|
rockmoney (OP)
|
 |
November 18, 2018, 05:28:31 PM
Last edit: April 24, 2019, 05:44:09 PM by rockmoney Merited by klintay (10), leowonderful (3) |
|
########################################
# GekkoScience Product SALES Thread #
########################################
★★★ ANNOUNCING THE 1Th/s+ GekkoScience R606 USB POD MINER ★★★
★NOW AVAILABLE VIA AMAZON PRIME - https://amzn.to/2ZtE7Nu ★
★ USA Pre-Orders Now Accepted via FIRST COME, FIRST SERVE BASIS! A MINIMUM $50 PAYMENT IS REQUIRED TO GUARANTEE YOUR MINER! ★
TO RESERVE YOUR 1st BATCH R606 POD MINER:
★Please Send MINIMUM DEPOSIT of $50 USD - $300.00 USD via PayPal friends/family to newpacs@yahoo.com, then send a message to rockmoney with your PayPal Transaction ID Number & Shipping Address★
ALL OFFICIAL GekkoScience Re-Sellers (as can be seen on ANN Thread) will receive the FIRST BATCH PRODUCTION UNITS AT THE SAME TIME, & ALL Orders With MinersSupply will be shipped the SAME DAY!
Pre-Order special until 4/20/19 - FREE FedEx Expedited shipping!
There will be a very small first production run, and pre-sale orders will be shipped on a first come, first serve basis! The first run is limited to USA customers only - International sales will open for batch 2 production units, likely to be manufactured sometime around the beginning to middle of May, 2019 (ANN will be posted immediately upon opening International sales).
For crypto payments, please send us a PM with the type of crypto you intend to use, & we will provide you with an appropriate payment address.
- GekkoScience R606 Pod Miner Spooling-up on CGminer -  
   
GekkoScience NewPac USB Bitcoin Miner
GekkoScience has introduced their latest product utilizing the BM1387 ASIC - The "NewPac". Its predecessor, the infamous 2PAC stick/USB miner deployed two of the 28nm (nanometer) BM1384 ASIC chips, but these BRAND NEW miners use TWO (2) of a much more powerful, efficient, & smaller 16nm (nanometer) ASIC from the Antminer S9.
The official NewPac Announcement Thread can be found here: https://bitcointalk.org/index.php?topic=5053711
The official NewPac Support Thread can be found here: https://bitcointalk.org/index.php?topic=5053833.0
The [semi] official NewPac USB Hub Thread can be found here: https://bitcointalk.org/index.php?topic=1779423.0
How to Purchase: https://goo.gl/gmbhwF
cgminer running x5 sticks at over 100Gh/s each - click to enlarge -
Power consumption and expected performance chart:
|
|
|
|
|
|
|
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
rockmoney (OP)
|
 |
November 18, 2018, 05:28:52 PM
Last edit: December 06, 2018, 10:23:13 PM by rockmoney |
|
Here are the latest test results running x4 NewPac sticks at 500Mhz with a Plugable USB3.0 7-Port 60 Watt USB Hub. Average hashrate is 448Gh/s or 0.45Th/s. Each stick is yielding OVER 100Gh/s!
 - click on image to enlarge -
|
|
|
|
jimjam123
Member
 Offline
Activity: 444
Merit: 15
|
|
November 18, 2018, 06:05:58 PM |
|
I will take three.
Paypal sent, lmk.
Thanks,
|
|
|
|
|
jqprez
Member
Offline
Activity: 813
Merit: 65
|
|
November 18, 2018, 06:28:25 PM |
|
i will pay. sent me
|
|
|
|
|
|
rockmoney (OP)
|
|
November 18, 2018, 07:02:51 PM |
|
I will take three.
Paypal sent, lmk.
