csa1234
Full Member
Offline
Activity: 289
Merit: 100
O2-Protocol.com Carbon Offset DeFi
|
|
May 29, 2014, 04:32:32 PM |
|
can someone PM me the IP and port number of the XPM pool? plz
Look on page 11 port 8081 is definatelly not the port to connect thru.... anybody know the port number? Try 162.244.25.26 no port, no fee, use at your own risk Pool donation addy is AWHqZqmAwPgmjiDnZVHWdD8t4ug2QF6tPi i want to use extremal pool, i dont trust anonymous or unknown pools
|
O2-Protocol.com Carbon Offset DeFi
|
|
|
primer10
|
|
May 29, 2014, 04:37:07 PM |
|
can someone PM me the IP and port number of the XPM pool? plz
Look on page 11 port 8081 is definatelly not the port to connect thru.... anybody know the port number? 8081 is the web interface.
|
|
|
|
SpeedDemon13
|
|
May 29, 2014, 04:43:30 PM |
|
can someone PM me the IP and port number of the XPM pool? plz
Look on page 11 port 8081 is definatelly not the port to connect thru.... anybody know the port number? Try 162.244.25.26 no port, no fee, use at your own risk Pool donation addy is AWHqZqmAwPgmjiDnZVHWdD8t4ug2QF6tPi i want to use extremal pool, i dont trust anonymous or unknown pools The pool is safe, been using it for a week or so now with no issues...
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
primer10
|
|
May 29, 2014, 05:21:31 PM |
|
eXtremal, any updates to the miner?
|
|
|
|
MarcusDe
|
|
May 29, 2014, 05:36:04 PM |
|
Hi, I've made new pool for datacoin. In miner config.txt use: server ip: 92.222.24.57, port: 6666, as address use your datacoin address. Web stats are here: http://92.222.24.57:6680/Pool will send coins to your datacoin address when you mine more than 11 DTC, when they have mature to 100 confirmations. With GPUs that will be faster than you think :-D Sample miner working: Work received: height=339420 diff=9.7432844 latency=32ms GPU 0 found share: 7-ch type 2 GPU 0 found share: 8-ch type 2 Share accepted. Share accepted.
Use on your own risk! Good luck and have fun! Marcus.
|
|
|
|
SpeedDemon13
|
|
May 29, 2014, 07:51:10 PM |
|
Hi, I've made new pool for datacoin. In miner config.txt use: server ip: 92.222.24.57, port: 6666, as address use your datacoin address. Web stats are here: http://92.222.24.57:6680/Pool will send coins to your datacoin address when you mine more than 11 DTC, when they have mature to 100 confirmations. With GPUs that will be faster than you think :-D Sample miner working: Work received: height=339420 diff=9.7432844 latency=32ms GPU 0 found share: 7-ch type 2 GPU 0 found share: 8-ch type 2 Share accepted. Share accepted.
Use on your own risk! Good luck and have fun! Marcus. Does the madMAx xpm work with it? Or does it need a modded version?
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
MarcusDe
|
|
May 29, 2014, 08:29:22 PM |
|
Does the madMAx xpm work with it? Or does it need a modded version?
Yes, miner from 1st page of this thread works in 100%, I use linux version mostly, but just checked it on my 270X on Windows, and was able to get 50 cpd with little tweaking.
|
|
|
|
rots
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 30, 2014, 01:28:56 AM |
|
Is your pool ddos protected? or you will suffer same problem with madMAx510510 Hi, I've made new pool for datacoin. In miner config.txt use: server ip: 92.222.24.57, port: 6666, as address use your datacoin address. Web stats are here: http://92.222.24.57:6680/Pool will send coins to your datacoin address when you mine more than 11 DTC, when they have mature to 100 confirmations. With GPUs that will be faster than you think :-D Sample miner working: Work received: height=339420 diff=9.7432844 latency=32ms GPU 0 found share: 7-ch type 2 GPU 0 found share: 8-ch type 2 Share accepted. Share accepted.
Use on your own risk! Good luck and have fun! Marcus. Does the madMAx xpm work with it? Or does it need a modded version?
|
|
|
|
ap1
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 30, 2014, 02:38:07 AM Last edit: May 30, 2014, 02:55:13 AM by ap1 |
|
I am giving it a try for a day and see how it actually got paid compare with XPM... Is there a fee in your pool? re: CPD, xpmclient still shows the original primecoin 10-ch data... I assume it is roughly 10x for 9-ch of DTC but then 270X with 50cpd is doing much more than 10x... EDIT: "Your workers" on the web interface doesn't work neither... so it is no way to know the true cpd... Does the madMAx xpm work with it? Or does it need a modded version?
