kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 16, 2011, 12:08:20 PM |
|
Hi I just bought 2 6990 cards and installed on windows 7 with catalyst 11.4 preview. Running the gui poclbm latest version, the speed shown in the summary page remains connected. I have tried 11.3 and still the same. It works when 1 card is installed and doesn't for all gpu cores when 2 cards are installed. Anyone having the same issue?
Cheers!
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
|
April 16, 2011, 04:37:56 PM |
|
You may need one of those null video connects. Also try disabling crossfire temporarily and see if you're able to address the video card cores.
|
|
|
|
thelasttrueone
Newbie
Offline
Activity: 28
Merit: 0
|
|
April 16, 2011, 06:50:36 PM |
|
Could be the same problem I was having, try adding "--platform=0" to the arguments box.
|
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 17, 2011, 02:08:18 AM |
|
Hi thanks for the replies. I have connected a null adapter and is working as tested when i was using 5850 + 5970. It seems to have the same issue with a pair of 5970. As of now the best that I can get the miner to run is on 3 gpus leaving the 4th gpu to run at 48k. I have also tested each 6990 independently and all works well.
So is it a question of windows + miner not being able to run 2 x 6990 or 2 x 5970? I have tested with crossfire cable attached it works but at a very low hash rate. Without the cable attached and I can get 3 out of 4 gpu cores mining properly. This is a troubling issue as I have just purchased these 6990.
Quick question does windows 7 support 2 x 6990 + 2 x 5970 ? I read some where that it does and some where that it doesnt. Has anyone tested it?
|
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 17, 2011, 02:16:33 AM |
|
thelasttrueone
did u manage to get 2 x 6990 or 2 x 5970 running without xfire in windows 7 with that flag? I tried but it will not run. I am totally at a loss now.
|
|
|
|
[Tycho]
|
|
April 17, 2011, 02:24:41 AM |
|
Hi thanks for the replies. I have connected a null adapter and is working as tested when i was using 5850 + 5970. It seems to have the same issue with a pair of 5970. As of now the best that I can get the miner to run is on 3 gpus leaving the 4th gpu to run at 48k. I have also tested each 6990 independently and all works well.
So is it a question of windows + miner not being able to run 2 x 6990 or 2 x 5970? I have tested with crossfire cable attached it works but at a very low hash rate. Without the cable attached and I can get 3 out of 4 gpu cores mining properly. This is a troubling issue as I have just purchased these 6990.
Quick question does windows 7 support 2 x 6990 + 2 x 5970 ? I read some where that it does and some where that it doesnt. Has anyone tested it?
I'm mining on Windows XP with 2x5970, works fine but you have to enable CrossfireX on BOTH cards in CCC (for all 4 GPU to be available in poclbm) and use old version of poclbm on slave GPUs.
|
Welcome to my bitcoin mining pool: https://deepbit.net - Both payment schemes (including PPS), instant payout, no invalid blocks ! ICBIT Trading platform : USD/BTC futures trading, Bitcoin difficulty futures ( NEW!). Third year in bitcoin business.
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 17, 2011, 02:34:02 AM |
|
Hi tycho thanks for the prompt reply, so you are saying that I have to attached the xfire cable?
Also by slaving u mean I can add addition GPUs inaddition to the 2x 6990?
Also which version would u recommend?
|
|
|
|
[Tycho]
|
|
April 17, 2011, 03:48:06 AM |
|
Hi tycho thanks for the prompt reply, so you are saying that I have to attached the xfire cable? Also by slaving u mean I can add addition GPUs inaddition to the 2x 6990? Also which version would u recommend?
No, you don't need to attach the cable. Open your Catalyst Control Center, find a "CrossfireX" page and enable the checkbox for both cards. Make sure that at least one monitor or dummy is plugged into each of the cards and enabled in CCC. Each of the cards has two GPUs, one master and one slave. There may be some problems when mining on slave GPUs with latest poclbm version.
|
Welcome to my bitcoin mining pool: https://deepbit.net - Both payment schemes (including PPS), instant payout, no invalid blocks ! ICBIT Trading platform : USD/BTC futures trading, Bitcoin difficulty futures ( NEW!). Third year in bitcoin business.
