n0nce
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 05, 2022, 09:53:03 PM Last edit: January 05, 2022, 10:55:13 PM by n0nce |
|
Can someone solve me these queries that I have? So, I've gone to testnet.boltz.exchange to increase my receiving capacity as a lightning node. You just give LN-BTC and receive BTC, hence you've increased your receiving capacity by spending some your channel's reserve. Alright, so I've tried this with my Electrum. I opened up a channel with somebody, sent the LN-BTC got my BTC, everything went fine. But, what exactly happens when I try the same with my lightning node? Well, it's as the messages say. You have no route to Boltz. Might be due to them having / having had a maintenance today; not sure if it's over yet. If it is, you need to either create a channel with them directly or with someone who does. Secondly, why does my lightningd log show these?
These are the various attempts to route the payment. Regarding the 'parts'; payments can / are split and sent through various routes and nodes. Especially if from one hop to the next there exists no single channel with sufficient capacity to route the whole sum. Thirdly, why does the lightning daemon closes when I close the Windows' cmd? Normally, when I'm ssh-ing using the cmd and close it, nothing changes from the RPi.
Because if you start lightning via ./lightningd, the process runs inside the SSH process; when that one is killed (by closing the SSH session), LN does as well. Probably in your other experiences with SSH, you started stuff as a service or the binaries detached into independent processes by themselves. For a quick hack, you can kind of 'force detach' it by adding a & at the end like this: ./lightningd &; however I'd recommend setting up a systemd service for your node. For creating such service, you can refer to my OpenSUSE node setup guide, last line of step 8 as well as step 9 and 10.
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7958
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2022, 07:20:25 PM Merited by JayJuanGee (1) |
|
Well, it's as the messages say. You have no route to Boltz. I successfully opened a channel with Boltz to make it work. It appears that the lightning daemon just needed a restart. Okay, so I sent them 0.0025 LN-tBTC and have probably increased my receiving capacity. Shouldn't I now be able to send my node a few sats? Why do I still get the same error? Is there any other client you advice me to use instead of Electrum? No matter how much I've googled I haven't understood why this happens... For a quick hack, you can kind of 'force detach' it by adding a & at the end like this: ./lightningd & Nice! I didn't know that.
|
|
|
|
n0nce
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 06, 2022, 08:26:09 PM |
|
Well, it's as the messages say. You have no route to Boltz. I successfully opened a channel with Boltz to make it work. It appears that the lightning daemon just needed a restart. Okay, so I sent them 0.0025 LN-tBTC and have probably increased my receiving capacity. Shouldn't I now be able to send my node a few sats? Why do I still get the same error? I'm not sure I fully understand your setup. You have Electrum on a different machine than the one running your LN node and try to send Lightning BTC from Electrum to your node? Unfortunately, I am not 100% sure how Lightning works in Electrum. From the error message, it seems that Electrum tries to open a new channel to your node, instead of going through an existing Lightning route. Especially with the transaction screen that you're showing. With mining fee and stuff; that's clearly an on-chain transaction. Is there any other client you advice me to use instead of Electrum? No matter how much I've googled I haven't understood why this happens...
For my testing on testnet, when I need to try connections from different machines (same network, different network etc.), I usually use pruned Core with normal c-lightning or - what I once had on a laptop - lnd with Neutrino backend. Very quick to setup and light on storage.
|
|
|
|
Wind_FURY
Legendary
Offline
Activity: 3024
Merit: 1881
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 07, 2022, 11:06:05 AM |
|
Plus Chain Anals’ tracking of Lightning transactions actually helps increase the liquidity in the network and helps it scale, and makes it function better. ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Just like scammers and governments support the Tor network by running their own compromised nodes ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) As long as enough scammers and competing governments join, and as long as users are aware of the risks, none of this stops the network. But there’s a big difference between routing traffic in TOR, and routing transactions in the Lightning Network. Eventually, a node operator will need to take opportunity costs into account, and must be incentivized to maintain “staking” his/her capital. Chain Anals’ increasing need to montior Lightning = demand for Bitcoin. Plus with their business model, they should be telling everyone to use Bitcoin. No users = no transactions to monitor = no Chain Anals. ![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
|
| .SHUFFLE.COM.. | ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ | ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ | . ...Next Generation Crypto Casino... |
|
|
|
Rath_ (OP)
aka BitCryptex
Legendary
Offline
Activity: 1876
Merit: 3132
|
If you ever wondered how often someone is penalized for fraudulent behaviour, forkmonitor keeps track of all penalty transactions ever broadcast. Apparently, there have been 419 unsuccessful cheat attempts with a total of ~5.13 BTC at stake since the end of 2017.
