rdluffy
Legendary
Offline
Activity: 2226
Merit: 1304
|
|
December 22, 2020, 08:46:58 PM |
|
Yes I have a Killawatt, have had it for years. Was excited to see that I "already have a piece of mining gear" LOL. I will be using them on the rigs I build for sure.
so I'm still not sure if it's a big deal to go with a 3 fan model over a 2 fan. I think i asked this question, but I don't see that I got a solid response. In my mind, I'm thinking 3 fans = more electricity consumption, but better cooling, longer life of the board. Or is all of that mitigated by backing off the gas pedal so to speak like you guys are saying - not running the GPUs at full speed...?
Hey, better to create a new thread for you and you can ask anything you want, because it's becoming off-topic of this thread about 3060tis, ok? About 3 or 2 fans, you can watch some reviews on youtube and foruns, or ask here about the model you want, but usually 3 fans will be better than 2, and the power consumption of 1 more fan is extremely low, nothing to worry about There are brands that have better colling performance in general
|
| | . .Duelbits│SPORTS. | | | ▄▄▄███████▄▄▄ ▄▄█████████████████▄▄ ▄███████████████████████▄ ███████████████████████████ █████████████████████████████ ███████████████████████████████ ███████████████████████████████ ███████████████████████████████ █████████████████████████████ ███████████████████████████ ▀████████████████████████ ▀▀███████████████████ ██████████████████████████████ | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | ███▄██▄███▄█▄▄▄▄██▄▄▄██ ███▄██▀▄█▄▀███▄██████▄█ █▀███▀██▀████▀████▀▀▀██ ██▀ ▀██████████████████ ███▄███████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ▀█████████████████████▀ ▀▀███████████████▀▀ ▀▀▀▀█▀▀▀▀ | | OFFICIAL EUROPEAN BETTING PARTNER OF ASTON VILLA FC | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | 10% CASHBACK 100% MULTICHARGER | │ | | │ |
|
|
|
|
|
|
Transactions must be included in a block to be properly completed. When you send a transaction, it is broadcast to miners. Miners can then optionally include it in their next blocks. Miners will be more inclined to include your transaction if it has a higher transaction fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
DigitalFarns
Member
Offline
Activity: 115
Merit: 16
|
|
December 22, 2020, 09:01:54 PM |
|
Sure, I can make a new thread if needed. My questions are specifically about the 3060Ti, as that is the board I am focusing all my studying on right now. But if talking about building a rig with these cards is off topic, I'm find to make a new one. I just wanted to clarify that when I'm asking these questions, they are specific to the board in question.
|
Mining since 1-19-21 :-)
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
December 22, 2020, 09:19:03 PM |
|
Sure, I can make a new thread if needed. My questions are specifically about the 3060Ti, as that is the board I am focusing all my studying on right now. But if talking about building a rig with these cards is off topic, I'm find to make a new one. I just wanted to clarify that when I'm asking these questions, they are specific to the board in question.
3 fans will always have a larger heatsink because it uses more space, so reason 3 fans are better = larger heatsink, however need to check the heatsink weight, example, the first design of sapphire rx 580 had a somewhat average heatsink, while it was good, summer time had reports it sucked, third design came with a heavy heatsink, even in the sahara desert that thing worked without a problem hehe, 2 fans, it did not need a third fan. Yeah a third fan uses more electricity, 6 watts average, 12v 0.5 amperes.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
December 22, 2020, 09:49:05 PM Last edit: December 22, 2020, 10:03:25 PM by philipma1957 |
|
also, what I'm seeing here is that the mobo itself only draws about 20 watts, is that correct? I was wondering how much the motherboards would add to the equation, seems to be that it's very small in comparison.
the cpu if it is a t variant is lowest power of the cpus. intel g3900t https://ark.intel.com/content/www/us/en/ark/products/90738/intel-celeron-processor-g3900t-2m-cache-2-60-ghz.htmltdp is 35watts intel g3900 https://www.intel.com/content/www/us/en/products/processors/celeron/g3900.htmlhas a tdp of 51 watts intel g4400t tdp of 35 watts https://ark.intel.com/content/www/us/en/ark/products/90614/intel-pentium-processor-g4400t-3m-cache-2-90-ghz.htmlintel 4900t tdp of 35 watts https://ark.intel.com/content/www/us/en/ark/products/129952/intel-celeron-g4900t-processor-2m-cache-2-90-ghz.htmlso using a t version saves watts ,drawback is if you want to run a huge rig say 8 3060ti's you may need a better cpu. Also bronze, silver, gold platinum, titanium psu., at a 500 watt build drawing a constant 500 watts. bronze 625 at the kwatt titanium 525 at the kwatt also mobo efficiency also the card itself and I am back to topic I have a 3 fan aorus 3060ti smos says I do 60.84 mh at 119 watts the 3060ti aorus 94.29 mh at 219 watts the 3080 evga that adds to 318 watts for gpu it estimates my total consumption is 378 watts I have an FSP 1200 watt platinum I have a intel g4400t I use a stick of samung ram with this board https://www.amazon.com/ONDA-B250BTC-D8P-Mining-Motherboard-LGA1151/dp/B0791Z44YXnow I run on the kwatt meter at 397-401 watts. i also know this meter has always been 5% hot. I have other kwatt meters that real less. for fun I will run this 2 card rig with just the 3080 and see how much we drop. So on the reboot. I read 219 for the gpu via smos I read 259 for the rig via smos I read 269 for the rig via kwatt so I dropped 378 to 259 = 119 watts via smos reading I dropped 398 to 269 = 129 watts via kwatt reading since the meter on the house counts I would use 129 watts for 60.84 for my card. hoping that the hot meter is maybe 5 or 6 watts higher then my house meter. so the house meter is charging me maybe 123 to 130 watts for the card. it is hard to know how accurate the house meter really is compared to the kwatt meter. For me to do it correctly I need to have my wife out of the house for at least 4 days and only run 1 circuit in the whole house to test properly. Which is not going to happen.
