CgminerMonitor.com - cloud monitor for all your miners!

[tuanvie]

I am a new user.
Here I found some problems which I do not understand, I hope you can help me

1. What should I fill in for the "config file?
I did not find the config file in cgminer me, please help

You type in where your config file is located.

I do not have a config for it, just that I'm confused,
could help me create a config file?

[chadwickx16]

Great program, testing it out now; is it possible to use the build from source method on BAMT? Killed my rig today trying to do it remotely.

Yes it is. Please use "Compile from source" instructions on http://cgminermonitor.com/GetStarted page. If that was your way, please add more details what happened.

I have no idea what happened when I installed it the first time, but installed it a second time and all is well now.  Thanks!

[chadwickx16]

I am a new user.
Here I found some problems which I do not understand, I hope you can help me

1. What should I fill in for the "config file?
I did not find the config file in cgminer me, please help

You type in where your config file is located.

I do not have a config for it, just that I'm confused,
could help me create a config file?

What are you using to send your gpu custom settings??  But sure, I'll help you. If you have teamviewer PM me.

[tuanvie]

I am a new user.
Here I found some problems which I do not understand, I hope you can help me

1. What should I fill in for the "config file?
I did not find the config file in cgminer me, please help

You type in where your config file is located.

I do not have a config for it, just that I'm confused,
could help me create a config file?

What are you using to send your gpu custom settings??  But sure, I'll help you. If you have teamviewer PM me.

I use a 1.3 MH fury gawminers

[chadwickx16]

I am a new user.
Here I found some problems which I do not understand, I hope you can help me

1. What should I fill in for the "config file?
I did not find the config file in cgminer me, please help

You type in where your config file is located.

I do not have a config for it, just that I'm confused,
could help me create a config file?

What are you using to send your gpu custom settings??  But sure, I'll help you. If you have teamviewer PM me.

I use a 1.3 MH fury gawminers

How do you launch your miner?? with a bat file?

[TheMoen]

I cannot start up the client
(Also miner is running on PiMP 1.5.5)
http://i.gyazo.com/03c3250c6c1751b8a3e715993f0e0e41.png

[cgminermonitor]

I cannot start up the client
(Also miner is running on PiMP 1.5.5)

For PiMP > 1.5 please follow "Linux (BAMT)" instructions.

[tuanvie]

I am a new user.
Here I found some problems which I do not understand, I hope you can help me

1. What should I fill in for the "config file?
I did not find the config file in cgminer me, please help

You type in where your config file is located.

I do not have a config for it, just that I'm confused,
could help me create a config file?

What are you using to send your gpu custom settings??  But sure, I'll help you. If you have teamviewer PM me.

I use a 1.3 MH fury gawminers

How do you launch your miner?? with a bat file?

yeah right, I run with the bat file

[chadwickx16]

So you can put your commands after the Miner program option, but as of now you don't have a config file. I believe you can create one within CGMiner/BFGMiner; it's under settings.

[cgminermonitor]

I didn't "have" to use Ctrl+F5 but did so because it was quicker/easier than logging out of the site and then logging back in.  That probably would've fixed it too.

Now you can change to pool, which is in fact setting pool's priority to 0. Do you have something else in mind? How do you imagine that?

Right now, the priority for my pools are this:

0: Enabled  Strtm Quota 1 Pool 0: stratum+tcp://r6283.g20.rigs.eu.betarigs.com:9115  User:chrison999-6283
1: Enabled  Strtm Quota 1 Pool 1: stratum+tcp://us.clevermining.com:3333  User:1KW9fnXHgQSjEq7RNDWAbgx6DY68rgXVrm
2: Enabled  Strtm Quota 1 Pool 2: stratum+tcp://pool.ipominer.com:3333  User:corion49.USB4
3: Enabled  Strtm Quota 1 Pool 3: stratum+tcp://multi.ghash.io:3333  User:chrison999.USB4
4: Enabled  Strtm Quota 1 Pool 4: stratum+tcp://mine.multicoinpool.org:3310  User:chrison999.USB4

I'd like to change the priority so that ipominer has a higher priority than clevermining, like this:

