MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each

[VictorBC]

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with  SD Rabian.


I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

[azadbitcoin]

Hi;

Why has not the product you ordered???
Not that I'm throwing mail very indifferent answer.,


Gridseed G-Blade Scrypt Miner (80 chip) Summer promotion × 1
Order no : 2169

[emdje]

Want to over-clock the device: https://bitcointalk.org/index.php?topic=669390

someone any ideas on how to do that?

[JoostB]

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with  SD Rabian.


I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

You can write the image to SD card under Windows with a program called 'Win32DiskImager'.

http://sourceforge.net/projects/win32diskimager/

[JoostB]

Want to over-clock the device: https://bitcointalk.org/index.php?topic=669390

someone any ideas on how to do that?

When this is possible it won't be easy, you have to modify cgminer for it.
Maybe you can get some idea from the A2 programming guide.

http://www.usbminers.nl/Innosilicon_A2_PG_v120140424.pdf

[VictorBC]

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with  SD Rabian.


I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

You can write the image to SD card under Windows with a program called 'Win32DiskImager'.

http://sourceforge.net/projects/win32diskimager/

I already do. After recording the image on the SD, as I install the "zeuscontroller web" in the Pi?

Thanks.

[JoostB]

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with  SD Rabian.


I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

You can write the image to SD card under Windows with a program called 'Win32DiskImager'.

http://sourceforge.net/projects/win32diskimager/

I already do. After recording the image on the SD, as I install the "zeuscontroller web" in the Pi?

Thanks.

Yes, because it uses a static IP-address, the address will very likely be different as with the other image, that could be your problem.
Maybe you can look in the ARP table of your router to find it.

Edit:
I'm not sure about the IP-address, maybe the Zeus image is using DHCP. I,m mixing things up with the A2 image.
I don't have a Zeus miner running at the moment, so I can't check it.

[minereu.com]

I have already received my "Zeus ThunderX3 " and "HuracaneX3" at first seems to be all right. It has arrived well packaged and clean.

I have a problem is that the "ThunderX3" only goes 14Mhs. I connected all the blades. All seem to work, but the "script" of MinerEU just gives me 14MHs

I want to install the script of Zeus. "Zeus Controller". but I copy the image to the SD, but not to do. How to install the image on the "RaspberryPI"?. The Scrip MinerEU I installed with  SD Rabian.


I have two "ThunderX3" and the two 14Mhs. Something I'm doing wrong

Any idea?

Images:

http://i62.tinypic.com/nxrodw.jpg
http://i59.tinypic.com/2z50g7b.jpg
http://i61.tinypic.com/2yu0itf.jpg

Forgive my ignorance. THANKS,

You can write the image to SD card under Windows with a program called 'Win32DiskImager'.

http://sourceforge.net/projects/win32diskimager/

I already do. After recording the image on the SD, as I install the "zeuscontroller web" in the Pi?

Thanks.

did you change chip count in the miner tab ? if it is thunderX3, you are recommended to change chip count to 2*actual chips

[VictorBC]

Already solved, so Zeus Script. I needed to share him to take IP network.

Now, the miner does nothing. He says this:

"[29.06.2014 17:43:56] Started cgminer 3.1.1
[06/29/2014 17:43:56] Loaded configuration file conf/cgminer_ttyUSB0.conf
[06/29/2014 17:43:56] Error in configuration file, partially loaded.
[06/29/2014 17:44:00] Probing for an alive pool
[06/29/2014 17:44:00] Failed to resolve eu.wafflepool.com (wrong URL?): 3333
[06/29/2014 17:45:00] No servers were found that Could be used to get work from.
[06/29/2014 17:45:00] Please check the details from the list below of the worlds You have input
[06/29/2014 17:45:00] Most likely You have input the wrong URL, forgotten to add a port, or Have Not set-up workers
[06/29/2014 17:45:00] Pool: 0 URL: stratum + tcp :/ / eu.wafflepool.com: 3333-u 1Noj7qZRigqvpj1P5qSxHhXXXXXXXWh-pd = 1024 - scrypt User: Password haipo.2: x
[06/29/2014 17:45:00] No servers Could be used! Exiting. "

I have that wrong?

