[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[42davidsmith42]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

Where i can find compiled version?

Sorry buddy, I've compiled version only for Ubuntu x64 14.04 and for BAMT.
Do you need it?

I would like the BAMT version.  Or directions on how to compile it myself. 

[junkun13]

windows version pls

[lasybear]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

Where i can find compiled version?

Sorry buddy, I've compiled version only for Ubuntu x64 14.04 and for BAMT.
Do you need it?

I would like the BAMT version.  Or directions on how to compile it myself. 

Code:

git clone https://github.com/lasybear/sph-sgminer_x11mod
cd ./sph-sgminer_x11mod
< Please insert AMD ADL files adl_defines.h adl_sdk.h adl_structures.h to folder ./sph-sgminer_x11mod/ADL_SDK.
They can be found at http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/ >
./autogen.sh
./configure
make

That's all )

[thefrog]

ok confirmed the pool is messed with. it has been hard coded to assign a quota of 98% to any pool you add leaving the 2% for the hidden pool.

this means if you add a backup pool it will split your hash to it, only way to fix is to manually disable backup pools then you get full hash to your default pool.

if you press P to manually change pool strategy you will se there are 2 balance options and no failover

It's just not displayed.
You can just enter 0, and it changes to fail over.
The option 0 is just not being displayed.

[thefrog]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

Where i can find compiled version?

Sorry buddy, I've compiled version only for Ubuntu x64 14.04 and for BAMT.
Do you need it?

I would like the BAMT version.  Or directions on how to compile it myself. 

Code:

git clone https://github.com/lasybear/sph-sgminer_x11mod
cd ./sph-sgminer_x11mod
< Please insert AMD ADL files adl_defines.h adl_sdk.h adl_structures.h to folder ./sph-sgminer_x11mod/ADL_SDK.
They can be found at http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/ >
./autogen.sh
./configure
make

That's all )

Testing it right now., 280x, 1120,1500

 GPU 0:  69.0C 1042RPM | 3.155M/3.310Mh/s | R:  0.0% HW:0 WU:0.064/m I:15
 GPU 1:  72.0C 9999RPM | 3.084M/3.248Mh/s | R:  0.0% HW:0 WU:0.064/m I:15
 GPU 2:  59.0C 1470RPM | 3.044M/3.189Mh/s | R:  0.0% HW:0 WU:0.065/m I:15

[iru786]

Windows version

[daeminium]

Windows version

X2 xD

[Remember remember the 5th of November]

Windows version

I've provided one in this thread https://bitcointalk.org/index.php?topic=623409.0, a lot of people have used it so far.

[drr0ss]

Windows version

Build from source:


https://docs.google.com/file/d/0B3YMX5z3l5htWlo0SmVlbjcwdGs/edit?pli=1

[FoldingTime]

I've done a 6 hour test of this versus the official sgminer 4.1.0-103

Results as follows:

New one: 3.1Mh/s shown on sgminer, pool shows 2.2Mh/s
Official: 2.1Mh/s shown on sgminer, pool shows 2.55Mh/s

Official version mines more coins.

Yes, I did block the port on my firewall to stop the donation to find out what this can actually do.

I think there has been some manipulation on sgminer display. DON'T BELIEVE IT.

You have been warned.

[quovadiz]

I've done a 6 hour test of this versus the official sgminer 4.1.0-103

Results as follows:

New one: 3.1Mh/s shown on sgminer, pool shows 2.2Mh/s
Official: 2.1Mh/s shown on sgminer, pool shows 2.55Mh/s

Official version mines more coins.

Yes, I did block the port on my firewall to stop the donation to find out what this can actually do.

I think there has been some manipulation on sgminer display. DON'T BELIEVE IT.

You have been warned.

My results are a bit different:
https://bitcointalk.org/index.php?topic=616786.msg6903002#msg6903002
How did u do the test?
Same rig 6 hours by 6 hours? In 6 hours lot of conditions could change...
Hashrate shown in the pool dashborad is not accurate.
What about the earnings?
Was it a prop-pay pool?

