ... this is a setting ONLY for me ... depending on your environment and your fan it could cause you a lot of trouble! so sorry ...

Ps : you are tested this ? what your consuption at what frequency at your wall ?

[geolyk]

I will test it today. I don't care about the power . I only need silence . The miner is outside .but is noise.  I have put a firmware atm with dev fee . But is doing up and down the fan speed every time is going to my pool and dev pool . So from silence to noise and back again

i tested

but i see that one temp sensor is not working? Temp(Chip1)   all are 0
fans are 3000  rpms and 4200 rpms
temp on chip2 is 90 max

[thierry4wd]

hi , temp(chip1) show all 0 is normal , is bad code on original firmware ... i have "coded" a correctif for this if you interessed

Normaly, with my Bmminer, your miner is running with lower noise compare to original bitmain (or custom) ... you confirme this ?

[geolyk]

my miner is still noise....i cant make it more silence? i dont care if is running on lower h/s i want the fan to be arround 3000rpms

cant understand why this is so noise ...i have l3+ and d3 and there realy silent

[thierry4wd]

thank you for your share!

You try it ? please return your experience and your power at wall

[emran6630]

Can anyone reupload this file? I cant download it.

Download:
http://www.k-upload.fr/afficher-fichier-2018-11-17-1cfabf3eabmminert9eco.zip.html

[rre_za]

Hi everyone, I decided to share my Bmminer edit for T9+ (and tested), here are the mods:

- Reduction of the consumption of 300W approximately !!!
- Delete Pic Flash ERROR (now working)
- Custom Fan Management, run with VERY LOWEST NOISE !!!

The usual procedure:
Rename the Bmminer Bmminer-Old in / USR / BIN to be able to restore it if needed .... Then replace it with mine, do not forget to give it the right to execution "RWXR-XR-X"

Download:
http://www.k-upload.fr/afficher-fichier-2018-11-17-1cfabf3eabmminert9eco.zip.html

All the reviews and your comments are welcome !!!!!!
And for a small donation do no hesitate to contact me in PV

Thanks !!!

link is not working.

[thierry4wd]

Hi , my "mod" is now expired, no contain AsicBoost, no interest at this time...

Now bitmain release T9+ 2019 firmware with multi option and eco mode, is very good for T9+ (only close SSH port is bad) , i thinks not better existing mod for eco ... 10.5TH at arround 950w ... is very good for T9+ ...

Thanks for interesting by my mod 

[rre_za]

Hi , my "mod" is now expired, no contain AsicBoost, no interest at this time...

Now bitmain release T9+ 2019 firmware with multi option and eco mode, is very good for T9+ (only close SSH port is bad) , i thinks not better existing mod for eco ... 10.5TH at arround 950w ... is very good for T9+ ...

Thanks for interesting by my mod 

t9+ with 2019 firmware achieves 10.5TH around 950w !?
thats very nice

[thierry4wd]

But warning, is not possible to downgrade after upgrade... return to original firmware is not possible !!!! (but only possible, for easy, with SdCard)

  with pleasure