Thanks.

[JoostB]

This is wrong.

You should only put the URL in the Pool Address.
The wallet address in the Worker Name.
And d=1024 in the Password.

Don't use --scrypt because this will be added automatically.
Don't use -u and -p this will be added automatically as well.

When done press Save and Restart.

[emdje]

Want to over-clock the device: https://bitcointalk.org/index.php?topic=669390

someone any ideas on how to do that?

When this is possible it won't be easy, you have to modify cgminer for it.
Maybe you can get some idea from the A2 programming guide.

http://www.usbminers.nl/Innosilicon_A2_PG_v120140424.pdf

Thnx!

Seems that I will need to change the payload data fed to the chips and change the binary data of the 'io_pll_fbdiv[8:0]'  .
Should be possible, the firmware I have (Innosilicon A2 Terminator version) contains a dropdown menu with various option, maybe I can create a new entry.
Somebody any ideas?

[VictorBC]

This is wrong.

You should only put the URL in the Pool Address.
The wallet address in the Worker Name.
And d=1024 in the Password.

Don't use --scrypt because this will be added automatically.
Don't use -u and -p this will be added automatically as well.

When done press Save and Restart.

Perfect!! Very THanks. 

[ShopemNL]

When will the 1TH miner be shipped? Orderded 19 jun

[emdje]

Want to over-clock the device: https://bitcointalk.org/index.php?topic=669390

someone any ideas on how to do that?

When this is possible it won't be easy, you have to modify cgminer for it.
Maybe you can get some idea from the A2 programming guide.

http://www.usbminers.nl/Innosilicon_A2_PG_v120140424.pdf

Thnx!

Seems that I will need to change the payload data fed to the chips and change the binary data of the 'io_pll_fbdiv[8:0]'  .
Should be possible, the firmware I have (Innosilicon A2 Terminator version) contains a dropdown menu with various option, maybe I can create a new entry.
Somebody any ideas?

I can program to tweak the Clock frequency with any increment I like now  
Currently I programmed the options 1280 to 1330 with increments of 10MHz.
Now running at 1300MHz at a stable HW error rate of 3.7%

I have increased the difficulty you can set to 2048 as well.

If anybody is interested I can look into how to provide it to you guys.

[JoostB]

Want to over-clock the device: https://bitcointalk.org/index.php?topic=669390

someone any ideas on how to do that?

When this is possible it won't be easy, you have to modify cgminer for it.
Maybe you can get some idea from the A2 programming guide.

http://www.usbminers.nl/Innosilicon_A2_PG_v120140424.pdf

Thnx!

Seems that I will need to change the payload data fed to the chips and change the binary data of the 'io_pll_fbdiv[8:0]'  .
Should be possible, the firmware I have (Innosilicon A2 Terminator version) contains a dropdown menu with various option, maybe I can create a new entry.
Somebody any ideas?

I can program to tweak the Clock frequency with any increment I like now 
Currently I programmed the options 1280 to 1330 with increments of 10MHz.
Now running at 1300MHz at a stable HW error rate of 3.7%

That is very nice, my A2Mini won't do that.
Maybe I could try it on one of the blades, the other one is not good enough for it.

I still have to replace the PSU, it was in stock they said, but that was a lie.
By the end of the week when I have the new PSU, I will try to improve upon the cooling as well.
My hope is, that with better cooling I can clock it a little bit higher.

[JoostB]

Did you modify cgminer and recompiled it for the Raspberry Pi?
Or could you do this with some changes in a configuration file?

[emdje]

Did you modify cgminer and recompiled it for the Raspberry Pi?
Or could you do this with some changes in a configuration file?

