Bitcoin Forum
June 15, 2024, 11:22:19 AM *
News: Voting for pizza day contest
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 »  All
  Print  
Author Topic: Asic.to Firmware 17Series • Optimized efficiency/Performance •  (Read 8428 times)
taserz (OP)
Sr. Member
****
Offline Offline

Activity: 800
Merit: 293


Created AutoTune to saved the planet! ~USA


View Profile
April 29, 2020, 06:32:36 PM
Last edit: April 30, 2020, 12:30:48 AM by frodocooper
 #201

[...]

Thanks for checking that too. My pro also run much lower! Appreciated.

Autotune Firmware for S19 and S19j! Overclock, Underclock, AutoTuning. Asic.to The MOON Increased hashrate, improved power efficiency 30w/TH up to 85th/s!!Mining bitcoin since 2011 • Best nerd decision of my life
jacktman
Newbie
*
Offline Offline

Activity: 6
Merit: 9


View Profile
April 29, 2020, 11:12:51 PM
 #202

Bitmain doesn't publish the recovery files anymore and they want you to email them and request the exact recovery files you need, but you can get it here https://asic.to/download/s17-and-t17-sd-card-image-to-downgrade/ although that file contains more firmware than you need, it has S17+, T17+, S17, and T17, simply keep what you need and delete the rest.

Thanks for your response, I have tried to download the file but the download stops without completing, I have tried from different browsers and with different ISP.
will you have the file on another server?
thanks
fyoung55
Member
**
Offline Offline

Activity: 277
Merit: 70


View Profile
April 29, 2020, 11:40:19 PM
 #203

Thanks Phil,  what watt meter do you use?  I may look into getting one of those!

I have two identical meters like the one I posted.  I'll swap and see what it turns up, also do you suppose the leg I have the transformer on matters?  it shouldn't since this only pulls 220v unlike say a stove which also pulls 110v for the various electronics, in theory that would have a slightly higher leg amperage wise right?
mikeywith
Legendary
*
Offline Offline

Activity: 2268
Merit: 6420


be constructive or S.T.F.U


View Profile
April 30, 2020, 01:36:47 AM
 #204


True, I tried downloading it again and it gets stuck in the middle of the way, I will PM taserz and ask him to check the file, meanwhile you can get it from this link https://drive.google.com/file/d/1WeDRY_Xffeqot3Hlpx0rb2ZmCkMqP8h4/view?usp=sharing.

█▀▀▀











█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
█████████████
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
███████████▀██▀
████▀█████████
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█











▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
▀██▀▀
philipma1957
Legendary
*
Offline Offline

Activity: 4158
Merit: 8036


'The right to privacy matters'


View Profile WWW
April 30, 2020, 02:00:34 AM
Last edit: May 01, 2020, 12:23:39 AM by frodocooper
 #205

Thanks Phil,  what watt meter do you use?  I may look into getting one of those!

I have two identical meters like the one I posted.  I'll swap and see what it turns up, also do you suppose the leg I have the transformer on matters?  it shouldn't since this only pulls 220v unlike say a stove which also pulls 110v for the various electronics, in theory that would have a slightly higher leg amperage wise right?

this meter
https://www.amazon.com/gp/product/B00GMZRXE8
wired into this cable
https://www.ebay.com/itm/L6-30P-to-C19-Molded-Power-Cord-10ft-220V-250V-30A-Ships-Free/202904653534?

it measures by the hour not instant time

I like to take a 5 to 10 hour measurement

say  0 hour             100.00
      10 hours later   122.25

you did 22.25 kwatts / 10 = 2.225 kwatts an hour or 2225 watts  more accurate then a cheap meter.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
fyoung55
Member
**
Offline Offline

Activity: 277
Merit: 70


View Profile
April 30, 2020, 01:34:47 PM
Last edit: May 01, 2020, 12:24:10 AM by frodocooper
 #206

Thanks again!  I swapped the meters, but unfortunately hooked the transformer up to line voltage and vice versa.... POP.  UHOH, bad smells...that meter is not happy now  Undecided.

Hooked up original and everything is ok with miner, but it still reads high.