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 17, 2011, 06:13:11 AM |
|
Hi Tycho I think i know what u mean, you are refering to the internal crossfire of 5970 right? I think 6990 might not have that option from the menu. Anyway I am running it in crossfire mode with the non gui version of poclbm. The hash rates however fluctuates alot and can't stay constant. Any solution for that? My previous 5970 + 5850 on that rig can run at 99% load. It really baffles me..But thanks alot for your advice
|
|
|
|
thelasttrueone
Newbie
Offline
Activity: 28
Merit: 0
|
|
April 17, 2011, 08:10:49 PM |
|
No my setup is different from that. The error I was correcting stemmed from 11.3 and 2.3 I think. Showing what your console says would be useful to help troubleshoot.
|
|
|
|
bitjet
|
|
April 17, 2011, 10:16:32 PM |
|
There may be some problems when mining on slave GPUs with latest poclbm version.
What problems are you talkign about?
|
|
|
|
[Tycho]
|
|
April 17, 2011, 10:35:24 PM |
|
There may be some problems when mining on slave GPUs with latest poclbm version.
What problems are you talkign about? "Verification failed" messages and crashes when share is found.
|
Welcome to my bitcoin mining pool: https://deepbit.net - Both payment schemes (including PPS), instant payout, no invalid blocks ! ICBIT Trading platform : USD/BTC futures trading, Bitcoin difficulty futures ( NEW!). Third year in bitcoin business.
|
|
|
nster
|
|
April 18, 2011, 12:52:21 AM |
|
It is a well known fact that for now, 6990s can only be mined with linux
|
167q1CHgVjzLCwQwQvJ3tRMUCrjfqvSznd Donations are welcome Please be kind if I helped
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 18, 2011, 01:18:31 AM |
|
I guess ppl shld stay clear of the 6990 series for mining. I am left with no choice but to mine inefficiently. Just invested usd 1.5k on the two cards and they are worst off then the 5970.
|
|
|
|
Garrett Burgwardt
|
|
April 18, 2011, 02:29:26 AM |
|
It is a well known fact that for now, 6990s can only be mined with linux
That's just wrong... as I type this, I see the command prompt windows telling me that my 6990 is still hashing at 330mh/s per core.
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
|
April 18, 2011, 02:36:35 AM |
|
That's just wrong... as I type this, I see the command prompt windows telling me that my 6990 is still hashing at 330mh/s per core.
Details? Miner, OS, Driver versions, etc.
|
Buy & Hold
|
|
|
Garrett Burgwardt
|
|
April 18, 2011, 02:41:57 AM |
|
That's just wrong... as I type this, I see the command prompt windows telling me that my 6990 is still hashing at 330mh/s per core.
Details? Miner, OS, Driver versions, etc. Poclbm, not sure what version but an older one, 11.4 preview (23rd I believe, as opposed to 7th), 7 x64 Ultimate, Visiontek 6990
|
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 18, 2011, 03:47:06 AM |
|
Hi Thekid are you running dual 6990? Also what are your CCC settings? I tried launching the older versions of poclbm but they will not run. It seems like no opencl device to them when the dual 6990 are not in xfire. Any particular settings you could share ?
|
|
|
|
Garrett Burgwardt
|
|
April 18, 2011, 03:50:51 AM |
|
Just one 6990, and nothing special. Try enabling crossfire? That always broke it for me when I didn't have crossfire enabled.
|
|
|
|
kindle (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
April 18, 2011, 04:13:17 AM |
|
Hey is there an option for internal xfire for a 6990? I looked and didnt have the same option as that in the 5970 CCC. Could I have missed out some thing? THanks for your help anyways =)
|
|
|
|
|