Mind that you need the A2 Innosilicon image for this!! Not the one from MinerEU

If you SSH into the pi using Xming and Putty you can navigate to /var/www, open 'leaflet' or any other 'notepad' kind of software and paste the following code:

Code:

<?php
function cg_status() {	
	system("sudo ps -U root | grep -c cgminer > php.log",$ret_val);
	$file = fopen("./php.log","r");
	$read = fgets($file);
	if($read != 0)
		$cg_status = "run";
	else
		$cg_status = "stop";
	return $cg_status;
}

function cg_stop() {	
	system("sudo pkill cgminer > php.log",$ret_val);
}

function cg_start($pool1, $id1, $pwd1, $pool2, $id2, $pwd2, $pool3, $id3, $pwd3, $speed1, $speed2, $speed3, $speed4, $speed5, $speed6, $diff) {
	cg_stop();
	sleep(1);
	$cmd = "sudo ./cgminer -o ".$pool1." -u ".$id1." -p ".$pwd1." -o ".$pool2." -u ".$id2." -p ".$pwd2." -o ".$pool3." -u ".$id3." -p ".$pwd3." --A1Pll1 ".$speed1." --A1Pll2 ".$speed2." --A1Pll3 ".$speed3." --A1Pll4 ".$speed4." --A1Pll5 ".$speed5." --A1Pll6 ".$speed6." --diff ".$diff." --api-listen --api-network --cs 8 --stmcu 0 --hwreset --no-submit-stale --lowmem > cgminer.log &";

	$file = fopen("./run.sh","w");
	fputs($file, "#!/bin/bash\n");
        fputs($file, $cmd."\n");
        fclose($file);

	system($cmd,$ret_val);
}

function cg_log() {
	$file = fopen("./cgminer.log","r");
	while(!feof($file)){
		$read .= fgets($file);
	}
	fclose($file);
	$pattern_hashmeter = '/\(5s\)[^\r]+/';
	preg_match_all($pattern_hashmeter, $read, $matches_hashmeter);
	$cg_log .= $matches_hashmeter[0][count($matches_hashmeter[0])-2];
	return $cg_log;
}

if (isset($_POST["ip"]) && isset($_POST["netmask"]) && isset($_POST["gateway"]) && isset($_POST["dns"])){
	$file = fopen("/etc/network/interfaces","w");
	fputs($file, "auto lo \n");
	fputs($file, "iface lo inet loopback \n");
	fputs($file, "iface eth0 inet static \n");
	fputs($file, "address ".$_POST["ip"]."\n");
	fputs($file, "netmask ".$_POST["netmask"]."\n");
	fputs($file, "gateway ".$_POST["gateway"]."\n");
	fclose($file);
	
	$file = fopen("/etc/resolv.conf","w");
	fputs($file, "nameserver ".$_POST["dns"]."\n");
	fclose($file);

	$file = fopen("./ip.log","w");
	fputs($file, $_POST["ip"]."\n");
	fputs($file, $_POST["netmask"]."\n");
	fputs($file, $_POST["gateway"]."\n");
	fputs($file, $_POST["dns"]."\n");
	fclose($file);

	system("sudo reboot > php.log",$ret_val);
}


if (isset($_POST["control"]))
{
	if($_POST["control"] == "stop"){
		cg_stop();
		$cg_status = "stop";
	}
	else{
		if (isset($_POST["pool1"]) && isset($_POST["id1"]) && isset($_POST["pwd1"])){
			$file = fopen("./user.log","w");
			fputs($file, $_POST["pool1"]."\n");
			fputs($file, $_POST["id1"]."\n");
			fputs($file, $_POST["pwd1"]."\n");
			fputs($file, $_POST["pool2"]."\n");
			fputs($file, $_POST["id2"]."\n");
			fputs($file, $_POST["pwd2"]."\n");
			fputs($file, $_POST["pool3"]."\n");
			fputs($file, $_POST["id3"]."\n");
			fputs($file, $_POST["pwd3"]."\n");
			
			fputs($file, $_POST["pool1_2"]."\n");
			fputs($file, $_POST["id1_2"]."\n");
			fputs($file, $_POST["pwd1_2"]."\n");
			fputs($file, $_POST["pool2_2"]."\n");
			fputs($file, $_POST["id2_2"]."\n");
			fputs($file, $_POST["pwd2_2"]."\n");
			fputs($file, $_POST["pool3_2"]."\n");
			fputs($file, $_POST["id3_2"]."\n");
			fputs($file, $_POST["pwd3_2"]."\n");

			fputs($file, $_POST["group"]."\n");

