AMD Radeon RX 590 Mining Info 💲⛏ (PBE bios mod✅)

[DarthYoda_]

Hi.

I'm running into an issue here. I recently bought an RX 590 (Gigabyte) and it has apparently a new set of Samsung memories (K4G80325FC) which are unrecognized in PBE 1.7.2 for the "one-click mod".

I would vastly appreciate if this could be made to my card, the BIOS mod.

If it is any help, it is a "Revision 2.0" model of the RX590 from Gigabyte.

Any extra information you could need I could provide.

I am only achieving 27.5 MH/s in ETH/ETC Claymore/Phoenix, when I was doing 30.5 MH/s on my old Asrock RX 580 (8 GB)

I am highly interested in making this work for these cards for everybody, so if you guys need any extra information about the card, just ask away.

Many thanks,

Juan. - Buenos Aires, Argentina

[1715122653]

1715122653

[1715122653]

1715122653

[1715122653]

1715122653

[morticio777]

Hi.

I'm running into an issue here. I recently bought an RX 590 (Gigabyte) and it has apparently a new set of Samsung memories (K4G80325FC) which are unrecognized in PBE 1.7.2 for the "one-click mod".

I would vastly appreciate if this could be made to my card, the BIOS mod.

If it is any help, it is a "Revision 2.0" model of the RX590 from Gigabyte.

Any extra information you could need I could provide.

I am only achieving 27.5 MH/s in ETH/ETC Claymore/Phoenix, when I was doing 30.5 MH/s on my old Asrock RX 580 (8 GB)

I am highly interested in making this work for these cards for everybody, so if you guys need any extra information about the card, just ask away.

Many thanks,

Juan. - Buenos Aires, Argentina

I buy the same Gygabyte RX590 gaming Rev2 at black friday and it's just horrible... stock i have these speed... i didn't understand how you can have 27.5 on ETC, i have 10 on Clay and 15 on phoenix... My benchmark https://i.imgur.com/bAxCPPu.jpg

[DarthYoda_]

I buy the same Gygabyte RX590 gaming Rev2 at black friday and it's just horrible... stock i have these speed... i didn't understand how you can have 27.5 on ETC, i have 10 on Clay and 15 on phoenix... My benchmark https://i.imgur.com/bAxCPPu.jpg

Well, wow. That's definitely something bad with your card. At least I was getting only -10% than RX580, which is not extremely bad, as yours.

---

I wish I could get it to at least equal the HR I was getting before.

This card for some reason, though, consumes less power than my RX580, which still makes the whole deal equally profitable than before.
It is very weird, since these were supposed to consume more, not less, as well as perform more (not less).

Very, very strange.

I don't mind pumping it volts as long as I can get a decent HR... since I have free electricity... which is why I bought the 590, even though it was supposed to consume more power.

---

Definitely hoping this issue gets assessed by PBE creator, and also AMD, since it might be a driver issue, since RX590 is the last coin in the jar of Polaris, even if it is a brand new architecture.

It seems weird AMD would create a new architecture only for this RX590 product. I would imagine they would release RX650+ series in 2020 with this same architecture (12nm), and the RX590 is like a prototype, and we'll be getting optimized performance when those cards come out, and they optimize drivers...

But, this could totally be daydreaming on my part. I sure hope not.

We shall see.

[DarthYoda_]

Small update:

With newest WHQL Adrenaline Drivers (19.12.2) I've managed to run VRAMs stable @ 2200 MHz, and I might try even higher.

It would be awesome if somebody could tell me how to manually adjust timings in a safe way, or have PBE update for these set of Samsung VRAMs (K4G80325FC).

Maybe for Christmas? 

[Mattthev]

Small update:

With newest WHQL Adrenaline Drivers (19.12.2) I've managed to run VRAMs stable @ 2200 MHz, and I might try even higher.

It would be awesome if somebody could tell me how to manually adjust timings in a safe way, or have PBE update for these set of Samsung VRAMs (K4G80325FC).

Maybe for Christmas? 

It's no problem to add K4G80325FC in PBE, but you need to test what Uber-mix will fit, I can send you also some of mine test timings which could fit also.
Send me your bios to monerobiosedit@gmail.com pls.

[DarthYoda_]

It's no problem to add K4G80325FC in PBE, but you need to test what Uber-mix will fit, I can send you also some of mine test timings which could fit also.
Send me your bios to monerobiosedit@gmail.com pls.
[/quote]

E-mail sent! Default BIOS attached. I'll await further instructions how to test this.
Juan

[VasilyS]

I buy the same Gygabyte RX590 gaming Rev2 at black friday and it's just horrible... stock i have these speed... i didn't understand how you can have 27.5 on ETC, i have 10 on Clay and 15 on phoenix...

You have to switch on compute mode in drivers. It will give you 25-26 mh/s even without BIOS mod. Then try to use strap 1 and rxboost options in Claymore miner.

[morticio777]

I buy the same Gygabyte RX590 gaming Rev2 at black friday and it's just horrible... stock i have these speed... i didn't understand how you can have 27.5 on ETC, i have 10 on Clay and 15 on phoenix...

You have to switch on compute mode in drivers. It will give you 25-26 mh/s even without BIOS mod. Then try to use strap 1 and rxboost options in Claymore miner.

OMG, you fix my card!!!! All of that just because of an advance option to change.... A huge thanks for your help!!