Thanks,
Payment received for x3 NewPac sticks. Only four (4) more free shipping offers remaining. Thank you! i will pay. sent me
Please post or send me a message with the quantity you wish to purchase, and send payment to: newpacs@yahoo.comOnly three (3) more free shipping offers remaining. Thank you! |
|
|
|
jqprez
Member
Offline
Activity: 813
Merit: 65
|
|
November 18, 2018, 07:14:52 PM |
|
i take two pcs. i sent you a private message
|
|
|
|
|
|
rockmoney (OP)
|
|
November 18, 2018, 08:20:48 PM
Last edit: November 18, 2018, 11:43:37 PM by rockmoney |
|
i take two pcs. i sent you a private message
Personal message sent with shipping quote to your location (Italy). Total cost for two (2) units including shipping to your location is $115.00 USD
Only three (3) free shipping offers remaining. Please remember, the free shipping offer is for USA shipping only. Thanks! |
|
|
|
|
rockmoney (OP)
|
|
November 20, 2018, 07:15:16 PM |
|
Here is a screenshot of the latest GekkoScience/vh cgminer build running one (1) NewPac stick and two (2) 2PAC sticks  |
|
|
|
balarinio
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 21, 2018, 01:29:12 PM |
|
########################################
# GekkoScience NewPac BM1387 Stickminer SALES Thread #
########################################
- Available For Shipment On November 21, 2018 -
GekkoScience has introduced their latest product utilizing the BM1387 ASIC - The "NewPac". Its predecessor, the infamous 2PAC stick/USB miner deployed two of the 28nm (nanometer) BM1384 ASIC chips, but these BRAND NEW miners use TWO (2) of a much more powerful, efficient, & smaller 16nm (nanometer) ASIC from the Antminer S9.
The official NewPac Announcement Thread can be found here: https://bitcointalk.org/index.php?topic=5053711
The official NewPac Support Thread can be found here: https://bitcointalk.org/index.php?topic=5053833.0
The [semi] official NewPac USB Hub Thread can be found here: https://bitcointalk.org/index.php?topic=1779423.0
This thread will be utilized for NewPac sales, which are NOT available to purchase direct from the manufacturer. I will initially be receiving a limited quantity, and will accept reservations from serious buyers via this thread. To reserve yours, please reply with the quantity you intend to purchase. The sale price is $50 each, plus a flat rate shipping and handling charge of $2.50 for USA shipping. Payments will be accepted via PayPal or just about any major crypto.
The first FIVE (5) who post a reply to this thread can reserve a NewPac stick and will receive FREE SHIPPING on their order.
I will also be offering the NewPac sticks for sale on eBay, and will post a link to the listing when it's available. By purchasing direct through the forum, I will be passing the savings onto the customer by charging less (as I will not incur any eBay fees). I will ship Internationally, using a calculated shipping cost to your location (please PM me for a shipping quote if you are located outside of the USA).If paying via PayPal: Send $50 per stick, plus add $2.50 for s&h to: newpacs@yahoo.com (for example, if you are purchasing x3 units, the total cost would be $152.50)
Do i belong in the first 5 then? :-) |
|
|
|
|
morktadela
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 21, 2018, 05:46:06 PM |
|
Hi, I want too!
|
|
|
|
|
|
rockmoney (OP)
|
|
November 21, 2018, 08:50:14 PM |
|
Hi, I want too!
I have received my first shipment of brand new stock, and sticks are being shipped out on a first come, first serve basis. To purchase, please make payment via PayPal to: newpacs@yahoo.com, and send me your shipping address along with the PayPal transaction info. To pay using most major crypto, please send me a message and I will provide you with the corresponding address for payment. If you are located outside of the USA, please send me your address and I will provide you with a shipping quote. Thanks for your interest! |
|
|
|
|
|
|
rockmoney (OP)
|
|
November 24, 2018, 08:52:23 PM
Last edit: November 25, 2018, 04:33:24 PM by rockmoney |
|
☆ Black Friday / Cyber Monday SALE ☆Until end of day Monday November 26, the NewPac USB Stick Miners will be on sale for $45.00 each. PayPal or any major crypto will be accepted for payment. I will ship internationally for the exact cost of shipping to your specific location. Feel free to message me for a shipping quote. To pay via PayPal, please send payments to: newpacs@yahoo.com, then message me with the transaction details and your shipping info. |
|
|
|
|
rockmoney (OP)
|
|
November 26, 2018, 08:31:57 PM |
|
|
|
|
|
jimjam123
Member
Offline
Activity: 444
Merit: 15
|
|
November 27, 2018, 12:32:08 AM |
|
Three of the NEWPACs received and ready to go.