			fputs($file, $_POST["speed1"]."\n");
			fputs($file, $_POST["speed2"]."\n");
			fputs($file, $_POST["speed3"]."\n");
			fputs($file, $_POST["speed4"]."\n");
			fputs($file, $_POST["speed5"]."\n");
			fputs($file, $_POST["speed6"]."\n");
			fputs($file, $_POST["diff"]."\n");
			fputs($file, $_POST["starttype"]."\n");
			fclose($file);

			if ($_POST["group"]==1){
				cg_start($_POST["pool1"], $_POST["id1"], $_POST["pwd1"],
                                	 $_POST["pool2"], $_POST["id2"], $_POST["pwd2"],
                                	 $_POST["pool3"], $_POST["id3"], $_POST["pwd3"],
                                	 $_POST["speed1"], $_POST["speed2"], $_POST["speed3"], $_POST["speed4"], $_POST["speed5"], $_POST["speed6"],
                                	 $_POST["diff"]);
			}
			else{
				cg_start($_POST["pool1_2"], $_POST["id1_2"], $_POST["pwd1_2"],
                                 	 $_POST["pool2_2"], $_POST["id2_2"], $_POST["pwd2_2"],
                                	 $_POST["pool3_2"], $_POST["id3_2"], $_POST["pwd3_2"],
                                	 $_POST["speed1"], $_POST["speed2"], $_POST["speed3"], $_POST["speed4"], $_POST["speed5"], $_POST["speed6"],
                                	 $_POST["diff"]);
			}

			$cg_status = "run";
		}
		else
		{
			$cg_status = "stop";
		}
	}
}	
else
{
	$cg_status = cg_status();
}

$file = fopen("./user.log","r");
$read = fgets($file);
$pool1 = $read;
$read = fgets($file);
$id1 = $read;
$read = fgets($file);
$pwd1 = $read;

$read = fgets($file);
$pool2 = $read;
$read = fgets($file);
$id2 = $read;
$read = fgets($file);
$pwd2 = $read;

$read = fgets($file);
$pool3 = $read;
$read = fgets($file);
$id3 = $read;
$read = fgets($file);
$pwd3 = $read;

$read = fgets($file);
$pool1_2 = $read;
$read = fgets($file);
$id1_2 = $read;
$read = fgets($file);
$pwd1_2 = $read;

$read = fgets($file);
$pool2_2 = $read;
$read = fgets($file);
$id2_2 = $read;
$read = fgets($file);
$pwd2_2 = $read;

$read = fgets($file);
$pool3_2 = $read;
$read = fgets($file);
$id3_2 = $read;
$read = fgets($file);
$pwd3_2 = $read;

$read = fgets($file);
$group = $read;

$read = fgets($file);
$speed1 = $read;
$read = fgets($file);
$speed2 = $read;
$read = fgets($file);
$speed3 = $read;
$read = fgets($file);
$speed4 = $read;
$read = fgets($file);
$speed5 = $read;
$read = fgets($file);
$speed6 = $read;

$read = fgets($file);
$diff = $read;

$read = fgets($file);
$starttype = $read;

fclose($file);

$file = fopen("./ip.log","r");
$read = fgets($file);
$ip = $read;
$read = fgets($file);
$netmask = $read;
$read = fgets($file);
$gateway = $read;
$read = fgets($file);
$dns = $read;
fclose($file);

if ($cg_status=="run")
	$cg_log = cg_log();
else
	$cg_log = "";

if ($cg_status=="run")
	$cg_status_color = "green";
else
	$cg_status_color = "red";

if ($cg_status=="run")
	$cg_status_info = "RUN";
else
	$cg_status_info = "STOP";

$cg_button_info = "CGMINER SETTING CONFIRM";

//if ($cg_status=="run"){
//	$cg_radio_start = '';
//	$cg_radio_stop  = 'checked';
//}
//else{
	$cg_radio_start = 'checked';
	$cg_radio_stop  = '';
//}

if ($group==1){
	$cg_radio_group1 = 'checked';
	$cg_radio_group2 = '';
}
else{
	$cg_radio_group1 = '';
	$cg_radio_group2 = 'checked';
}

