r00tdude
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 04:19:53 AM |
|
Apollo miner won't power on for me.
I've tried two different power supplies: 1) Corsair 450W and a 2) Powerspec 420W
Any suggestions?
I know this sounds stupid, but did you short the enable pin if you are using an ATX PSU without a PC attached to it? I’ve already had a few emails like this because of that issue ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Need to build a stand alone PSU for this ASAP! This did the trick! Thank you! Oh my.
|
Bitrated user: r00tdude.
|
|
|
wttbs
Legendary
Offline
Activity: 2210
Merit: 1109
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 10:28:44 AM Last edit: December 20, 2018, 12:56:58 PM by wttbs |
|
just fired up my FutureBit Apollo ! and how amazing simple setup is, jobvery well done. Just flash SD, connect cables, turn it on, go to very clear webinterface, setup pool and hash away. Connected my (first) Apollo to a Coolmaster Gold PSU, on ECO mode it draws 126 Watt from the wall. And this miner is silent ! amazing ! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FASlz2xn.jpg&t=665&c=UgEzanRfZfriIA) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FtbYIGeK.png&t=665&c=_QErgAiz27SYSg) But.. check the discarded ... that is a bit high isn't it ? [update] Set it to advanced mode and rebooted, now does 165W from wall ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjUg5RRU.png&t=665&c=d-8TNR_uon1exQ) [update 2] installed second Apollo, after some reboots, both miners on ECO mode ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.gyazo.com%2Fa5fed3b3871f4c678084cde2987d8f17.png&t=665&c=rDoIy-Qi3cGNJw)
|
|
|
|
redzep
Jr. Member
Offline
Activity: 44
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 01:33:53 PM |
|
hi all mine got delivered monday in UK no damage and thought great no import tax, until text from fedex asking for £54.95 ... ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) nice and simple to setup and running like a dream... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
drakedave
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 01:38:15 PM |
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8351
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 02:04:57 PM |
|
hi all mine got delivered monday in UK no damage and thought great no import tax, until text from fedex asking for £54.95 ... ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) nice and simple to setup and running like a dream... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Fedex does that : pays the government up front then bills the customer.
|
|
|
|
crypto_curious
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 02:20:01 PM Last edit: December 20, 2018, 02:41:55 PM by crypto_curious |
|
jstefanop,
What is login and password to ssh? Also, how to "forget" wifi credentials? Disconnect button does nothing.
It’s futurebit/futurebit Disconnect button should clear WiFi connections. Thanks! How to expand filesystem to whole card? I copies Apollo Final image by Etcher.io to my 16GB microSD card. Only 2GB is allocated on the card. Is there similar way to expand filesystem, like on Raspberry Pi? I've been to "parted" and "armbian-config" but I don't want to mess up.
|
|
|
|
dwood443
Jr. Member
Offline
Activity: 95
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 03:42:30 PM |
|
I have two Apollos and both seem to be mining well. I do see one has many more discarded shares than the other. One has about the same acepted as discarded and the other has about 8x as many discarded than accepted. Both are on the same pool and both are set to ECO.
However I realize this is beta and I'm not complaining at all. Just wanted you to know.
|
|
|
|
redzep
Jr. Member
Offline
Activity: 44
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 03:47:51 PM Last edit: December 20, 2018, 04:47:55 PM by redzep |
|
Hi spoke to soon, got an issue with coinpool.nl mining Gulden, seems best i can get is about 47Mhz Tried all the different Port ranges, this is the best hash i can get, any advice litecoinpool i have no issue with at all ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2F3Nmw1d7S%2Fcoinpool-nl.jpg&t=665&c=E-l_XdQQow9CEw) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2Fk5HXdxgY%2FGulden.jpg&t=665&c=cZde2f6s7TnOsw) Thanks
|
|
|
|
crypto_curious
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 03:53:04 PM |
|
Hi spoke to soon, got an issue with coinpool.nl mining Gulden, seems best i can get is about 47Mhz Tried all the different Port ranges, this is the best hash i can get, any advice litecoinpool i have no issue with at all ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fphotos.google.com%2Fphoto%2FAF1QipPOBamhyerR_xrvpR7CP_CTbKzbyU-lUI9PhpD6&t=665&c=eUJ0go14ee7Hmg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fphotos.google.com%2Fsearch%2F_tra_%2Fphoto%2FAF1QipPNPEm7NfVDkbqU7J-kZ1P0NL-7I1yUFrVWpXSl&t=665&c=UCSS6E95u3ClDw) Thanks Error 404 Not Found. Fix your image links.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 04:28:54 PM |
|
jstefanop,
What is login and password to ssh? Also, how to "forget" wifi credentials? Disconnect button does nothing.
