Bitcoin3

[Walker-D-Plank]

Need a mining pool

Does anyone here running this mining pool?
It started BTC3 mining pool earlier.

It may be a good time to support now for BTC3.

  

my usb gekko newpac miner woulnt connect Ill try asic, nope its dead

If you have a gekko USB miner, you should be able to solo mine on your PC.
The command would be something like following (which is same as BTC):

./cgminer -o http://127.0.0.1:30267 -u USERNAME -p PASSWORD --btc-address WALLET --gekko-2pac-freq 75

I used to have one working but my gekko miner was broken a while ago with no reason.
Hope you manage to mine.

I think the pool is being worked on still, my gekko is at freq 500 but with a fan off a asic miner on a veryable control to slow it down works great over 100 gh/s, it wont solo a wallet thats no good

I will see whether my server can handle this.

If you find blocks and if you like, donate to my BTC3:
  
   3fgdHC5WFizgm9p4UgYq3qs3qqMxNA1dGj

my wallet still stuck 11 hours behind even with peers stuck on syncing headers, hope it fixes

[1714967335]

1714967335

[1714967335]

1714967335

[1714967335]

1714967335

[sdnz]

my wallet still stuck 11 hours behind even with peers stuck on syncing headers, hope it fixes

I think when a new block is found, the chain will go forward.

[sdnz]

Beware of hackers blasting your machine

I don't have any coins there so just opening RPC port for BTC3 will be ok.
Thanks for the comment.

Anyway once the BTC3 comes back to normal, I will close and change the password. I wouldn't do this if I had an ASIC miner.

[sdnz]

Current network is way high so I'm not sure just USB miner can find a block soon or not. We may need a mining pool sooner.

  NetworkHash=15.586 TH/s

./bitcoin3-cli getmininginfo
{
  "blocks": 1820,
  "currentblockweight": 31064,
  "currentblocktx": 20,
  "difficulty": 67379265.26289986,
  "networkhashps": 15586200470495.35,
  "pooledtx": 20,
  "chain": "main",
  "warnings": ""
}

[Walker-D-Plank]

Beware of hackers blasting your machine

I don't have any coins there so just opening RPC port for BTC3 will be ok.
Thanks for the comment.

Anyway once the BTC3 comes back to normal, I will close and change the password. I wouldn't do this if I had an ASIC miner.

close it ill wait for the pool for my gekko or asic which might be to much for btc3 @ 14 t

[sdnz]

Beware of hackers blasting your machine

I don't have any coins there so just opening RPC port for BTC3 will be ok.
Thanks for the comment.

Anyway once the BTC3 comes back to normal, I will close and change the password. I wouldn't do this if I had an ASIC miner.

close it ill wait for the pool for my gekko or asic which might be to much for btc3 @ 14 t

Got it.

And could you edit your message in this board quoting my server info and blank them just to be sure not to be used by bad guys. Thanks

[Walker-D-Plank]

Beware of hackers blasting your machine

I don't have any coins there so just opening RPC port for BTC3 will be ok.
Thanks for the comment.

Anyway once the BTC3 comes back to normal, I will close and change the password. I wouldn't do this if I had an ASIC miner.

close it ill wait for the pool for my gekko or asic which might be to much for btc3 @ 14 t

Got it.

And could you edit your message in this board quoting my server info and blank them just to be sure not to be used by bad guys. Thanks

already deleted

[sdnz]

already deleted

in #183
Thanks

[qqqqqqqqwwsdy]

35owg54eLyBsjwNimjq1CUYa7NituGjMdH
Please give it to airdrop, thank you

[Den11]

Why is my wallet not syncing after block 1820?

[Walker-D-Plank]

Why is my wallet not syncing after block 1820?

same with mine just stuck on syncing headers and quite a few hours behind

[xuzicheng1001]

We dug block 1821, but why is there no reward? Eight blocks in the pool have no reward?

http://121.196.121.176/stats

[Floknar]

Hi BTC3 Team,

As the BTC3 blockchain is stuck for more than 18 hours, and we have no pool so far, something has to be done.
To survive similar situation in future as well as to fix the current issue, I'm proposing to add new logic to the BTC3 core to recover from bad stale (attack) situation.

Please have a look the following code change and if similar code can be added to BTC3 core, we can at least go through now.
Note I put a logic that every 50 minutes ("10" times of the target space) halves the difficulty. And sure to make it's not less than the minimum target.
I've tested with two nodes and working correctly.

Anyone feel free to comment as well.

