dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 16, 2014, 06:08:04 PM |
|
I'm now getting the same issue as the above user. Anyone notice that the hardware is x.x.x.x and no cgminer?
Any fixes?
The fix for most has been to reimage the SD card, and if that doesn't fix it, to replace the SD card.
|
|
|
|
d2dtk
|
|
September 16, 2014, 07:53:09 PM |
|
I'm now getting the same issue as the above user. Anyone notice that the hardware is x.x.x.x and no cgminer?
Any fixes?
The fix for most has been to reimage the SD card, and if that doesn't fix it, to replace the SD card. I used an entirely different SD Card and used the image from the post. Still didn't fix the issue
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 16, 2014, 08:15:25 PM |
|
I'm now getting the same issue as the above user. Anyone notice that the hardware is x.x.x.x and no cgminer?
Any fixes?
The fix for most has been to reimage the SD card, and if that doesn't fix it, to replace the SD card. I used an entirely different SD Card and used the image from the post. Still didn't fix the issue Hmm... Its been a while since I looked at the firmware versions. I think there might have been a custom one someone compiled that had some fixes in it - this might have been one of them.
|
|
|
|
d2dtk
|
|
September 16, 2014, 08:32:38 PM |
|
I'm now getting the same issue as the above user. Anyone notice that the hardware is x.x.x.x and no cgminer?
Any fixes?
The fix for most has been to reimage the SD card, and if that doesn't fix it, to replace the SD card. I used an entirely different SD Card and used the image from the post. Still didn't fix the issue Hmm... Its been a while since I looked at the firmware versions. I think there might have been a custom one someone compiled that had some fixes in it - this might have been one of them. What's weird is it was working fine until I unplugged it to move it to another room I'm kind of at a lost.
|
|
|
|
d2dtk
|
|
September 16, 2014, 10:58:03 PM |
|
I've tried two different image files from what I've found on the forum but none of them worked.
Anyone willing to take out their sd card and make a image of it then upload for others?
Thank in advance!
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 17, 2014, 08:47:12 PM |
|
I've tried two different image files from what I've found on the forum but none of them worked.
Anyone willing to take out their sd card and make a image of it then upload for others?
Thank in advance!
The images are good, so you may be doing something wrong. What are you doing? Should be downloading and burning with an image writer.
|
|
|
|
d2dtk
|
|
September 17, 2014, 09:26:05 PM |
|
I've tried two different image files from what I've found on the forum but none of them worked.
Anyone willing to take out their sd card and make a image of it then upload for others?
Thank in advance!
The images are good, so you may be doing something wrong. What are you doing? Should be downloading and burning with an image writer. Downloading. Uncompressing. Burning to micro with image file software. Antminer will boot software and connect to network but doesn't hash.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 17, 2014, 09:52:58 PM |
|
I've tried two different image files from what I've found on the forum but none of them worked.
Anyone willing to take out their sd card and make a image of it then upload for others?
Thank in advance!
The images are good, so you may be doing something wrong. What are you doing? Should be downloading and burning with an image writer. Downloading. Uncompressing. Burning to micro with image file software. Antminer will boot software and connect to network but doesn't hash. Do you get modules, can you get the network diagnostics to pass?
|
|
|
|
|
d2dtk
|
|
September 17, 2014, 10:08:08 PM |
|
I've tried two different image files from what I've found on the forum but none of them worked.
Anyone willing to take out their sd card and make a image of it then upload for others?
Thank in advance!
The images are good, so you may be doing something wrong. What are you doing? Should be downloading and burning with an image writer. Downloading. Uncompressing. Burning to micro with image file software. Antminer will boot software and connect to network but doesn't hash. Do you get modules, can you get the network diagnostics to pass? I'm not sure what modules are actually. Here is the data from my monitor tab.EDIT: Everyone, I'm truly sorry I didn't notice that the Miner was plugged in to a different router (someone else did it I swear) and the gateway was 192.168.1.254. Thank you all for your help and I feel super dumb
|
|
|
|
d2dtk
|
|
September 18, 2014, 10:39:23 PM |
|
Dogie,
Have you done any overclocking or volt modifications to an s2 yet? I was thinking of looking into an s1 board and comparing it to that of the s2 to see what can be modified to push our systems to the max. Any thoughts?
|
|
|
|
|
FromSmyrna
|
|
October 07, 2014, 02:14:46 PM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 07, 2014, 09:06:29 PM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
I'm sorry I don't know, ckolivas might though.
|
|
|
|
FromSmyrna
|
|
October 07, 2014, 11:05:17 PM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
I'm sorry I don't know, ckolivas might though. I have antminer s2.I run this antminer at a datacenter.Although i have changed my web and shh datas,somebody is changing my pool datas.What can i do ??
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 08, 2014, 12:09:09 AM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
I'm sorry I don't know, ckolivas might though. I have antminer s2.I run this antminer at a datacenter.Although i have changed my web and shh datas,somebody is changing my pool datas.What can i do ?? What do you mean by pools data? Do you mean someone is changing the miner details in the miner configuration page?
|
|
|
|
d2dtk
|
|
October 08, 2014, 12:45:59 AM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
I'm sorry I don't know, ckolivas might though. I have antminer s2.I run this antminer at a datacenter.Although i have changed my web and shh datas,somebody is changing my pool datas.What can i do ?? Get a better firewall if people are getting in to your machines.
|
|
|
|
FromSmyrna
|
|
October 08, 2014, 09:37:21 AM |
|
I'm also getting ssh attacks. pool are changing information How do I change the ssh port
I'm sorry I don't know, ckolivas might though. I have antminer s2.I run this antminer at a datacenter.Although i have changed my web and shh datas,somebody is changing my pool datas.What can i do ?? What do you mean by pools data? Do you mean someone is changing the miner details in the miner configuration page? yes, miner Status changing
|
|
|
|
PatMan
|
|
October 08, 2014, 12:09:24 PM |
|
yes, miner Status changing I'm not sure, but this could be a stratum redirect attack - it's due to Bitmain using an older security vulnerable cgminer version. Bitmain promised to update cgminer over 7 weeks ago, but have yet to do so. You should email this screen to them asking for an explanation
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 08, 2014, 03:16:10 PM |
|
I'm not sure, but this could be a stratum redirect attack - it's due to Bitmain using an older security vulnerable cgminer version. Bitmain promised to update cgminer over 7 weeks ago, but have yet to do so. You should email this screen to them asking for an explanation That's still being worked on, actively, being worked on.
|
|
|
|
|