[ANN] [CLOAK] Cloakcoin | No Premine | X13 | Decentralized Market and PoSA

[thesociableme]

Order book only show 50 entries....


This graph shows that in reality there is over 31 BTC worth of buy orders....
Go hover over it with your mouse.

wtf, 39 BTC of sell orders, 24 of buy !

bid = buy

ask = sell

Yep, Walls move.... And they have moved since my original post.....

Which all I was trying to say is:   Don't be fooled by the graph on the right.

Do you agree with that?

[1715494500]

1715494500

[1715494500]

1715494500

[1715494500]

1715494500

[gts476]

Order book only show 50 entries....


This graph shows that in reality there is over 31 BTC worth of buy orders....
Go hover over it with your mouse.

wtf, 39 BTC of sell orders, 24 of buy !

bid = buy

ask = sell

Yep, Walls move.... And they have moved since my original post.....

Which all I was trying to say is:   Don't be fooled by the graph on the right.

Do you agree with that?

Agree with don't be fooled by circle, disagree with everything else.

[thesociableme]

CloakSend beta instructions:

Please bear in mind that the CloakSend feature will work seamlessly in your wallet, very shortly, after successful beta tests.

You will not have to do, all of the following.

How to use CloakSend in Beta:

1: Enable coin control: Open CloakCoin wallet > Settings > Options > Display : tick box enable coin control features (experts only!)

2: Click on inputs. Tick the box from the address you wish to send your anonymous Cloak transaction from.

3: Copy that address, you'll need it.

4: Go to the website setup for testing purposes at www.cloaksend.com

5: Get deaddrop address (exchange): fill in the details in the 3 box form and generate the deaddrop by clicking getcloak. You have now told our system to "listen" for this transaction.

6: Copy the deaddrop address and send your CloakCoins to it from Cloakwallet. It will make the transfer of cloak in a highly anonymous way via the exchange for you!

In our initial testing we have been impressed by the speed of this system, not as fast as direct but pretty good  

Please do not send too large amounts until we are fully running after beta, have fun trying it out and look forward to hearing some feedback

When I go to http://www.cloaksend.com

What do I put in the from address field?

[thesociableme]

CloakSend beta instructions:

Please bear in mind that the CloakSend feature will work seamlessly in your wallet, very shortly, after successful beta tests.

You will not have to do, all of the following.

How to use CloakSend in Beta:

1: Enable coin control: Open CloakCoin wallet > Settings > Options > Display : tick box enable coin control features (experts only!)

2: Click on inputs. Tick the box from the address you wish to send your anonymous Cloak transaction from.

3: Copy that address, you'll need it.

4: Go to the website setup for testing purposes at www.cloaksend.com

5: Get deaddrop address (exchange): fill in the details in the 3 box form and generate the deaddrop by clicking getcloak. You have now told our system to "listen" for this transaction.

6: Copy the deaddrop address and send your CloakCoins to it from Cloakwallet. It will make the transfer of cloak in a highly anonymous way via the exchange for you!

In our initial testing we have been impressed by the speed of this system, not as fast as direct but pretty good  

Please do not send too large amounts until we are fully running after beta, have fun trying it out and look forward to hearing some feedback

When I go to http://www.cloaksend.com

What do I put in the from address field?

Nevermind... I understand... Go look at inputs and pick one of them as from address.

But does that mean I need to have one input large enough to cover the amount i want to send?

[tnfsmith]

What I'm trying to tell you is DON'T use the Graph on the right to make decisions!!

Nope, all graphs, indicators, volumes ... its show the figure reference only. Nothings waste here.

[davisgreen]

hmmm- may be its just a hiccup-

i tried sending 1 cloak from bittrex to my wallet through cloaksend.

30 minutes gone- still not arrived.

I hope i did it right- put bittrex address
put my wallet address
put amount.

Get dead drop address- add this address as withdrawal address in bittrex.

waiting still- will update again.

ok- I DID another test from my wallet to another address in my wallet- it worked. but on the explorer if i put the tx id- i can see my receiving address. So how is it anon (may b i am missing something)

But the earlier one never arrived- here http://cloak.blockexplorer.cc/t/Hry8pSKGg as i checked the input box after i initiated the withdrawal (may be)

[thesociableme]

hmmm- may be its just a hiccup-

i tried sending 1 cloak from bittrex to my wallet through cloaksend.

30 minutes gone- still not arrived.

I hope i did it right- put bittrex address
put my wallet address
put amount.

Get dead drop address- add this address as withdrawal address in bittrex.

waiting still- will update again.

Did you click the checkbox next to the input?   