|
|
|
|
PrimeNumber7
Copper Member
Legendary
Offline
Activity: 1652
Merit: 1899
Amazon Prime Member #7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 09, 2022, 07:57:44 PM |
|
If you ever wondered how often someone is penalized for fraudulent behaviour, forkmonitor keeps track of all penalty transactions ever broadcast. Apparently, there have been 419 unsuccessful cheat attempts with a total of ~5.13 BTC at stake since the end of 2017. I don't think all these transactions are necessarily "cheat attempts". For example, I have read about instances in which an LN node failed, the user restored from a backup that did not have the correct channel state, which resulted in the backup-restored node trying to close the channel via an old channel state.
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7958
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 11, 2022, 09:00:37 PM |
|
What's the best channel_capacity/network_contribution ratio? For instance, would it be more contributive to open 100 of 0.01 BTC rather than 2 of 0.50 BTC? Also, how do I choose the proper nodes to do this? I had read about triangles, but I'm not sure if that's what I'm talking about. Are there any helpful guiding threads in here?
I just want to increase the capacity in testnet. I have few tBTC lying around (~4.5 tBTC) and I prefer using them in a way to be useful than having them in my dusty cold storage.
|
|
|
|
Rath_ (OP)
aka BitCryptex
Legendary
Offline
Activity: 1876
Merit: 3132
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2022, 12:01:31 AM |
|
For example, I have read about instances in which an LN node failed, the user restored from a backup that did not have the correct channel state, which resulted in the backup-restored node trying to close the channel via an old channel state.
You're right. Although, it's fairly uncommon to run an old backup, even unintentionally. LND by default generates static backups, which can be only used to request the other party to close a channel. C-lightning's backup plugin backups the whole channel database to a remote directory/drive and it constantly overwrites old backups. What's the best channel_capacity/network_contribution ratio? For instance, would it be more contributive to open 100 of 0.01 BTC rather than 2 of 0.50 BTC?
100 channels sound better. If someone undercut (in terms of fees) only some of your channels, it should not impact your routing effectiveness greatly. Also, you are more likely to get more routing attempts through you as long as you choose channels and set your fees reasonably. Also, how do I choose the proper nodes to do this?
That's one of the trickiest parts of running a Lightning node. I usually select some random medium-sized nodes from either amboss.space or 1ml.com and then check the shortest path from my node to theirs using lnrouter.app. Don't forget that path finding algorithms also take the route length into consideration. Also, how do I choose the proper nodes to do this? I had read about triangles, but I'm not sure if that's what I'm talking about.
You can learn about liquidity triangle/square/pentagon swaps here. Once you set up a mainnet node, you can use that website to find partners for the swap. Liquidity swaps might actually improve your routing performance. Yesterday, I performed a triangle swap with two other bitcointalk members. Each of us opened a 0.05 BTC channel to the other person. This way, we gained additional 0.10 BTC capacity, which means that this swap has doubled my node's capacity. I paid 222 sat for the opening transaction. We dropped the fees to 0 and TheJuice's script took care of the rebalancing. On the same day, I routed 6 transactions from the channel I opened and I got paid 222.76 satoshi. The channel paid itself off in just a few hours.
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7958
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 15, 2022, 04:27:36 PM |
|
How do I open multiple channels in one transaction? Probably with multifundchannel, it's just that I can't understand the proper way to run it. It doesn't give an example in docs and I didn't find anything at github. How do you insert an array, or in this situation the destination, properly? There are lots of ways I can think of... node1, node2 {node1, node2} [node 1, node2] etc. None of the above works.
|
|
|
|
Rath_ (OP)
aka BitCryptex
Legendary
Offline
Activity: 1876
Merit: 3132
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 15, 2022, 05:24:50 PM |
|
How do you insert an array, or in this situation the destination, properly? There are lots of ways I can think of...
This should work for you: lightning-cli multifundchannel -k destinations='[{"id": "node1" ,"amount": amount1},{"id": "node2" , "amount": amount2}]' feerate=1000perkb minchannels=2 Make sure to change minchannels if you add more destinations.
|
|
|
|
darkv0rt3x
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2022, 10:50:14 AM Merited by JayJuanGee (1) |
|
How do you insert an array, or in this situation the destination, properly? There are lots of ways I can think of...