I went ahead and ordered one like yours and I will hook it up when it comes and report the results.  I like the idea of wiring it right into the cord.  I have an extra cord and will wire that one up while the miner runs then do a quick swap.  Don't suppose you'd be willing to snap a pic of yours?
philipma1957
Legendary
*
Offline Offline

Activity: 4158
Merit: 8036


'The right to privacy matters'


View Profile WWW
April 30, 2020, 02:36:47 PM
Last edit: May 01, 2020, 12:24:39 AM by frodocooper
 #207

here is the meter

https://i.imgur.com/SUmBDs5.jpg

it is spliced into this

https://i.imgur.com/QaA68LG.jpg

here is the cable that would run an s17 with no meter spliced in

https://i.imgur.com/MUoHeYQ.jpg

10 hour measurements are really accurate.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
vr4dude316
Newbie
*
Offline Offline

Activity: 35
Merit: 0


View Profile
May 03, 2020, 04:27:37 PM
Last edit: May 04, 2020, 12:21:39 AM by frodocooper
 #208

Why is my T17P hashing so HIGH???  This on BM firmware... Shocked

https://drive.google.com/file/d/1UnA73CBGES5LYF1mgnbk8Uwa8VOGfPv5/view?usp=sharing
https://drive.google.com/file/d/1ymHtqw17g2I8LAv5QP1gmsoS0kyvff5f/view?usp=sharing
coxye
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
May 08, 2020, 12:10:36 PM
 #209

philipma1957 has your hash rate returned to normal?
fyoung55
Member
**
Offline Offline

Activity: 277
Merit: 70


View Profile
May 08, 2020, 12:56:38 PM
Last edit: May 09, 2020, 02:09:08 AM by frodocooper
Merited by frodocooper (4)
 #210

[...]

Meter installed yesterday, here is what I got:

62TH/s autotune:
asic firmware = 2360
old wattmeter = 2550
NEW INLINE METER = 49.4 KWH/20 hours = 2.47 or 2470W

Looks like firmware wattage reporting is still off by over 100w on this setting, but my old meter was indeed "hot" as suspected.  I'm going to drop it down to 58TH and measure again and see how close that one is.

taserz - The asic reading on your miner was 2532W - why is mine so much lower?

freq are 650, 650, and 646.67.  Autotune voltage is 18.0.  Did yours tune to a higher voltage?  170W seems like a lot.
philipma1957
Legendary
*
Offline Offline

Activity: 4158
Merit: 8036


'The right to privacy matters'


View Profile WWW
May 08, 2020, 01:16:34 PM
Last edit: May 09, 2020, 02:09:37 AM by frodocooper
 #211

Four fans at 2 amps each and 12 volts = 8 x 12 or 96 watts

controller is about 10 watts so 96 + 10 = 106. which is just about equal to your  110 watt difference.

my guess is the asic firmware at 2360 watts is hash boards only.

@coxye. my bad t17+ is still bad 2 of three boards are good.

@vr4dude316

it is most likely a software glitch.  you should always check pool rates on the miner gui and on the pool.

it would be nice if the pool gets those high readings like the miner gui shows.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
fyoung55
Member
**
Offline Offline

Activity: 277
Merit: 70


View Profile
May 08, 2020, 02:12:17 PM
Merited by philipma1957 (1)
 #212

I can check that by running a low hash rate where the fans turn at 10% or so and then jacking the fans up to 100% and see what the watt meter reports.  I'll try that later today too!
taserz (OP)
Sr. Member
****
Offline Offline

Activity: 800
Merit: 293


Created AutoTune to saved the planet! ~USA


View Profile
May 08, 2020, 05:19:47 PM
 #213

I can check that by running a low hash rate where the fans turn at 10% or so and then jacking the fans up to 100% and see what the watt meter reports.  I'll try that later today too!

Is this a pro unit?

