rograz
|
|
July 01, 2014, 07:46:25 PM |
|
Also do i have to do this to both boards? or will doing it for one board apply it to the whole thing?
both blades, 8 resistors in total
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
July 02, 2014, 01:34:32 AM Last edit: July 02, 2014, 02:10:36 AM by mstrongbow |
|
I guess i should just wait for the youtube tutorial.
Importing now and uploading to YouTube shortly. edit: Uploading now. I will post a link in a new reply. The video is rough (undedited)
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
July 02, 2014, 02:32:52 AM Last edit: July 02, 2014, 02:50:58 AM by mstrongbow |
|
How to Undervolt (Pencil Mod) Your Antminer S1 video... http://youtu.be/Cj9hgoUnpTcIt's still processing as I just uploaded it. Hope this helps!
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8683
'The right to privacy matters'
|
|
July 02, 2014, 02:45:55 AM |
|
How to Undervolt (Pencil Mod) Your Antminer S1 video... http://youtu.be/Cj9hgoUnpTcIt's still processing as I just uploaded it. Hope this helps! Still processing as I type. Try in 20 min or so.
|
|
|
|
armin22
|
|
July 02, 2014, 12:28:51 PM |
|
I love you stongbow, thanks.
|
|
|
|
armin22
|
|
July 02, 2014, 01:30:48 PM |
|
edit /etc/config/asic-freq option 'freq_value' '0A81' #275M option 'chip_freq' '275' option 'timeout' '45'
Guys how do i find the /3tc/config/asic-freq folder?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8683
'The right to privacy matters'
|
|
July 02, 2014, 01:46:11 PM |
|
|
|
|
|
armin22
|
|
July 02, 2014, 02:07:54 PM |
|
Thank you, Final noob question, How do i set up WIFI and how strong is the WIFI antenna?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8683
'The right to privacy matters'
|
|
July 02, 2014, 02:17:55 PM |
|
|
|
|
|
armin22
|
|
July 02, 2014, 02:19:32 PM |
|
What's that, i dont get it, I dont have WiFi N.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
July 02, 2014, 04:36:46 PM Last edit: July 02, 2014, 06:05:37 PM by mstrongbow |
|
once you are @root (ssh into your S1) copy/paste each line and hit enter after each line... cd /etc/config vim asic-freq use the "I" key to enter edit mode. Add/remove the # signs as needed (no # sign indicates ACTIVE freq) Use "ESC" key to exit edit mode type ":wq" and enter then "reboot" and enter Hope that helps edit /etc/config/asic-freq option 'freq_value' '0A81' #275M option 'chip_freq' '275' option 'timeout' '45'
Guys how do i find the /3tc/config/asic-freq folder?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8683
'The right to privacy matters'
|
|
July 02, 2014, 05:17:22 PM |
|
|
|
|
|
armin22
|
|
July 02, 2014, 05:18:16 PM |
|
I have a good WI-FI antenna that came with my Computer's wifi card, it came with 2 so could i just use one of them on the antminer?
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 02, 2014, 05:19:46 PM |
|
Guys I dont have a fancy multimeter, would it be possible to just pencil mod the resistors without a multimeter with a #2 pencil? maybe just a few strokes on each to see what I get? then lower freq to 300 or so?
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 02, 2014, 05:20:09 PM |
|
I have a good WI-FI antenna that came with my Computer's wifi card, it came with 2 so could i just use one of them on the antminer?
if it fits has has the right connector
|
|
|
|
armin22
|
|
July 02, 2014, 05:20:33 PM |
|
Guys I dont have a fancy multimeter, would it be possible to just pencil mod the resistors without a multimeter with a #2 pencil? maybe just a few strokes on each to see what I get? then lower freq to 300 or so?
I wont risk it, multimeters are very cheap, i just ordered one for 0.027BTC VIA Snapcard (The product is on amazon)
|
|
|
|
armin22
|
|
July 02, 2014, 05:22:04 PM |
|
I have a good WI-FI antenna that came with my Computer's wifi card, it came with 2 so could i just use one of them on the antminer?
if it fits has has the right connector What connector/fit does the antminer have?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8683
'The right to privacy matters'
|
|
July 02, 2014, 05:22:11 PM |
|
I have a good WI-FI antenna that came with my Computer's wifi card, it came with 2 so could i just use one of them on the antminer?
If I recall no as the connector on the antminer does not fit typical antennas you need an adapter. There are some that got wifi to work so it is possible. you could start a thread with a title. ' I need help to set up wi fi for my antminer s-1 ' Ask for advice from some one that got it to work. Most people needed some kind of adapter or trick to do it.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
July 02, 2014, 05:23:42 PM |
|
Guys I dont have a fancy multimeter, would it be possible to just pencil mod the resistors without a multimeter with a #2 pencil? maybe just a few strokes on each to see what I get? then lower freq to 300 or so?
I wont risk it, multimeters are very cheap, i just ordered one for 0.027BTC VIA Snapcard (The product is on amazon) yeah ok... just got one on amazon for 7 bucks
|
|
|
|
armin22
|
|
July 02, 2014, 05:25:17 PM |
|
Guys I dont have a fancy multimeter, would it be possible to just pencil mod the resistors without a multimeter with a #2 pencil? maybe just a few strokes on each to see what I get? then lower freq to 300 or so?
I wont risk it, multimeters are very cheap, i just ordered one for 0.027BTC VIA Snapcard (The product is on amazon) yeah ok... just got one on amazon for 7 bucks Lol i overpaid then xD
|
|
|
|
|