[ANN] [Twecoin] [TWE] CPU/GPU - 4 op new hash| NO PREMINE| LAUNCHED!

[Xdragon]

Where zhe dev?

Looks like he abandoned this, or on the other hand this coin works perfectly, without problems, so he doesn't need to post here every day. We just need a better exchange.

[provenceday]

we need a better exchange platform.

[Starlightbreaker]

it's on poloniex.
                                                                                                                                                                                                                                                               

[tseug]

hope it will hit poloniex soon or.mintpal

And now, it is

[addictminer]

Out of curiousity, this coin seems very interesting. I am looking forward to supporting it... is there any giveaways happening on this forum thread?

PS: The https://twe.suprnova.cc/ pool for my cudaminer isn`t working, only getting boooo.. Does this coin really support GPU mining?

Thanks.

GL on project

[Syth]

For anyone that uses my sgminer version (https://github.com/badman74/sph-sgminer and https://github.com/badman74/Binaries/archive/master.zip)
The method to set CPU algo's has changed, it is now set with --algorithm instead of --kernel.
also --difficulty-multiplier is only needed if the pool wont accept your shares as the most common diff is already set
this miner can do scrypt, nscrypt, scrypt-jane, plus all the new CPU algo's from PHM
and though i haven't tested it, gridseed ASIC should be supported
please see NEWS.md and /doc/configuration.md for more info

No matter what I do, I keep getting this error and never a single hash.

Code:

[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] GPU 2 failure, disabling!
[18:49:42] GPU 0 failure, disabling!
[18:49:42] GPU 1 failure, disabling!

Any ideas?

are you using --algorithm to set the algo?
also try deleting your old .bin files

I did. but after deleting the old .bin files, no new .bin files were created.

[tseug]

Out of curiousity, this coin seems very interesting. I am looking forward to supporting it... is there any giveaways happening on this forum thread?

PS: The https://twe.suprnova.cc/ pool for my cudaminer isn`t working, only getting boooo.. Does this coin really support GPU mining?

Thanks.

GL on project

There's a link in the OP for a giveaway of 1 twe... not sure if it's ended yet.

GPU mining does work. make sure you're using the twecoin kernel... you might need to update sph-sgminer first.

Also, I haven't mined this for a while but http://twe.nonce-pool.com/ was where I did most of my mining

[addictminer]

Out of curiousity, this coin seems very interesting. I am looking forward to supporting it... is there any giveaways happening on this forum thread?

PS: The https://twe.suprnova.cc/ pool for my cudaminer isn`t working, only getting boooo.. Does this coin really support GPU mining?

Thanks.

GL on project

There's a link in the OP for a giveaway of 1 twe... not sure if it's ended yet.

GPU mining does work. make sure you're using the twecoin kernel... you might need to update sph-sgminer first.

Also, I haven't mined this for a while but http://twe.nonce-pool.com/ was where I did most of my mining

Just finished trying that pool out that you mentioned and it also doesnt work. Keeps showing: "Cannot solve  stratum+tcp"..

[badman74]

For anyone that uses my sgminer version (https://github.com/badman74/sph-sgminer and https://github.com/badman74/Binaries/archive/master.zip)
The method to set CPU algo's has changed, it is now set with --algorithm instead of --kernel.
also --difficulty-multiplier is only needed if the pool wont accept your shares as the most common diff is already set
this miner can do scrypt, nscrypt, scrypt-jane, plus all the new CPU algo's from PHM
and though i haven't tested it, gridseed ASIC should be supported
please see NEWS.md and /doc/configuration.md for more info

No matter what I do, I keep getting this error and never a single hash.

Code:

[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] GPU 2 failure, disabling!
[18:49:42] GPU 0 failure, disabling!
[18:49:42] GPU 1 failure, disabling!

Any ideas?

are you using --algorithm to set the algo?
also try deleting your old .bin files

I did. but after deleting the old .bin files, no new .bin files were created.

the only time i can make this happen is if i am trying to set the algo with -k, or --kernel
it should be --algorithm twecoin, or if you use a .conf "algorithm" : "twecoin",

[badman74]

Out of curiousity, this coin seems very interesting. I am looking forward to supporting it... is there any giveaways happening on this forum thread?

PS: The https://twe.suprnova.cc/ pool for my cudaminer isn`t working, only getting boooo.. Does this coin really support GPU mining?

Thanks.

GL on project

There's a link in the OP for a giveaway of 1 twe... not sure if it's ended yet.

