[ANN] Technobit 60 Ghs HEX16B(Bitfury v.2 based) 16 chip board design - 119 EUR

[DKdance]

Hi,

PLEASE I NEED HELP. I can't set up my new bitfury v2 on windows 7, HEXMINER says new proxy available please update. And clean_jobs FALSE What am I supposed to do ?

New proxy is available on slush pool webpage to download http://mining.bitcoin.cz/media/download/mining_proxy.exe

But recently our friend 2GOOD compile cgminer for windows with technobit support, you may want to try it: https://bitcointalk.org/index.php?topic=569689.0

If you want to try TPLINK TL-MR3020, read this https://bitcointalk.org/index.php?topic=476326.0

That seems so helpful, thank you I'll take a look.

[loshia]

Hi,

PLEASE I NEED HELP. I can't set up my new bitfury v2 on windows 7, HEXMINER says new proxy available please update. And clean_jobs FALSE What am I supposed to do ?

New proxy is available on slush pool webpage to download http://mining.bitcoin.cz/media/download/mining_proxy.exe

But recently our friend 2GOOD compile cgminer for windows with technobit support, you may want to try it: https://bitcointalk.org/index.php?topic=569689.0

If you want to try TPLINK TL-MR3020, read this https://bitcointalk.org/index.php?topic=476326.0

That seems so helpful, thank you I'll take a look.

Dude,
invest your time and efforts in tplink
it will pay of for a month just from electricity costs
and it works beter
and so on...

[hammer]

Hello Guys,

has anyone use the miner with a normaly 12V power supply?
Must i use all 4 connectors from the molex of the miner or can i use only the 2 Pins for 12V?

Please give me a quick answer

[loshia]

Hello Guys,

has anyone use the miner with a normaly 12V power supply?
Must i use all 4 connectors from the molex of the miner or can i use only the 2 Pins for 12V?

Please give me a quick answer

Two are enough

[dogie]

Setup guide and review of these units will be ready around Friday.

[snooz3k]

I ordered 2 of these and I received them today, I got them hooked up to a Raspberry Pi running Minepeon and I compiled in the patch of the cgminer as supplied on the download page.

And then I used these to set it up (Commands are in English, rest in German don't have to know German to understand the guide):
http://sven-goessling.de/14/12/2013/der-40ghs-hex16b-bitfury-asic-bitcoin-miner-auf-dem-raspberry-pi-14-12-13/

And the first post image of this thread listed the voltage setting set to 1000 rather than 900 as listed on the post above so I adjusted that and they run at an average of 62.5GH/s each now. I have no plans to adjust them higher than this.

Running it without any adjustments at all it gave about 40-45GH/s each.
I have a lot of computers around so I cant hear these fans at all, I can hear a slight hissing if I move closer to them however but for me that isn't a problem.

Cheers marto74!

[DKdance]

Dude,
invest your time and efforts in tplink
it will pay of for a month just from electricity costs
and it works beter
and so on...

Is it hard to flash ? Is it only this: https://bitcointalk.org/index.php?topic=476326.0   ?

[hammer]

API running in local read Access mode on port 4028 (9)

Whats wrong? I starting cgminer so:
sudo ./cgminer -c cgminer.conf --hexminerb-options 16:540 --hexminerb-voltage 1000 --set_default_to_b

[loshia]

API running in local read Access mode on port 4028 (9)

Whats wrong? I starting cgminer so:
sudo ./cgminer -c cgminer.conf --hexminerb-options 16:540 --hexminerb-voltage 1000 --set_default_to_b

Remove cgminer.conf
Give your pools as command line option

[Zich]

API running in local read Access mode on port 4028 (9)

Whats wrong? I starting cgminer so:
sudo ./cgminer -c cgminer.conf --hexminerb-options 16:540 --hexminerb-voltage 1000 --set_default_to_b

All good, nothing wrong. One of your cgminer.conf must be like this:

Code:

"api-allow" : "R:127.0.0.1",

If you want to enable write capability just change R to W.

Code:

"api-allow" : "W:127.0.0.1",

or want to add another address

Code:

"api-allow" : "R:127.0.0.1,192.168.0.155",

If you want to use cgminer.conf that located on cgminer folder, then use command

Code:

sudo ./cgminer --config cgminer.conf

[TrytoHex]

Did these miners just got more expensieve since the A3 are online?

