psahx
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2014, 07:16:35 AM |
|
I made noise cancelling panels with HVAC fiber ductboard.I installed them in a restaurant that had hard wood ceilings & concrete floors,it only took a few well placed panels to stop the echo ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I cut all edges at a 45 degree angle & sprayed glue on the fiberglass side & applied a fabric to it.That keeps the fiberglass from flaking off & gives a classy look. The other side has the silver aluminized facing which is kinda tough.It can be punctured/scratched/ripped though.You can paint it any color you want. Each sheet is 10 ft x 4 ft x 1 inch or 1 1/2 thick & costs about $35 a sheet. Just an idea ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Can you please post some photos as well? Sounds very attractive ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2014, 02:37:18 PM |
|
First pics! (Pardon some of the protective paper). ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Fresh air enters the cabinet from the bottom of the front door and exits out the top of the back door with a -10dB in noise. imageThis 8U quiet cabinet would be perfect for 2x Spondoolies-Tech SP30. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Cool man, this is exactly what one will need, to run some SP at home!!! I liked very much the idea with the vent duct, thus you can remove the hot air from SPs directly out from building. Does it come with a blower? It will not include a blower. You local home improvement store should have 'em in stock.
|
|
|
|
|
jtlightner
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2014, 06:45:00 PM |
|
Spotswood, are you using 80/20 parts for the frame?
Certainly looks like 80/20 parts I have seen in the past...
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2014, 07:01:47 PM |
|
Spotswood, are you using 80/20 parts for the frame?
Certainly looks like 80/20 parts I have seen in the past...
Its made from aluminum t-slot extrusions, not 80/20, but another vendor.
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 27, 2014, 09:56:37 PM |
|
I made noise cancelling panels with HVAC fiber ductboard.I installed them in a restaurant that had hard wood ceilings & concrete floors,it only took a few well placed panels to stop the echo ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I cut all edges at a 45 degree angle & sprayed glue on the fiberglass side & applied a fabric to it.That keeps the fiberglass from flaking off & gives a classy look. The other side has the silver aluminized facing which is kinda tough.It can be punctured/scratched/ripped though.You can paint it any color you want. Each sheet is 10 ft x 4 ft x 1 inch or 1 1/2 thick & costs about $35 a sheet. Just an idea ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Can you please post some photos as well? Sounds very attractive ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Sorry,but I lost the pics when a HDD failed a few years ago ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) You can use ANY fabric you want almost,it needs to be abit porous though,to let the sound in,otherwise it kinda defeats the principal ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) The panels were 3 ft x 4 ft & a few were 2 1/2 ft x 6 ft.You could make them almost any shape,just need to work the fabric around the curves,can be tricky ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) My customer had a carpenter come in later & put them in wood frames,it turned out really nice!! Wish I still had those pics!!! ![Angry](https://bitcointalk.org/Smileys/default/angry.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2014, 11:47:22 PM |
|
I'm now ready to take orders for this 8U quiet server cabinet. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi715.photobucket.com%2Falbums%2Fww153%2FSpotswood_%2FServer%2520racks%2F8U%2520Quiet%2520Cabinet%2F8Uquietcabside1-300_zps7ae6765f.jpg&t=665&c=8O4GZRBe9fW2fA) Features- 19" Rack-mount cabinet
- Entire interior lined with noise absorbing and noise blocking foam (-10dB reduction; video here)
- Front intake via duct/door
- Rear exhaust via duct/door (with a 4x10-inch cutout to connect to exhaust system)
- 4x 8U round hole server rack posts
- Ships flat-packed (from New Hampshire)
SpecificationsForm Factor | 8U | Materials | Aluminum extrusion, aluminum sheeting, acrylic | Supported chassis depth | 23.5-inches (596mm) | Internal Dimensions | Height: 15.5-inches (394mm) Width: 20.5-inches (521mm) Depth: 23.5-inches (596mm) | External Dimensions | Height: 20.5-inches (521mm) Width: 21.5-inches (546mm) Depth: 37.5-inches (957mm) | Weight | 49 pounds (22.3 kg) |
For more info, see here. -Rich
|
|
|
|
wanna4fun
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 100
noobie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2014, 12:49:12 AM |
|
I'm working on this kind of cabinet too. To have better performance with the noise reduction you could use foam for the wall and sound trap for the intake and outcoming air. Below and example of a sound trap. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fp9.storage.canalblog.com%2F98%2F16%2F953989%2F73066775.jpg&t=665&c=K4Cdr39kUVhkpQ)
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2014, 10:49:46 PM |
|
I'm working on this kind of cabinet too. To have better performance with the noise reduction you could use foam for the wall and sound trap for the intake and outcoming air. Below and example of a sound trap.