This should work for you: lightning-cli multifundchannel -k destinations='[{"id": "node1" ,"amount": amount1},{"id": "node2" , "amount": amount2}]' feerate=1000perkb minchannels=2 Make sure to change minchannels if you add more destinations. I never tried this one before, but if even like that, it doesn't work, you may have to escape the double quotes with a backslash. I usually run into problems when I use these commands that requires arrays of json objects. For instance, to create a raw transaction I actually have to use: bitcoin-cli createrawtransaction "[{\"txid\":\"tx_hash_here\", \"vout\":1}]" "[{\"bitcoin_adress_here\":0.05},{\"bitcoin_change_adress_here\":0.049}]" 0 true
As you see, there are some double quotes that needs to be escaped (the ones inside the json array object), otherwise, bash will "consume" a layer of them and then, the json object is "sent" to the RPC command wrongly constructed!
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
ABCbits
Legendary
Offline
Activity: 2982
Merit: 7821
Crypto Swap Exchange
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2022, 11:41:26 AM Merited by JayJuanGee (1) |
|
This should work for you: lightning-cli multifundchannel -k destinations='[{"id": "node1" ,"amount": amount1},{"id": "node2" , "amount": amount2}]' feerate=1000perkb minchannels=2 Make sure to change minchannels if you add more destinations. I never tried this one before, but if even like that, it doesn't work, you may have to escape the double quotes with a backslash. I usually run into problems when I use these commands that requires arrays of json objects. For instance, to create a raw transaction I actually have to use: bitcoin-cli createrawtransaction "[{\"txid\":\"tx_hash_here\", \"vout\":1}]" "[{\"bitcoin_adress_here\":0.05},{\"bitcoin_change_adress_here\":0.049}]" 0 true
As you see, there are some double quotes that needs to be escaped (the ones inside the json array object), otherwise, bash will "consume" a layer of them and then, the json object is "sent" to the RPC command wrongly constructed! Since command mentioned by @Rath_ use single quote as boundary of the array, you don't need to add backslash before double quote inside the array.
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7958
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2022, 07:30:12 PM |
|
Is there anyone who understands what's wrong with my node? While I can create channels with other nodes I can't create a channel from Electrum as it can't establish a connection: https://1ml.com/testnet/node/039a7e0982d3b0f967dfc18b8b69c9e8cafd035985eff1832258daf08de119b10eI keep getting this when I enter my node_id@onion_url: And it's weird, because it doesn't return the problem. It just says there is one, which makes me believe the developers aren't aware it exists.
|
|
|
|
darkv0rt3x
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2022, 09:08:41 PM |
|
This should work for you: lightning-cli multifundchannel -k destinations='[{"id": "node1" ,"amount": amount1},{"id": "node2" , "amount": amount2}]' feerate=1000perkb minchannels=2 Make sure to change minchannels if you add more destinations. I never tried this one before, but if even like that, it doesn't work, you may have to escape the double quotes with a backslash. I usually run into problems when I use these commands that requires arrays of json objects. For instance, to create a raw transaction I actually have to use: bitcoin-cli createrawtransaction "[{\"txid\":\"tx_hash_here\", \"vout\":1}]" "[{\"bitcoin_adress_here\":0.05},{\"bitcoin_change_adress_here\":0.049}]" 0 true
As you see, there are some double quotes that needs to be escaped (the ones inside the json array object), otherwise, bash will "consume" a layer of them and then, the json object is "sent" to the RPC command wrongly constructed! Since command mentioned by @Rath_ use single quote as boundary of the array, you don't need to add backslash before double quote inside the array. Indeed. One more thing I just learn! I couldn't connect to your node using only the pub key! Can you provide your node URI? What I can see in my debug file is: 302030 2022-01-17T21:10:20.272Z DEBUG connectd: Now try LN connect out for host ln1qwd8uzvz6wc0je7lcx9ck6wfar906q6eshhlrqeztrd0pr0prxcsuagtc2y.lseed.darosior.ninja 302031 2022-01-17T21:10:20.273Z DEBUG 039a7e0982d3b0f967dfc18b8b69c9e8cafd035985eff1832258daf08de119b10e-connectd: Connected out, starting crypto 302032 2022-01-17T21:10:20.540Z DEBUG 039a7e0982d3b0f967dfc18b8b69c9e8cafd035985eff1832258daf08de119b10e-connectd: Failed connected out: Error connecting to ln1qwd8uzvz6wc0je7lcx9ck6wfar906q6eshhlrqeztrd0pr0prxcsuagtc2y.lseed.bitcoinsta ts.com: Tor server reply: host unreachable. ln1qwd8uzvz6wc0je7lcx9ck6wfar906q6eshhlrqeztrd0pr0prxcsuagtc2y.lseed.bitcoinstats.com:9735: Connection establishment: Connection refused. ln1qwd8uzvz6wc0je7lcx9ck6wfar906q6eshhlrqeztrd0pr 0prxcsuagtc2y.lseed.darosior.ninja:9735: Cryptographic handshake: peer closed connection (wrong key?).