[davisgreen]

hmmm- may be its just a hiccup-

i tried sending 1 cloak from bittrex to my wallet through cloaksend.

30 minutes gone- still not arrived.

I hope i did it right- put bittrex address
put my wallet address
put amount.

Get dead drop address- add this address as withdrawal address in bittrex.

waiting still- will update again.

Did you click the checkbox next to the input?   

yes - i did click it but after i made the withdrawal request

[Uran0s]

I think nothing is gonna happen there today ;/

Wow price is dropping like hell

[thesociableme]

hmmm- may be its just a hiccup-

i tried sending 1 cloak from bittrex to my wallet through cloaksend.

30 minutes gone- still not arrived.

I hope i did it right- put bittrex address
put my wallet address
put amount.

Get dead drop address- add this address as withdrawal address in bittrex.

waiting still- will update again.

Did you click the checkbox next to the input?    

yes - i did click it but after i made the withdrawal request

I'm pretty sure you must to click it before.....
The way I understand this works is it matches the from address,  the to address,  and the amount to determine the forwarding.

I just sent a transaction and it went through almost immediately.

Also I created a new receive address and sent all my coins to myself on the new receive address that way it could only use one from address, dont have to worry about multiple inputs.

Which I would bet the dev will automate for us.  

Here is what I would guess is coming in the next wallet. (as a developer myself).  

Cloak send button which does the following automatically:

• Creates a receive address and sends the amount you want to send to that receive address (moves coins inside your wallet to one address)
• The wallet - Sends a message to the cloaksend service with the newly created receive address, to address, and amount  (This is not a coin transaction)
• The wallet receives the deaddrop address  and initiates the transaction

All the pieces we are doing manually will be automated shortly...
There will be no going to a website and and getting the deaddrop address, it will all be automatic and in the wallet.

I gotta say....   SMART!!

[3months18w]

I think nothing is gonna happen there today ;/

Wow price is dropping like hell

Cloak send is here.

[Uran0s]

I think nothing is gonna happen there today ;/

Wow price is dropping like hell

Cloak send is here.

CLOAKSell ?

[GTO73]

Watching the sell orders, there are always someone who trying tu go prize down, so they rebuy at lower prize, but when this manipulation of the prize stop, then we will se a hhuge up  

[drizzle2405]

Neutrinocoin is being pumped at the moment.  The supply is WAYYYYYY too high to support that price...  It's going to crash and it's going to crash hard...

I don't think that people quite yet understand what cloak has accomplished...

We are going MUCH higher than this...

[Faktorial]

Hello,
I have a problem with my CLOAK wallet. I synchronized it today and it shows me Ballence 110 CLOAK , but there should be 512 CLOAK, block explorer also shows 512. Can someone help me ? or explain where is my 400 CLOAK ?. There are some screenshots of wallet, Block chain and transaction history

http://s29.postimg.org/buhpzr3vb/blockchain.png

http://s12.postimg.org/6r0firexp/penezenka.png

http://s12.postimg.org/kah9ogswt/transakce.png

[zing96]

Hello,
I have a problem with my CLOAK wallet. I synchronized it today and it shows me Ballence 110 CLOAK , but there should be 512 CLOAK, block explorer also shows 512. Can someone help me ? or explain where is my 400 CLOAK ?. There are some screenshots of wallet, Block chain and transaction history

I posted this a while ago - still applies.

1. Re-download the wallet
2. Back up your wallet.dat (copy it outside of %appdata%\CloakCoin)
3. Delete everything inside %appdata%\Cloakcoin (yes your wallet included - you just made a backup and put it somewhere else)
4. create %appdata\CloakCoin\cloakcoin.conf and put this text in the file:

Code:

addnode=cloak.blockexplorer.cc
addnode=119.191.200.5
addnode=188.232.115.205
addnode=37.59.27.14
addnode=5.250.177.24
addnode=212.160.231.239
addnode=109.68.168.5
addnode=37.6.145.32

5. Save cloakcoin.conf and close it.

6.  Start the wallet and let it download the entire block chain.
7.  Close the wallet.
8.  Replace %appdata%\CloakCoin\wallet.dat with the backup you created in step 2.
9.  Open the wallet.
10.  Go to Help -> Debug Window, then click on "Console" and type "repairwallet" (no quotes).

11. Profit.

P.S.  For anyone from now on who has wallet issues (my coins are missing!, it won't sync!, etc, etc, etc) do these steps.  It has saved many wallets over the course of this thread.

