MoreEpochs mod v2.7 [Claymore ETH miner 15] Win/AMD+Nvidia. 0.6% fee, 600 epochs

[Sweminer777]

Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?

Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

[1714760102]

1714760102

[1714760102]

1714760102

[1714760102]

1714760102

[1714760102]

1714760102

[1714760102]

1714760102

[1714760102]

1714760102

[sxemini]

Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?

Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.

[Sweminer777]

Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?

Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.

because ETC can be mined whit old cards and claymore isnt updated for that.

[saeedrss]

hi
in Iran dev fee doesn't work properly

all miner work good except this miner

DevFee: ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)
ETH: 02/03/21-14:28:52 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.800 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.815 Mh/s, GPU2 38.772 Mh/s, GPU3 30.420 Mh/s
ETH: 02/03/21-14:28:56 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.858 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.836 Mh/s, GPU2 38.828 Mh/s, GPU3 30.401 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:29:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.870 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.783 Mh/s, GPU1 38.834 Mh/s, GPU2 38.818 Mh/s, GPU3 30.435 Mh/s
ETH: 02/03/21-14:29:07 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.793 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.794 Mh/s, GPU2 38.772 Mh/s, GPU3 30.434 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

hi, probably ssl port 5555 is closed by your internet provider. If you are mining to ethermine, original miner would try to use ssl connection to mine
devfee there too. I can change this in next versions of the mod if you won't be able to solve the problem with port 5555 on your side.

did you solve issue with closed 5555 port? I'll release new version soon with workaround.

hello
the government belock most ssl site in iran   we are f***ed

[Just_a_miner]

hi
in Iran dev fee doesn't work properly

all miner work good except this miner

DevFee: ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)
ETH: 02/03/21-14:28:52 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.800 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.815 Mh/s, GPU2 38.772 Mh/s, GPU3 30.420 Mh/s
ETH: 02/03/21-14:28:56 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.858 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.836 Mh/s, GPU2 38.828 Mh/s, GPU3 30.401 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:28:59 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.748 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.806 Mh/s, GPU1 38.773 Mh/s, GPU2 38.751 Mh/s, GPU3 30.419 Mh/s
ETH: 02/03/21-14:29:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.870 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.783 Mh/s, GPU1 38.834 Mh/s, GPU2 38.818 Mh/s, GPU3 30.435 Mh/s
ETH: 02/03/21-14:29:07 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.793 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.793 Mh/s, GPU1 38.794 Mh/s, GPU2 38.772 Mh/s, GPU3 30.434 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: 02/03/21-14:29:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 137.643 Mh/s, Total Shares: 158, Rejected: 0, Time: 01:20
ETH: GPU0 29.784 Mh/s, GPU1 38.764 Mh/s, GPU2 38.726 Mh/s, GPU3 30.370 Mh/s
ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

hi, probably ssl port 5555 is closed by your internet provider. If you are mining to ethermine, original miner would try to use ssl connection to mine
devfee there too. I can change this in next versions of the mod if you won't be able to solve the problem with port 5555 on your side.

did you solve issue with closed 5555 port? I'll release new version soon with workaround.

hello
the government belock most ssl site in iran   we are f***ed

I see, download v1.7 - problem solved.

[Just_a_miner]

Not working whit older cards like claymore made it work.

3.5 compute is not compatible anymore no point using it if it dont support old cards.

thanks anyways for your try.

Thanks, what older cards do you mean?

Claymore supported 4xx series 6xx 7xxx, like 460 gtx 560 gtx 760 gtx, Radeon 5xxxx 6xxx 7xxxx for mining altcoins and other coins that dont need a big dag file.

it was only miner that supported this old cards.

Why you don´t use claymore for your oldcards? This new version is not needed if you want to mine with your oldcards.

because ETC can be mined whit old cards and claymore isnt updated for that.

Yes, ETC now uses other algo called Etchash. I will see what can be done about that eventually.

[Just_a_miner]

New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.

I'll get Polaris Gpu soon, so I will be able to test straps with newer drivers.