Code:

    stale_target:

diff --git a/src/pow.cpp b/src/pow.cpp
index 45237b2..e444c2a 100644
--- a/src/pow.cpp
+++ b/src/pow.cpp
@@ -35,6 +35,10 @@ unsigned int GetNextWorkRequired(const CBlockIndex* pindexLast, const CBlockHead
                 return pindex->nBits;
             }
         }
+        else if ((pindexLast->nHeight + 1) >= 1821 && pblock->GetBlockTime() > pindexLast->GetBlockTime() + params.nPowTargetSpacing*10)
+        {
+            return CalculateNextWorkRequiredStale(pindexLast, (pblock->GetBlockTime() - pindexLast->GetBlockTime()) / params.nPowTargetSpacing*10, params);
+        }
         return pindexLast->nBits;
     }
 
@@ -72,6 +76,29 @@ unsigned int CalculateNextWorkRequired(const CBlockIndex* pindexLast, int64_t nF
     return bnNew.GetCompact();
 }
 
+unsigned int CalculateNextWorkRequiredStale(const CBlockIndex* pindexLast, int shift, const Consensus::Params& params)
+{
+    if (params.fPowNoRetargeting)
+        return pindexLast->nBits;
+
+    // Retarget
+    const arith_uint256 bnPowLimit = UintToArith256(params.powLimit);
+    arith_uint256 bnNew;
+    bnNew.SetCompact(pindexLast->nBits);
+
+    for (int i=0; i<shift; i++)
+    {
+        bnNew *= 2;
+        if (bnNew > bnPowLimit)
+        {
+            bnNew = bnPowLimit;
+            break;
+        }
+    }
+
+    return bnNew.GetCompact();
+}
+
 bool CheckProofOfWork(uint256 hash, unsigned int nBits, const Consensus::Params& params)
 {
     bool fNegative;

This could be great modification since if someone has lot of hashing power they can stall the blockchain, as i believe that has happened. They just mine the difficulty to skyrocket and leave. If no action will be taken the blockchain can be stopped.

[MinerDude99]

Hello, I found 5 asics from a long time ago.

How do I use them? What mining software do I use and what is the command I run.

Thanks

That sounds you are lucky :-)
I wish I have one.

You need to run bitcoin3d or bitcoin3-qt on your PC and use mining software like sgminer, cgminer or ccminer for solo mining.
Or pool mining once BTC3 mining pool is available.

There seems already asic mining happening in last 12 hours. Maybe someone else can give more info how they are doing?

They are Silicon Labs CP210x ASICS. I don't think cgminer supports them.

Anyone know what miner software I should use, and if you do, what is the command I run to get these things to work. I don't want to join a pool at this point, just want to solo mine. Thanks

[Den11]

The difficulty has grown very much, now it's easier to wait for an exchange and buy coins as soon as they start to drain it than to mine on a PC

[Floknar]

I'm interested to sell 100-250 BTC3,
Will accept ETH, ESP, BTC.
Make an offer PM.

[Den11]

I'm interested to sell 100-250 BTC3,
Will accept ETH, ESP, BTC.
Make an offer PM.

no exchange yet .....
I can buy for a couple of cents .....50 dogecoin = 250 btc3

[QuattroQ2]

At the beginning, the idea was great to hold back the source code for a week so that the little miners can also earn something. But now my suspicion is getting closer and closer that the dev simply has no idea what he is doing. The blockchain has hung up and there is no way to mine anything. The last confirmed block was over 36 hours ago. Even the airdrop from 2 days ago over 0.001 BTC3 are not confirmed.

Let's take a look at the pool (http://121.196.121.176/stats), it has minted the last 20 blocks and nothing was confirmed there either. Why this secrecy about the source code Publish and integrate pools, but no... Nothing works anymore. You will see BTC3 is dead

[Walker-D-Plank]

At the beginning, the idea was great to hold back the source code for a week so that the little miners can also earn something. But now my suspicion is getting closer and closer that the dev simply has no idea what he is doing. The blockchain has hung up and there is no way to mine anything. The last confirmed block was over 36 hours ago. Even the airdrop from 2 days ago over 0.001 BTC3 are not confirmed.

Let's take a look at the pool (http://121.196.121.176/stats), it has minted the last 20 blocks and nothing was confirmed there either. Why this secrecy about the source code Publish and integrate pools, but no... Nothing works anymore. You will see BTC3 is dead

yes pending since the 14th and I got 7 from today pending still when the pool started working but not right, going to take miner off until fixed

[Walker-D-Plank]

Hello, I found 5 asics from a long time ago.

How do I use them? What mining software do I use and what is the command I run.

Thanks

That sounds you are lucky :-)
I wish I have one.

You need to run bitcoin3d or bitcoin3-qt on your PC and use mining software like sgminer, cgminer or ccminer for solo mining.
Or pool mining once BTC3 mining pool is available.

There seems already asic mining happening in last 12 hours. Maybe someone else can give more info how they are doing?

They are Silicon Labs CP210x ASICS. I don't think cgminer supports them.

Anyone know what miner software I should use, and if you do, what is the command I run to get these things to work. I don't want to join a pool at this point, just want to solo mine. Thanks

link to need to know about the usb miner and software for it https://bitcointalk.org/index.php?topic=5053833.0