Bicknellski
|
|
June 08, 2014, 12:28:37 PM |
|
"Things a BFL engineer will never say for 100$ Alex."
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
guytechie
|
|
June 09, 2014, 05:05:05 AM |
|
You can remove the cap while on 120V as its just software based. I have no idea what it looks like though.
Please let us know if you find out how. I ssh'd into the box and looked at the files but couldn't find anything. If it's not in a text config file then it's over my head. Oh it would be on the usual web interface, if its not there then its probably been hidden. The problem is the firmware is being developed at a rapid pace so things change and move faster than I can track them. I can add option, but 1) It is not FCC compliant to pull that much. 2) I didn't do enough tests on 110V to make sure it will not harm the PSU/cables/socket. In general 110V is something I prefer not to mess with because of the heat it can create in power cables. Please do testing and give us the hash rate for those who are on 110v on future products. Not everyone is on a 240v standard. BTW, when will a home edition of the SP30 come out? I read somewhere it will be a single PSU/half the hash rate of the full SP30. Thanks.
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
Zelek Uther
|
|
June 09, 2014, 05:53:13 AM |
|
Could someone post a video/audio of SP10 running so that we could hear the noise level please.
thank you
I specifically haven't because its 1) impossible to capture 2) impossible to comprehend with a video. Use a decibelometer to comapre other sounds you know I agree with dogie on this. However, I have taken a video of my SP10 along with an S2, an S1, and a Jupiter. The only sound you hear is the SP10 basically. Here are the videos (aka "how to silence your SP10"): UCoustic rack cabinet part 1UCoustic rack cabinet part 2
|
Run a Bitcoin node, support the network.
|
|
|
CryptKeeper
Legendary
Offline
Activity: 2044
Merit: 1055
|
|
June 09, 2014, 06:32:05 AM |
|
BTW, when will a home edition of the SP30 come out? I read somewhere it will be a single PSU/half the hash rate of the full SP30.
Thanks.
There was a group buy of an SP-15, but AFAIK it was cancelled because nobody was interested.
|
Follow me on twitter! I'm a private Bitcoin and altcoin hodler. Giving away crypto for free on my Twitter feed!
|
|
|
guytechie
|
|
June 09, 2014, 12:08:11 PM |
|
Does anyone know if the hashrate of the SP30 is less than the advertised hashrate on 110v like the SP10? If so, by how much?
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
June 09, 2014, 05:21:01 PM |
|
I get 1.33 th/s on 110v. I use the medium settings. The miner runs great on 110v, very stable and cool. Does anyone know if the hashrate of the SP30 is less than the advertised hashrate on 110v like the SP10? If so, by how much?
|
|
|
|
zvisha
|
|
June 09, 2014, 06:45:39 PM |
|
Does anyone know if the hashrate of the SP30 is less than the advertised hashrate on 110v like the SP10? If so, by how much?
It will be less, but its hard to know by how himuch. I would guess between 7% and 20%, hopefully closer to 7% like sp10
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
June 09, 2014, 07:30:35 PM |
|
Does anyone know if the hashrate of the SP30 is less than the advertised hashrate on 110v like the SP10? If so, by how much?
It will be less, but its hard to know by how himuch. I would guess between 7% and 20%, hopefully closer to 7% like sp10 What is specifically being metered due to the regulations on 110V? I'm assuming its a current, but a current where?
|
|
|
|
zvisha
|
|
June 09, 2014, 09:14:32 PM |
|
Does anyone know if the hashrate of the SP30 is less than the advertised hashrate on 110v like the SP10? If so, by how much?
It will be less, but its hard to know by how himuch. I would guess between 7% and 20%, hopefully closer to 7% like sp10 What is specifically being metered due to the regulations on 110V? I'm assuming its a current, but a current where? The FCC requires 1200W (I think) limitation at the wall for 110V. There is no such limitation for 220V, and manufacturer's limits (unlike FCC) not needed for compliance. The PSU has it's thermal and OC shutdown. In SP10 we pull 1350W in 220V and ~1200W in 110V. I know that in 110V SP10 can pull more because I tested it, but all our FW versions have to be FCC compliant. But then it is open source, so users can compile miner_gate_arm with whatever they want as long as they understand it will void their warranty. We plan to stay open-source for SP30 too.
|
|
|
|
JWU42
Legendary
Offline
Activity: 1666
Merit: 1000
|
|
June 10, 2014, 01:27:10 AM |
|
Zvisha,
There are plenty of devices that draw > 1200W at the wall on 110V. Teapots and heaters to name a few. I suspect the difference is that these items aren't running 24/7/365.
1320W at the wall should be fine for any 110V home with a standard (15A * 110V * 15A * .8 (safety margin) = 1320W
More and more newer homes are actually coming with 20A circuits...
|
|
|
|
zvisha
|
|
June 10, 2014, 01:41:48 AM |
|
Zvisha,
There are plenty of devices that draw > 1200W at the wall on 110V. Teapots and heaters to name a few. I suspect the difference is that these items aren't running 24/7/365.
1320W at the wall should be fine for any 110V home with a standard (15A * 110V * 15A * .8 (safety margin) = 1320W
More and more newer homes are actually coming with 20A circuits...
I was also wondering about that. I will talk to our HW guys.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
June 10, 2014, 02:52:12 AM |
|
Zvisha,
There are plenty of devices that draw > 1200W at the wall on 110V. Teapots and heaters to name a few. I suspect the difference is that these items aren't running 24/7/365.
