S17+ S9k/SE T17 S17/Pro DR5 B7 Others All Overclock per chip and Voltage Control

[supersonic]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

[chipless]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

Thats so odd.... if it took there should be no sig check but yet you say it updated the miner compile date from the 16th to may 27. I need to look into it more and it may not happen till next week when I get some more test boards and or miners. This is definitely puzzling me. It is like part updated and other parts didnt and i dont see how that can happen.

[chipless]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

I think I found the problem. The wrong uImage got packed with it. Hopefully this is the right one that was origionally tested. Here is a link if anyone wants to try again the S17/Pro. Please report if it worked this time.

S17 New uImage 7/28/19

https://drive.google.com/file/d/1KwDXxCbG2sXylAvbq8XnVZVhMXDClUos/view?usp=sharing

[supersonic]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

I think I found the problem. The wrong uImage got packed with it. Hopefully this is the right one that was origionally tested. Here is a link if anyone wants to try again the S17/Pro. Please report if it worked this time.

S17 New uImage 7/28/19

https://drive.google.com/file/d/1KwDXxCbG2sXylAvbq8XnVZVhMXDClUos/view?usp=sharing

Yeah, still the same... Cannot connect and no signature, altho this time miner got up much faster, no 20min struggle

[chipless]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

I think I found the problem. The wrong uImage got packed with it. Hopefully this is the right one that was origionally tested. Here is a link if anyone wants to try again the S17/Pro. Please report if it worked this time.

S17 New uImage 7/28/19

https://drive.google.com/file/d/1KwDXxCbG2sXylAvbq8XnVZVhMXDClUos/view?usp=sharing

Yeah, still the same... Cannot connect and no signature, altho this time miner got up much faster, no 20min struggle

I am going to have to go thru the uImages I have in the last yr bitmain has used about 8 or so different ones. The one i just did was the latest one they are using on a few different boards

[chipless]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

I think I found the problem. The wrong uImage got packed with it. Hopefully this is the right one that was origionally tested. Here is a link if anyone wants to try again the S17/Pro. Please report if it worked this time.

S17 New uImage 7/28/19

https://drive.google.com/file/d/1KwDXxCbG2sXylAvbq8XnVZVhMXDClUos/view?usp=sharing

Yeah, still the same... Cannot connect and no signature, altho this time miner got up much faster, no 20min struggle

I just uploaded two more to try. Let me know the results plz

https://drive.google.com/file/d/1V7pv-4OSUqwI4NBzEWZgK8ayPSYhYcnb/view?usp=sharing

https://drive.google.com/file/d/1gD3yk452YTfX0vgdeRFZGeuBvW4jrmx6/view?usp=sharing

[chipless]

Antminer S9k Unlocked SD image. Unlocks SSH and Disables Signature Checking. Nothing more was done to the image. To be applied using a SD card.

See first post for download link

[supersonic]

When i uploaded it on S17(non pro) with may 17'th firmware already on it the effect was the same and no ssh unlock

If you take the uramdisk.image.gz from the SD bin folder can you upload it thru the web gui upgrade on the miner we are talking about.

negative, cannot find signature

I think I found the problem. The wrong uImage got packed with it. Hopefully this is the right one that was origionally tested. Here is a link if anyone wants to try again the S17/Pro. Please report if it worked this time.

S17 New uImage 7/28/19

https://drive.google.com/file/d/1KwDXxCbG2sXylAvbq8XnVZVhMXDClUos/view?usp=sharing

Yeah, still the same... Cannot connect and no signature, altho this time miner got up much faster, no 20min struggle

I just uploaded two more to try. Let me know the results plz

https://drive.google.com/file/d/1V7pv-4OSUqwI4NBzEWZgK8ayPSYhYcnb/view?usp=sharing

https://drive.google.com/file/d/1gD3yk452YTfX0vgdeRFZGeuBvW4jrmx6/view?usp=sharing

Aaand none of them working

[chipless]

Ok, I will wait until I get a board or machine to figure out what files was used. Hopefully this week if all goes ok.

Thanks for trying them at least. I only have the latest releases from bitmain so I cant look at an older version to see what the deal is. I have too many files here and need to reorganize them again so I dont certain ones crossed.


