[ANN][GLN] - Galleon ★ Keccak SHA-3 ★ Kimoto Gravity Well - Launched

[virtualdn]

http://coinok.pw is ready for launch!

[1714520945]

1714520945

[rubberpool]

0% fee Galleon Pool Make sure to REGISTER before launch and configure your miners!

gln.pool.mn offers:
» 0% fee
» Powerful dedicated server
» Friendly support via email or support forums
» Skilled admin
» DDOS protection
Join us!

[Galleon]

1 hour

[Winky]

Never got the Galleon Mount, maybe i´ll find it in a block 

[womcs]

Hi,

Will someone give me an example of the command I should run to start mining this on a windows box with the latest version of cudaminer using an nvidia GPU?

Thanks very much!

[cryptohunter]

looks like a fair launch BUT

2 billion minting  2000 000 000 ?

block reward only 2000?  


premine  1.5% with block reward that size is HUGE

Also

do you mean 1.5% of the premine for bounty?  or another 1.5% of the total?

[eyal1]

DO you give bounty for linux compiled wallet with instructions how to install on ubuntu?

[hardcoreminers.com]

Well be putting up a pool at hardcoreminers right now!

[gonzzo]

Hi,

Will someone give me an example of the command I should run to start mining this on a windows box with the latest version of cudaminer using an nvidia GPU?

Thanks very much!

i think the following command should work

cudaminer.exe -i 1,0,0 -a keccak -o server -u blabla -p blabla

(note -i 1,0,0 is only needed if you want to work with the box while mining)

[maccd123]

password?

[womcs]

Hi,

Will someone give me an example of the command I should run to start mining this on a windows box with the latest version of cudaminer using an nvidia GPU?

Thanks very much!

i think the following command should work

cudaminer.exe -i 1,0,0 -a keccak -o server -u blabla -p blabla

(note -i 1,0,0 is only needed if you want to work with the box while mining)

Thanks!  Is the server 5600 or 5601? (as recommended in OP)

Also, does anyone have a test pool (testnet or otherwise any keccak (max) implementation that I can test my setup on?)



Thanks all!

[bramvnl]

i'm in 30 min left 

[gonzzo]

Hi,

Will someone give me an example of the command I should run to start mining this on a windows box with the latest version of cudaminer using an nvidia GPU?

Thanks very much!

i think the following command should work

cudaminer.exe -i 1,0,0 -a keccak -o server -u blabla -p blabla

(note -i 1,0,0 is only needed if you want to work with the box while mining)

Thanks!  Is the server 5600 or 5601? (as recommended in OP)

Also, does anyone have a test pool (testnet or otherwise any keccak (max) implementation that I can test my setup on?)



Thanks all!

you can test your settings with 365coin, possible pool: http://365.blessedpool.com
not sure about the port for solo mining ...

[miningpoolhub]

26 minutes!!!

[vindyne8]

I'm definitely missing something @ Keccak.

Been testing out the CGMiner 3.7.3 (version which says its specifically made for Keccak)

When I run the .bat with --keccak it says invalid conf file, partially loading. And spams me with Accepted Diff 0/16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

When I run the .bat without the --keccak it says invalid url/credentials. And spams me with Accepted Diff 0.16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

My .bat is:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak 127.0.0.1:7087 -u user -p password --lookup-gap 2 --gpu-dyninterval 7 --intensity 19 -w 256 --thread-concurrency 8192 -g 1 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1200 --gpu-memdiff 0 --gpu-vddc 1.2 --temp-target 75 --temp-overheat 82 --temp-cutoff 88 --auto-fan --gpu-fan 30-85 --queue 0 --scan-time 0 --expiry 1

My .conf is :

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=22555
addnode=80.112.144.84
addnode=82.139.127.205

Sorry to bother, but, been stuck on this for a couple days basically. Am I missing anything in the bat or conf? Thanks for any assistance.

[tylerderden]

I'm definitely missing something @ Keccak.

