Claymore XPM GPU Miner discussion

[seljak]

it is necessary to be strict 24 hours online? and if the Internet disconnect or light? ) ) 

not to mention ypools reliability

[Claymore]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

[jgle]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Can speed up? 

[djm34]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Can speed up? 

Actually v1.5 seems slower, I was around 99k and for the moment I get only 96k

[jgle]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Can speed up? 

Actually v1.5 seems slower, I was around 99k and for the moment I get only 96k

Thank you. I don't try! I feel that the driver is not affected! Before 13.1 to 14.3 after the error "oPENGL" but does not affect the mining! And finally changed to 13.12

[seljak]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Around 10% faster than 1.4 on r9 270. Also able to launch 2 workers without amd drivers or win8 crashing.

[slimdim]

somebody already mained 24 hours?
at me in 19 hours stats -

BALANCE (XPM)
0.24466261

UNCONFIRMED (XPM)
2.22579660

it isn't enough....

2*280x vapor-x

[djm34]

somebody already mained 24 hours?
at me in 19 hours stats -

BALANCE (XPM)
0.24466261

UNCONFIRMED (XPM)
2.22579660

it isn't enough....

2*280x vapor-x

I should be around 24hours (but not straight... so it could be a little more or a little less) with 1 r9 290x, I have at the moment 1.27 confirmed 3.23 unconfirmed (I also found a block, may-be that boosted a bit the payout)
So is this expected ?

[jgle]

somebody already mained 24 hours?
at me in 19 hours stats -

BALANCE (XPM)
0.24466261

UNCONFIRMED (XPM)
2.22579660

it isn't enough....

2*280x vapor-x

You should return to the! The two of us closer, but there is a problem: "Current  speed is up to 1.4 10-chain/day on a single 280x (7970) card that's about 6.6 XPMs/day"
http://Https://bitcointalk.org/index.php? Topic=548230.0
As he said this income or  you say?

[slimdim]

6 it won't be exact I think even from two cards...

[djm34]

somebody already mained 24 hours?
at me in 19 hours stats -

BALANCE (XPM)
0.24466261

UNCONFIRMED (XPM)
2.22579660

it isn't enough....

2*280x vapor-x

You should return to the! The two of us closer, but there is a problem: "Current  speed is up to 1.4 10-chain/day on a single 280x (7970) card that's about 6.6 XPMs/day"
http://Https://bitcointalk.org/index.php? Topic=548230.0
As he said this income or  you say?

except it is solo mining so it something like 6.6 +/- sqrt(6,6) = 6.6 +/-2.5
And actually it is -35+6.6=-28.4 (and lets face it: it won't last...)

[slimdim]

why I solo? I on a ypool

here 2 cards -

[SpeedDemon13]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Can speed up? 

Actually v1.5 seems slower, I was around 99k and for the moment I get only 96k

My total round time improved, now it's around 729~740. This is on a MSI Twin Frozr III HD7970 OC BE.

[Claymore]

I hope all of you have read readme.txt So after 24 hours you will not see good XPM value in your ypool account, it is because it takes up to 24 hours to get good mining speed. But when you drop mining you will get coins for the same time, so mining is fair. To get earning rate immediately after first 24 hours of mining you need to open "stats" tab on ypool and select "blocks found", then click on latest block number that pool found and find your name in the list of all accounts. See the XPM rate that you get per this block. Then open "overall pool stats" tab and see the number of blocks that pool found for 24 hours. Now multiply your block rate by this number of blocks and you will get average earning that you will get within next 24 hours. If you don't like such calculations you can just remember XPM that you got after 24 hours (A) of mining and then wait another 24 hours and check XPM again (B), then calculate earning for last 24 hours as B - A.
And yeah, it's not too fast and easy to calculate XPM profit

[SpeedDemon13]