GPU mining does work. make sure you're using the twecoin kernel... you might need to update sph-sgminer first.

Also, I haven't mined this for a while but http://twe.nonce-pool.com/ was where I did most of my mining

Just finished trying that pool out that you mentioned and it also doesnt work. Keeps showing: "Cannot solve  stratum+tcp"..

you might wanna mention where you found an actual working cudaminer for twecoin... i wasn't aware there was one

[DailyModo]

I just bought a couple of twe coin at poloniex, seeing the fact that this is a new energy saving algorithm and how hard it is to mine it i believe it is pretty cheap right now.

[DailyModo]

Anyone can make a block explorer?

[uswapme]

better than x11?

[Syth]

For anyone that uses my sgminer version (https://github.com/badman74/sph-sgminer and https://github.com/badman74/Binaries/archive/master.zip)
The method to set CPU algo's has changed, it is now set with --algorithm instead of --kernel.
also --difficulty-multiplier is only needed if the pool wont accept your shares as the most common diff is already set
this miner can do scrypt, nscrypt, scrypt-jane, plus all the new CPU algo's from PHM
and though i haven't tested it, gridseed ASIC should be supported
please see NEWS.md and /doc/configuration.md for more info

No matter what I do, I keep getting this error and never a single hash.

Code:

[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] GPU 2 failure, disabling!
[18:49:42] GPU 0 failure, disabling!
[18:49:42] GPU 1 failure, disabling!

Any ideas?

are you using --algorithm to set the algo?
also try deleting your old .bin files

I did. but after deleting the old .bin files, no new .bin files were created.

the only time i can make this happen is if i am trying to set the algo with -k, or --kernel
it should be --algorithm twecoin, or if you use a .conf "algorithm" : "twecoin",

'--algorithm twecoin -k twecoin' did the trick.
Thank you very much for your input

[badman74]

For anyone that uses my sgminer version (https://github.com/badman74/sph-sgminer and https://github.com/badman74/Binaries/archive/master.zip)
The method to set CPU algo's has changed, it is now set with --algorithm instead of --kernel.
also --difficulty-multiplier is only needed if the pool wont accept your shares as the most common diff is already set
this miner can do scrypt, nscrypt, scrypt-jane, plus all the new CPU algo's from PHM
and though i haven't tested it, gridseed ASIC should be supported
please see NEWS.md and /doc/configuration.md for more info

No matter what I do, I keep getting this error and never a single hash.

Code:

[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] Error: clSetKernelArg of all params failed.
[18:49:42] GPU 2 failure, disabling!
[18:49:42] GPU 0 failure, disabling!
[18:49:42] GPU 1 failure, disabling!

Any ideas?

are you using --algorithm to set the algo?
also try deleting your old .bin files

I did. but after deleting the old .bin files, no new .bin files were created.

the only time i can make this happen is if i am trying to set the algo with -k, or --kernel
it should be --algorithm twecoin, or if you use a .conf "algorithm" : "twecoin",

'--algorithm twecoin -k twecoin' did the trick.
Thank you very much for your input

on this version
-k is for scrypt kernels only

[twe]

Exchanges

https://exarena.net/markets/twe-btc/

https://poloniex.com/exchange/btc_twe

[DailyModo]

Exchanges

https://exarena.net/markets/twe-btc/

https://poloniex.com/exchange/btc_twe

Great,

Wheres the bloc explorer we need to get this added to coinmarketcap and they require a bloc explorer.

[twe]

Exchanges

https://exarena.net/markets/twe-btc/

https://poloniex.com/exchange/btc_twe

Great,

Wheres the bloc explorer we need to get this added to coinmarketcap and they require a bloc explorer.

Is Block Crawler can be OK?

[ocminer]

Hey folks,

we've also added a Pool:

https://twe.suprnova.cc

It's currently 0% fee as we search for the first Block
Stratum + Vdiff
Idle Notifs
Block + Payout Notifs
All the goodies you would expect
Suprnova Quality


Any problems here in the thread or PM me.

[DailyModo]

Exchanges

https://exarena.net/markets/twe-btc/

https://poloniex.com/exchange/btc_twe

Great,

Wheres the bloc explorer we need to get this added to coinmarketcap and they require a bloc explorer.

Is Block Crawler can be OK?

Only something that they can see how much coins are in circulation for their daily updates so if block crawler offer this then i think it might.

Or if there is some1 willing to take a bounty for making the block explorer it would be even better.