|
|
|
|
TGJ
Jr. Member
Offline
Activity: 173
Merit: 5
|
|
December 23, 2020, 01:48:48 AM |
|
Anyone have an EVGA 3060 Ti XC Gaming card? I have an opportunity to purchase a few of these at close to MSRP. I’m curious what kind of experience people have had mining ETH (or other coins) with this card.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
December 23, 2020, 02:53:15 AM |
|
Anyone have an EVGA 3060 Ti XC Gaming card? I have an opportunity to purchase a few of these at close to MSRP. I’m curious what kind of experience people have had mining ETH (or other coins) with this card.
Buy them. If you do not want them I will take at least one of them maybe 2 of them. I would pay a small markup and shipping . All assuming you are usa based.
|
|
|
|
TGJ
Jr. Member
Offline
Activity: 173
Merit: 5
|
|
December 23, 2020, 03:05:34 AM |
|
Anyone have an EVGA 3060 Ti XC Gaming card? I have an opportunity to purchase a few of these at close to MSRP. I’m curious what kind of experience people have had mining ETH (or other coins) with this card.
Buy them. If you do not want them I will take at least one of them maybe 2 of them. I would pay a small markup and shipping . All assuming you are usa based. I will scoop them up. I would like to help you out Phil but I am in Canada.
|
|
|
|
hellscreamer
Jr. Member
Offline
Activity: 47
Merit: 2
|
|
December 23, 2020, 01:59:39 PM |
|
I'm getting my EVGA 3 fans in BC , Canada too . Can fill up 2 rigs 3 Fans run 8c cooler , but I'm not sure about the EVGA 2 fans . Hey Phil , let me know if you want my PM you about 50 x 3070 deal in ON , Canada
|
|
|
|
percy_tc
|
|
December 23, 2020, 06:34:00 PM |
|
Gigabyte Eagle do 61Mh. mem +1000, tdp 62, gpu +200
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
December 23, 2020, 08:54:39 PM Last edit: December 23, 2020, 09:23:48 PM by minefarmbuy |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
edit: 119W draw
|
|
|
|
hellscreamer
Jr. Member
Offline
Activity: 47
Merit: 2
|
|
December 23, 2020, 09:14:11 PM |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
May I ask what software is it ? newly updated NBminer ?
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
December 23, 2020, 09:17:33 PM |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
May I ask what software is it ? newly updated NBminer ? currently t-rex 19.4 cuda 11
|
|
|
|
Philipma1957cellphone
|
|
December 24, 2020, 01:31:13 PM |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
May I ask what software is it ? newly updated NBminer ? currently t-rex 19.4 cuda 11 Those are good numbers
|
This is philipma1957 alt. Do not conduct business with this account
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
December 24, 2020, 01:48:48 PM |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
May I ask what software is it ? newly updated NBminer ? currently t-rex 19.4 cuda 11 Those are good numbers their really good expect people to be snagging these for ETH for the foreseeable future dammit, supposed to be on holidays, we just cant keep off these forums eh? haha
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
badbart
Member
Offline
Activity: 449
Merit: 24
|
|
December 24, 2020, 04:37:57 PM |
|
Nvidia founders edition: 60% Power Limit, -300 Core, +1270 Mem, 61.4 mh/s
457.51 driver.
May I ask what software is it ? newly updated NBminer ? currently t-rex 19.4 cuda 11 Are you getting any rejected shares? I was using T-Rex and it seemed to report a higher hash rate then phoenix but poolside phoenix was about 10% better.
|
|
|
|
cryptodash4
Newbie
Offline
Activity: 122
Merit: 0
|
|
December 25, 2020, 11:30:14 AM |
|
I M ALSO SEARCHING NEWS ABOUT IT ,PLEASE MENTION IF ANYONE HAV SOME NEWS ?
|
|
|
|
trexminer
Member
Offline
Activity: 283
Merit: 63
|
|
December 26, 2020, 06:15:35 AM |
|
Are you getting any rejected shares? I was using T-Rex and it seemed to report a higher hash rate then phoenix but poolside phoenix was about 10% better.
10% difference, sounds like you haven't given it enough time for a fair comparison
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
December 28, 2020, 11:06:22 PM |
|
So eth has past 730. getting cards is going to be really hard to do.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
December 28, 2020, 11:11:04 PM |
|
So eth has past 730. getting cards is going to be really hard to do.
Target for the next 3 days till 1st January is $850 ~ $1000. It has a great probability to get there.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
buraz11
Jr. Member
Offline
Activity: 115
Merit: 4
|
|
December 29, 2020, 12:00:05 AM Last edit: December 29, 2020, 12:11:26 AM by buraz11 Merited by philipma1957 (1) |
|
Finally got the rig to work, it wasnt the drivers or anything, seems my hx1200 is dying, 2x 3060ti and a 5700xt modded hashing happily, nvidia really did an amazing job with their new card lineup (i tried to make the pic to show on the forum but it seems im a bit too dumb... so only a link)
|
|
|
|
|