Thanks,
|
|
|
|
|
|
rockmoney (OP)
|
|
November 27, 2018, 10:27:45 PM |
|
Three of the NEWPACs received and ready to go.
Thanks,
Thanks for your reply regarding the x3 units you purchased during the pre-sale. I take great pride in being a beneficial, trustworthy addition to the community, and am glad to see a happy customer! If you need anything else, please let me know!  |
|
|
|
|
rockmoney (OP)
|
|
November 27, 2018, 10:35:07 PM |
|
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
|
|
|
|
digitalcitizen
Copper Member
Jr. Member
Offline
Activity: 115
Merit: 4
|
|
November 29, 2018, 01:25:47 PM |
|
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
Do you have any more left? Do they really do 100Gh/s in ordinary, stable condition? Is there a discount for bulk orders? Do I need a good USB board to plug in several of these that can deliver the necessary power for them, and room enough so they aren't close together? I've always wanted at least 5 of these! Preferably, 10, but you know...  |
|
|
|
|
|
rockmoney (OP)
|
|
November 29, 2018, 08:04:03 PM |
|
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
Do you have any more left? Do they really do 100Gh/s in ordinary, stable condition? Is there a discount for bulk orders? Do I need a good USB board to plug in several of these that can deliver the necessary power for them, and room enough so they aren't close together? I've always wanted at least 5 of these! Preferably, 10, but you know... Yes, there are plenty in stock and available for immediate sale. Theoretically, they can do over 100 Gh/s, but you would need a high end USB hub able to supply at least 2A to each stick simultaneously. I currently have x4 NewPac sticks running at 300Mhz, and yielding 265Gh/s..  |
|
|
|
|
rockmoney (OP)
|
|
December 01, 2018, 09:51:57 PM |
|
★☆ NewPac USB Stick Miner Holiday SALE ☆★
Until DECEMBER 31st, 2018 (or while supplies last), the NewPac USB Stick Miners will be on sale for $45.00 each. - PayPal or any major crypto will be accepted for payment.
- FREE SHIPPING on all USA orders
- International shipping is a flat rate charge of $18.00 USD per order to anywhere in the world!
To pay via PayPal, please send payments to: newpacs@yahoo.com, then message me with the transaction details and your shipping info (all orders are processed and shipped the same or next business day). To pay via crypto, please send me a message with type of crypto intended on using along with the exact amount you intend to pay, and I will promptly reply with a payment address.
|
|
|
|
|
rockmoney (OP)
|
|
December 05, 2018, 05:44:24 PM |
|
The SECOND BATCH of GekkoScience NewPac sticks have arrived and are ready for immediate sale and shipment! Reserve yours now..
|
|
|
|
|
rockmoney (OP)
|
|
December 07, 2018, 10:56:04 PM |
|
Here are the latest test results running x4 NewPac sticks at 500Mhz with a Plugable USB3.0 7-Port 60 Watt USB Hub. Average hashrate is 448Gh/s or 0.45Th/s. Each stick is yielding OVER 100Gh/s!