0: Enabled  Strtm Quota 1 Pool 0: stratum+tcp://r6283.g20.rigs.eu.betarigs.com:9115  User:chrison999-6283
1: Enabled  Strtm Quota 1 Pool 2: stratum+tcp://us.clevermining.com:3333  User:1KW9fnXHgQSjEq7RNDWAbgx6DY68rgXVrm
2: Enabled  Strtm Quota 1 Pool 1: stratum+tcp://pool.ipominer.com:3333  User:corion49.USB4
3: Enabled  Strtm Quota 1 Pool 3: stratum+tcp://multi.ghash.io:3333  User:chrison999.USB4
4: Enabled  Strtm Quota 1 Pool 4: stratum+tcp://mine.multicoinpool.org:3310  User:chrison999.USB4

Currently, to do that using the CgminerMonitor site I'd have to delete all of the pools except betarigs and recreate them in the order that I want.  I saw this in the API-README for cgminer:

poolpriority|N,... (*)
               none        There is no reply section just the STATUS section
                              stating the results of changing pool priorities
                              See usage below

The 'poolpriority' command can be used to reset the priority order of multiple pools with a single command - 'switchpool' only sets a single pool to first priority.  Each pool should be listed by id number in order of preference (first = most preferred)

So, I'm wondering if it would be too difficult to implement the 'poolpriority' command as part of the site.

Thanks!

Regards,

Chris

Chris and all, I've just updated worker details page - the pools section. Now you can change pool priority - move it up and down

[chrison999]

Pool priority functionality works great!  Thanks!

Regards,

Chris

[chrison999]

As I said in my last post, the pool priority function does work.  However, after using it for awhile I've found it to be a bit awkward.  If I want to move the pool that's currently priority 4 to be priority 1 I have to click the "cgminerCommand_poolUp" button 3 times, waiting each time for the command to execute and the rig to update.  It works, but as I said it's also awkward.  The same thing works in reverse, of course...  it currently moves a pool up/down one priority step at a time.

If I'm reading the API-README correctly, the "poolpriority" API call accepts a comma-delimeted list of pool numbers in the order of the desired priority.  If the current priority is "0,1,2,3,4" (pool 0, then pool 1, then pool 2, etc...) and I want to move pool 4 to the front, all that needs to be done is to send a "poolpriority 4,0,1,2,3" API call.

Is that right?  If so, wouldn't it be easier to have a single text-entry "change the pool priority order" box with a "submit" button to accomplish this?

Just a suggestion!  If that's too much effort or doesn't fit in with your design scheme, that's perfectly okay as the current functionality *does* work.

Thanks, again, for all your effort in creating and improving CgminerMonitor!  It's *really* cool stuff and it has made managing my rigs *much* easier!

Regards,

Chris

[cgminermonitor]

Yeah, I have thought about that Chris. However, I found that it is both easy to make a mistake and hard to explain what the user should enter to this textbox. Let's stay with simple current move up/down for now.

Pro tip: you can click move up a pool two times without waiting for previous command to execute. CgminerMonitor just schedules to execute "POOL_URL move up" not "POOL_NUMBER move up".

[chrison999]

No problem.  It was just a suggestion.  And knowing that I don't have to wait for the rig to execute the command and refesh the page makes it a bit quicker.

Thanks!

Chris

[zhinkk]

I would have loved this when I used to mine with my GPU. Great website, looks great and I like that it's free (for now).

[nem2k]

all of my bin files are being created inside my cgminermonitor folder (instead of my sgminer folder). Is this normal? Or is there a way to have them only create in the sgminer folder instead?

[chadwickx16]

Is there a way to Display the pool name on the shared rig page?

Instead of "stratum.nicehash.com:3340" show "NiceHash-Nist5".

[cgminermonitor]

all of my bin files are being created inside my cgminermonitor folder (instead of my sgminer folder). Is this normal? Or is there a way to have them only create in the sgminer folder instead?

What bin files? If that bin files from sgminer I recommend you to check if you navigate to proper directory when launching sgminer.

Is there a way to Display the pool name on the shared rig page?

Instead of "stratum.nicehash.com:3340" show "NiceHash-Nist5".

The problem with that functionality is that not all mining software allows you to specify name of a pool. Therefore for now there is no such a possibility, sorry.

[matrixdog]

Anyone know how to make this run on a avalon 180 ghs/ miner?

[matrixdog]

can anyone help?