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
n0nce
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2022, 11:48:27 PM |
|
Is there anyone who understands what's wrong with my node? [~]
Do you already have a channel from your C-Lightning node to your Electrum node? Because a reason for the C-Lightning node to reject a channel opening could be that it is configured not to allow more than a single channel between two peers. Other than that, it's possible as mentioned by darkv0rt3x that sometimes the gossip network doesn't propagate the IP of nodes completely so in addition to the node ID you need to specify the IP as well. However, if this was the issue, I'd expect an error message more akin to 'Could not find node' or something of this sort, and not a connection reject. Side question: why are you trying to use Electrum for Lightning all the time? Why not whip up a second C-Lightning or lnd node?
|
|
|
|
darkv0rt3x
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2022, 11:50:24 PM |
|
Is there anyone who understands what's wrong with my node? [~]
Do you already have a channel from your C-Lightning node to your Electrum node? Because a reason for the C-Lightning node to reject a channel opening could be that it is configured not to allow more than a single channel between two peers. Other than that, it's possible as mentioned by darkv0rt3x that sometimes the gossip network doesn't propagate the IP of nodes completely so in addition to the node ID you need to specify the IP as well. However, if this was the issue, I'd expect an error message more akin to 'Could not find node' or something of this sort, and not a connection reject. Side question: why are you trying to use Electrum for Lightning all the time? Why not whip up a second C-Lightning or lnd node? Another reason I asked for the node URI is because that pub key that my node returns in the logs seems to me pretty odd. It looks like the code of an invoice. ln1............. I never seen one like that!
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
Rath_ (OP)
aka BitCryptex
Legendary
Offline
Activity: 1876
Merit: 3132
|
We have been having quite a heated argument in the [self-moderated] Is LN Bitcoin? franky1: About scaling, on-chain and off-chain thread with franky1, who has been banned from this section, about some technical aspects of the Lightning Network. We have been mostly arguing about the way payments are routed through the network. Feel free to join our discussion as both of us might be wrong. Here's a quote from my recent message: Here's my current understanding of how the system works: 0) Lightning nodes constantly use the gossip protocol (bolt07) to forward/receive "node_announcement", "channel_announcement", "channel_update" messages and maintain a local view of the whole network. 1) Alice receives a payment invoice from Eric which includes information like: Eric node's public key, payment hash, amount, expiry (date) and cltv expiry. 2) Alice constructs a path to Eric using her local map of the network. She tries to find the cheapest and the shortest route. The longer the route, the higher the risk that funds will get stuck during routing. 2a) She prepares "onion_routing_packet" which includes encrypted routing information for each hop. 3) Alice sends "update_add_htlc" message to Bob, which includes the "onion_routing_packet" (which is the same for all peers), the amount, the payment hash and cltv expiry. 4) Alice and Bob sign a new commitment transaction with an HTLC output. 5) Bob sends "update_add_htlc" to Carol with the same "onion_routing_packet". 6) Carol and Diana, Diana and Eric do the same. 7) Eric sends "update_fullfil_htlc" message to Diana, which includes the payment secret. 8) Eric and Diana remove the HTLC output and update balances by signing a new commitment transaction. 9) Diana sends "update_fullfil_htlc" to Carol with the same payment secret and they update the commitment transaction. 10) Carol and Bob, Bob and Alice do the same. Comments: 3) The amount Alice sends is actually bigger than the one in the invoice as she must account for the fees. Each hop forwards the HTLC with a smaller amount and keeps the difference. If some hop tries to claim higher fees than Alice expected, the next node in the route will fail the payment as the routing instructions say how much one's node is supposed to forward. If Bob doesn't have enough coins to forward the payment on his side of the channel with Carol, he must send "update_fail_htlc" message and Alice needs to try sending the payment through another route. All channels use the same payment hash. It is safe because HTLC outputs require both the payment secret and HTLC signatures, which can be produced only by channel partners, to be spent. See this post for explanation.
