itskeule
Newbie
Offline
Activity: 14
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2022, 06:58:58 PM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance.
|
|
|
|
mal1313
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2022, 08:00:49 PM |
|
I have 1 full-node unit and 3 standard unit, have them all plugged for several hours, only one of them is listed on the miner page, the other two are not visible. Their LEDs are solid red. Now im wondering is the full node pre-configured to attach to 1 standard unit only? Known Issues
Q: I have a full package unit and one or more standard units. Some Standard units show 0 hashrate or dont start hashing right away A: USB Driver is a bit finicky for the USB controller on the hashboard. It can take several minutes for the controller to establish a good connection to the Standard unit and start hashing, so please wait 10-15 minutes and it should start up on its own. If you keep pressing restart the software won't have time to properly start up the hashboards.
|
|
|
|
hcraig4
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 02:30:46 AM |
|
Hey guys….just wanted to follow-up on Stratum V2 - is that being developed for any other reason than asicboost or auto-tuning? Braiins OS? What does that pipeline timeline look like?
|
|
|
|
jhartbarger
Copper Member
Jr. Member
Offline
Activity: 81
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 03:34:35 AM |
|
Has anyone know of a working package for RDP or Teamviewer for the Full node unit ?
|
|
|
|
heslo
Legendary
Offline
Activity: 1197
Merit: 1126
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 01:47:42 PM |
|
Has anyone know of a working package for RDP or Teamviewer for the Full node unit ?
Something like TightVNC should work
|
|
|
|
SpeedForceGN
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 02:01:03 PM |
|
Has anyone know of a working package for RDP or Teamviewer for the Full node unit ?
Something like TightVNC should work Won't installing it to the Miner/node break the system?
|
|
|
|
heslo
Legendary
Offline
Activity: 1197
Merit: 1126
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 02:31:45 PM |
|
Has anyone know of a working package for RDP or Teamviewer for the Full node unit ?
Something like TightVNC should work Won't installing it to the Miner/node break the system? No, I don't think it will touch or overwrite any dependency that the miner software uses. Worst case if it breaks just reflash the SD but I'm 99.9% sure you'll have no issues
|
|
|
|
thak777
Newbie
Offline
Activity: 14
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2022, 04:59:43 PM |
|
The node finally finished syncing last night.
When I came to check on the machine this morning, it was no longer showing the USB device as connected. Couple of questions:
1) Is there a command I can use to force the device to reconnect?
2) Are there logs somewhere that can help me identify what's going on?
What USB device? Flash card or mouse/key board? No. I mean the Standard isn't detected. I only have Hashboard #0 showing. The LED on the Standard is solid red.
|
|
|
|
ROcrypto
Copper Member
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2022, 02:14:19 AM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance. how to reset to factory defaults ??
|
|
|
|
hcraig4
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2022, 03:17:12 AM |
|
Hey guys….just wanted to follow-up on Stratum V2 - is that being developed for any other reason than asicboost or auto-tuning? Braiins OS? What does that pipeline timeline look like?
Anyone care to take a stab at this? @jstefanop?
|
|
|
|
SpeedForceGN
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2022, 03:26:06 AM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance. how to reset to factory defaults ?? Flash the SD Card
|
|
|
|
poonasor
Jr. Member
Offline
Activity: 49
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2022, 02:12:07 PM |
|
Noticing that my node is offline, everything looks correct - could it be the 500gb is full? has anyone seen this before? Node is offline Double-check your NVMe SSD is seated correctly on the M.2 slot on the bottom of your device and restart your Apollo. If the node is still not loading, you can try re-formatting your node drive in the settings section of the dashboard also, i switched my pool to prohashing and it seems that 1 of the hashboards is inactive, it was just working on slushpool today
|
|
|
|
Tempestblack
Newbie
Offline
Activity: 18
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2022, 06:35:59 PM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance. how to reset to factory defaults ?? Wazzzzz up.... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ...now I know that we like to come on here and post questions and queries when we run into an issue with the miners and hey it is ok for I have posted a question on here at times myself...but indeed reach out also with your question to the support desk or team at Futurebit itself...it is why I was instructed to do at one time and they did respond to me... that email link addy as to where to write to them is... order@futurebit.io ...so indeed just post the question you do here on the forum to the email addy for them I just posted and well then wait for a response and well keep checking on here just in case as well...Ok folks I am outta here for a minute again...have to corral them chickens...hehehehe... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Dr. J my man hope you and the crew are doing well and that things are churning along... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Laterrrssss... ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) P.S. Oh by the way...Dr. J or anyone there at Futurebit...did any of you find or have the temperature numbers for the Futurebit miners...meaning at different settings in the configuration of the miner what are the temp ranges...so that well the users can just keep an eye out for the temps on the miners and that way no one damages their miner by accident you know...ok someone there hit us up on them numbers...thanks
|
|
|
|
|
primaris
Newbie
Offline
Activity: 16
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 12:51:59 PM |
|
Hi guys,
Given the limited hard drive for the node that comes inside the Futurebit Apollo BTC, I am thinking of increasing the hard drive; I think that keeping nodes running indefinitely is important because if each of us did this, it would keep the network strong and decentralized, but I am not sure exactly how to approach it. Can I simply attach an external SDD drive to it via its USB ports, or must I figure out how to install a larger internal hard drive?