[Zich]

Did these miners just got more expensieve since the A3 are online?

No. 169EUR because it will ship in 48 hour after payment.

[TrytoHex]

Did these miners just got more expensieve since the A3 are online?

No. 169EUR because it will ship in 48 hour after payment.

But the 149 option is gone. I guess because it was cheaper to buy 2 16B and have more GH/s then with the new A3 board...

[Zich]

Did these miners just got more expensieve since the A3 are online?

No. 169EUR because it will ship in 48 hour after payment.

But the 149 option is gone. I guess because it was cheaper to buy 2 16B and have more GH/s then with the new A3 board...

Yup, 149EUR no longer available.

I am not sure the cause, you can ask marto 

[wtfjusthappened]

Sup.

My hex16b v2 arrived on the 10th from the 8th dispatch batch and since then I have been running it for 15 hours a day every day and it has been working perfectly. The only reason it isn't on 24/7 is its getting power from my noisy gaming rig, and I cant sleep with it on.

Currently have it on a TPLink with the 0.3.1 firmware. As I have just mentioned in 2GOOD's review, to get the 60GH/s out of the board on the TPLink the core voltage needs to be upped to 1000mV from the TPLink's default 900mV.

It has been working well whenever it has been turned on, it arrived speedily and was well packaged, and it was reasonably priced.
I am impressed.

Thanks for putting out this board marto.

[MadiMan]

HI!!, i ordered one of this board, and i can´t track the shipment.

Marto74 can you send me any information about that??
Order number UTZXQXYYD

Thanks!!

Theoretically this is the status

2014-04-22 08:50:57   Shipped
2014-04-19 14:49:57   Payment accepted

But the tracking numbers appears to be invalid o something

[Zich]

HI!!, i ordered one of this board, and i can´t track the shipment.

Marto74 can you send me any information about that??
Order number UTZXQXYYD

Thanks!!

Theoretically this is the status

2014-04-22 08:50:57   Shipped
2014-04-19 14:49:57   Payment accepted

But the tracking numbers appears to be invalid o something

Try here:
http://www.speedy.bg/begin.php?page=web_Tracking&lang=en

[MadiMan]

Hi marto74
I´m having issues with the Hex16B, I tried in raspberry, after less than one minute, the miner fails, and another created (hexb0, hexb1, hexb2  and moooooore) then, I try in win7 x64 with hexminer, allways the programs fall in to error and windows show a dialog to close the program, if I let stay here, it continues to mine, but at regular intervals, the Hex16B recicles itself (same as raspberry).
The buy a MR3020, flashed with your firmware, and.... the same, at regular intervals, one new hex created because the precedent appears as ZOMBIE, I´m running it in a new PSU (Tuniq Potency 550W) checked the voltages, and never dropped of 12V, tried in 900mV, 1000mV, and all the ways, the same result, tried directly to he USB port, and attached to a powered HUB.
I´m doing wrong? or anything in the miner is faulty?? thanks for the reply
I received it this last week

[marto74]

Hi marto74
I´m having issues with the Hex16B, I tried in raspberry, after less than one minute, the miner fails, and another created (hexb0, hexb1, hexb2  and moooooore) then, I try in win7 x64 with hexminer, allways the programs fall in to error and windows show a dialog to close the program, if I let stay here, it continues to mine, but at regular intervals, the Hex16B recicles itself (same as raspberry).
The buy a MR3020, flashed with your firmware, and.... the same, at regular intervals, one new hex created because the precedent appears as ZOMBIE, I´m running it in a new PSU (Tuniq Potency 550W) checked the voltages, and never dropped of 12V, tried in 900mV, 1000mV, and all the ways, the same result, tried directly to he USB port, and attached to a powered HUB.
I´m doing wrong? or anything in the miner is faulty?? thanks for the reply
I received it this last week

Just send it back for RMA

[MadiMan]

Ok, I Find the problem!!!
One chip dead, in the chip count I type 15 because in the cgminer api log all the times the stats says that the chip 16 has 0 nonces and 0 dupes
Mmmm I´m writing here because I can´t PM you!! thanks!