1320W at the wall should be fine for any 110V home with a standard (15A * 110V * 15A * .8 (safety margin) = 1320W
More and more newer homes are actually coming with 20A circuits...
not many though. IMO the SP10 and SP30 units are built more with datacenter than spare bedroom in mind. They are loud and create a lot of heat, in fact the 1200W draw can be more than what the majority of PC power cables are rated for (10A). If you are able to operate these at home, it may be worth the work required to either install a new 240V circuit for your equipment or to even simply swap an existing 120V circuit's (with only one dedicated outlet) breaker and outlet for a 240V one. Wiring can remain the same in most cases. 208/240V is more efficient and puts a lot less strain on the power supply - the sondoolies machine is a long-term investment/installation.
|
|
|
|
JWU42
Legendary
Offline
Activity: 1666
Merit: 1000
|
|
June 10, 2014, 10:51:40 AM |
|
208/240V is more efficient and puts a lot less strain on the power supply - the sondoolies machine is a long-term investment/installation.
Any source for that? I have always seen efficiency gains as very small as well. No ASIC is a long-term investment by most traditional investing standards. I have an SP30 order and believe it will be almost worthless by Xmas.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
June 10, 2014, 12:17:30 PM |
|
IMO the SP10 and SP30 units are built more with datacenter than spare bedroom in mind
Designed use is not the same as what consumers choose to use products for. 208/240V is more efficient and puts a lot less strain on the power supply - the sondoolies machine is a long-term investment/installation.
Any source for that? I have always seen efficiency gains as very small as well. Waste heat generated components = I 2R
|
|
|
|
zvisha
|
|
June 11, 2014, 10:59:49 AM |
|
Zvisha,
There are plenty of devices that draw > 1200W at the wall on 110V. Teapots and heaters to name a few. I suspect the difference is that these items aren't running 24/7/365.
1320W at the wall should be fine for any 110V home with a standard (15A * 110V * 15A * .8 (safety margin) = 1320W
More and more newer homes are actually coming with 20A circuits...
I was also wondering about that. I will talk to our HW guys. Ok, I added an option to override the limitation (after long discussion) in next FW, 1.4.2. Make sure you use cables matching your amperage (I think it can go up to 14A if you have around 110V). Just create a file called /etc/mg_ignore_110_fcc in the miner and it will ignore the limitation. BTW, the PSU supports up to 14.5 Amper.
|
|
|
|
ShadesOfMarble
Donator
Hero Member
Offline
Activity: 543
Merit: 500
|
|
June 11, 2014, 11:24:35 AM |
|
how loud is LOUD?
are we talking the volume of an S2? 4-6 S1 units? or is this vaccuum-cleaner loud?
I brought the SP10 to the DC and it is the loudest unit there. (I'm running turbo fans.)
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
June 11, 2014, 11:51:41 AM |
|
These power supplies are beasts. They seem to be able to do so much. I am still surprised at how well they work on 110v. The auto sensing of what your line is able to send is great. Zvisha,
There are plenty of devices that draw > 1200W at the wall on 110V. Teapots and heaters to name a few. I suspect the difference is that these items aren't running 24/7/365.
1320W at the wall should be fine for any 110V home with a standard (15A * 110V * 15A * .8 (safety margin) = 1320W
More and more newer homes are actually coming with 20A circuits...
I was also wondering about that. I will talk to our HW guys. Ok, I added an option to override the limitation (after long discussion) in next FW, 1.4.2. Make sure you use cables matching your amperage (I think it can go up to 14A if you have around 110V). Just create a file called /etc/mg_ignore_110_fcc in the miner and it will ignore the limitation. BTW, the PSU supports up to 14.5 Amper.
|
|
|
|
guytechie
|
|
June 12, 2014, 03:13:53 PM |
|
I have to ask... maybe someone in the US may know... what does a plug for a 220v in the USA look like? And where can I buy the associated computer cable?
Since we're in the US, 220v is still probably at 60 Hz. Will the PSU be able to deal with 220v at 60 Hz, since normally 220v is for countries at 50 Hz?
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
wpgdeez
|
|
June 12, 2014, 04:11:02 PM |
|
I have to ask... maybe someone in the US may know... what does a plug for a 220v in the USA look like? And where can I buy the associated computer cable?
Since we're in the US, 220v is still probably at 60 Hz. Will the PSU be able to deal with 220v at 60 Hz, since normally 220v is for countries at 50 Hz?
It is fine. Depending on the wiring you will either be at 208v or 240v. My 240 line is reported as 245-250 in the SP10 interface. For 240v you use a breaker that bridges 2 120v lines for 240v. Nema LP6 is the plug that most PDU's use, that is the type of outlet you will want installed.
|
|
|
|
guytechie
|
|
June 12, 2014, 05:36:51 PM |
|
I have to ask... maybe someone in the US may know... what does a plug for a 220v in the USA look like? And where can I buy the associated computer cable?
Since we're in the US, 220v is still probably at 60 Hz. Will the PSU be able to deal with 220v at 60 Hz, since normally 220v is for countries at 50 Hz?
It is fine. Depending on the wiring you will either be at 208v or 240v. My 240 line is reported as 245-250 in the SP10 interface. For 240v you use a breaker that bridges 2 120v lines for 240v. Nema LP6 is the plug that most PDU's use, that is the type of outlet you will want installed. Thanks for the info. I couldn't find NEMA LP6 on Google. Do you mean NEMA L6-20 or L6-30? Also, where do I find power cables that has the NEMA L6 end and a standard PC end that goes into the PSU?
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
|