Miners For Sale Located in South Eastern U.S.
2 x Antminer Z9 Mini's Batch 1 - 1 gets 16.7 k/sol and the other gets 16.5 k/sol $325 each or $600 for both
2 x Antminer Z9 Mini,s Batch 4 - Both get right at 16.2 k/sol   $300 each or $575 for both

Plus $75 shipping to lower 48, anywhere else we would have to figure out the shipping

The batch 1's are clocked at 768m and the batch 4's 718-731m depending on temps it will maintain right at 16 k/sol

PM for further purchase details or to make an offer, I will accept Zcash or BTC

MINERS HAVE BEEN SOLD.....

[chipless]

Aaand none of them working

Give this one a try for the S17 or S17 Pro, I replaced 2 different file in this one. The devicetree and uimage

https://drive.google.com/file/d/1uW5jBAa_2HzJtFzIS_w6dpoiMoAsl3ai/view?usp=sharing

[efudd]

Aaand none of them working

Give this one a try for the S17 or S17 Pro, I replaced 2 different file in this one. The devicetree and uimage

https://drive.google.com/file/d/1uW5jBAa_2HzJtFzIS_w6dpoiMoAsl3ai/view?usp=sharing

... devicetree.dtb does not have anything to do with 'unlocking SSH' in any way, shape, or form. It really has nothing to do with the 'firmware' at all.

-j

[chipless]

Aaand none of them working

Give this one a try for the S17 or S17 Pro, I replaced 2 different file in this one. The devicetree and uimage

https://drive.google.com/file/d/1uW5jBAa_2HzJtFzIS_w6dpoiMoAsl3ai/view?usp=sharing

... devicetree.dtb does not have anything to do with 'unlocking SSH' in any way, shape, or form. It really has nothing to do with the 'firmware' at all.

-j

I didnt say it did but it is needed for booting from the sd card.

[chipless]

New release for the Z11e....May also work on other  Z11's

https://drive.google.com/file/d/1sYUJOb6ATwYHuJLb-TlrVlOpH2RtssAp/view?usp=sharing

[The Real Tyler Durden]

Just sharing some observations. The beta 3 firmware held over 151-153 ksols for most of the day, but settled back down to 145 ksols recently with chip temps in the 81c-85c with fans set to 100%. Another Z11 twelve inches away running Bitmain 4/23 FW is at 70c-73c with fans at 95%. Re-releasing an April 23 version to cut down on hardware errors at the very least (and any other positive unintended consequences) seems like a no-brainer.
--------------------------------------------------------------------------------------------------
Beta 3:

Elapsed          MH/S(RT)          MH/S(avg)
8h44m23s      146.45              145.66

HW Errors: 7,813

Power Draw: 1780w @ 120v
---------------------------------------------------------------------------------------------------
Bitmain 4/23:

Elapsed          MH/S(RT)          MH/S(avg)
8h59m26s     132.37              137.99

HW Errors: 649

Power Draw: 1492w @ 120v
----------------------------------------------------------------------------------------------------

How are you running a z11 on 120v? I dont have access to to 220-240 so Im curious to hear about your 120v setup, thanks

[chipless]

Just sharing some observations. The beta 3 firmware held over 151-153 ksols for most of the day, but settled back down to 145 ksols recently with chip temps in the 81c-85c with fans set to 100%. Another Z11 twelve inches away running Bitmain 4/23 FW is at 70c-73c with fans at 95%. Re-releasing an April 23 version to cut down on hardware errors at the very least (and any other positive unintended consequences) seems like a no-brainer.
--------------------------------------------------------------------------------------------------
Beta 3:

Elapsed          MH/S(RT)          MH/S(avg)
8h44m23s      146.45              145.66

HW Errors: 7,813

Power Draw: 1780w @ 120v
---------------------------------------------------------------------------------------------------
Bitmain 4/23:

Elapsed          MH/S(RT)          MH/S(avg)
8h59m26s     132.37              137.99

HW Errors: 649

Power Draw: 1492w @ 120v
----------------------------------------------------------------------------------------------------

How are you running a z11 on 120v? I dont have access to to 220-240 so Im curious to hear about your 120v setup, thanks

In order to run a Z11 on 120v you need to stay at about 940mv or less so you dont trip the psu. At that voltage you should be able to go to about 787-793 max freq.

Using a APW7 will get is more on the lower side since it is only 1000watts at 120v where the apw3 is 1200watts at 120v the 3 will allow a little higher voltage and freq.

