chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
November 15, 2019, 10:53:32 AM |
|
This is the T17 firmware and yes it means if it finds less chips it will still enable the rest and keep running instead of shutting down the whole board
The S17 would be the same if it was encoded by the developer. My S17 is not available for public release
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
November 18, 2019, 05:48:55 AM |
|
Antminer S9k - Full version Autotune and all the bells and whistles coming soon S9k 16th @ 1200-1225watts finalizing testing and will be available in the next few days
Unlocked SD image. Unlocks SSH and Disables Signature Checking. Nothing more was done to the image. To be applied using a SD card.https://drive.google.com/file/d/1EievYtO1mpnX8IHd8LyPYS9PLmtvygRm/view?usp=sharing
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
whitefire990
Copper Member
Member
Offline
Activity: 166
Merit: 84
|
|
November 23, 2019, 04:15:20 PM |
|
I just started using the Z11 2.3 Fuddware on 4 x Z11. This is the first time I have used any Fuddware. The firmware works great for around 10 hours. Then, the machines stay working (as shown in control panel), but LSTime (last share time) keeps increasing as no new shares are submitted to the pool. This never ends; hours and hours will pass. Poolside hash rate drops to zero. A reboot fixes everything. But very annoying to reboot every 10 hours. Any idea what the problem is? Happened on Luxor and Suprnova, the only 2 pools I tried. Same deal. Obviously dev fee kicks in once in a while but not for hours and hours.
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
November 23, 2019, 08:01:22 PM |
|
I just started using the Z11 2.3 Fuddware on 4 x Z11. This is the first time I have used any Fuddware. The firmware works great for around 10 hours. Then, the machines stay working (as shown in control panel), but LSTime (last share time) keeps increasing as no new shares are submitted to the pool. This never ends; hours and hours will pass. Poolside hash rate drops to zero. A reboot fixes everything. But very annoying to reboot every 10 hours. Any idea what the problem is? Happened on Luxor and Suprnova, the only 2 pools I tried. Same deal. Obviously dev fee kicks in once in a while but not for hours and hours.
You will have to contact efudd i dont offer troubleshooting for his stuff because he has control of the miner somewhat and it would be useless to attempt. I do offer the z11 dev free firmware free and the link can be found on the first post of this thread.
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
efudd
Member
Offline
Activity: 504
Merit: 51
|
|
November 25, 2019, 07:25:58 PM |
|
I just started using the Z11 2.3 Fuddware on 4 x Z11. This is the first time I have used any Fuddware. The firmware works great for around 10 hours. Then, the machines stay working (as shown in control panel), but LSTime (last share time) keeps increasing as no new shares are submitted to the pool. This never ends; hours and hours will pass. Poolside hash rate drops to zero. A reboot fixes everything. But very annoying to reboot every 10 hours. Any idea what the problem is? Happened on Luxor and Suprnova, the only 2 pools I tried. Same deal. Obviously dev fee kicks in once in a while but not for hours and hours.
Luxor had issues this past weekend that may be what you saw. I can't speak to Suprnova. This is not my thread, so send me a PM with your supportID. -j
|
|
|
|
hxminer
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 12, 2019, 06:33:02 AM |
|
can you send me test?
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 12, 2019, 07:26:48 PM |
|
can you send me test?
Send you test what?
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
baladio16000
Newbie
Offline
Activity: 11
Merit: 1
|
|
December 18, 2019, 12:19:19 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 18, 2019, 12:25:18 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
octomob
Member
Offline
Activity: 155
Merit: 12
Crypto Mining Hardware for Sale
|
|
December 19, 2019, 03:12:04 AM |
|
Should we expect the final version of the firmware to be released soon?
|
PM me for ASIC / GPU mining hardware private sale offers
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 19, 2019, 04:57:28 AM |
|
Should we expect the final version of the firmware to be released soon? Hopefully within the next week had a couple miner goes down i had to repair.
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
algcool
Jr. Member
Offline
Activity: 82
Merit: 1
Cooldragon
|
|
December 21, 2019, 02:38:01 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job.
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 21, 2019, 02:43:25 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job. you can use a script to unlock all the miners at the same time then load new firmware to all of them
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
bbenites
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 24, 2019, 02:20:52 PM |
|
I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 24, 2019, 08:52:47 PM |
|
I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems
Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
algcool
Jr. Member
Offline
Activity: 82
Merit: 1
Cooldragon
|
|
December 25, 2019, 01:10:08 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job. you can use a script to unlock all the miners at the same time then load new firmware to all of them I am really like to use the script to unlock the miners, do you know how to make it?
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 25, 2019, 02:16:00 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job. you can use a script to unlock all the miners at the same time then load new firmware to all of them I am really like to use the script to unlock the miners, do you know how to make it? As far as I know there is no exploit available on the Z11 to unlock it without using Sd
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
bbenites
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 25, 2019, 10:55:20 AM |
|
I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems
Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about im using Efudd 2.3 do you have 2.4 how I can get a license ? so I do not have to mine in Luxor
|
|
|
|
chipless (OP)
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
December 25, 2019, 08:28:49 PM |
|
I testet the 2.3 software with one Z11, i have the same issues at Luxor with Z11 2.3, miner is working but after a few hours the pool shows no hashrate for my miner anymore, have to restart then the hash rate comes back, this makes no sense at all, im loosing more then im winning with this software, I better go back to the Antminer firmware, then I do not have this problems
Are you using efudd firmware or chipless firmware. I have 2.4 released. efudd is fw is 2.3. If you get issues on luxor that you will have to contact them about im using Efudd 2.3 do you have 2.4 how I can get a license ? so I do not have to mine in Luxor You need to contact efudd i dont support his firmware .... I have my own 2.4 version that can be found on the main page of this thread. It is free no license needed and no dev fee
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
algcool
Jr. Member
Offline
Activity: 82
Merit: 1
Cooldragon
|
|
December 26, 2019, 03:22:00 AM |
|
I have the Z11, and have loaded firmware made by the manufacturer only. Do I have to do anything special to load your firmware onto the miner, and do I have to do anything special to load a regular version afterwards from the manufacturer? I haven't seen clear instructions, and I'm new to custom firmware.
you will have to unlock the miner with a SD card first. The Sd image can be found on the first post of this thread. After that you can go back to stock by upgrading from the miners gui Is there a method that no need to usd the SD card to reflash the firmware of the miner? if flash more than 20pcs miners in the farm, it is not a easy job. you can use a script to unlock all the miners at the same time then load new firmware to all of them I am really like to use the script to unlock the miners, do you know how to make it? As far as I know there is no exploit available on the Z11 to unlock it without using Sd Thanks a lot! Sir, is it the same situation as the miners T17, S17?
|
|
|
|
|