Bitcoin Forum
November 07, 2024, 12:47:38 PM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 »  All
  Print  
Author Topic: Stupid mistake  (Read 280 times)
Gorosden (OP)
Member
**
Offline Offline

Activity: 518
Merit: 30

$CYBERCASH METAVERSE


View Profile
February 16, 2021, 08:54:55 AM
 #1

I messed up pretty bad this morning, I got 4 risers I was trying to install and I mistakenly insert one riser in the wrong direction, I saw a smoke from the slot and I instantly remove the riser but little do I know that my gpu won't ever display again

Stanlo
Full Member
***
Offline Offline

Activity: 952
Merit: 110


View Profile
February 16, 2021, 08:59:10 AM
 #2

Oops, I believe only a beginner can make sure mistake, anyways there is always a first time for everything, it happened to me once, it was a new card and I've not even make 30% ROI back on the card, next time you got to be careful, throw the card away because it's never going to work
Sourhearrt
Member
**
Offline Offline

Activity: 166
Merit: 12


View Profile
February 16, 2021, 09:13:27 AM
 #3

Are you sure the card is dead? Find another PC and insert the card but insert HDMI display cable on motherboard instead of the card itself, if your motherboard don't have hdmi use vga and go through gpuz or msi afterburner to see if the card is detected

Swaap | Nova Bank
----------------------------------------------
[ GET | ACCEPT | EXCHANGE | WALLETS ]
TanakabZX
Member
**
Offline Offline

Activity: 504
Merit: 16


View Profile
February 16, 2021, 09:39:02 AM
 #4

Sorry for your loss, we can't learn without big mistakes sometimes, I'm sure this happened to lots of people on here already, since you ordered for four risers then you have 4 graphics cards, it's not over mate, be strong

▬▬▬▬▬▬▌   Vulcan Forged    ▐▬▬▬▬▬▬
▬▬▬▬▬▬▌    Telegram   ▌    Discord      ▌     Twitter      ▐▬▬▬▬▬▬
▬▬▬▬▬▬▬▬▬▬▬▬▬▬   DISCOVER   ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OasisDre
Member
**
Offline Offline

Activity: 532
Merit: 41


View Profile
February 16, 2021, 10:29:25 AM
 #5

🤔 damn! You must have put the 12v on 3v in the PCie slot, forget that PCIe slot cos it's never going to work again and also the graphic card must have taken high voltage hit too, this was how I killed a R9 380 when it was freaking costly years ago, be more careful next time when dealing with risers

▬▬▬▬▬▬▌   Vulcan Forged    ▐▬▬▬▬▬▬
▬▬▬▬▬▬▌    Telegram   ▌    Discord      ▌     Twitter      ▐▬▬▬▬▬▬
▬▬▬▬▬▬▬▬▬▬▬▬▬▬   DISCOVER   ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Claudio99
Member
**
Offline Offline

Activity: 210
Merit: 10

Sovryn - Brings DeFi to Bitcoin


View Profile
February 16, 2021, 03:31:18 PM
 #6

I still don't believe the card is dead, there must be a molex that took the current and died that's why the gpu isn't displaying, I'm not sure you can return even if warrant still covers the gpu since this is on your end, you made the mistake so there is no way out here than try to fix it or give a qualified personal to check it out, the chances of working is pretty low

JayDDee
Full Member
***
Offline Offline

Activity: 1424
Merit: 225


View Profile
February 16, 2021, 05:19:05 PM
 #7

I have to agree with the subject. It's also difficult mistake to make, it should have been obviously wrong
just by looking at it before reconnecting the power.

There is likely colateral damage: the GPU, the mobo (if you're lucky only 1 dead slot), the riser.
Test everything seperately to be sure.

jessyj48
Member
**
Offline Offline

Activity: 756
Merit: 14


View Profile
February 16, 2021, 06:16:58 PM
 #8

I have to agree with the subject. It's also difficult mistake to make, it should have been obviously wrong
just by looking at it before reconnecting the power.

There is likely colateral damage: the GPU, the mobo (if you're lucky only 1 dead slot), the riser.
Test everything seperately to be sure.
Mistake is mistake, I'm guessing OP is a newbie to crypto mining, that can be another reason for the easy mistake, now I'm sure such will never happen again because it's going to be painful to lost such valuable item just like that, OP will learn big from this

Swaap | Nova Bank
----------------------------------------------
[ GET | ACCEPT | EXCHANGE | WALLETS ]
batsonxl
Member
**
Offline Offline

Activity: 1204
Merit: 27


View Profile
February 16, 2021, 06:59:21 PM
 #9

card is dead. cost of repair maybe too expensive.
MinLum
Newbie
*
Offline Offline

Activity: 34
Merit: 0


View Profile
February 16, 2021, 09:22:31 PM
 #10

Is this a joke post?  How do you plug in a riser in the wrong direction?  Do you have a pic?  Are you referring to the part that goes in the 1x slot?
philipma1957
Legendary
*
Offline Offline

Activity: 4298
Merit: 8804


'The right to privacy matters'


View Profile WWW
February 16, 2021, 09:30:27 PM
 #11

Is this a joke post?  How do you plug in a riser in the wrong direction?  Do you have a pic?  Are you referring to the part that goes in the 1x slot?

there are 2 ways to do it.

it had a four pin molex  and he put the molex in upside down.

or he plugged the 1x pcie in backwards.

both are possible to do.  but the card may have survived and the riser died.  or the pcie slot died on the mobo.