Yes, miner from 1st page of this thread works in 100%, I use linux version mostly, but just checked it on my 270X on Windows, and was able to get 50 cpd with little tweaking.
|
|
|
|
LongAndShort
Legendary
Offline
Activity: 1078
Merit: 1050
|
|
May 30, 2014, 02:55:23 AM |
|
I am giving it a try for a day and see how it actually got paid compare with XPM... Is there a fee in your pool? re: CPD, xpmclient still shows the original primecoin 10-ch data... I assume it is roughly 10x for 9-ch of DTC but then 270X with 50cpd is doing much more than 10x... EDIT: Your worker web interface doesn't work neither... so it is no way to know the true cpd... Does the madMAx xpm work with it? Or does it need a modded version?
Yes, miner from 1st page of this thread works in 100%, I use linux version mostly, but just checked it on my 270X on Windows, and was able to get 50 cpd with little tweaking. Datacoin diff is 9 so i think he means 50x 9ch! Your miner says the true cpd targeting 10ch!
|
|
|
|
ap1
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 30, 2014, 02:59:56 AM |
|
Datacoin diff is 9 so i think he means 50x 9ch! Your miner says the true cpd targeting 10ch!
Yes I know the miner shows 10ch, but if 9ch cpd is approximately 10 times of 10ch than his little tweak is way more than little as it means a 270x can do 5cpd for 10ch... of course, it is all rough estimation?
|
|
|
|
LongAndShort
Legendary
Offline
Activity: 1078
Merit: 1050
|
|
May 30, 2014, 03:14:08 AM |
|
Datacoin diff is 9 so i think he means 50x 9ch! Your miner says the true cpd targeting 10ch!
Yes I know the miner shows 10ch, but if 9ch cpd is approximately 10 times of 10ch than his little tweak is way more than little as it means a 270x can do 5cpd for 10ch... of course, it is all rough estimation? idk mate i wouldn't take his calculations as gospel id just mine and be happy with it. Go and talk on the datacoin threads for someone to tweak it i guess
|
|
|
|
MarcusDe
|
|
May 30, 2014, 05:33:15 AM Last edit: May 30, 2014, 06:31:09 AM by MarcusDe |
|
If you change TARGET in .cl files, make new kernel.bin then your CPD in stats also will change. edit: 270X settings for DTC: #define SIZE 4096 // Size of local sieve array (must be multiple of 1024) #define LSIZE 256 // Local worksize for sieve (don't change this) #define STRIPES 400 // Number of sieve segments (you may tune this) #define WIDTH 20 // Sieve width (includes extensions, you may tune this) #define PCOUNT 38400 // Number of sieve primes (must be multiple of 256, you should tune this, 40960 is for 280X) #define SCOUNT PCOUNT // Don't change it #define TARGET 9 // Target for s_sieve
|
|
|
|
MarcusDe
|
|
May 30, 2014, 07:16:17 AM |
|
What I noticed is when I use single card its CDP is reported to pool, but when I use f.e. 4 cards miner shows CDP but pool is not. I will try to investigate it in next few days and broken ADL under linux too.
|
|
|
|
wayla
Member
Offline
Activity: 71
Merit: 10
Wayla is sometimes a man!
|
|
May 30, 2014, 08:39:16 AM |
|
If you change TARGET in .cl files, make new kernel.bin then your CPD in stats also will change. edit: 270X settings for DTC: #define SIZE 4096 // Size of local sieve array (must be multiple of 1024) #define LSIZE 256 // Local worksize for sieve (don't change this) #define STRIPES 400 // Number of sieve segments (you may tune this) #define WIDTH 20 // Sieve width (includes extensions, you may tune this) #define PCOUNT 38400 // Number of sieve primes (must be multiple of 256, you should tune this, 40960 is for 280X) #define SCOUNT PCOUNT // Don't change it #define TARGET 9 // Target for s_sieve
how to make the kernel.bin?
|
And sometimes a woMAN.................