 - click on image to enlarge -
|
|
|
|
|
rockmoney (OP)
|
|
December 08, 2018, 06:51:15 PM |
|
|
|
|
|
|
rockmoney (OP)
|
|
December 13, 2018, 08:10:55 PM |
|
|
|
|
|
|
rockmoney (OP)
|
|
December 14, 2018, 09:22:43 PM |
|
|
|
|
|
|
rockmoney (OP)
|
|
December 15, 2018, 08:09:15 PM |
|
|
|
|
|
|
rockmoney (OP)
|
|
December 16, 2018, 09:24:46 PM |
|
Some users have been struggling to get there NewPac sticks running at speeds over 100Gh/s. Therefore, I made this diagram to help any users, new or old. There is a potentiometer that controls the voltage, looks like a screw head, and is located on the PCB board of all NewPac USB sticks. If you pay close attention, you will notice a flat section along the outer perimeter of the screw head. Use that flat part for reference as you increase and/or decrease the voltage to meet your needs. Please note, even the slightest movement of the pot will affect the voltage, so only turn the screw head in very small increments.  - click to enlarge -
|
|
|
|
|
rockmoney (OP)
|
|
December 23, 2018, 08:57:19 PM
Last edit: December 24, 2018, 07:27:39 PM by rockmoney |
|
So, I am now mining at over 1Th/s using only NewPac sticks. I have been asked by a few different people to share my setup, so here goes.. I am using an MSI GE72MVR 7RG Apache Pro Laptop running Windows 10.1 latest edition. I am using 2 of the 4 USB ports to connect the new GekkoScience USB hubs available here: 419mining.comTo prevent as much resistance as possible, I am using short (1.5'), gold plated Monoprice USB cables as can be seen on Amazon here: http://a.co/d/34dBcqoI have x5 NewPac sticks in each USB hub, being cooled by placing high velocity 90mm PC fans directly on top of the heatsinks. This blows cool air down each stick and any excess heat along with it. Measuring temps with my infrared thermometer (heat gun) shows temps at 104°F. The 90mm fans fit perfectly when placed directly atop of the USB hub with x5 NewPac stick in, and can be found here: http://a.co/d/dnVhvcNFor power, I am using a HP 1200 Watt Platinum Server PSU with breakout board, and connecting via the 6-pin PCI-e terminal. The 1200 Watt PSU is definitely overkill, but I generally only run my power supplies at 40% of their maximum rated capacity. Virtually the same PSU setup can be found here: 419mining.comTo control the speed of my fans, I am using a 12V DC fan speed controller I had laying around (these are very high velocity fans and need power cranked down a bit). The same one is available on Amazon here: http://a.co/d/g1eLxdzFeel free to view pictures of my setup below, or view the entire gallery by clicking here: https://postimg.cc/gallery/3f4g4bkea/       - click on any photo to enlarge - |
|
|
|
|
gt_addict
|
|
December 24, 2018, 04:22:37 PM |
|
Nice lttle setup rockmoney. Im hoping to have the same going thing going on eventually. Just out of curiousity how much power does do the hubs use? Im thinking of getting a little solar array set up to power mine.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|
rockmoney (OP)
|
|
December 24, 2018, 06:31:10 PM |
|
Nice lttle setup rockmoney. Im hoping to have the same going thing going on eventually. Just out of curiousity how much power does do the hubs use? Im thinking of getting a little solar array set up to power mine.
Power consumption per stick is at most 12 Watts. So, estimating on the extreme high end, that's a total of 120 Watts (10 sticks x 12 Watts each). Plus, the fans are using about 6 Watts each, so that's 12 Watts total for cooling. In total, we have 120 Watts (10 NewPac sticks) + 12 Watts (90mm fans) + 6% (for PSU efficiency) = 140 Watts. On the low side, we can say 10 Watts per stick, and 3 Watts per fan. That would be 100 Watts for the sticks, 6 Watts for the fans, and + 6% = 112.4 Watts. To answer your question, total power consumption for my setup is somewhere between 113 Watts - 140 Watts total. I am averaging ~1.1Th/s poolside with AsicBoost enabled. Without AsicBoost, I don't see any of the "missing nonce" errors on cgminer, but it lowers my average poolside hashrate to ~850Gh/s. |
|
|
|
|
gt_addict
|
|
December 24, 2018, 08:20:35 PM |
|
Thats great. Thanks rockmoney. Looks like a little solar setup may well be feasible on those figures.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|
rockmoney (OP)
|
|
December 26, 2018, 01:06:42 AM |
|
Thats great. Thanks rockmoney. Looks like a little solar setup may well be feasible on those figures.