If the card was perfectly new and never used and no longer works it does not mean he killed the card.

Since he never tested it and knew it to work he can say it never worked and not be lying if he wants an rma.

He may have just killed off the riser and or the pcie slot and the new card came doa.

It can not be sure if it happened the way I just said.

For instance I have

13 amd 5500
16 amd 5600
15 amd 5700

44 good cards

and 2 DOA asus dual 5700 xt

So if that happened to me on 2 of 46 cards I would not be at fault
and on the other 44 I would be at fault.

Just saying maybe the op has legit wiggle room.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
th00ber
Hero Member
*****
Offline Offline

Activity: 789
Merit: 501


View Profile
February 17, 2021, 08:43:40 AM
 #12

A pic ? How can you made such an error ? 0_o
RabbiTANK
Member
**
Offline Offline

Activity: 224
Merit: 18

Sovryn - Brings DeFi to Bitcoin


View Profile
February 17, 2021, 08:48:35 AM
 #13

Is this a joke post?  How do you plug in a riser in the wrong direction?  Do you have a pic?  Are you referring to the part that goes in the 1x slot?
It's very possible, grab a motherboard you aren't using and a bad riser connector to give a try you will see that it's 💯 possible, I killed a Nvidia card this way some time ago and it thus affects me because I couldn't get my ROI faster

Gorosden (OP)
Member
**
Offline Offline

Activity: 518
Merit: 30

$CYBERCASH METAVERSE


View Profile
February 17, 2021, 08:51:03 AM
 #14

Is this a joke post?  How do you plug in a riser in the wrong direction?  Do you have a pic?  Are you referring to the part that goes in the 1x slot?

there are 2 ways to do it.

it had a four pin molex  and he put the molex in upside down.

or he plugged the 1x pcie in backwards.

both are possible to do.  but the card may have survived and the riser died.  or the pcie slot died on the mobo.

If the card was perfectly new and never used and no longer works it does not mean he killed the card.

Since he never tested it and knew it to work he can say it never worked and not be lying if he wants an rma.

He may have just killed off the riser and or the pcie slot and the new card came doa.

It can not be sure if it happened the way I just said.

For instance I have

13 amd 5500
16 amd 5600
15 amd 5700

44 good cards

and 2 DOA asus dual 5700 xt

So if that happened to me on 2 of 46 cards I would not be at fault
and on the other 44 I would be at fault.

Just saying maybe the op has legit wiggle room.
The funny part is riser still works, only the connector to motherboard burns but the pcie slot and riser cable works very well, now the card isn't displaying anymore, I've tried in 5 different motherboards just to confirm but no luck

Gorosden (OP)
Member
**
Offline Offline

Activity: 518
Merit: 30

$CYBERCASH METAVERSE


View Profile
February 17, 2021, 09:31:19 AM
 #15

A pic ? How can you made such an error ? 0_o
I wasn't in my best mood when building the rigs, I was so tired but couldn't postpone the building of the rig, here is what happened, I turned the riser upside down, very stupid of me



Look at that, very silly and stupid of me

Gorosden (OP)
Member
**
Offline Offline

Activity: 518
Merit: 30

$CYBERCASH METAVERSE


View Profile
February 17, 2021, 10:12:22 AM
 #16

As the motherboard start smoking I instantly remove the riser but it was too late, another mistake is the motherboard was in idle mode, If I've pulled the plug I may have been suspicious about how I connected the riser, it happens very fast, here is the end result


fmz89
Legendary
*
Offline Offline

Activity: 1762
Merit: 1002



View Profile
February 17, 2021, 12:32:10 PM
 #17

A pic ? How can you made such an error ? 0_o
I wasn't in my best mood when building the rigs, I was so tired but couldn't postpone the building of the rig, here is what happened, I turned the riser upside down, very stupid of me



Look at that, very silly and stupid of me
well thats was something unexpected to see this day, bad luck happen, cant rewind the situation, try to fix the gpu by using steam solder, even most likely wont fix it

so prefent in the future this mistake wont happen again, change the motherboard use with full pcie express, minimise put wrong slot