|
|
|
MarcusDe
|
|
May 30, 2014, 10:26:47 AM |
|
If you change TARGET in .cl files, make new kernel.bin then your CPD in stats also will change. edit: 270X settings for DTC: #define SIZE 4096 // Size of local sieve array (must be multiple of 1024) #define LSIZE 256 // Local worksize for sieve (don't change this) #define STRIPES 400 // Number of sieve segments (you may tune this) #define WIDTH 20 // Sieve width (includes extensions, you may tune this) #define PCOUNT 38400 // Number of sieve primes (must be multiple of 256, you should tune this, 40960 is for 280X) #define SCOUNT PCOUNT // Don't change it #define TARGET 9 // Target for s_sieve
how to make the kernel.bin? You have to have gpu/ folder inside miner.exe location, with *.cl files. Rename old kernel to kernel.bin.old for safety. Run miner, new kernel should compile. Done.
|
|
|
|
ap1
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 30, 2014, 10:31:56 AM |
|
I didn't mine much XPM so even I plan to donate 10% to MadMax it is just a few coins... and I may not mine XPM any more as the difficulties raised to a point that makes it not much profitable... But I think I can make some contribution instead of donation As MadMax said he used cgminer adl.cpp, which I think is a copy of some sample code too. He changed it from c to cpp but nothing big is changed. I figured out there are 2 things to make it works. Like using cgminer, you need to set export DISPLAY=:0 otherwise the ADL_Main_Control_Create seems thinking no active adaptor available giving "ADL Initialisation Error! Error" After fixing this there is a second error from ADL_Adapter_AdapterInfo_Get. I checked the error code and it said one parameter is wrong/mismatch. This is subtle, and not sure if only works in my case. I found that it is sizeof argument ... maybe in Windows it is default to 32bit but in Linux 64bit for etc. I cast it to unsigned long and it works. i.e. result = ADL_Adapter_AdapterInfo_Get (lpInfo, (unsigned long) sizeof (AdapterInfo) * iNumberAdapters); See if MadMax or eXtremal can compile xpmclient for Linux distribution.
|
|
|
|
ap1
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 30, 2014, 10:38:04 AM |
|
If you change TARGET in .cl files, make new kernel.bin then your CPD in stats also will change. edit: 270X settings for DTC: #define SIZE 4096 // Size of local sieve array (must be multiple of 1024) #define LSIZE 256 // Local worksize for sieve (don't change this) #define STRIPES 400 // Number of sieve segments (you may tune this) #define WIDTH 20 // Sieve width (includes extensions, you may tune this) #define PCOUNT 38400 // Number of sieve primes (must be multiple of 256, you should tune this, 40960 is for 280X) #define SCOUNT PCOUNT // Don't change it #define TARGET 9 // Target for s_sieve
how to make the kernel.bin? You have to have gpu/ folder inside miner.exe location, with *.cl files. Rename old kernel to kernel.bin.old for safety. Run miner, new kernel should compile. Done. I found out how to compile the cl when I checked the code too But maybe Linux driver issue or so, I cannot compile the kernel. Using device 0 as GPU 0 Using device 1 as GPU 1 Compiling ... Source: 65657 bytes binsize = 427808 bytes OpenCL error: -30 at ../xpmclient.cpp:852 Actually I tried eXtremal's original open source miner too and never compile right neither. He said AMD SDK is buggy and I used ATI driver compiler but still not successful.
|
|
|
|
MarcusDe
|
|
May 30, 2014, 10:39:07 AM |
|
I will compile it today evening, now I'm in work, and then 400km to travel :-) Thanks for sharing solution!
|
|
|
|
MarcusDe
|
|
May 30, 2014, 10:41:19 AM |
|
I found out how to compile the cl when I checked the code too But maybe Linux driver issue or so, I cannot compile the kernel. Using device 0 as GPU 0 Using device 1 as GPU 1 Compiling ... Source: 65657 bytes binsize = 427808 bytes OpenCL error: -30 at ../xpmclient.cpp:852 Actually I tried eXtremal's original open source miner too and never compile right neither. He said AMD SDK is buggy and I used ATI driver compiler but still not successful. I've found subtle solution if you have more than 1 card. Disable all BUT 1 card in config.txt. Run xpmminer. kernel.bin is created. Shut down miner. Undo changes in config. Run with normal config. Works for me.
|
|
|
|
|