Antminer S1 - problem

[elpiczek]

Hi
When I connect my Antminer S1 to the network lose Internet!!?, and all home network (when I scan the network I can see only my computer) Antminera I connect to the router (I'm waiting for the switch may this helps).
When I plug in the Antminer directly to PC (crossover Ethernet cables) I have access but by some 2 min later I must disconnect the cable and connect it again.
When I connect to the router does not have access to, and this happens as I wrote above.

Does anyone have any ideas what is wrong?

That looks like my IPconfig and set Antminer

IPconfig
http://s30.postimg.org/gl0lklpm9/ip_1.jpg

Antminer status:
http://s3.postimg.org/tj8n5ldf7/ant_1.jpg

LAN:
http://s18.postimg.org/8vo0bogyh/ant_lan.jpg

WAN:
http://s18.postimg.org/j70d4c8nt/ant_wan.jpg

I try change in WAN custorers DNS to: 192.168.0.1 but all the time is the same.
 Please help me!!

[1714797882]

1714797882

[1714797882]

1714797882

[1714797882]

1714797882

[1714797882]

1714797882

[1714797882]

1714797882

[1714797882]

1714797882

[windpath]

I would suggest a hard reset by pushing the button shown here:



Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck

[elpiczek]

I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck

OK THX
I do hard reset and now everything working )
I have one more question. How is normal temperature to Antminer S1 on 180GH?

[DubFX]

I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck

OK THX
I do hard reset and now everything working )
I have one more question. How is normal temperature to Antminer S1 on 180GH?

50C max if it's higher then something may be wrong.

[elpiczek]

I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck

OK THX
I do hard reset and now everything working )
I have one more question. How is normal temperature to Antminer S1 on 180GH?

50C max if it's higher then something may be wrong.

I have 45C and fan 2340