It’s futurebit/futurebit Disconnect button should clear WiFi connections. Thanks! How to expand filesystem to whole card? I copies Apollo Final image by Etcher.io to my 16GB microSD card. Only 2GB is allocated on the card. Is there similar way to expand filesystem, like on Raspberry Pi? I've been to "parted" and "armbian-config" but I don't want to mess up. Image will auto expand filesystem on the next update.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 04:30:12 PM |
|
I have two Apollos and both seem to be mining well. I do see one has many more discarded shares than the other. One has about the same acepted as discarded and the other has about 8x as many discarded than accepted. Both are on the same pool and both are set to ECO.
However I realize this is beta and I'm not complaining at all. Just wanted you to know.
Don't worry about discarded shares...this is legacy stuff from bfgminer that end users shouldn't see anyway...will probably remove this on next UI update.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 04:31:32 PM |
|
Hi spoke to soon, got an issue with coinpool.nl mining Gulden, seems best i can get is about 47Mhz Tried all the different Port ranges, this is the best hash i can get, any advice litecoinpool i have no issue with at all ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fphotos.google.com%2Fphoto%2FAF1QipPOBamhyerR_xrvpR7CP_CTbKzbyU-lUI9PhpD6&t=665&c=eUJ0go14ee7Hmg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fphotos.google.com%2Fsearch%2F_tra_%2Fphoto%2FAF1QipPNPEm7NfVDkbqU7J-kZ1P0NL-7I1yUFrVWpXSl&t=665&c=UCSS6E95u3ClDw) Thanks Will check this pool and report back.
|
|
|
|
redzep
Jr. Member
Offline
Activity: 44
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 04:48:35 PM Last edit: December 20, 2018, 06:34:23 PM by redzep |
|
hi sorted images out, how do you get pic's on this site cant remember ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2F3Nmw1d7S%2Fcoinpool-nl.jpg&t=665&c=E-l_XdQQow9CEw) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2Fk5HXdxgY%2FGulden.jpg&t=665&c=cZde2f6s7TnOsw) odd the site is reporting 110.28 MH hash rate, also got 3 x moonlanders pointed there, which is normally about 14MH
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 08:02:36 PM |
|
hi
sorted images out, how do you get pic's on this site cant remember
odd the site is reporting 110.28 MH hash rate, also got 3 x moonlanders pointed there, which is normally about 14MH
Yea tested it out...seems like there is some weird stuff going on pool side. It seems to correct itself after a while, but I need to check out more info on this coin. This port seems to work better port 20006 => 4096 Looks like the pool is not providing work fast enough though causing the miner to run out of work and return all those errors your seeing. I would try another Gulden pool.
|
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6496
Crypto Swap Exchange
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 09:42:18 PM |
|
Ok before you do all that try this.
Go to settings, set to custom miner mode.
Set voltage to 777mv, and keep frequency at 598 (eco).
Because this movie quote just says it all.... https://www.youtube.com/watch?v=hl8e9i6YiA8&feature=youtu.be&t=21New issue, massive discards, 95%+ HW error. Once again, on both secdsm pool and litecoin pool. -Dave Hmmm very weird. Keep these settings, and do a full system shutdown, unplug from power, then start it up again. More or less the same. Different PS & different network location (tech bench) I can take it apart and try a reflow in the morning. -Dave umm definitely don't do that. Shoot me a PM, will most likely need you to send it back. But I like taking things apart and trying to fix them :-) Because it worked for hours before going funky I am thinking either SD card is having issues or something that was not attached to it's solder pads well and it separated. It is a new SD card, but it's a Microcenter one so I'll try that tomorrow. If not I'll get back to you after Christmas about shipping it back. Thanks, Dave It wouldn’t be a solder issue, it would not work at all even if one chip had a problem. You didn’t overvolt or run it in turbo did you because this type of error sounds like heat or voltage damage. Either way would like it back in its current state so we can diagnose it properly. Got in early the AM To test. New SD card fixed the issue for a little while. Figured it was just a bad card, have seen that from time to time. And the pretty GUI keeps you from seeing all the errors stream by. I tested the pulled card and it failed basic CHKDSK on windows so good guess on my part....Or so I thought. Back to the same after about 3 or 4 hours, reboot / crash and 1000s of discards / 1000s HW errors. Pulled card and ran CHKDSK new card failed too. Putting in "name brand" (sandisk) card now. Hoping it's just the Orange PI does not like the microcenter cards. If not I'll swing by Brooklyn after the holidays and you can figure it out :-) -Dave
|
|
|
|
redzep
Jr. Member
Offline
Activity: 44
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 09:52:10 PM |
|
Thanks jstefanop for looking into this, thought it my be pool side related, because with litecoinpool works perfectly regarding Gulden and pools that was only one i could find with decent numbers of workers and that moonlanders would work on, though was a few months back got fed up with getting .0001 of litecone every 2 weeks with moonlanders so changed to Gulden, got coin every day.... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
r00tdude
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 11:20:52 PM |
|
Development suggestions
1 - a way to rotate through miner settings based on time of day...