[angelbbs]

Warning!
This fake software uses a modified library to run it. libcurl.dll, which starts miner (located in MoreEpochs.dll painted and similar to claymore EthDcrMiner64.exe)
It's fake, don't use it

[batsonxl]

New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.

I'll get Polaris Gpu soon, so I will be able to test straps with newer drivers.

ok thanks. waiting forward

[Just_a_miner]

Warning!
This fake software uses a modified library to run it. libcurl.dll, which starts miner (located in MoreEpochs.dll painted and similar to claymore EthDcrMiner64.exe)
It's fake, don't use it

You have good imagination, I give you that. "Painted and similar"  Of course you don't need it, because your goal is to spread FUD, but I still explain how my mod works.

To let Claymore ETH miner work with epochs 385+ I have to patch it, adding required functionality. I can't patch EthDcrMiner64.exe directly because it protected with Vmprotect, it doesn't let to modify .exe file. So I have to patch EthDcrMiner64.exe in memory when it starts. To do so I use my MoreEpochs.dll. To load MoreEpochs.dll I added import of it to libcurl.dll.

I see that several accounts spam FUD in my topic lately. It shows me that my mod gains popularity and that I'm doing right thing.

[Just_a_miner]

New Version just released!

More Epochs mod v1.7 for Claymore Eth Miner v15

Changelog:

~ now miner shows AMD GPUs power draw stats on newer AMD drivers (tested with 20.12.1)

Sounds great, doest it work with straps too? Could you please test with -strap command. will be really nice to use it again.

I'll get Polaris Gpu soon, so I will be able to test straps with newer drivers.

ok thanks. waiting forward

Can you tell what AMD driver version did you use when you were trying to use -straps?

[Just_a_miner]

New Version just released!

More Epochs mod v1.8 for Claymore Eth Miner v15

Changelog:

~ Fixed issue with incorrect shares on 8 GB Polaris AMD GPUs: RX 470, 480, 570, 580 (tested on AMD video driver 20.12.1).

~ Command line option "-rxboost 1" works fine with Polaris AMD GPUs (tested on AMD video driver 20.12.1). For now avoid using "-strap" command line
   option for AMD GPUs, it will crash rig. This problem will be fixed in next versions of the mod.

[Just_a_miner]

hello, when I try different programs, I can use it without any problems, but I get an "GPU got incorrect share. If you see this warning often, make sure you did not overclock it too much!" error in the claymore mod program. Is there anything I can do?

Comes every 10 to 15 seconds on almost all cards, not on a single card. The same error comes across even though I try to reduce the memory and clock values by 50%.

The version I am using AMD 20.12.1
Card: 8G Sapphire Rx 580 Nitro + and 8G Sapphire Rx 580 Pulse.

for example when i run phoenixminer on the same computer i don't get any errors.

I'll be glad if you can help, thanks.

Hello, download new version 1.8, it fixes issue with incorrect shares for 8GB Polaris GPUs (RX 470, 480, 570, 580,...)

[qwick745]

I loaded 1.8 and it's working much better, no longer invalid shares on my 580's. Except for one vega 56 I have. that one still has mostly invalid shares.

And I know you said it's next on your list, but would be great to get straps working again as well. Thanks.

[Just_a_miner]

New Version just released!

More Epochs mod v1.9 for Claymore Eth Miner v15

Changelog:

~ Fixed issue with incorrect shares on 8+ GB Vega AMD GPUs.

[Just_a_miner]

I loaded 1.8 and it's working much better, no longer invalid shares on my 580's. Except for one vega 56 I have. that one still has mostly invalid shares.

And I know you said it's next on your list, but would be great to get straps working again as well. Thanks.

Thank you for the feedback. Please test new version 1.9 with your Vega. I'm starting to investigate issue with straps right now.

[qwick745]

I loaded 1.8 and it's working much better, no longer invalid shares on my 580's. Except for one vega 56 I have. that one still has mostly invalid shares.

And I know you said it's next on your list, but would be great to get straps working again as well. Thanks.

Thank you for the feedback. Please test new version 1.9 with your Vega. I'm starting to investigate issue with straps right now.