[RoyalSands]

I've done a 6 hour test of this versus the official sgminer 4.1.0-103

Results as follows:

New one: 3.1Mh/s shown on sgminer, pool shows 2.2Mh/s
Official: 2.1Mh/s shown on sgminer, pool shows 2.55Mh/s

Official version mines more coins.

Yes, I did block the port on my firewall to stop the donation to find out what this can actually do.

I think there has been some manipulation on sgminer display. DON'T BELIEVE IT.

You have been warned.

My results are a bit different:
https://bitcointalk.org/index.php?topic=616786.msg6903002#msg6903002
How did u do the test?
Same rig 6 hours by 6 hours? In 6 hours lot of conditions could change...
Hashrate shown in the pool dashborad is not accurate.
What about the earnings?
Was it a prop-pay pool?

He is just trying to keep other people from using the miner even though he knows it works.  Some people are just like that.

[reda]

I've done a 6 hour test of this versus the official sgminer 4.1.0-103

Results as follows:

New one: 3.1Mh/s shown on sgminer, pool shows 2.2Mh/s
Official: 2.1Mh/s shown on sgminer, pool shows 2.55Mh/s

Official version mines more coins.

Yes, I did block the port on my firewall to stop the donation to find out what this can actually do.

I think there has been some manipulation on sgminer display. DON'T BELIEVE IT.

You have been warned.

My results are a bit different:
https://bitcointalk.org/index.php?topic=616786.msg6903002#msg6903002
How did u do the test?
Same rig 6 hours by 6 hours? In 6 hours lot of conditions could change...
Hashrate shown in the pool dashborad is not accurate.
What about the earnings?
Was it a prop-pay pool?

He is just trying to keep other people from using the miner even though he knows it works.  Some people are just like that.

yep and if you knew the whole truth about this x11 algo and early private gpu miner you'll start to puke

[rentahash]

 GPU  0:                | 1.964M/1.967Mh/s | R:  0.0% HW:0 WU:0.030/m I:15
 GPU  1:                | 1.954M/1.960Mh/s | R:  0.0% HW:0 WU:0.027/m I:15
 GPU  2:                | 1.951M/1.960Mh/s | R:  0.0% HW:0 WU:0.025/m I:15
 GPU  3:                | 1.953M/1.958Mh/s | R:  0.0% HW:0 WU:0.022/m I:15

MSI 270

so far looks promising

[ReiMomo]

The official miner won't even start for me, the cool thing is the Remember remember the 5th of November's miner makes the desktop usable at I 15, at I 16 I have driver crash!

[Remember remember the 5th of November]

The official miner won't even start for me, the cool thing is the Remember remember the 5th of November's miner makes the desktop usable at I 15, at I 16 I have driver crash!

The miner is a fork of sph-sgminer with changes made by lasybear to work with the OpenCL kernel that was hidden in this sgminer by girino, which I extracted through a process called reverse engineering, which isn't exactly easy. I then compiled binaries for Windows and fixed a bug with an unitialized variable, so yeah, credit goes to the two of us, not just me.

[ReiMomo]

KK, lasybear and Remember remember the 5th of November 

I wish I could learn to do that.

[jeky]

lasybear: I've already added some my side, may be you also want to add some features on your sgminer fork:

https://github.com/nicehash/sph-sgminer/commits/master

I think that some about pool switching, idle and restart could be useful if anyone wants to use NiceHash

\Jeky

[Remember remember the 5th of November]

lasybear: I've already added some my side, may be you also want to add some features on your sgminer fork:

https://github.com/nicehash/sph-sgminer/commits/master

I think that some about pool switching, idle and restart could be useful if anyone wants to use NiceHash

\Jeky

Btw, somebody needs to notify the main dev of sph-sgminer that it has a bug with in the gen_stratum_work function, it uses an uninitialized variable as an index that causes undefined behaviour. Whoever added that commit forgot to write the actual loop.

[jamesbond700]

How do I go about getting this to run on BAMT?