I'd like to be able to mine Turbo or Custom during the evenings and Eco throughout the day without touching the miners.
Figuring a shell script and a cronjob is all it would take...
2 - Minera has a section of the UI where you could configure it to watch your other rigs. Seems like this was removed (assuming that was to unclutter the UI which is great) - but seeing as many of us will own more than one, it'd be nice to see it added back.
3 - I don't know about anyone else but I'd like to be able to view the raw BFGMiner output and watch the pretty numbers. At least see screen added to the build and have the instance of bfgminer running in a console at boot so we could peek over a terminal session.
Otherwise this is a fine, fine piece of work jstefanop. I'm very impressed with the design and detail work you did on the hardware and the software.
|
Bitrated user: r00tdude.
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 11:53:02 PM |
|
Ok before you do all that try this.
Go to settings, set to custom miner mode.
Set voltage to 777mv, and keep frequency at 598 (eco).
Because this movie quote just says it all.... https://www.youtube.com/watch?v=hl8e9i6YiA8&feature=youtu.be&t=21New issue, massive discards, 95%+ HW error. Once again, on both secdsm pool and litecoin pool. -Dave Hmmm very weird. Keep these settings, and do a full system shutdown, unplug from power, then start it up again. More or less the same. Different PS & different network location (tech bench) I can take it apart and try a reflow in the morning. -Dave umm definitely don't do that. Shoot me a PM, will most likely need you to send it back. But I like taking things apart and trying to fix them :-) Because it worked for hours before going funky I am thinking either SD card is having issues or something that was not attached to it's solder pads well and it separated. It is a new SD card, but it's a Microcenter one so I'll try that tomorrow. If not I'll get back to you after Christmas about shipping it back. Thanks, Dave It wouldn’t be a solder issue, it would not work at all even if one chip had a problem. You didn’t overvolt or run it in turbo did you because this type of error sounds like heat or voltage damage. Either way would like it back in its current state so we can diagnose it properly. Got in early the AM To test. New SD card fixed the issue for a little while. Figured it was just a bad card, have seen that from time to time. And the pretty GUI keeps you from seeing all the errors stream by. I tested the pulled card and it failed basic CHKDSK on windows so good guess on my part....Or so I thought. Back to the same after about 3 or 4 hours, reboot / crash and 1000s of discards / 1000s HW errors. Pulled card and ran CHKDSK new card failed too. Putting in "name brand" (sandisk) card now. Hoping it's just the Orange PI does not like the microcenter cards. If not I'll swing by Brooklyn after the holidays and you can figure it out :-) -Dave Ive been using the Microcenter cards for a few weeks now so don't think its that. Could be a bad controller then. Just let me know when you can send it over and ill figure out what it is.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 20, 2018, 11:54:38 PM |
|
Development suggestions
1 - a way to rotate through miner settings based on time of day...
I'd like to be able to mine Turbo or Custom during the evenings and Eco throughout the day without touching the miners.
Figuring a shell script and a cronjob is all it would take...
2 - Minera has a section of the UI where you could configure it to watch your other rigs. Seems like this was removed (assuming that was to unclutter the UI which is great) - but seeing as many of us will own more than one, it'd be nice to see it added back.
3 - I don't know about anyone else but I'd like to be able to view the raw BFGMiner output and watch the pretty numbers. At least see screen added to the build and have the instance of bfgminer running in a console at boot so we could peek over a terminal session.
Otherwise this is a fine, fine piece of work jstefanop. I'm very impressed with the design and detail work you did on the hardware and the software.
Like the ideas...keep them coming in...have a list going and will add lots over time.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8351
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 21, 2018, 12:51:46 AM |
|
hi sorted images out, how do you get pic's on this site cant remember ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2F3Nmw1d7S%2Fcoinpool-nl.jpg&t=665&c=E-l_XdQQow9CEw) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2Fk5HXdxgY%2FGulden.jpg&t=665&c=cZde2f6s7TnOsw) odd the site is reporting 110.28 MH hash rate, also got 3 x moonlanders pointed there, which is normally about 14MH Did this work?
|
|
|
|
|