No problem gt_addict! I don't know too much about solar (mainly because they're moving ass backwards here in the good 'ol US of A, due to fossil fuel entrepreneurs having the money and power to move an entire country that direction), but phillipma1957 is a whiz with solar, and a very active user here (although you likely knew that). Doing a small amount of research after reading your post, I decided to check out 300-500 Watt starter solar systems. My local Home Depot can "special order" a very basic looking 400 Watt solar kit for $619.99 USD. Plus, I would need a fair amount of other various parts and pieces in order to use the power it generates. Having done plenty of electrical work in my lifetime, I'm guessing I would need at least $600 USD for wires, receptacles, junction boxes, and other parts/pieces! Unless I'm missing something, solar would [unfortunately] not make the best option for me at this time. Which, really pisses me of BTW! Anyway, I hope things are better on your side of the pond in regards to renewable energy! But ya, very little power consumption for a great return at those rates for sure! |
|
|
|
|
rockmoney (OP)
|
|
December 27, 2018, 12:34:50 AM
Last edit: December 27, 2018, 05:10:05 PM by rockmoney |
|
Want a NewPac stick(s) for only $35 USD?
Looking for someone in the USA to purchase a NewPac stick from my Amazon listing, and leave a good, detailed review.
I will sell up to two (2) NewPac sticks for $35 each with free s&h in exchange for the review. Competent and capable individuals please PM me if you are interested. Serious inquiries only please. Selection process will be at my sole discretion. Thanks! =)
New Amazon listing can be seen here: http://a.co/d/hrOS2Hg
Person for review has been selected and this offer is now over. Thanks to all who offered their help! =)
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
|
December 27, 2018, 12:37:32 AM |
|
Want a NewPac stick(s) for only $35 USD? Looking for someone in the USA to purchase a NewPac stick from my Amazon listing, and leave a good, detailed review. I will sell up to two (2) NewPac sticks for $35 each with free s&h in exchange for the review. Competent and capable individuals please PM me if you are interested. Serious inquiries only please. Selection process will be at my sole discretion. Thanks! =) New Amazon listing can be seen here: http://a.co/d/hrOS2HgPM |
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
|
rockmoney (OP)
|
|
December 27, 2018, 05:10:35 PM |
|
Want a NewPac stick(s) for only $35 USD? Looking for someone in the USA to purchase a NewPac stick from my Amazon listing, and leave a good, detailed review. I will sell up to two (2) NewPac sticks for $35 each with free s&h in exchange for the review. Competent and capable individuals please PM me if you are interested. Serious inquiries only please. Selection process will be at my sole discretion. Thanks! =) New Amazon listing can be seen here: http://a.co/d/hrOS2HgPM Thank you valkir! =) |
|
|
|
|
gt_addict
|
|
December 29, 2018, 10:06:00 PM |
|
Thats great. Thanks rockmoney. Looks like a little solar setup may well be feasible on those figures.
No problem gt_addict! I don't know too much about solar (mainly because they're moving ass backwards here in the good 'ol US of A, due to fossil fuel entrepreneurs having the money and power to move an entire country that direction), but phillipma1957 is a whiz with solar, and a very active user here (although you likely knew that). Doing a small amount of research after reading your post, I decided to check out 300-500 Watt starter solar systems. My local Home Depot can "special order" a very basic looking 400 Watt solar kit for $619.99 USD. Plus, I would need a fair amount of other various parts and pieces in order to use the power it generates. Having done plenty of electrical work in my lifetime, I'm guessing I would need at least $600 USD for wires, receptacles, junction boxes, and other parts/pieces! Unless I'm missing something, solar would [unfortunately] not make the best option for me at this time. Which, really pisses me of BTW! Anyway, I hope things are better on your side of the pond in regards to renewable energy! But ya, very little power consumption for a great return at those rates for sure! After a bit of research here in the UK I think I’m in agreement with you lol. Its a bit expensive just for the panels, controller and associated ancilleries. Factor in a couple of deep cycle batteries and the fact its inevitably overcast here it just doesnt make sense. Oh well, the hope of a mini “gekko green” rig will have to wait. |
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
digitalcitizen
Copper Member
Jr. Member
Offline
Activity: 115
Merit: 4
|
|
January 04, 2019, 06:21:55 AM |
|
Does anyone have one in Australia they will accept BTC payment for, that can be shipped after the weekend? Thanks, I'd love to get my hands on one before I get a few from the US. I'm offering BTC but I can exchange to a different currency if you prefer, or I can cash out and do a bank deposit. Whatever works for you. Cheers |
|
|
|
|
|
gt_addict
|
|
January 07, 2019, 04:41:20 PM |
|
Anyone heard from rockmoney? Messaged a few days ago about some gear and havent heard anything.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
vm1990
Legendary
Offline
Activity: 1540
Merit: 1002
|
|
January 17, 2019, 01:23:33 PM |
|
Thats great. Thanks rockmoney. Looks like a little solar setup may well be feasible on those figures.