[feelsgood]

Hello,
I have a problem with my CLOAK wallet. I synchronized it today and it shows me Ballence 110 CLOAK , but there should be 512 CLOAK, block explorer also shows 512. Can someone help me ? or explain where is my 400 CLOAK ?. There are some screenshots of wallet, Block chain and transaction history

I posted this a while ago - still applies.

1. Re-download the wallet
2. Back up your wallet.dat (copy it outside of %appdata%\CloakCoin)
3. Delete everything inside %appdata%\Cloakcoin (yes your wallet included - you just made a backup and put it somewhere else)
4. create %appdata\CloakCoin\cloakcoin.conf and put this text in the file:

Code:
addnode=221.1.225.100
addnode=115.87.194.125
addnode=24.167.54.233
addnode=37.187.144.69
addnode=37.146.231.71
addnode=185.9.62.204
addnode=24.7.226.120

5. Save cloakcoin.conf and close it.

6.  Start the wallet and let it download the entire block chain.
7.  Close the wallet.
8.  Replace %appdata%\CloakCoin\wallet.dat with the backup you created in step 2.
9.  Open the wallet.
10.  Go to Help -> Debug Window, then click on "Console" and type "repairwallet" (no quotes).

11. Profit.

P.S.  For anyone from now on who has wallet issues (my coins are missing!, it won't sync!, etc, etc, etc) do these steps.  It has saved many wallets over the course of this thread.

How useful it is! Thanks.

[drizzle2405]

Hello,
I have a problem with my CLOAK wallet. I synchronized it today and it shows me Ballence 110 CLOAK , but there should be 512 CLOAK, block explorer also shows 512. Can someone help me ? or explain where is my 400 CLOAK ?. There are some screenshots of wallet, Block chain and transaction history

I posted this a while ago - still applies.

1. Re-download the wallet
2. Back up your wallet.dat (copy it outside of %appdata%\CloakCoin)
3. Delete everything inside %appdata%\Cloakcoin (yes your wallet included - you just made a backup and put it somewhere else)
4. create %appdata\CloakCoin\cloakcoin.conf and put this text in the file:

Code:
addnode=221.1.225.100
addnode=115.87.194.125
addnode=24.167.54.233
addnode=37.187.144.69
addnode=37.146.231.71
addnode=185.9.62.204
addnode=24.7.226.120

5. Save cloakcoin.conf and close it.

6.  Start the wallet and let it download the entire block chain.
7.  Close the wallet.
8.  Replace %appdata%\CloakCoin\wallet.dat with the backup you created in step 2.
9.  Open the wallet.
10.  Go to Help -> Debug Window, then click on "Console" and type "repairwallet" (no quotes).

11. Profit.

P.S.  For anyone from now on who has wallet issues (my coins are missing!, it won't sync!, etc, etc, etc) do these steps.  It has saved many wallets over the course of this thread.

How useful it is! Thanks.

Dagger, can you sticky this to the first page?  The same question has been asked repeatedly.  Thanks!

[Lucif3r]

Hello,
I have a problem with my CLOAK wallet. I synchronized it today and it shows me Ballence 110 CLOAK , but there should be 512 CLOAK, block explorer also shows 512. Can someone help me ? or explain where is my 400 CLOAK ?. There are some screenshots of wallet, Block chain and transaction history

I posted this a while ago - still applies.

1. Re-download the wallet
2. Back up your wallet.dat (copy it outside of %appdata%\CloakCoin)
3. Delete everything inside %appdata%\Cloakcoin (yes your wallet included - you just made a backup and put it somewhere else)
4. create %appdata\CloakCoin\cloakcoin.conf and put this text in the file:

Code:
addnode=221.1.225.100
addnode=115.87.194.125
addnode=24.167.54.233
addnode=37.187.144.69
addnode=37.146.231.71
addnode=185.9.62.204
addnode=24.7.226.120

5. Save cloakcoin.conf and close it.

6.  Start the wallet and let it download the entire block chain.
7.  Close the wallet.
8.  Replace %appdata%\CloakCoin\wallet.dat with the backup you created in step 2.
9.  Open the wallet.
10.  Go to Help -> Debug Window, then click on "Console" and type "repairwallet" (no quotes).

11. Profit.

P.S.  For anyone from now on who has wallet issues (my coins are missing!, it won't sync!, etc, etc, etc) do these steps.  It has saved many wallets over the course of this thread.

How useful it is! Thanks.

Dagger, can you sticky this to the first page?  The same question has been asked repeatedly.  Thanks!

this coin has been smooth until now. It has everything to guaranteed success but the price is still so low. WTF is going on?

[bitcoinbboyce]

Mintpal new coin added today!!!!

https://twitter.com/MintPalExchange