$ip_button_info = "NETWORK SETTING CONFIRM";

switch($speed1)
{
		case 1330: $cg_option_speed1_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed1_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed1_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed1_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed1_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed1_1280 = 'selected = \"selected\"';break;
	default:   $cg_option_speed1_1280  = 'selected = \"selected\"';
}

switch($speed2)
{
       		case 1330: $cg_option_speed2_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed2_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed2_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed2_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed2_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed2_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed2_1280  = 'selected = \"selected\"';
}

switch($speed3)
{
        	case 1330: $cg_option_speed3_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed3_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed3_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed3_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed3_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed3_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed3_1280  = 'selected = \"selected\"';
}

switch($speed4)
{
        	case 1330: $cg_option_speed4_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed4_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed4_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed4_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed4_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed4_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed4_1280  = 'selected = \"selected\"';
}

switch($speed5)
{
        	case 1330: $cg_option_speed5_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed5_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed5_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed5_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed5_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed5_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed5_1280  = 'selected = \"selected\"';
}

switch($speed6)
{
        	case 1330: $cg_option_speed6_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed6_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed6_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed6_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed6_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed6_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed6_1280  = 'selected = \"selected\"';
}

switch($diff)
{
	case 11 : $cg_option_diff_1024 = 'selected = \"selected\"';break;
	case 10 : $cg_option_diff_512  = 'selected = \"selected\"';break;
	case 9  : $cg_option_diff_256  = 'selected = \"selected\"';break;
	case 8  : $cg_option_diff_128  = 'selected = \"selected\"';break;
	case 7  : $cg_option_diff_64   = 'selected = \"selected\"';break;
	case 6  : $cg_option_diff_32   = 'selected = \"selected\"';break;
	case 5  : $cg_option_diff_16   = 'selected = \"selected\"';break;
	default : $cg_option_diff_128  = 'selected = \"selected\"';
}

if($starttype==1){
	$cg_option_starttype_webstart = '';
	$cg_option_starttype_autostart = 'selected = \"selected\"';

        $file = fopen("/etc/rc.local","w");
        fputs($file, "#!/bin/sh -e \n");
        fputs($file, "sleep 30 \n");
        fputs($file, "cd /var/www \n");
        fputs($file, "./run.sh \n");
        fputs($file, "exit 0 \n");
        fclose($file);
}
else{
	$cg_option_starttype_webstart = 'selected = \"selected\"';
	$cg_option_starttype_autostart = '';

	$file = fopen("/etc/rc.local","w");
        fputs($file, "#!/bin/sh -e \n");
        fputs($file, "exit 0 \n");
        fclose($file);
}

?>

<!DOCTYPE html>
<html>
<head>
	<meta http-equiv="Content-type" content="text/html; charset=utf-8" />
	<title>A2 - OC tweak version 1.0 by Emdje</title>

	<style type="text/css">
		div#header {font-size:18px; text-align:center}
		div#author {font-size:16px; text-align:center}
		div#ip     {font-size:16px; text-align:left}
		div#pool   {font-size:16px; text-align:left}
		div#hash   {font-size:16px; text-align:left}
		div#status {font-size:16px; text-align:left}
		div#log    {font-size:16px; text-align:left}
		div#footer {font-size:14px; text-align:center}
	</style>

	<script language="javascript">
	function showhashspeed()
	{
		var speed1=parseInt(document.getElementById("speed1").value);
		var speed2=parseInt(document.getElementById("speed2").value);
		var speed3=parseInt(document.getElementById("speed3").value);
		var speed4=parseInt(document.getElementById("speed4").value);
		var speed5=parseInt(document.getElementById("speed5").value);
		var speed6=parseInt(document.getElementById("speed6").value);
		var speed=speed1+speed2+speed3+speed4+speed5+speed6;
		document.getElementById("hashspeed").innerHTML="A2 TERMINATOR SPEED: "+(speed*12.4/1000)+"M/s";
	}
	</script>
</head>