No problem gt_addict! I don't know too much about solar (mainly because they're moving ass backwards here in the good 'ol US of A, due to fossil fuel entrepreneurs having the money and power to move an entire country that direction), but phillipma1957 is a whiz with solar, and a very active user here (although you likely knew that). Doing a small amount of research after reading your post, I decided to check out 300-500 Watt starter solar systems. My local Home Depot can "special order" a very basic looking 400 Watt solar kit for $619.99 USD. Plus, I would need a fair amount of other various parts and pieces in order to use the power it generates. Having done plenty of electrical work in my lifetime, I'm guessing I would need at least $600 USD for wires, receptacles, junction boxes, and other parts/pieces! Unless I'm missing something, solar would [unfortunately] not make the best option for me at this time. Which, really pisses me of BTW! Anyway, I hope things are better on your side of the pond in regards to renewable energy! But ya, very little power consumption for a great return at those rates for sure! After a bit of research here in the UK I think I’m in agreement with you lol. Its a bit expensive just for the panels, controller and associated ancilleries. Factor in a couple of deep cycle batteries and the fact its inevitably overcast here it just doesnt make sense. Oh well, the hope of a mini “gekko green” rig will have to wait. Buy broken panels get them super cheap and most put out decent voltage and around half current got 3 panels a while ago cost £30 for 500watts cheap change controller £5-10 and a few dieing battery's £15 each step down from 24v to 5v £10 for 20amp less than £100 not to bad in the end |
|
|
|
cekolaw
Newbie
Offline
Activity: 19
Merit: 13
|
|
January 18, 2019, 01:04:26 AM |
|
Some users have been struggling to get there NewPac sticks running at speeds over 100Gh/s. Therefore, I made this diagram to help any users, new or old. There is a potentiometer that controls the voltage, looks like a screw head, and is located on the PCB board of all NewPac USB sticks. If you pay close attention, you will notice a flat section along the outer perimeter of the screw head. Use that flat part for reference as you increase and/or decrease the voltage to meet your needs. Please note, even the slightest movement of the pot will affect the voltage, so only turn the screw head in very small increments. https://i.postimg.cc/wyzB2mmk/Voltage-Adjustment-1c.jpg- click to enlarge -
Dear Rockmoney, May I know where are the probe points to measure the voltage across the actual Vcc across the ASICs BM1387 with a multimeter? Thank you. |
|
|
|
|
|
rockmoney (OP)
|
|
March 31, 2019, 07:47:55 AM |
|
Some users have been struggling to get there NewPac sticks running at speeds over 100Gh/s. Therefore, I made this diagram to help any users, new or old. There is a potentiometer that controls the voltage, looks like a screw head, and is located on the PCB board of all NewPac USB sticks. If you pay close attention, you will notice a flat section along the outer perimeter of the screw head. Use that flat part for reference as you increase and/or decrease the voltage to meet your needs. Please note, even the slightest movement of the pot will affect the voltage, so only turn the screw head in very small increments. - click to enlarge -
Dear Rockmoney, May I know where are the probe points to measure the voltage across the actual Vcc across the ASICs BM1387 with a multimeter? Thank you. A multimeter is highly suggested for this, and one can be purchased for under ~$10 USD on Amazon. The probe points should be located in the same spot as the 2PAC, and there are instructions with pictures in the 1st post of the old 2PAC support thread. |
|
|
|
|
rockmoney (OP)
|
|
March 31, 2019, 07:52:43 AM
Last edit: April 03, 2019, 09:04:54 PM by rockmoney |
|
NewPac sticks and the new version 8-port metal hubs are now available for purchase via Amazon Prime, with fulfillment by Amazon!