|
|
|
|
Wind_FURY
Legendary
Offline
Activity: 3024
Merit: 1881
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 19, 2022, 02:55:23 PM |
|
I have had enough of my share of debates against franky1 about the Lighting Network, or anything, that many other people in the forum got annoyed because the topics ended with the both of us debating. He has been gaslighting/spreading disinformation everywhere. He always denies the fact that all Bitcoins in Lightning are actual Bitcoins, calling them IOUs. I give him an explanation why they’re not IOUs, he replies with a VERY LONG “technical” post of confusion to troll you.
|
| .SHUFFLE.COM.. | ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ | ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ | . ...Next Generation Crypto Casino... |
|
|
|
darkv0rt3x
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 20, 2022, 09:09:59 PM |
|
I have had enough of my share of debates against franky1 about the Lighting Network, or anything, that many other people in the forum got annoyed because the topics ended with the both of us debating. He has been gaslighting/spreading disinformation everywhere. He always denies the fact that all Bitcoins in Lightning are actual Bitcoins, calling them IOUs. I give him an explanation why they’re not IOUs, he replies with a VERY LONG “technical” post of confusion to troll you.
Absolutely, and even after @Rath_ backing up many of his replies with actual examples and even code, he kept trying to kind of "unsay" (not sure if this word even exists) what @Rath_ was saying. So, I said quite early that that discussion was turning useless. Saying that the milisatoshis are not Bitcoin, is in my perspective, almost the same that saying that cents of dollar are not dollar or cents of Euros are not Euro. Anyway, the discussing is over for me!
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
JayJuanGee
Legendary
Online
Activity: 3822
Merit: 10750
Self-Custody is a right. Say no to"Non-custodial"
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 20, 2022, 10:06:57 PM Merited by darkv0rt3x (1) |
|
I have had enough of my share of debates against franky1 about the Lighting Network, or anything, that many other people in the forum got annoyed because the topics ended with the both of us debating. He has been gaslighting/spreading disinformation everywhere. He always denies the fact that all Bitcoins in Lightning are actual Bitcoins, calling them IOUs. I give him an explanation why they’re not IOUs, he replies with a VERY LONG “technical” post of confusion to troll you.
Absolutely, and even after @Rath_ backing up many of his replies with actual examples and even code, he kept trying to kind of "unsay" (not sure if this word even exists) what @Rath_ was saying. So, I said quite early that that discussion was turning useless. Saying that the milisatoshis are not Bitcoin, is in my perspective, almost the same that saying that cents of dollar are not dollar or cents of Euros are not Euro. Anyway, the discussing is over for me! I agree with you that the argument about milisatoshis not being bitcoin is dumb as fuck, but it is like he is saying that if the cent is divided into 100 or 1,000 then it is not really a cent because the smallest unit that you can transact in the physical world is the cent, so dividing the cent into 100 or 1,000 is not the same thing as the cent itself because the cent does not allow being divided further.. .which again is a stupid argument.....and even a waste of time to get into discussions regarding such nonsensical claims.. and of course, that is not the ONLY nonsensical claim that franky1 makes.. some of the claims get confusing, but they largely add up to the same thing.. nonsense, misleading, irrelevant etc.. Actually, darkv0rt3x, I was going to make some similar comments as you in terms of why LoyceV was giving a platform to someone like franky1 who has shown himself to be disingenuine and misleading and banned from certain parts of the forum for good reason.. and in that regard, what good is it going to do to give a platform to someone who has already shown himself over and over and over to not be posting with any intentions beyond confusing and misleading the issues... but you ended up making some of the criticisms before me.. and I have not quite made it through the whole thread, yet... so maybe I will say something further on the topic, not sure if I have anything to add beyond what you had already said, and likely even LoyceV is seeing some futility in having had given a platform to franky1.... sure maybe it is not completely futile.. I mean I did read several of the responses of some of the posters, and even Rath_ did get excited enough about the thread in order to share a link to it here... so Rath_ likely does not mind providing some of that information again in the context of responding to the largely disingenuine points of franky1.
|
1) Self-Custody is a right. There is no such thing as "non-custodial" or "un-hosted." 2) ESG, KYC & AML are attack-vectors on Bitcoin to be avoided or minimized. 3) How much alt (shit)coin diversification is necessary? if you are into Bitcoin, then 0%......if you cannot control your gambling, then perhaps limit your alt(shit)coin exposure to less than 10% of your bitcoin size...Put BTC here: bc1q49wt0ddnj07wzzp6z7affw9ven7fztyhevqu9k
|
|
|
|