[KSC] KASHMIRCOIN - MANDATORY UPDATE! - - - "BURIED" POW - cWallet - 50% POS

[crocko]

@Kashmircoin

Hello !
Have you announced the current exchanges where KSC can be traded about the fork ?
I wanted to withdraw some KSC from Swisscex today to my upgraded wallet but the withdraw was not performed.
Can be this the reason ?

[1714894512]

1714894512

[1714894512]

1714894512

[silversonx]

@dev,

I like your design of KSC new wallet but unfortunately I can't see the console working for me 

When I try to run a command inside the console, my KSC wallet crashes

https://i.imgur.com/FAooAvT.png

And when I restart the wallet again, this runtime error persists

Console should be a very basic function of a working wallet, could you please fix it asap??

I am having the same issue as soon as I start the wallet. I just downloaded the wallet today. I tried re-installing.

I found this on Microsoft http://support.microsoft.com/kb/884538

Here is how I fixed it:

1. Install the packages found here:

https://www.microsoft.com/en-ca/download/details.aspx?id=8328

https://www.microsoft.com/en-ca/download/confirmation.aspx?id=30679

2. Restart the computer

3. Good to go!

Thanks VERY much!

[KashmirCoin]

@Kashmircoin

Hello !
Have you announced the current exchanges where KSC can be traded about the fork ?
I wanted to withdraw some KSC from Swisscex today to my upgraded wallet but the withdraw was not performed.
Can be this the reason ?

Hello!

Of course, they were announced. AllCrypt replied within a minute (they are great) and they wallet should work fine. But i didn't receive the answer from Swisscex, i send them a message by e-mail and left the post in their thread. So, maybe they didn't updated their wallet, but i will ask them again.

[KashmirCoin]

@dev,

I like your design of KSC new wallet but unfortunately I can't see the console working for me 

When I try to run a command inside the console, my KSC wallet crashes



And when I restart the wallet again, this runtime error persists

Console should be a very basic function of a working wallet, could you please fix it asap??

I am having the same issue as soon as I start the wallet. I just downloaded the wallet today. I tried re-installing.

I found this on Microsoft http://support.microsoft.com/kb/884538

Here is how I fixed it:

1. Install the packages found here:

https://www.microsoft.com/en-ca/download/details.aspx?id=8328

https://www.microsoft.com/en-ca/download/confirmation.aspx?id=30679

2. Restart the computer

3. Good to go!

Nice to know the hotfix works for you

For me, I didn't get this problem when I started the wallet. The wallet could open and could fully sync without problem if I didn't touch the console. I got this problem only when I tried to run a command inside the console.

The console failed on both of my Windows 7 and XP machines (32bit)

Today I've tried to install the hotfix you mentioned on my XP machine. However, the console still does not work

Anyway the dev already sent me PM and has promised to fix this problem. It seems I'll have to wait for his fix to get it run again

I work on the update now, thanks for your patience.

[KashmirCoin]

Here's our second Bittrex pic from twitter:



https://twitter.com/KashmirCoin/status/506521102731214849/

Please, share and retweet it

[IMJim]

Hey dev.......I too am having problems with my wallet now.  Lost a couple hours today playing with it and did get it working and fully synced several times, but each time ends in error when loading after it is shut down again.  Same c++ error I think others are seeing.  I did not want to install the posted C++ updates from Microsoft without hearing from you that we should do that, I think may be better to just wait for the update as I am not in a hurry to move any of my coins so is not a problem for me and Microsoft recommends not running those updates unless needed as they will be in a soon to be released full update.

Am I cool to just wait for you to finish the next update brother?

[KashmirCoin]

Hey dev.......I too am having problems with my wallet now.  Lost a couple hours today playing with it and did get it working and fully synced several times, but each time ends in error when loading after it is shut down again.  Same c++ error I think others are seeing.  I did not want to install the posted C++ updates from Microsoft without hearing from you that we should do that, I think may be better to just wait for the update as I am not in a hurry to move any of my coins so is not a problem for me and Microsoft recommends not running those updates unless needed as they will be in a soon to be released full update.

Am I cool to just wait for you to finish the next update brother?

Hello!

You're right, don't worry, update will be ready soon. And thanks for your patience

[KashmirCoin]

@Kashmircoin

Hello !
Have you announced the current exchanges where KSC can be traded about the fork ?
I wanted to withdraw some KSC from Swisscex today to my upgraded wallet but the withdraw was not performed.
Can be this the reason ?

Swisscex just have updated their wallet, please try again.