Autotune Firmware for S19 and S19j! Overclock, Underclock, AutoTuning. Asic.to The MOON Increased hashrate, improved power efficiency 30w/TH up to 85th/s!!Mining bitcoin since 2011 • Best nerd decision of my life
fyoung55
Member
**
Offline Offline

Activity: 277
Merit: 70


View Profile
May 08, 2020, 07:23:13 PM
Last edit: May 09, 2020, 02:10:15 AM by frodocooper
 #214

Is this a pro unit?

yes s17 pro 50T.
rocky2020
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
May 11, 2020, 03:59:42 AM
Last edit: May 12, 2020, 02:38:40 AM by frodocooper
 #215

little question : i have a t17 with a hashboard with 3 defectives ASIC, 27 still ok but the original firmware turn off completly the hashboar. is you firmware can use the 27 asics and disable the 3 defectives one to continue working anyway?
mikeywith
Legendary
*
Offline Offline

Activity: 2268
Merit: 6420


be constructive or S.T.F.U


View Profile
May 11, 2020, 09:02:23 AM
Last edit: May 12, 2020, 02:39:16 AM by frodocooper
 #216

I think disabling the hashboard due to a bad chip is not something the firmware does for no reason if you could technically mine with 1 chip why wouldn't they just allow you to do so?



Above is an image of T17 hashboard and how do "electrons travel", those Asics are connected to one another, every miner design is different, I remember S9s had some different domains of chips where some boards could run with few chips, I don't think the T17 will let you do that.

█▀▀▀











█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
█████████████
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
███████████▀██▀
████▀█████████
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█











▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
▀██▀▀
taserz (OP)
Sr. Member
****
Offline Offline

Activity: 800
Merit: 293


Created AutoTune to saved the planet! ~USA


View Profile
May 17, 2020, 07:46:16 AM
 #217

Yeah I wish we could make it work with a dead chip but it takes out 4 with it.

Autotune Firmware for S19 and S19j! Overclock, Underclock, AutoTuning. Asic.to The MOON Increased hashrate, improved power efficiency 30w/TH up to 85th/s!!Mining bitcoin since 2011 • Best nerd decision of my life
taserz (OP)
Sr. Member
****
Offline Offline

Activity: 800
Merit: 293


Created AutoTune to saved the planet! ~USA


View Profile
May 18, 2020, 02:39:37 PM
 #218

Hi,

I run an Antminer T17 with Asic.to firmware.
I go on setup 45T and i got an average hashrate of 43T, that's not so bad but on my nicehash account it give me only 36T.

Do you know the reason of it?

Thanks

Let it run for 24 hours to get your average.

Autotune Firmware for S19 and S19j! Overclock, Underclock, AutoTuning. Asic.to The MOON Increased hashrate, improved power efficiency 30w/TH up to 85th/s!!Mining bitcoin since 2011 • Best nerd decision of my life
kano
Legendary
*
Offline Offline

Activity: 4522
Merit: 1844


Linux since 1997 RedHat 4


View Profile
May 20, 2020, 12:49:06 PM
 #219

Reminder to those helping violate the cgminer license.

No one can distribute a firmware that includes any cgminer binary - called cgminer or bmminer or anything else - without providing the source code on request.

This is a requirement of the cgminer code.
The code is free to use, you can read it, compile it, run it, distribute it, as long as you don't violate the license.
Many people put YEARS more effort into developing it than these scumbags violating the license.

It is not some random request, it is specified clearly in every file of source code for cgminer.

The OP seems to think he can ignore this requirement.
He also makes the bazaar claim that he has some dodgy lawyer who thinks he can ignore the license also.
That's bullshit. He is wrong.

Using his firmware is simply supporting breaking the license and makes you just as bad as him.

Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
May 20, 2020, 02:08:48 PM
Merited by frodocooper (3)
 #220

Reminder to those helping violate the cgminer license.

No one can distribute a firmware that includes any cgminer binary - called cgminer or bmminer or anything else - without providing the source code on request.

This is a requirement of the cgminer code.
The code is free to use, you can read it, compile it, run it, distribute it, as long as you don't violate the license.
Many people put YEARS more effort into developing it than these scumbags violating the license.

It is not some random request, it is specified clearly in every file of source code for cgminer.

The OP seems to think he can ignore this requirement.
He also makes the bazaar claim that he has some dodgy lawyer who thinks he can ignore the license also.
That's bullshit. He is wrong.

Using his firmware is simply supporting breaking the license and makes you just as bad as him.

Not really condoning violation of licenses, but while you are on strike spree, would you mind contacting Bitmain so they can provide theirs?
Pages: « 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!