[The Real Tyler Durden]

thanks.... I think imma just go with 3 A9 Zmasters.... little less efficient but I pay low elec rates and the Zmasters are made to run on 120v or 240v without an issue so that will just be easier for me. Now lets just hope zcash hits $100 again soon!!! (after I get my miners, LoL, dont want them raising the price on me before I pay for them)

[chipless]

Z11 Series Firmware images are available 100% FREE....I have recovered the cost of development and I am now offering the Chipless Private Version for FREE

Download Links on first post

[vifedotov86]

Z11 Series Firmware images are available 100% FREE....I have recovered the cost of development and I am now offering the Chipless Private Version for FREE

Download Links on first post

Hello this firmware workin Z9 not mini ?

[chipless]

Z11 Series Firmware images are available 100% FREE....I have recovered the cost of development and I am now offering the Chipless Private Version for FREE

Download Links on first post

Hello this firmware workin Z9 not mini ?

This firmware is for the Z11 if you need Z9 not mini firmware look here https://bitcointalk.org/index.php?topic=5108396.0

[chipless]

Update on Innosilicon A9 Firmware Overclock and Voltage mod.

Working with another member we have made some progress on the A9 firmware. We still have a bit to go before anything can be released the highest hash rate so far he reported was 63 k/sol after running 24 hrs. Here are some of the logs. As you can see we can control voltage and max freq but still needs some work.

Aug 26 03:20:32 InnoMiner mcompat_lib[1331]: chain2: set vid 160 -> 225
Aug 26 03:21:11 InnoMiner mcompat_lib[1331]: chain2: chip0 set pll 302(912MHz) -> 385(1628MHz)
Aug 26 03:21:12 InnoMiner mcompat_lib[1331]: chain2: set tsadc divider
Aug 26 03:21:12 InnoMiner mcompat_lib[1331]: chain2: set spi speed 4
-
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain detect finished. 3 chains detected.

Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain0: chip1 core number(31) < 32
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain0: chip12 core number(31) < 32
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:1,vol:989
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:2,vol:973
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:3,vol:989
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:4,vol:1023
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:5,vol:1005
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:6,vol:1010
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:7,vol:1004
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:8,vol:1001
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:9,vol:1003
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:10,vol:1021
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:11,vol:996
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:0,chip:12,vol:1021
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain0: detected 12 chips / 382 cores

pat_lib[1331]: chain1: chip7 core number(31) < 32
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain1: chip8 core number(30) < 32
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:1,chip:1,vol:1012
Aug 26 03:21:13 InnoMiner mcompat_lib[1331]: chain:1,chip:2,vol:1006
Aug 28 06:36:54 InnoMiner mcompat_lib[1328]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Aug 28 06:36:56 InnoMiner mcompat_lib[1328]: chain2: set spi speed 6
Aug 28 06:36:56 InnoMiner mcompat_lib[1328]: chain2: chip0 set pll 150(300MHz) -> 302(912MHz)
Aug 28 06:36:58 InnoMiner mcompat_lib[1328]: chain2: set vid 180 -> 225
Aug 28 06:37:25 InnoMiner mcompat_lib[1328]: chain2: chip0 set pll 302(912MHz) -> 385(1700MHz)
Aug 28 06:37:26 InnoMiner mcompat_lib[1328]: chain2: set tsadc divider
Aug 28 06:37:26 InnoMiner mcompat_lib[1328]: chain2: set spi speed 4
Aug 28 06:37:27 InnoMiner mcompat_lib[1328]: chain2: enable BISTMASK
Aug 28 06:37:27 InnoMiner mcompat_lib[1328]: chain2: BISTSTART
Aug 28 06:37:27 InnoMiner mcompat_lib[1328]: chain2: detect finished
Aug 28 07:12:53 InnoMiner mcompat_lib[1331]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Aug 28 07:12:55 InnoMiner mcompat_lib[1331]: chain2: set spi speed 6
Aug 28 07:12:55 InnoMiner mcompat_lib[1331]: chain2: chip0 set pll 150(300MHz) -> 302(912MHz)
Aug 28 07:12:57 InnoMiner mcompat_lib[1331]: chain2: set vid 160 -> 225
Aug 28 07:13:36 InnoMiner mcompat_lib[1331]: chain2: chip0 set pll 302(912MHz) -> 385(1725MHz)
Aug 28 07:13:37 InnoMiner mcompat_lib[1331]: chain2: set tsadc divider
Aug 28 07:13:37 InnoMiner mcompat_lib[1331]: chain2: set spi speed 4