Feel free to check them out here: [https://www.amazon.com/s?me=A1M85UO7XGTF0E&marketplaceID=ATVPDKIKX0DER]https://goo.gl/gmbhwF[/url]
|
|
|
|
|
Valnurat
|
|
April 03, 2019, 08:34:10 PM |
|
NewPac sticks and the new version 8-port metal hubs are now available for purchase via Amazon Prime, with fulfillment by Amazon!
Feel free to check them out here: https://goo.gl/gmbhwF
I can't get the link to work. |
|
|
|
|
|
|
|
Valnurat
|
|
April 04, 2019, 09:17:15 AM |
|
You are welcome. I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s? And where is the 8 port HUB. I don't see it on the link.  |
|
|
|
|
cjsummers82
Newbie
Offline
Activity: 22
Merit: 30
|
|
April 12, 2019, 02:09:10 PM |
|
You are welcome. I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s? And where is the 8 port HUB. I don't see it on the link. If you overclock them, they can reach up to 130 GH/s. This will require significant active cooling, as well as a high quality powered hub -- here is the link for the GekkoScience one I am using: https://www.amazon.com/dp/B07PP9SJ1R/ref=cm_sw_em_r_mt_dp_U_.TjSCb6VCT63R |
|
|
|
|
|
rockmoney (OP)
|
|
April 14, 2019, 07:52:50 PM |
|
You are welcome. I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s? And where is the 8 port HUB. I don't see it on the link. You are welcome. I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s? And where is the 8 port HUB. I don't see it on the link. If you overclock them, they can reach up to 130 GH/s. This will require significant active cooling, as well as a high quality powered hub -- here is the link for the GekkoScience one I am using: https://www.amazon.com/dp/B07PP9SJ1R/ref=cm_sw_em_r_mt_dp_U_.TjSCb6VCT63R
I have personally checked all of the links to the MinersSupply Amazon store, and all are working fine for me. I also had a couple of friends check the links, and they all worked for them as well. If you are still unable to view our GekkoScience USB hub on Amazon.com, you should be able to find it by searching for "GekkoScience USB hub" directly on Amazon.com Additionally, we highly recommend using a server power supply and breakout board to power the USB hub (as opposed to a "power brick"). In addition to being much more energy efficient, a server PSU of the appropriate wattage will also provide much better power to your NewPac sticks. Lastly, the theoretical hashrate for the NewPac stick miners are UP TO 135Gh/s (this does NOT mean they are GUARANTEED to produce 135Gh/s, but under ideal conditions, I have personally had single NewPac sticks hashing at close to 150Gh/s). There are also many different variables that will effect the NewPac hashrate, including available power, temperature, and voltage.
For the first batch of R606 pod miners, sales will ONLY be accepted direct through the forum. Beginning with batch #2 units, we plan on making them available via Amazon Prime, currently anticipate that being sometime in the middle of May, 2019.
|
|
|
|
|
rockmoney (OP)
|
|
May 13, 2019, 02:14:05 AM |
|
I do love little USB miners, is ck still doing their little fun run pool? Might be worth it just for tinkering.
Not sure what ck is up to, but kano is fairly active in the NewPac/R606 thread, and we even did some testing together on the new GekkoScience R606 Terminus Pod Miner, capable of up to 1Th/s+ in a closed-box design, and powered via USB through an external controller! Our Amazon listings for the R606 stand alone miner, and with 94% Platinum HP 1200W and 750W power supply unit kit are now live (although hard to keep in stock). MinersSupply Amazon Prime Storefront, Featuring Official GekkoScience Productsor https://www.amazon.com/shops/MinersSupply |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7853
'The right to privacy matters'
|
|
May 13, 2019, 02:38:25 AM |
|
|
|
|
|
ultimate64
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 10, 2019, 04:46:21 PM |
|
hello everybody ... do you know where to buy a GekkoScience R606 Terminus in Europe?? thank you all and good weekend
|
|
|
|
|
|
|
|