I hope all of you have read readme.txt So after 24 hours you will not see good XPM value in your ypool account, it is because it takes up to 24 hours to get good mining speed. But when you drop mining you will get coins for the same time, so mining is fair. To get earning rate immediately after first 24 hours of mining you need to open "stats" tab on ypool and select "blocks found", then click on latest block number that pool found and find your name in the list of all accounts. See the XPM rate that you get per this block. Then open "overall pool stats" tab and see the number of blocks that pool found for 24 hours. Now multiply your block rate by this number of blocks and you will get average earning that you will get within next 24 hours. If you don't like such calculations you can just remember XPM that you got after 24 hours (A) of mining and then wait another 24 hours and check XPM again (B), then calculate earning for last 24 hours as B - A.
And yeah, it's not too fast and easy to calculate XPM profit

Is there going to be a future implementation to only do 7ch and up only, totally remove the 4ch?

[Claymore]

Is there going to be a future implementation to only do 7ch and up only, totally remove the 4ch?

Why do you want it? 4ch allows you to see performance quickly. To get some stats for 7ch it's necessary to wait at least an hour.

[SpeedDemon13]

Is there going to be a future implementation to only do 7ch and up only, totally remove the 4ch?

Why do you want it? 4ch allows you to see performance quickly. To get some stats for 7ch it's necessary to wait at least an hour.

So, the 4ch is just used for sampling?

[barabeku]

Is there going to be a future implementation to only do 7ch and up only, totally remove the 4ch?

Why do you want it? 4ch allows you to see performance quickly. To get some stats for 7ch it's necessary to wait at least an hour.

══════════════════════════════════════════════════════════════════════════════
Mon Apr 07 21:58:16 2014
New Block: 479324 - Diff: 10.505214 / 7.000000 <<-- why only 7? not 8 or above
Total/Valid shares: [ 829 / 798 ]  -  Max diff: 10.453696
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [1052229] [    747] [     73] [      8] [      1] [      0] [      0]
  ch/h: [  65433] [ 46.452] [  4.540] [  0.497] [  0.062] [  0.000] [  0.000]
══════════════════════════════════════════════════════════════════════════════
04/07/14-21:58:32 - SHARE FOUND! - (Th#: 3) - DIFF:7.936309 - TYPE:1
HashMultiplier : 720199680

══════════════════════════════════════════════════════════════════════════════
Mon Apr 07 22:00:09 2014
New Block: 479325 - Diff: 10.505504 / 7.000000 <<-- why only 7? not 8 or above
Total/Valid shares: [ 830 / 799 ]  -  Max diff: 10.453696
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [1054264] [    748] [     73] [      8] [      1] [      0] [      0]
  ch/h: [  65432] [ 46.424] [  4.531] [  0.497] [  0.062] [  0.000] [  0.000]
══════════════════════════════════════════════════════════════════════════════
04/07/14-22:01:16 - SHARE FOUND! - (Th#: 1) - DIFF:7.009434 - TYPE:3
HashMultiplier : 492741632
04/07/14-22:01:25 - SHARE FOUND! - (Th#: 1) - DIFF:7.482690 - TYPE:3
HashMultiplier : 4082100

its seem like minimum share in scrypt vardiff, if i found share @ diff above 8.~ that show 1.~ or more share value on ypool dashboard. and if it only found @ DIFF 7.~ ist only show 0.004~ share value.
What's that mean?
I'm still confuse, because my share value per block is very fluctuative.

[SpeedDemon13]

v1.5 released, improved nonce ranges, must help for people who sees "nonce overflow" messages.

Can speed up? 

Actually v1.5 seems slower, I was around 99k and for the moment I get only 96k

My total round time improved, now it's around 729~740. This is on a MSI Twin Frozr III HD7970 OC BE.

I overclocked the gpu core to 1200mhz, now I'm getting a total round time of 657~665. That's about 10% to 15% faster total round times. Seems to be running way more faster.

[Claymore]

So, the 4ch is just used for sampling?

Yes, just to get some stats quickly. It is more objective than "m" numbers.