<body onload="showhashspeed()">

<div id="header">
	<h1>A2 OC version 1.0 by Emdje</h1>
</div>

<div id="author">
	<p>INNOSILICON A2</p>
</div>

<div id="ip">
	<form action="" method="post">
		IP ADDRESS:   <input style="color:blue" type="text" name="ip"      size="11" value=<?php echo $ip ?> />
		NETMASK: <input style="color:blue" type="text" name="netmask" size="11" value=<?php echo $netmask ?> />
		GATEWAY:   <input style="color:blue" type="text" name="gateway" size="11" value=<?php echo $gateway ?> />
		DNS:      <input style="color:blue" type="text" name="dns"     size="11" value=<?php echo $dns ?> />
		<input type="submit" value="<?php echo $ip_button_info?>" />
	</form>
</div>

<div id="pool">
	<form action="" method="post">
		GROUP 1 POOL 1 ADDR: <input style="color:blue" type="text" name="pool1" size="35" value=<?php echo $pool1 ?> />
		POOL 1 ID: <input style="color:blue" type="text" name="id1" size="10" value=<?php echo $id1 ?> />
		POOL 1 PWD: <input style="color:blue" type="text" name="pwd1" size="10" value=<?php echo $pwd1 ?> /> <br \>
		GROUP 1 POOL 2 ADDR: <input style="color:blue" type="text" name="pool2" size="35" value=<?php echo $pool2 ?> />
		POOL 2 ID: <input style="color:blue" type="text" name="id2" size="10" value=<?php echo $id2 ?> />
		POOL 2 PWD: <input style="color:blue" type="text" name="pwd2" size="10" value=<?php echo $pwd2 ?> /> <br \>
		GROUP 1 POOL 3 ADDR: <input style="color:blue" type="text" name="pool3" size="35" value=<?php echo $pool3 ?> />
		POOL 3 ID: <input style="color:blue" type="text" name="id3" size="10" value=<?php echo $id3 ?> />
		POOL 3 PWD: <input style="color:blue" type="text" name="pwd3" size="10" value=<?php echo $pwd3 ?> /> <br \>
		GROUP 2 POOL 1 ADDR: <input style="color:blue" type="text" name="pool1_2" size="35" value=<?php echo $pool1_2 ?> />
		POOL 1 ID: <input style="color:blue" type="text" name="id1_2" size="10" value=<?php echo $id1_2 ?> />
		POOL 1 PWD: <input style="color:blue" type="text" name="pwd1_2" size="10" value=<?php echo $pwd1_2 ?> /> <br \>
		GROUP 2 POOL 2 ADDR: <input style="color:blue" type="text" name="pool2_2" size="35" value=<?php echo $pool2_2 ?> />
		POOL 2 ID: <input style="color:blue" type="text" name="id2_2" size="10" value=<?php echo $id2_2 ?> />
		POOL 2 PWD: <input style="color:blue" type="text" name="pwd2_2" size="10" value=<?php echo $pwd2_2 ?> /> <br \>
		GROUP 2 POOL 3 ADDR: <input style="color:blue" type="text" name="pool3_2" size="35" value=<?php echo $pool3_2 ?> />
		POOL 3 ID: <input style="color:blue" type="text" name="id3_2" size="10" value=<?php echo $id3_2 ?> />
		POOL 3 PWD: <input style="color:blue" type="text" name="pwd3_2" size="10" value=<?php echo $pwd3_2 ?> /> <br \>

		GROUP 1 POOL SELECT:<input type="radio" name="group" value="1" <?php echo $cg_radio_group1 ?> />
                GROUP 2 POOL SELECT:<input type="radio" name="group" value="2" <?php echo $cg_radio_group2 ?> /> <br \>