Loaded 1.9, can confirm the vega works now. There was another rig with 580's that had been working with 1.8 but kept stopping or seeming like it was having some issue when it would try to to devfee mining, but that seems like it's working better as well in the last day it's been running 1.9 as well. Thanks for getting these running better.

Look forward to the next versions with straps too!

[Just_a_miner]

I loaded 1.8 and it's working much better, no longer invalid shares on my 580's. Except for one vega 56 I have. that one still has mostly invalid shares.

And I know you said it's next on your list, but would be great to get straps working again as well. Thanks.

Thank you for the feedback. Please test new version 1.9 with your Vega. I'm starting to investigate issue with straps right now.

Loaded 1.9, can confirm the vega works now. There was another rig with 580's that had been working with 1.8 but kept stopping or seeming like it was having some issue when it would try to to devfee mining, but that seems like it's working better as well in the last day it's been running 1.9 as well. Thanks for getting these running better.

Look forward to the next versions with straps too!

Very good, thanks for the information. So all major AMD GPU like Polaris, Vega, Navi works and I can focus on making straps work. As for the rig that had some issues with devfee (or something else?), if you'll have same problems again you can send me miner's .log file to my email justaminer@tutanota.com so I can understand what went wrong.

Can you tell what Windows version do you use on your mining rigs, like Win 10 v1903 or? And what AMD video driver version? I need more information to identify problem with straps. It can be both newer version of video drivers, because AMD did change something and may be some internal changes in newer Windows updates that prevent straps from applying.

[aG3nt]

Hi Guys,

Im having problem with one of my XFX RX 580 cards. For some reason its mining slower then the rest, its starting like the rest with 31,4 mh/s and then after 1 min slows down to 23-24 mh/s and goes like this all the time.

Im running my rig on Win 10 drivers from December 2020. I have this rig for 3 years, it was ok at the begining, then the problem occured (it was times when mining was not so profitable) so i put that one card that slowed down to my personal computer for gaming. When mining was more profitable i again put it back to my rig - it was already on claymore 15 and....the card went like all the others - 31,4 mh/s. It went ok for months to time when claymore stopped working properly and i had to switch to phoenix - that one card immidiatly started miniing 23-24 again....

Now i switched with big hopes to MoreEpochClaymore 1.9 and the problem still exists. 5 cards go 31,4 and one card 23,5

What can cause the problem ( I tried to switch cables, risers...nothing helps. Still that one cards slows down after 1 min to 23,5 temperatures are ok

Please help

EDITED: LOL I FOUND A SOLUTION ON THE INTERNET:d

that one card was a "snowflake", needed to be cooled down a little more then the rest 5 celsius now its going ok thank you for your answers joke ill leave the comment, maybe it will help somebody in need one day

[Just_a_miner]

Hi Guys,

Im having problem with one of my XFX RX 580 cards. For some reason its mining slower then the rest, its starting like the rest with 31,4 mh/s and then after 1 min slows down to 23-24 mh/s and goes like this all the time.

Im running my rig on Win 10 drivers from December 2020. I have this rig for 3 years, it was ok at the begining, then the problem occured (it was times when mining was not so profitable) so i put that one card that slowed down to my personal computer for gaming. When mining was more profitable i again put it back to my rig - it was already on claymore 15 and....the card went like all the others - 31,4 mh/s. It went ok for months to time when claymore stopped working properly and i had to switch to phoenix - that one card immidiatly started miniing 23-24 again....

Now i switched with big hopes to MoreEpochClaymore 1.9 and the problem still exists. 5 cards go 31,4 and one card 23,5

What can cause the problem ( I tried to switch cables, risers...nothing helps. Still that one cards slows down after 1 min to 23,5 temperatures are ok

Please help

EDITED: LOL I FOUND A SOLUTION ON THE INTERNET:d

that one card was a "snowflake", needed to be cooled down a little more then the rest 5 celsius now its going ok thank you for your answers joke ill leave the comment, maybe it will help somebody in need one day

Hi, it's nice you've found solution and shared it, thank you.