hmblm1245 (OP)
|
|
January 19, 2012, 11:12:25 PM Last edit: January 20, 2012, 04:26:56 PM by hmblm1245 |
|
So i order a few 5850s from bens outlet (OEM) built a new win764 box with 11.12 and SDK2.6. using cgminer i set the following
Engine 900 Mem 300 volts (default) And my results were locking and freezing right after i launched cgminer. so i dropped the engine to 840 and now my mhs is 300. I switched to SDK 2.4 and the 11.6 driver package and get the same results. This feels a bit low for a 5850.
my current hardware config is
890fxa gd70 1 gb mem sempron 140 500 watt psu
any thoughts?
|
|
|
|
|
|
|
|
The grue lurks in the darkest places of the earth. Its favorite diet is adventurers, but its insatiable appetite is tempered by its fear of light. No grue has ever been seen by the light of day, and few have survived its fearsome jaws to tell the tale.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
dirtycat
|
|
January 19, 2012, 11:19:55 PM |
|
i run mine at 825/300 and i get 290mhs
I also had the same problem with it lockin up and crashin at 850
|
poop!
|
|
|
malevolent
can into space
Legendary
Offline
Activity: 3472
Merit: 1721
|
|
January 19, 2012, 11:28:45 PM |
|
Mine doesnt lock and crash @ 940-950 (depends on the cards) / 300, with standard (1.088V) voltage (it's a sapphire extreme non-ref) What brand is it? Reference or non-ref?
|
Signature space available for rent.
|
|
|
hmblm1245 (OP)
|
|
January 20, 2012, 12:03:11 AM |
|
Mine doesnt lock and crash @ 940-950 (depends on the cards) / 300, with standard (1.088V) voltage (it's a sapphire extreme non-ref) What brand is it? Reference or non-ref?
its an OEM Reference. I also have a visiontek reference running at 920/500 on another box doing 370 on 11.6 and 2.4 sdk. it seems really low to me
|
|
|
|
hmblm1245 (OP)
|
|
January 20, 2012, 04:26:34 PM |
|
So i solved my issue. I completed the steps in the following order
1. deleted the partition 2. installed win7 3. installed ati 11.11 drivers pack 4. installed SDK 2.5 5. installed drivers for the rest of the missing hardware 6. configure CGminer as followed Engine 920 mem 500 volts (removed line from json) default the rest fan 45% temp 65 -70c
Now i'm getting 370 stable with one card so i'm guessing that it must have been some left overs from the SDK2.6/11.12 driver package.
|
|
|
|
siggy
|
|
January 20, 2012, 07:00:46 PM |
|
hey.. thanks for posting this... I had/have the same issue with those very same Ben's Outlet cards....
just to clarify one point... the exact drivers you are using are 11.11c ?
thanks, Sigg
|
|
|
|
hmblm1245 (OP)
|
|
January 20, 2012, 07:38:03 PM |
|
Um not sure. in the CCC under info - software its driver package version 8.911-111025a-128243c-ati
hope this helps
|
|
|
|
yjacket
|
|
January 26, 2012, 01:03:32 AM |
|
So i solved my issue. I completed the steps in the following order
1. deleted the partition 2. installed win7 3. installed ati 11.11 drivers pack 4. installed SDK 2.5 5. installed drivers for the rest of the missing hardware 6. configure CGminer as followed Engine 920 mem 500 volts (removed line from json) default the rest fan 45% temp 65 -70c
Now i'm getting 370 stable with one card so i'm guessing that it must have been some left overs from the SDK2.6/11.12 driver package.
Are you getting the 100 cpu bug?
|
|
|
|
hmblm1245 (OP)
|
|
January 26, 2012, 01:31:56 AM Last edit: January 26, 2012, 02:53:27 PM by hmblm1245 |
|
nope. CPU runs at 3% - 7% EDIT it is not 100% i think the 12.1 preview drivers fix it
|
|
|
|
buttons252
|
|
January 26, 2012, 02:29:52 AM |
|
370 from one card??? doesnt it take like 1000mhz core to get 325m/hash ??
my 5830s clocked at 942 only get 290m/hash but ive been to lazy to get SDK 2.1
|
|
|
|
hmblm1245 (OP)
|
|
January 26, 2012, 02:45:14 AM |
|
its a 5850 not 5830
|
|
|
|
|