		BOARD 1 SPEED: <select name="speed1" id="speed1" onchange="showhashspeed()">
			  	<option value="1330" <?php echo $cg_option_speed1_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed1_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed1_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed1_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed1_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed1_1280 ?> >15.87M(1280Mhz)</option> 
			  </select>
		BOARD 2 SPEED: <select name="speed2" id="speed2" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed2_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed2_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed2_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed2_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed2_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed2_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 3 SPEED: <select name="speed3" id="speed3" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed3_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed3_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed3_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed3_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed3_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed3_1280 ?> >15.87M(1280Mhz)</option>
                </select> <br />
		BOARD 4 SPEED: <select name="speed4" id="speed4" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed4_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed4_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed4_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed4_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed4_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed4_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 5 SPEED: <select name="speed5" id="speed5" onchange="showhashspeed()">
				<option value="1330" <?php echo $cg_option_speed5_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed5_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed5_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed5_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed5_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed5_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 6 SPEED: <select name="speed6" id="speed6" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed6_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed6_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed6_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed6_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed6_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed6_1280 ?> >15.87M(1280Mhz)</option>
                         </select> <br \>
		DEVICE INITIAL DIFF: <select name="diff">
			  	<option value="12" <?php echo $cg_option_diff_2048 ?> >2048</option>
				<option value="11" <?php echo $cg_option_diff_1024 ?> >1024</option> 
			  	<option value="10" <?php echo $cg_option_diff_512  ?> > 512</option> 
			  	<option value="9"  <?php echo $cg_option_diff_256  ?> > 256</option> 
			  	<option value="8"  <?php echo $cg_option_diff_128  ?> > 128</option> 
			  	<option value="7"  <?php echo $cg_option_diff_64   ?> >  64</option> 
			  	<option value="6"  <?php echo $cg_option_diff_32   ?> >  32</option> 
			  	<option value="5"  <?php echo $cg_option_diff_16   ?> >  16</option> 
			  </select> (AUTO UP TO 4096) <br \>
		START TYPE: <select name="starttype">
                                <option value="0" <?php echo $cg_option_starttype_webstart ?>  >WEBSITE MANUAL START</option>
                                <option value="1" <?php echo $cg_option_starttype_autostart ?> >POWERON AUTO START</option>
                          </select> <br \>
		CGMINER START:	  <input type="radio" name="control" value="start" <?php echo $cg_radio_start?> />
		CGMINER STOP:	  <input type="radio" name="control" value="stop"  <?php echo $cg_radio_stop?> />
			  <input type="submit" value="<?php echo $cg_button_info?>" />
	</form>
</div>


<div id="hash">
	<p id="hashspeed" style="color:blue"></p>
</div>

<div id="status">
	<form action="./miner.php" target="_blank" method="post">
		STATUS:<font color=<?php echo $cg_status_color?>> <?php echo $cg_status_info?> </font> <input type="submit" value="REALTIME STATUS MONITOR" />
	</form>
</div>

<div id="log">
	<br \>
	<form action="" method="post">
		HASHMETER:<input type="submit" value="REFRESH" />
	</form>
	<?php echo $cg_log?>
</div>



<div id="footer">OC tweak version 1.0 by Emdje</div> 
<div id="footer">Donate btc: 1FiHCFcP4ovbV89nGhYEMWXSZsWnGUASSe</div>

</body>
</html>

Save that over the index.php that is in the /var/www folder.

This will give you the possibility to set an initial diff of 2048 as well

I have tried 1340MHz which gave about 50% HW errors so now I am trying 1300, later on (right now my rig is rented), I will try a step higher (maybe even just 5MHz).

If you are happy with it you can of course donate some btc to: 1FiHCFcP4ovbV89nGhYEMWXSZsWnGUASSe

[emdje]

For the people who don't know how to do this, they can follow this tutorial to ssh into the pi: http://www.youtube.com/watch?v=ZkvHHkWmKSY

When my rig is not rented anymore I will read the image from the card and upload it on dropbox for download.

[JoostB]

Thanks!, when I have some time I will take a look at it.
Although I'm afraid that my current A2 can't handle much more.
With the first blade at 1280 and the second at 1200Mhz. I see at the moment 12.7% HW errors.
This is very strange because it used to be something like 3.7% in the past. I have to take a look at this.

Edit:
I made a mistake by calculating HW-errors*100/accepted-shares, but I should also take the stratum difficulty into account.
So the actual percentage of HW-errors is much lower.
 

[VictorBC]

Well I have already prepared my miners. Now I have another problem. A controller does not work with more than one miner? If you see in the images. I tried to connect two units to a PI. The script Zeus detects  me two usb. But only one works. You can connect more than one at a time?

Thanks.

PD. Makes a lot of NOISE.    I'll have to put them somewhere else and try to isolate some noise.  any idea?