  ▄█▀                       ▀█▄
 ██           ▄▄ ▄▄           ██
███       ▄ ▄███ ███▄ ▄       ███
████▄   ███ ████ ████ ███   ▄████
 ██████████ ███▀ ▀▀▄▄▄▄▄ ▄██████
  ▀▀███████  ▀▄█████████ ████▀▀
       ███▀▄ ██████▀▀▀ ▄▄
       █▀▄██ ████▄▄█▀▄████
        ████ ▀█████▄▀██▀
        ████ █▄▀█████▄
        ████  ▀▀ █████▀
         ▀▀█      ▀█▀
.REXX.|||
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
███████████▀    ▐███████
███████████    ▄▄█████████
▐██████████▀    ▀▀█████████▌
▐█████████▌       █████████▌
▐███████████    ███████████▌
███████████    ███████████
██████████    ██████████
▀████████▄  ▄████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
███████████████▀▀  █████
████████████▀▀      ██████
▐████████▀▀   ▄▄     ██████▌
▐████▀▀    ▄█▀▀     ███████▌
▐████████ █▀        ███████▌
████████ █ ▄███▄   ███████
████████████████▄▄██████
▀████████████████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
████ ▄▀██████████  █████
██████▄▀▄▀██████  ████████
▐████████▄▀▄▀██  ██████████▌
▐██████████▄▀▄ ████████████▌
▐██████████  ▄▀▄▀██████████▌
████████  ████▄▀▄▀████████
█████  ████████▄▀ ██████
▀████████████████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
|.BUY REXX.
FP91G
Legendary
*
Offline Offline

Activity: 1820
Merit: 1124



View Profile
February 17, 2021, 01:02:36 PM
 #18

Is this a joke post?  How do you plug in a riser in the wrong direction?  Do you have a pic?  Are you referring to the part that goes in the 1x slot?

there are 2 ways to do it.

it had a four pin molex  and he put the molex in upside down.

or he plugged the 1x pcie in backwards.

both are possible to do.  but the card may have survived and the riser died.  or the pcie slot died on the mobo.

If the card was perfectly new and never used and no longer works it does not mean he killed the card.

Since he never tested it and knew it to work he can say it never worked and not be lying if he wants an rma.

He may have just killed off the riser and or the pcie slot and the new card came doa.

It can not be sure if it happened the way I just said.

For instance I have

13 amd 5500
16 amd 5600
15 amd 5700

44 good cards

and 2 DOA asus dual 5700 xt

So if that happened to me on 2 of 46 cards I would not be at fault
and on the other 44 I would be at fault.

Just saying maybe the op has legit wiggle room.
The funny part is riser still works, only the connector to motherboard burns but the pcie slot and riser cable works very well, now the card isn't displaying anymore, I've tried in 5 different motherboards just to confirm but no luck
Remove the cooling system from your graphics card and check all fuses with a multimeter. You may be in luck.
You can try reading the technical documentation and figure out what this contact is responsible for. If the video chip is damaged as a result of a short circuit, sell the video card for spare parts.
Be careful and take your time.

█████████████████████████
████████▀▀████▀▀█▀▀██████
█████▀████▄▄▄▄████████
███▀███▄███████████████
██▀█████████████████████
█████████████████████████
█████████████████████████
█████████████████████████
██▄███████████████▀▀▄▄███
███▄███▀████████▀███▄████
█████▄████▀▀▀▀████▄██████
████████▄▄████▄▄█████████
█████████████████████████
 
 BitList 
█▀▀▀▀











█▄▄▄▄
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
.
REAL-TIME DATA TRACKING
CURATED BY THE COMMUNITY

.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀▀█











▄▄▄▄█
 
  List #kycfree Websites   
Festac
Member
**
Offline Offline

Activity: 210
Merit: 10


View Profile
February 17, 2021, 03:36:13 PM
 #19

A pic ? How can you made such an error ? 0_o
I wasn't in my best mood when building the rigs, I was so tired but couldn't postpone the building of the rig, here is what happened, I turned the riser upside down, very stupid of me



Look at that, very silly and stupid of me
well thats was something unexpected to see this day, bad luck happen, cant rewind the situation, try to fix the gpu by using steam solder, even most likely wont fix it

so prefent in the future this mistake wont happen again, change the motherboard use with full pcie express, minimise put wrong slot
Steam solder can't fix this type of fried gpu because this doesn't happened because of overheating, its high wattage problem so there is no way to fix the card, my advice is if warranty is still on the card OP shouldn't void that and try returning back, who knows? You can get a brand new

FP91G
Legendary
*
Offline Offline

Activity: 1820
Merit: 1124



View Profile
February 18, 2021, 10:18:36 AM
 #20

You can get a brand new
For one and check the qualifications of the service center workers Cheesy

█████████████████████████
████████▀▀████▀▀█▀▀██████
█████▀████▄▄▄▄████████
███▀███▄███████████████
██▀█████████████████████
█████████████████████████
█████████████████████████
█████████████████████████
██▄███████████████▀▀▄▄███
███▄███▀████████▀███▄████
█████▄████▀▀▀▀████▄██████
████████▄▄████▄▄█████████
█████████████████████████
 
 BitList 
█▀▀▀▀











█▄▄▄▄
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
.
REAL-TIME DATA TRACKING
CURATED BY THE COMMUNITY

.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀▀█











▄▄▄▄█
 
  List #kycfree Websites   
Pages: [1] 2 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!