★ [NEW] 1Th/s+ GekkoScience R606 Pod Miner & Product Sales Thread ★

[rockmoney]

Some users have been struggling to get there NewPac sticks running at speeds over 100Gh/s. Therefore, I made this diagram to help any users, new or old. There is a potentiometer that controls the voltage, looks like a screw head, and is located on the PCB board of all NewPac USB sticks. If you pay close attention, you will notice a flat section along the outer perimeter of the screw head. Use that flat part for reference as you increase and/or decrease the voltage to meet your needs. Please note, even the slightest movement of the pot will affect the voltage, so only turn the screw head in very small increments.


- click to enlarge -

Dear Rockmoney,

May I know where are the probe points to measure the voltage across the actual Vcc across the ASICs BM1387 with a multimeter?

Thank you. 

A multimeter is highly suggested for this, and one can be purchased for under ~$10 USD on Amazon. The probe points should be located in the same spot as the 2PAC, and there are instructions with pictures in the 1st post of the old 2PAC support thread.

[rockmoney]

NewPac sticks and the new version 8-port metal hubs are now available for purchase via Amazon Prime, with fulfillment by Amazon!

Feel free to check them out here: [https://www.amazon.com/s?me=A1M85UO7XGTF0E&marketplaceID=ATVPDKIKX0DER]https://goo.gl/gmbhwF[/url]

[Valnurat]

NewPac sticks and the new version 8-port metal hubs are now available for purchase via Amazon Prime, with fulfillment by Amazon!

Feel free to check them out here: https://goo.gl/gmbhwF

I can't get the link to work.

[rockmoney]

NewPac sticks and the new version 8-port metal hubs are now available for purchase via Amazon Prime, with fulfillment by Amazon!

Feel free to check them out here: https://goo.gl/gmbhwF

I can't get the link to work.

It works for me, but might be a problem with the URL shortener I used.

Here is the standard URL: https://www.amazon.com/s?me=A1M85UO7XGTF0E&marketplaceID=ATVPDKIKX0DER

Sorry for any inconvenience! Thanks for the heads up!!

[Valnurat]

You are welcome.

I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s?

And where is the 8 port HUB. I don't see it on the link.

 

[cjsummers82]

You are welcome.

I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s?

And where is the 8 port HUB. I don't see it on the link.

 

If you overclock them, they can reach up to 130 GH/s.  This will require significant active cooling, as well as a high quality powered hub -- here is the link for the GekkoScience one I am using: https://www.amazon.com/dp/B07PP9SJ1R/ref=cm_sw_em_r_mt_dp_U_.TjSCb6VCT63R

[rockmoney]

You are welcome.

I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s?

And where is the 8 port HUB. I don't see it on the link.

 

You are welcome.

I'm little confused. This thread title says 100GH/s but the link point to 130 GH/s. So is it the same? How can you push them to 130 GH/s?

And where is the 8 port HUB. I don't see it on the link.

 

If you overclock them, they can reach up to 130 GH/s.  This will require significant active cooling, as well as a high quality powered hub -- here is the link for the GekkoScience one I am using: https://www.amazon.com/dp/B07PP9SJ1R/ref=cm_sw_em_r_mt_dp_U_.TjSCb6VCT63R

I have personally checked all of the links to the MinersSupply Amazon store, and all are working fine for me. I also had a couple of friends check the links, and they all worked for them as well. If you are still unable to view our GekkoScience USB hub on Amazon.com, you should be able to find it by searching for "GekkoScience USB hub" directly on Amazon.com

Additionally, we highly recommend using a server power supply and breakout board to power the USB hub (as opposed to a "power brick"). In addition to being much more energy efficient, a server PSU of the appropriate wattage will also provide much better power to your NewPac sticks.

Lastly, the theoretical hashrate for the NewPac stick miners are UP TO 135Gh/s (this does NOT mean they are GUARANTEED to produce 135Gh/s, but under ideal conditions, I have personally had single NewPac sticks hashing at close to 150Gh/s). There are also many different variables that will effect the NewPac hashrate, including available power, temperature, and voltage.


For the first batch of R606 pod miners, sales will ONLY be accepted direct through the forum. Beginning with batch #2 units, we plan on making them available via Amazon Prime, currently anticipate that being sometime in the middle of May, 2019.

[rockmoney]

I do love little USB miners, is ck still doing their little fun run pool? Might be worth it just for tinkering.

Not sure what ck is up to, but kano is fairly active in the NewPac/R606 thread, and we even did some testing together on the new GekkoScience R606 Terminus Pod Miner, capable of up to 1Th/s+ in a closed-box design, and powered via USB through an external controller!  

Our Amazon listings for the R606 stand alone miner, and with 94% Platinum HP 1200W and 750W power supply unit kit are now live (although hard to keep in stock).

MinersSupply Amazon Prime Storefront, Featuring Official GekkoScience Products

or

https://www.amazon.com/shops/MinersSupply

[philipma1957]

I have one of the r606 and 3 of the new pac sticks I mine here


http://solo.ckpool.org/users/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

[ultimate64]

hello everybody ... do you know where to buy a GekkoScience R606 Terminus in Europe?? thank you all and good weekend

[klintay]

hello everybody ... do you know where to buy a GekkoScience R606 Terminus in Europe?? thank you all and good weekend

This is the official EU retailer:
https://www.bitshopper.de/

If they are out of stock then you can always try these websites or ebay:

https://www.eyeboot.com/gekkoscience-terminus-r606.html
https://www.419mining.com/shop/miners/gekkoscience-r606-pod-miner/