[IMJim]

No worries at all bud, thanks for the response!  Many thanks for recent works man, a few little problems with all that was added and upgraded is much expected!!

[KashmirCoin]

No worries at all bud, thanks for the response!  Many thanks for recent works man, a few little problems with all that was added and upgraded is much expected!!

Thank you very much for your response too, it's very nice to see!

[adam13]

i downloaded new wallet and installed. it look fine and sudden it crashed. i deleted it. and installed again..it work fine but my last 71 transactions after  8/31/2014 15:11 are not confirming, and transaction detail show the status as conflicted. and i don't have any confirmation after  8/31/2014 15:55 to 9/1/2014 00.26..all these 71 transactions show CONFLICTED status...i am still mining and i did not get any new transaction after  9/1/2014 00.26...can anyone help...already tried 3-4 times to delete and install wallet again..

[chronicsky]

i downloaded new wallet and installed. it look fine and sudden it crashed. i deleted it. and installed again..it work fine but my last 71 transactions after  8/31/2014 15:11 are not confirming, and transaction detail show the status as conflicted. and i don't have any confirmation after  8/31/2014 15:55 to 9/1/2014 00.26..all these 71 transactions show CONFLICTED status...i am still mining and i did not get any new transaction after  9/1/2014 00.26...can anyone help...already tried 3-4 times to delete and install wallet again..

Hi! re-installing the wallet will not help
Have you added the .conf file ?
and the transactions held up sometimes when sent/received during slow net , they will confirm eventually in 2-3 days but you must not have problem with recieving transations
Is it showing synced (green colour) or out of sync(red colour)

[crocko]

@Kashmircoin

Hello !
Have you announced the current exchanges where KSC can be traded about the fork ?
I wanted to withdraw some KSC from Swisscex today to my upgraded wallet but the withdraw was not performed.
Can be this the reason ?

Swisscex just have updated their wallet, please try again.

Now I received my withdraw, this was the problem. Thank you !

[adam13]

Hi! re-installing the wallet will not help
Have you added the .conf file ?
and the transactions held up sometimes when sent/received during slow net , they will confirm eventually in 2-3 days but you must not have problem with recieving transations
Is it showing synced (green colour) or out of sync(red colour)
[/quote]

i think i delete the old ksc wallet folder,so i guess i did't have conf. file in new wallet...it was connected, and there was green synced showing in new wallet, but all transaction were stuck as conflicted(no confirmation). Actually many of those transactions were confirmed in old wallet. lets see now...actually i did delete the wallet again  . now i am installing old wallet then new wallet. hope that will work.

[crocko]

Hey , there is somebody amongst you who own a VaultBreaker / Titan or some real heavy mining gear ?
I ask this because in the pool there is a miner who digg with more than 300 MH/s .. and because it is a PROP pool the rest of us get only leftovers.. 

[IMJim]

Yeah I decided to pull my little miners, not worth it with the big guy on there.

[adam13]

   Its interesting, i deleted that wallet and files and folder and install old wallet again, all transactions are confirmed and i am getting new transactions. It has only 1 connection to wallet but its syncing ...should i leave old wallet...or install new wallet!!!...for new wallet do i need to keep only wallet.dat file and delete old folder..or just install new wallet as it and keep everything there...how that work...

[adam13]

Hey , there is somebody amongst you who own a VaultBreaker / Titan or some real heavy mining gear ?
I ask this because in the pool there is a miner who digg with more than 300 MH/s .. and because it is a PROP pool the rest of us get only leftovers.. 

thats why net hash rate is that high, anyways which pool you guys are mining...r u mining solo ??

[IMJim]

Hey , there is somebody amongst you who own a VaultBreaker / Titan or some real heavy mining gear ?
I ask this because in the pool there is a miner who digg with more than 300 MH/s .. and because it is a PROP pool the rest of us get only leftovers.. 

thats why net hash rate is that high, anyways which pool you guys are mining...r u mining solo ??

http://pool.kashmircoin.org/

[adam13]

Hey , there is somebody amongst you who own a VaultBreaker / Titan or some real heavy mining gear ?
I ask this because in the pool there is a miner who digg with more than 300 MH/s .. and because it is a PROP pool the rest of us get only leftovers.. 

thats why net hash rate is that high, anyways which pool you guys are mining...r u mining solo ??

http://pool.kashmircoin.org/

when i clicked on that it took me here.....

  It works!

This is the default web page for this server.

The web server software is running but no content has been added, yet.

no more information for that pool??