Thanks!
|
|
|
|
WLColsher
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 03:50:32 PM |
|
Hi guys,
Given the limited hard drive for the node that comes inside the Futurebit Apollo BTC, I am thinking of increasing the hard drive; I think that keeping nodes running indefinitely is important because if each of us did this, it would keep the network strong and decentralized, but I am not sure exactly how to approach it. Can I simply attach an external SDD drive to it via its USB ports, or must I figure out how to install a larger internal hard drive?
Thanks!
If you have a "Batch 3" unit, the 1TB SSD is currently less than half full, so it's good for a quite some time. If you have an older unit with the (now) nearly full 500GB SSD, just buy a 1TB NVMe SSD, shut down and power off, replace the 500GB SSD (it's obvious when you turn the unit over), and fire it all up again. It will take a couple days to sync again of course.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 06:37:22 PM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance. how to reset to factory defaults ?? Wazzzzz up.... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ...now I know that we like to come on here and post questions and queries when we run into an issue with the miners and hey it is ok for I have posted a question on here at times myself...but indeed reach out also with your question to the support desk or team at Futurebit itself...it is why I was instructed to do at one time and they did respond to me... that email link addy as to where to write to them is... order@futurebit.io ...so indeed just post the question you do here on the forum to the email addy for them I just posted and well then wait for a response and well keep checking on here just in case as well...Ok folks I am outta here for a minute again...have to corral them chickens...hehehehe... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Dr. J my man hope you and the crew are doing well and that things are churning along... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Laterrrssss... ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) P.S. Oh by the way...Dr. J or anyone there at Futurebit...did any of you find or have the temperature numbers for the Futurebit miners...meaning at different settings in the configuration of the miner what are the temp ranges...so that well the users can just keep an eye out for the temps on the miners and that way no one damages their miner by accident you know...ok someone there hit us up on them numbers...thanks Fan controller automatically regulates temps within 60-70c which is normal operating range for all modes. In hotter environments/custom settings/turbo mode etc it can get to over 70c, but the chips are designed to operate at 80c continuously. Would not get worried unless you see temps above 80c.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 06:40:08 PM |
|
Hey guys….just wanted to follow-up on Stratum V2 - is that being developed for any other reason than asicboost or auto-tuning? Braiins OS? What does that pipeline timeline look like?
Anyone care to take a stab at this? @jstefanop? We are focused on direct solo mining, and expansion of apps included by default in the FutureBit OS right now (block explores, LND, wallets etc). Well probably work on startum v2 stuff after these are launched. Thank you Futurebit for delivering what you promised. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2F6PQnFcG&t=665&c=dPjXbFm_l49uJg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FB41NMVc&t=665&c=R1EptPWNWj3DTg) Cant wait to see what developments are in the works! And thank you for supporting us which is allowing us to deliver what we promised!
|
|
|
|
pancakedeluxe
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 06:48:08 PM |
|
hello, thank you for everything. Is there any timeline when solo mining on our node will come?
|
|
|
|
SpeedForceGN
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 03, 2022, 06:55:38 PM |
|
Edit: I think my brother figured it out, DMZ was enabled and the FutureBit was the only thing on that list, maybe that's how they're getting in?
Assuming you have a consumer-grade router with DMZ enabled, your Apollo was likely compromised in seconds than minutes! Never ever put any device in such a DMZ without knowing what you are doing. (Such consumer-grade DMZs have most likely every port open - from SSH, HTTP, HTTPS, every port from 0 to 65535 ...) So, it seems your brother figured it out! Good! Remove Apollo from DMZ and back in the LAN where it should belong firsthand. Reset the Apollo to factory defaults and start hashing without any more disturbance. how to reset to factory defaults ?? Wazzzzz up.... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ...now I know that we like to come on here and post questions and queries when we run into an issue with the miners and hey it is ok for I have posted a question on here at times myself...but indeed reach out also with your question to the support desk or team at Futurebit itself...it is why I was instructed to do at one time and they did respond to me... that email link addy as to where to write to them is... order@futurebit.io ...so indeed just post the question you do here on the forum to the email addy for them I just posted and well then wait for a response and well keep checking on here just in case as well...Ok folks I am outta here for a minute again...have to corral them chickens...hehehehe... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Dr. J my man hope you and the crew are doing well and that things are churning along... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ...Laterrrssss... ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) P.S. Oh by the way...Dr. J or anyone there at Futurebit...did any of you find or have the temperature numbers for the Futurebit miners...meaning at different settings in the configuration of the miner what are the temp ranges...so that well the users can just keep an eye out for the temps on the miners and that way no one damages their miner by accident you know...ok someone there hit us up on them numbers...thanks Fan controller automatically regulates temps within 60-70c which is normal operating range for all modes. In hotter environments/custom settings/turbo mode etc it can get to over 70c, but the chips are designed to operate at 80c continuously. Would not get worried unless you see temps above 80c. Awesome news. I was wondering that myself. With an external fan under the Apollo, I never see over 60*.....
|
|
|
|
|