Been testing out the CGMiner 3.7.3 (version which says its specifically made for Keccak)

When I run the .bat with --keccak it says invalid conf file, partially loading. And spams me with Accepted Diff 0/16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

When I run the .bat without the --keccak it says invalid url/credentials. And spams me with Accepted Diff 0.16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

My .bat is:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak 127.0.0.1:7087 -u user -p password --lookup-gap 2 --gpu-dyninterval 7 --intensity 19 -w 256 --thread-concurrency 8192 -g 1 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1200 --gpu-memdiff 0 --gpu-vddc 1.2 --temp-target 75 --temp-overheat 82 --temp-cutoff 88 --auto-fan --gpu-fan 30-85 --queue 0 --scan-time 0 --expiry 1

My .conf is :

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=22555
addnode=80.112.144.84
addnode=82.139.127.205

Sorry to bother, but, been stuck on this for a couple days basically. Am I missing anything in the bat or conf? Thanks for any assistance.

with keccak i do better by going minimum and letting it figure out the best settings like try just this:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak 127.0.0.1:7087 -u user -p password

use a bat file and make sure you have no extra spaces or whatever. go try it on a 365 pool for a few you'll figure it out.

[tylerderden]

and replace the ip with your pools info and port

[tylerderden]

what card are you using?

[gonzzo]

I'm definitely missing something @ Keccak.

Been testing out the CGMiner 3.7.3 (version which says its specifically made for Keccak)

When I run the .bat with --keccak it says invalid conf file, partially loading. And spams me with Accepted Diff 0/16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

When I run the .bat without the --keccak it says invalid url/credentials. And spams me with Accepted Diff 0.16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

My .bat is:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak -o 127.0.0.1:7087 -u user -p password --lookup-gap 2 --gpu-dyninterval 7 --intensity 19 -w 256 --thread-concurrency 8192 -g 1 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1200 --gpu-memdiff 0 --gpu-vddc 1.2 --temp-target 75 --temp-overheat 82 --temp-cutoff 88 --auto-fan --gpu-fan 30-85 --queue 0 --scan-time 0 --expiry 1

My .conf is :

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=22555
addnode=80.112.144.84
addnode=82.139.127.205

Sorry to bother, but, been stuck on this for a couple days basically. Am I missing anything in the bat or conf? Thanks for any assistance.

with keccak i do better by going minimum and letting it figure out the best settings like try just this:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak 127.0.0.1:7087 -u user -p password

use a bat file and make sure you have no extra spaces or whatever. go try it on a 365 pool for a few you'll figure it out.

you miss the -o option for server cred!!!
edit -o is on wrong place:
"cgminer.exe --keccak -o 127.0.0.1:7087" not "cgminer.exe -o --keccak 127.0.0.1:7087"

[bobby1776]

I'm definitely missing something @ Keccak.

Been testing out the CGMiner 3.7.3 (version which says its specifically made for Keccak)

When I run the .bat with --keccak it says invalid conf file, partially loading. And spams me with Accepted Diff 0/16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

When I run the .bat without the --keccak it says invalid url/credentials. And spams me with Accepted Diff 0.16 and stale shares when solo mining. It does list everything in the panel as running, other than that.

My .bat is:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer.exe -o --keccak 127.0.0.1:7087 -u user -p password --lookup-gap 2 --gpu-dyninterval 7 --intensity 19 -w 256 --thread-concurrency 8192 -g 1 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1200 --gpu-memdiff 0 --gpu-vddc 1.2 --temp-target 75 --temp-overheat 82 --temp-cutoff 88 --auto-fan --gpu-fan 30-85 --queue 0 --scan-time 0 --expiry 1

My .conf is :

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=22555
addnode=80.112.144.84
addnode=82.139.127.205

Sorry to bother, but, been stuck on this for a couple days basically. Am I missing anything in the bat or conf? Thanks for any assistance.

I'm not sure if you just need 3.7.3, or 3.7.3_keccak (at least that's what my linux cgminer says..  If you are unsure of your miner you can grab the one listed here as it will work with this too:  http://max.1gh.com/