[dwdhu]

https://github.com/IndeedMiners/PBE-Polaris-Bios-Editor-1.7.2/issues/2#issuecomment-576283188

[DarthYoda_]

Ok, unadvertently I can post something that might be of value...

I'm a noobie to mining so bare with me.

I am back to doing 30.5 MH/s ETH - Dual Claymore - Dagger Hashimoto

All I needed to do was set up "-strap 1" in configuration... so I went up from 27.1 to 30.5 MH/s

One note: I couldn't hold 2185MHz in these memories with that option set, but I'm apparently stable @ 2100MHz...

Needs further testing, I might get away with 2150MHz or so, which would easily give me 31.low MH/s, which is what I expected from this card (RX 590)

I can't imagine what it could do with a proper BIOS mod, unless what I'm doing is already maxing it out other way.

[thepeppi]

its a old thread i know but i am working on a 590 atm
this oneclick is awsome thnx

one question how can i undervolt the cards they seem to have a huge power hunger

[JHORN]

If there is a way to decrease RX590 energy consumption it will be considered by many miners but 140watts for 32mhs is too high, a RX5700xt can do 120watts at 60mhs and some even find a way to go down than 120watts power draw on RX5700xt, it's always about energy

[Mattthev]

Hi.

I'm running into an issue here. I recently bought an RX 590 (Gigabyte) and it has apparently a new set of Samsung memories (K4G80325FC) which are unrecognized in PBE 1.7.2 for the "one-click mod".

I would vastly appreciate if this could be made to my card, the BIOS mod.

If it is any help, it is a "Revision 2.0" model of the RX590 from Gigabyte.

Any extra information you could need I could provide.

I am only achieving 27.5 MH/s in ETH/ETC Claymore/Phoenix, when I was doing 30.5 MH/s on my old Asrock RX 580 (8 GB)

I am highly interested in making this work for these cards for everybody, so if you guys need any extra information about the card, just ask away.

Many thanks,

Juan. - Buenos Aires, Argentina

Hello, i have same problem with memory Samsung : K4G80325FB

08 00 00 67DF Polaris30       M25P40/c         80000 pass 113-4E3661U-X6M

Bios: https://www.techpowerup.com/vgabios/208250/sapphire-rx590-8192-181220

Model: RX 590 Nitro+ Gold Anniversary Edition (5OTh)

I tested with the 1.7.5 / 4 / 2 same problem.

I click, put the patched bios, restart the pc and unknown card

Please add support memory please, tks

K4G80325FB is supported from like 1.4 version of PBE maybe even sooner. It was one of the most used Samsung memory type in RX400 series. All PBE 1.7.x versions from our Github supports that type and applies Ubermix timings. The bios you've linked seems to be working as expected with PBE 1.7.5.

K4G80325FC is one of the latest Samsung memory and it's supported since PBE 1.7.3. Ubermix doesn't fit on this type.

Download the latest version directly from Github or build from source code
https://github.com/IndeedMiners/PolarisBiosEditor/releases

[raminakuka]

i have MSI RX 590 ARMOR OC.. first time i tried  PhoenixMiner_5.5c, i had 15 Mh hash.. i tried mod bios. cumpute mod.. amd miner drivers, and nothing appened.. still 15 Mh.. i tried to restore all, and now i have 9 Mh of hash.. there is some tutorial to put it at 30 mH... i google and can't find nothing usefull

[pafu]

Without bios mod:




https://bitcointalk.org/index.php?topic=5319323.msg56414120#msg56414120

[text70]

i have MSI RX 590 ARMOR OC.. first time i tried  PhoenixMiner_5.5c, i had 15 Mh hash.. i tried mod bios. cumpute mod.. amd miner drivers, and nothing appened.. still 15 Mh.. i tried to restore all, and now i have 9 Mh of hash.. there is some tutorial to put it at 30 mH... i google and can't find nothing usefull

No bios mod ~30.23 Mh/s, 90W

Card settings: MSI Amor 590 OC
radeon 20.12.1
1175 Mhz core  @ 1087mV
2285 Mhz Mem @ 975mV

Added:github Eliovp/amdmemorytweak/
WinAMDTweak.exe -REF 40

Miner:
Teamredminer --eth_config=B

[FireBallex]

Hi.

I'm running into an issue here. I recently bought an RX 590 (Gigabyte) and it has apparently a new set of Samsung memories (K4G80325FC) which are unrecognized in PBE 1.7.2 for the "one-click mod".

I would vastly appreciate if this could be made to my card, the BIOS mod.

If it is any help, it is a "Revision 2.0" model of the RX590 from Gigabyte.

Any extra information you could need I could provide.

I am only achieving 27.5 MH/s in ETH/ETC Claymore/Phoenix, when I was doing 30.5 MH/s on my old Asrock RX 580 (8 GB)

I am highly interested in making this work for these cards for everybody, so if you guys need any extra information about the card, just ask away.

Many thanks,

Juan. - Buenos Aires, Argentina

I buy the same Gygabyte RX590 gaming Rev2 at black friday and it's just horrible... stock i have these speed... i didn't understand how you can have 27.5 on ETC, i have 10 on Clay and 15 on phoenix... My benchmark

Just because rx580 is getting 30MH doesn't mean RX590 will do the same the easy way, they aren't same gpu and you have to find it's best performing spot yourself, some are getting 30mh on rx590 with no BIOS mod, stay busy with msi afterburner