That looks awesome. This current design attempts to strike a balance between noise reduction and cooling (with more emphasis on cooling atm).
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2014, 10:55:17 PM |
|
Looks like a great product. I love the sleek design. Do you mind taking a picture of front exhaust? I'm curious what it looks like.
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2014, 11:48:56 PM Last edit: August 06, 2014, 12:17:46 AM by Spotswood |
|
Looks like a great product. I love the sleek design. Do you mind taking a picture of front exhaust? I'm curious what it looks like.
I don't have interior pics just yet, but here is the model of the front door. The interior is lined with sound absorbing foam. Air enters the cabinet via the open bottom. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi715.photobucket.com%2Falbums%2Fww153%2FSpotswood_%2FServer%2520racks%2F8U%2520Quiet%2520Cabinet%2FSimpleServerRackFrontDoor_zps190d7863.jpg&t=665&c=K9j3MYGP1SJsqA)
|
|
|
|
wanna4fun
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 100
noobie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 07, 2014, 02:01:03 AM Last edit: August 07, 2014, 02:35:22 AM by wanna4fun |
|
Looks like a great product. I love the sleek design. Do you mind taking a picture of front exhaust? I'm curious what it looks like.
I don't have interior pics just yet, but here is the model of the front door. The interior is lined with sound absorbing foam. Air enters the cabinet via the open bottom. I believe that making the door the way you intake and out take the air is wrong (it seems good on professional product tough). It require to much work and precision to make it effective. After thinking about it I plan to make my sound traps in the cabinet and I want to it to be removable and cleanable. To me, the best is to make big hole and use this component to connect the sound trap with the interior and the exterior of the cabinet. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.e-novelec.fr%2F1160-1705-large_default%2Fmanchon-raccord-male-80-a-500-mm-pour-gaines-souples-ou-conduits-galva-manchons-vmc-unelvent-.jpg&t=665&c=SY8CL1bqjDnFtg) To make the soundtrap, I'm thinking about using plastic box with foam in side. To break the sound, polystyrene plate with foam stick on it. I may have 100% sound reduction ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) What is the program did you use to make 3D model ? EDIT : this is what i think of : then all you have to worry is make sure that air does not go out or in from doors. The most of the noise will come from the air flow ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimg4.hostingpics.net%2Fthumbs%2Fmini_112335quietcabinet.png&t=665&c=14JKvsfAFkIYzw)
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 07, 2014, 04:31:41 AM |
|
Looks like a great product. I love the sleek design. Do you mind taking a picture of front exhaust? I'm curious what it looks like.
I don't have interior pics just yet, but here is the model of the front door. The interior is lined with sound absorbing foam. Air enters the cabinet via the open bottom. I believe that making the door the way you intake and out take the air is wrong (it seems good on professional product tough). It require to much work and precision to make it effective. After thinking about it I plan to make my sound traps in the cabinet and I want to it to be removable and cleanable. To me, the best is to make big hole and use this component to connect the sound trap with the interior and the exterior of the cabinet. To make the soundtrap, I'm thinking about using plastic box with foam in side. To break the sound, polystyrene plate with foam stick on it. I may have 100% sound reduction ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) What is the program did you use to make 3D model ? EDIT : this is what i think of : then all you have to worry is make sure that air does not go out or in from doors. The most of the noise will come from the air flow I use Sketchup.
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 10, 2014, 02:13:16 PM |
|
Interior pics: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi715.photobucket.com%2Falbums%2Fww153%2FSpotswood_%2FServer%2520racks%2F8U%2520Quiet%2520Cabinet%2F8Uquietcabside2InteriorBack-640_zps6ed8cc16.jpg&t=665&c=PBUBLYd7zJoPFQ) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi715.photobucket.com%2Falbums%2Fww153%2FSpotswood_%2FServer%2520racks%2F8U%2520Quiet%2520Cabinet%2F8Uquietcabside2InteriorFront-640_zps007518f8.jpg&t=665&c=f8O9PPgUnr0pzQ)
|
|
|
|
Spotswood (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 13, 2014, 12:39:30 AM Last edit: March 23, 2017, 04:56:25 PM by Spotswood |
|
|
|
|
|
sussanbetcher
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 23, 2017, 10:48:15 AM |
|
It would be useful for many customers as the sale thread for the server rack frames are up now. As there is custom size frames are available many people would be interested in this deal with this reasonable prize. Can you guide me to your services page where I can get more info about the kind of fields you handle? Thanks server rack shelfSussan B.
|
|
|
|
|